For hoses, look at cable management sleeves or wraps from an office supply
store.
Dennis C.
On Sat, Aug 18, 2018 at 10:23 AM Len Mitchell via CnC-List <
cnc-list@cnc-list.com> wrote:
> Bruce, my cylinders are A250 but there are different size A250s. Navtec
> lists all and you can use the
Thanks Len about the post noting Hercules Hydraulics. Turns out they're only a
few miles from me! Bruce Whitmore
(847) 404-5092 (mobile)
bwhitm...@sbcglobal.net
___
Thanks everyone for supporting this list with your contributions. Each and
every
Bruce, my cylinders are A250 but there are different size A250s. Navtec lists
all and you can use the dimensions online to identify what you have. I
originally ordered the parts from Navtec or Southshore, can’t remember for
sure, too close to 60 and they sent parts for an 89 37+. The cost was
In my research on repairing Touche's adjuster, I saw a post attributing
failures of the top seal to UV exposure. My simple solution was a neoprene
washer from Home Depot.
https://www.homedepot.com/p/Everbilt-5-8-in-x-2-in-Black-Neoprene-Washer-815888/204276369
I bought a 1/2 inch and a 5/8 inch
From: Len Mitchell via CnC-List
To: CNC List
Cc: Len Mitchell
Sent: Friday, August 17, 2018 11:34 PM
Subject: Stus-List 37/40 hydraulics
After all the talk about hydraulics last week I noticed both my backstay
cylinders are leaking a little around the top seal. I have one cylinder
After all the talk about hydraulics last week I noticed both my backstay
cylinders are leaking a little around the top seal. I have one cylinder working
harder than the other too which is a problem. I put together the parts needed
to rebuild them and thought someone may benefit from knowing the
