I applied 3M Scotchcal striping tape for Touche's (1971 35-1) cove stripe
after repainting. Specifically 5/8 inch gold metallic, 3M 73403. It fits
the cove stripe depression very well. Here's a pic:
https://drive.google.com/file/d/0B_sb5TfIENvsckJWcWNldEFydjg/view?usp=sharing
Dennis C.
Touche'
I have a 73 30 foot if that helps
On Sat, Jun 6, 2020 at 8:19 PM Lewis Cooke via CnC-List <
cnc-list@cnc-list.com> wrote:
> I am working on an early C&C 30-1 does anyone have a pic of the origanal
> cove stripe. I see that Holland marine sells the stars and diamonds but
> they say the stripes
I am working on an early C&C 30-1 does anyone have a pic of the origanal
cove stripe. I see that Holland marine sells the stars and diamonds but
they say the stripes the have are an inch wide half inch with eighth inch
on either side can anyone confirm this, thank you
Lewis Cooke
C&C 30-1 #45
S/V F
via
CnC-List
Sent: Monday, April 9, 2018 8:36 AM
To: cnc-list
Cc: Ken Heaton
Subject: Re: Stus-List Cove stripe and symbol
Holland Marine stocks the stars and the stripe tape. I haven't bought any from
them so cannot comment on the quality.
A link to the page is here: http://www.holl
Holland Marine stocks the stars and the stripe tape. I haven't bought any
from them so cannot comment on the quality.
A link to the page is here: http://www.hollandmarine.com/CCfolder/CC001.html
...scroll down a bit
Ken H.
On 8 April 2018 at 17:46, DAVID R MOCNY via CnC-List
wrote:
> I did m
I did mine in 2012 and it still looks new. I still have the leftover and just
checked. I ordered 3/4 inch. It fit perfectly because it curves in to the
groove. I looked and the place is still in business. Vinalstriping.com. $34
for a 150 foot roll. For the stars, they sell 14 inch wide by
I removed the old tape with a 3M Stripe Off wheel and used 3M 5/8 gold
tape. I did not add the star. Looks good.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
On Sun, Apr 8, 2018 at 1:49 PM, David Knecht via CnC-List <
cnc-list@cnc-list.com> wrote:
> I am considering redoing the cove stripe on my
I have a C&C 99 and just measured mine. 1/2” will work best if I use 5/8” the
edges will protrude out of the mounded cove and it will be much more difficult
to line up. Since the edges may be out of cove the edges may wear out quickly.
Rod
Sent from my iPhone
> On Apr 8, 2018, at 3:49 PM, Da
I am considering redoing the cove stripe on my boat as it is pretty faded. I
found a few old emails about this topic and both used vinyl tape. One person
used 1/2” tape and one 5/8” and I can see the logic for both. Anyone done this
more recently or have comments on longevity? How did you h
ill haven’t done the cove stripe but I’m
>>> leaning toward ½” tape stripe.
>>>
>>> Rick Taillieu
>>> Nemesis
>>> '75 C&C 25 #371
>>> Shearwater Yacht Club
>>> Halifax, NS.
>>>
>>>
>>>
>>> From:
> Nemesis
>> '75 C&C 25 #371
>> Shearwater Yacht Club
>> Halifax, NS.
>>
>>
>>
>> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bob
>> Moriarty
>> Sent: May-01-13 9:27 PM
>> To: cnc-list@cnc-list.com
>> Sub
om: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bob
> Moriarty
> Sent: May-01-13 9:27 PM
> To: cnc-list@cnc-list.com
> Subject: Stus-List Cove Stripe Painting
>
> Speaking of boot stripes but a couple of feet higher, has anyone had
> difficulty repainting the
r Yacht Club
Halifax, NS.
*From:*CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of
*Bob Moriarty
*Sent:* May-01-13 9:27 PM
*To:* cnc-list@cnc-list.com
*Subject:* Stus-List Cove Stripe Painting
Speaking of boot stripes but a couple of feet higher, has anyone had
difficulty repain
After Touché was reprinted in 2010, I replaced the cove stripe with 3M
automotive tape.
Prior to painting, I removed the old stripe with a 3M Stripe Off wheel. It had
ragged edges but came off easily with the wheel.
Dennis C.
Touché 35-1 #83
Mandeville, LA
Sent from my iPhone
On May 1, 2013
'75 C&C 25 #371
Shearwater Yacht Club
Halifax, NS.
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bob
Moriarty
Sent: May-01-13 9:27 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Cove Stripe Painting
Speaking of boot stripes but a couple of feet hi
Speaking of boot stripes but a couple of feet higher, has anyone had
difficulty repainting their cove stripe, which on Ox is engraved and has
uneven edges?
The first attempt I assigned to my son, hoping he'd become more detail
oriented. For the second attempt I used a 1/4"(?) roll of painters tape
16 matches
Mail list logo