-list-boun...@cnc-list.com] *On Behalf Of
*Tom Alessi via CnC-List
*Sent:* Monday, November 21, 2016 4:57 PM
*To:* cnc-list@cnc-list.com
*Cc:* Tom Alessi
*Subject:* Stus-List Fw: Strut
Hey,
Recently wrapped a line around my prop/shaft and found some damage and
a loose prop strut when the boat
ct: Re: Stus-List Fw: Strut
We did this on Persistence. Other end of line was attached to a stanchion.
Strut was bent and minor damage to stern tube.
Suggest you remove fuel tank as suggested earlier and inspect stern tube
carefully as well as shaft for any bends. Have some one check the ali
of this repair
Mike
Persistence
Halifax, NS
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Tom Alessi
via CnC-List
Sent: Monday, November 21, 2016 4:57 PM
To: cnc-list@cnc-list.com
Cc: Tom Alessi
Subject: Stus-List Fw: Strut
Hey,
Recently wrapped a line around my prop/shaft and found
four years later.
Good luck,
Frank
C 38LF, S/N: 001
Rose City YC
Portland, Oregon
From: Tom Alessi via CnC-List
Sent: Monday, November 21, 2016 12:57 PM
To: cnc-list@cnc-list.com
Cc: Tom Alessi
Subject: Stus-List Fw: Strut
Hey,
Recently wrapped a line around my prop/shaft and found some
My strut was not in line with the shaft tube, and the shaft was radially
warped, so I had to drop it and realign it with a new shaft. I have photos.
Basically chipped the old bodge away with wood chisels. The strut was never
bedded in compound, it was clean gelcoat under the strut. We buttered the
I did the samething to Pegasus. Pulled the strut, cleaned the hull,
rebedded using 5200 I think, reinstalled using new hardware, doubled up
fender washers and double nutted the bolts. No leaks or loose bolts 4 years
later.
Doug Mountjoy
Pegasus
LF38 #4
On Monday, November 21, 2016, Tom Alessi via
I had a bent strut a few years ago. Removed it, had machine shop
straighten it and re-installed it. straightforward job on my 35-1. Did
require removing the fuel tank for access to the fastener nuts. Helps to
have a buddy but if it is similar to mine, I just clamped Vise-Grips on the
nuts and
Hey,
Recently wrapped a line around my prop/shaft and found some damage and a loose
prop strut when the boat was hauled.
Has anyone done this repair and have any advice.
Thx
Tom Alessi
C 36
Rockaway Beach, NY
___
This list is supported by the
