To: cnc-list@cnc-list.com
Cc: Donald Sebastian
Subject: Re: Stus-List Through hole location for bilge
outputs
Gene,
I was actually going to do the same thing on my boat.
Just recently purchased a boat and had a bilge pump but was not automatic.
I actually hooked the current smaller pu
: Donald Sebastian
Subject: Re: Stus-List Through hole location for bilge outputs
Gene,
I was actually going to do the same thing on my boat.Just recently
purchased a boat and had a bilge pump but was not automatic.
I actually hooked the current smaller pump that fits into the small well
Gene,
I was actually going to do the same thing on my boat.Just recently
purchased a boat and had a bilge pump but was not automatic.
I actually hooked the current smaller pump that fits into the small well and
did install a float valve but had to attached it slightly higher that the pump
Hi Gene
On Beemer my electric bilge with float switch uses one inch hose that is routed
directly aft then up and exits just aft of the starboard bulkhead in cockpit
locker two inches below the rub rail.
Bob Caughran
Beemer, 29MKII, 309
Sent from my iPhone
> On May 12, 2016, at 12:14 PM,
(the pump
is same height) and alarmed.
David F. Risch
1981 40-2
(401) 419-4650 (cell)
Date: Thu, 12 May 2016 12:14:57 -0500
To: cnc-list@cnc-list.com
Subject: Stus-List Through hole location for bilge outputs
From: cnc-list@cnc-list.com
CC: efo...@gmail.com
Hi Folks,
I just purchased a C 29 Mar
Hi Folks,
I just purchased a C 29 Mark II, Hawk, and I'm looking for advise on
upgrading the bilge pump situation. There is no auto pump in the boat which
scares the hell out of me, so that's the first improvement in order. I'm
following Don Casey's advise on putting in a small automatic bilge