.
Chuck Gilchrest
S/V Half Magic
1983 35 Landfall
Padanaram, MA
From: CnC-List On Behalf Of Gary Russell via
CnC-List
Sent: Friday, December 7, 2018 8:04 AM
To: C&C List
Cc: Gary Russell
Subject: Re: Stus-List Rudder bearing questions...
I can't speak for the C&C 44, b
(it normally spins very freely). It felt like
> the Edson pedestal brake was on, but it wasn’t. Any thoughts on what may
> have caused the resistance?
>
> From: Steve Martin via CnC-List
> Sent: Thursday, December 06, 2018 10:14 PM
> To: cnc-list@cnc-list.com
> Cc: Ste
>
> From: Steve Martin via CnC-List
> Sent: Thursday, December 06, 2018 10:14 PM
> To: cnc-list@cnc-list.com
> Cc: Steve Martin
> Subject: Stus-List Rudder bearing questions...
>
>
> C&C 44 with spade rudder and harken top bearing...
> How much play is too
pedestal brake was on, but it wasn’t. Any thoughts on what may have
caused the resistance?
From: Steve Martin via CnC-List
Sent: Thursday, December 06, 2018 10:14 PM
To: cnc-list@cnc-list.com
Cc: Steve Martin
Subject: Stus-List Rudder bearing questions...
C&C 44 with spade rudder and ha
I can't speak for the C&C 44, but the rudder bearings on my 37+ were
Delrin. I used a jig saw and split the bearings at approximately 90
degrees apart. A couple of taps and the bearings came right out.
Gary
S/V Kaylarah
'90 C&C 37+
East Greenwich, RI, USA
~~~_/)~~
On Thu, Dec 6, 2018
C&C 44 with spade rudder and harken top bearing...How much play is too much and
does anyone know sizes and how to remove upper and lower bearings... and any
other info on what I might be in for tackling this job...Thanks
Sent from Yahoo Mail on Android___
