If the CAL legend on the digital display (small legend at the bottom of the
display) flashes for the first 30 seconds after any power up, use the
appropriate Calibration procedures to:
1. Apply the factory defaults.
2. Carry out the linearization procedure.
To do this:
1. Power up the wind
may I ask what you mean by linearize the instruments?
Wade
33 Mk II Oh Boy
On Sat, Jun 16, 2018 at 10:01 AM, ALAN BERGEN via CnC-List <
cnc-list@cnc-list.com> wrote:
> On the ST50/60/60+ instruments, there has to be 8 volts between the red
> wire and the screen. Less than 8 volts won't do.
On the ST50/60/60+ instruments, there has to be 8 volts between the red
wire and the screen. Less than 8 volts won't do. The i50/60 instruments
are probably the same. I had a similar problem with my wind display. I
thought it was the masthead transducer. When I discovered the lower (7.2
We had the opposite, speed didn't show, but direction did. Sending it to
Raymarine was a fixed rate repair. They replaced the speed portion of the
unit.
You can check the back of the unit to watch the voltage swings indicating
direction, but odds are it's the masthead sensor.
To verify, check
-list.com
Cc: Bradley Lumgair
Subject: Stus-List Raymarine wind
I’m having an intermittent issue with the wind instrument on Pulse. I believe
it’s the i50 i60 package. It always shows digital wind speed on the display,
but the directional indicator seems to freeze up. Sometimes it resets with
power
I’m having an intermittent issue with the wind instrument on Pulse. I believe
it’s the i50 i60 package. It always shows digital wind speed on the display,
but the directional indicator seems to freeze up. Sometimes it resets with
power off and back on, sometimes it takes 3 or 4 tries. Anyone
I’m changing mine out, ST-60’s, over the next week or so.
I can send them to you and you can pay me what you think they are worth.
James Bibb
SV Darwins Folly
Juneau, AK
> On Apr 25, 2018, at 2:16 PM, ALAN BERGEN via CnC-List
> wrote:
>
> Does anyone have a
esday, April 25, 2018 6:16:08 PM
To: C
Cc: ALAN BERGEN
Subject: Stus-List Raymarine Wind
Does anyone have a Raymarine S60 or ST60+ wind display and/or masthead
transducer they want to get rod of? Mine is acting erratic, and it's tough to
sail at night without it.
Alan Bergen
35 Mk III Thirsty
Thanks Chad. I'll try the display first, and then the transducer.
Alan
On Wed, Apr 25, 2018 at 4:04 PM, Chad Osmond via CnC-List <
cnc-list@cnc-list.com> wrote:
> Raymarine repair is about $150 fixed rate if it turns out to be the
> masthead transducer.
>
> We has ours repaired last year.
>
>
Raymarine repair is about $150 fixed rate if it turns out to be the
masthead transducer.
We has ours repaired last year.
You can verify by measuring the voltage from the ground shield to the
yellow and green wires, there are a few documents online.
On Wed, Apr 25, 2018, 6:17 PM ALAN BERGEN via
Alan,
I have an ST60 Wind display available. No transducer, it went over with
the mast. Male me an offer and it is yours.
Neil Schiller
269-521-6073
On 4/25/2018 6:16 PM, ALAN BERGEN via CnC-List wrote:
Does anyone have a Raymarine S60 or ST60+ wind display and/or masthead
transducer they
Does anyone have a Raymarine S60 or ST60+ wind display and/or masthead
transducer they want to get rod of? Mine is acting erratic, and it's tough
to sail at night without it.
Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR
___
Thanks everyone
The sticky but working MHU might be repairable.
There are kits available:
http://www.ebay.ca/itm/Raymarine-Autohelm-ST50-Wind-Vane-Bearings-O-Rings-/390530744370
That will do the ST50 units with black ends, some of the ST60 units.
The bearings are available separately, NMB
...@cnc-list.com] On Behalf Of davidrisch75
via CnC-List
Sent: Saturday, March 28, 2015 12:48 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Raymarine wind mast unit. ..
Need a mast wand for an ST 60. Anybody have one for sale?
David F. Risch.
1981 40
Please excuse brevity and possible typos
David,
I have one for a Raytheon ST60 which I'm replacing this year. The mast is
down and I can get it today if you want it. It has about 60-70 feet of
cable and I have a junction box you can have as well. I have no use for it
and you can have it for the price of postage if you want. I have the
Monty,
Wow. That is amazing. Thank you! I will take advantage of your kind offer.
Another Lister Pays It Forward.
Incredible group we have herewow.
David F. Risch
1981 40'
(401) 419-4650 (cell)
Date: Mon, 30 Mar 2015 10:24:19 -0400
Subject: Re: Stus-List Raymarine wind mast
.
Mike
Persistence
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com
mailto:cnc-list-boun...@cnc-list.com] On Behalf Of davidrisch75 via CnC-List
Sent: Saturday, March 28, 2015 12:48 PM
To: cnc-list@cnc-list.com mailto:cnc-list@cnc-list.com
Subject: Stus-List Raymarine wind mast unit. ..
Need
Monty
I have the ST60 as well and my unit always spins slower than the
other units in the marina and when things get real light it won't turn at all.
I tried lubing it with a dry lube product and that helped a little but not
much. Did you notice that issue with your setup when you
Dave
I just read that you will be taking the wind unit from Monty, good
luck I hope everything works out for you. If you have trouble and it does not
work out for you keep me in mind as I am also looking for one. The one I have
does not spin as freely as it should.
Gary Kolc
I don't have Raymarine, but my ComNav unit wasn't turning like it should
and I lubricated it with spray silicone. It seemed to fix the problem.
Gary
S/V Expresso
75 CC 35 Mk II
East Greenwich, RI, USA
~~~_/)~~
On Mon, Mar 30, 2015 at 6:15 PM, ahycrace--- via CnC-List
Need a mast wand for an ST 60. Anybody have one for sale?
David F. Risch.
1981 40
Please excuse brevity and possible typos...sent from my mobile device. ___
Email address:
CnC-List@cnc-list.com
To change your list preferences, including
21 matches
Mail list logo