&C 30-1
STL
--
From: Indigo via CnC-List mailto:cnc-list@cnc-list.com
To: cnc-list@cnc-list.com
Cc: Indigo mailto:ind...@thethomsons.us
Sent: Sunday, June 12, 2016 6:48 AM
Subject: Re: Stus-List Rolle
>> Chuck Gilchrest
>>
>> Half Magic
>>
>> 1983 LF 35
>>
>> Padanaram, MA
>>
>>
>>
>> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel
>> Aronson via CnC-List
>> Sent: Tuesday, June 21, 2016 2
21 12:19 (GMT-07:00) To:
cnc-list@cnc-list.com Cc: Chuck Gilchrest
Subject: Re: Stus-List Roller Furling Line
Joel,
You could use the mid point as an average, but I also leave 3 or 4 wraps of
rope around the drum when the jib is fully furled just to have a margin of
error when the jib is fu
Samsung device over Canada's largest network.
Original message
From: Stevan Plavsa via CnC-List
Date: 2016/06/21 14:11 (GMT-07:00) To:
cnc-list@cnc-list.com Cc: Stevan Plavsa
Subject: Re: Stus-List Roller Furling Line
I'm really low tech - hoist the sail at the doc
Jun 2016 14:59:16 -0400
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Roller Furling Line
From: cnc-list@cnc-list.com
CC: joel.aron...@gmail.com
Never heard of removing the core. Sounds stupid! I could see stripping cover.
If the line is as long as the boat, you are probably OK.
Joel
On Tue
I'm really low tech - hoist the sail at the dock, connect the furling line
.. roll the sail up by hand (by manually rotating the drum) .. go a few
extra turns - to someone else's point, undoing jib sheets later is easy if
need be.
You guys are overthinking it :)
(probably I'm underthinking it)
I
List Roller Furling Line
Never heard of removing the core. Sounds stupid! I could see stripping cover.
If the line is as long as the boat, you are probably OK.
Joel
___
This list is supported by the generous donations of our members. If you like
> Chuck Gilchrest
>
> Half Magic
>
> 1983 LF 35
>
> Padanaram, MA
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Joel
> Aronson via CnC-List
> *Sent:* Tuesday, June 21, 2016 2:06 PM
> *To:* cnc-list@cnc-list.com
> *Cc:*
1983 LF 35
Padanaram, MA
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson
via CnC-List
Sent: Tuesday, June 21, 2016 2:06 PM
To: cnc-list@cnc-list.com
Cc: Joel Aronson
Subject: Re: Stus-List Roller Furling Line
Chuck,
Why not measure from the mid-point
For Fred's sake you should have used the calculus!Nice calc using
averages.RonWild CheriC&C 30-1STL
From: Chuck Gilchrest via CnC-List
To: cnc-list@cnc-list.com
Cc: Chuck Gilchrest
Sent: Tuesday, June 21, 2016 1:02 PM
Subject: Re: Stus-List Roller Furling Line
Me
, 2016, at 1:25 PM, Ronald B. Frerker via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> Shouldn't it also change as the drum wrap gets thicker?
> Ron
> Wild Cheri
> C&C 30-1
> STL
>
>
>
> ----------
> *From:* Indigo via CnC-Li
wrote:
>
> Shouldn't it also change as the drum wrap gets thicker?
> Ron
> Wild Cheri
> C&C 30-1
> STL
>
>
>
> From: Indigo via CnC-List
> To: cnc-list@cnc-list.com
> Cc: Indigo
> Sent: Sunday, June 12, 2016 6:48 AM
> Subject: Re: Stus-List
Wild Cheri
> C&C 30-1
> STL
>
>
>
> From: Indigo via CnC-List <mailto:cnc-list@cnc-list.com>>
> To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
> Cc: Indigo mailto:ind...@thethomsons.us>>
> Sent: Sunday, June 12, 2016 6:48 AM
> Subject
30-1
STL
*From:* Indigo via CnC-List
*To:* cnc-list@cnc-list.com
*Cc:* Indigo
*Sent:* Sunday, June 12, 2016 6:48 AM
*Subject:* Re: Stus-List Roller Furling Line
I may be totally wrong, but I don't think there is a direct
correlati
Shouldn't it also change as the drum wrap gets thicker?RonWild CheriC&C 30-1STL
From: Indigo via CnC-List
To: cnc-list@cnc-list.com
Cc: Indigo
Sent: Sunday, June 12, 2016 6:48 AM
Subject: Re: Stus-List Roller Furling Line
I may be totally wrong, but I don't th
Just replaced the furler line on Pegathy. 145% Genoa on an LF38 80' of 3/8
double braid. Works well, 10' tail when unfurled, figure 8 to hold the line on
the drum. A bit more than a half foot of stretch under load when reefed, I
figure. That's less than a half turn of the drum. I figure that if
@cnc-list.com
Subject: Stus-List Roller Furling Line
From: cnc-list@cnc-list.com
CC: e...@schillay.com
Listers,
My roller furling line got ultra-tangled in the drum and I ended up having to
drop the headsail and cut it all out.
I bought some new line and am going to install tomorrow, weather
kley
Subject: Re: Stus-List Roller Furling Line
Jonathan,
You are correct there isn't a direct correlation between furling line length
and foot length. As I previously stated mine happens to be roughly 1:1
averaged over the entire furl. I am simply visually approximating the diameter
I do it the way Josh recommends. I also put the maximum amount of line on
the drum. It's easier to furl when the drum is full (the line is coming
off a larger diameter full drum) than when it's less than full. Also, keep
some tension on the furling line when letting out the jib, also
recommende
Jonathan,
You are correct there isn't a direct correlation between furling line
length and foot length. As I previously stated mine happens to be roughly
1:1 averaged over the entire furl. I am simply visually approximating the
diameter of a full drum compared to a full sail roll. You're right
I may be totally wrong, but I don't think there is a direct correlation between
the length of the foot and length of furling line. The marker the diameter of
the drum, the longer the circumference and thus the longer the line required
for one rotation - but the circumference of a roll of sail wi
Why not wind up as much line as is needed on the drum first? 4 or 5 or 10
wraps or whatever, plus the foot length (24'). Now raise the sail. When
you pull the furling line it will roll up the sail. Just like normal.
Seems easier than trying to control a sail while manually rolling it
without an
Those 2 rolls by hand will be on the "wrong" way as the only way to get them on
the drum is to rotate the sail and furler. I think the better way to get the
extra rolls on the drum would be to wait to attach the line to the drum until
the sail has been over furled by hand several times. I am th
If able, measure the old line you cut off to get a rough idea of how much
line to buy. Total up the pieces. Then raise the sail with no new line
around the drum. Roll up the sail by hand again with no line attached to
the drum. Now attach the new line to the drum with the sail fully furled.
Add 2 r
Josh,
Fntastic! Thanks. I bought 80-feet of line and will wrap 27-28 feet or so
around the drum. That should do it.
You da man.
All the best,
Edd
---
Edd M. Schillay
Starship Enterprise
NCC-1701-B
C&C 37+ | City Island, NY
www.StarshipSailing.com
---
Make sure the line leads out of the drum 90 degrees to the forestay. If yours
doesn't move the first block up or down until it does.
Second, it's a lot easier to wrap the sheets around the furled sail to get the
correct number of wraps.
Buy extra line.
Dennis C.
Sent from my iPhone
> On J
Mine is nearly a 1:1 ratio and I usually keep a minimum of 3 or 4 wraps on
the drum (~2ft). Then the add the length of the distance from the drum to
the desired termination (~35ft). Then add the length of the foot. A 150%
will be about 24 ft. So 65ft should be sufficient. Remember that you hav
or two just in case
Ron C.
Impromptu
C&C 38MKIIC...77
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Edd
Schillay via CnC-List
Sent: Saturday, June 11, 2016 8:30 PM
To: cnc-list@cnc-list.com
Cc: Edd Schillay
Subject: Stus-List Roller Furling
Listers,
My roller furling line got ultra-tangled in the drum and I ended up having to
drop the headsail and cut it all out.
I bought some new line and am going to install tomorrow, weather permitting.
So here's the question. How many feet of line should I have wrapped around the
drum before
29 matches
Mail list logo