11:12 AM
To: cnc-list@cnc-list.com
Cc: Joe Della Barba <j...@dellabarba.com>
Subject: Re: Stus-List Time for new halyard... Recommendations?
Is rope suitable for furling sails that might not come down more than once a
year?
Coquina
Joe Della Barba
j...@dellabarba.com <mailto:j
half Of Joe Della
> Barba via CnC-List
> Sent: Tuesday, May 15, 2018 11:12 AM
> To: cnc-list@cnc-list.com
> Cc: Joe Della Barba <j...@dellabarba.com>
> Subject: Re: Stus-List Time for new halyard... Recommendations?
>
>
>
> Is rope suitable for furling
Or a boat that races with RF credit.
-Original Message-
From: Steve Thomas via CnC-List
Sent: Tuesday, May 15, 2018 1:14 PM
To: cnc-list@cnc-list.com
Cc: Steve Thomas
Subject: Re: Stus-List Time for new halyard... Recommendations?
I don't see the point in changing to all rope
Of Joe Della Barba via
CnC-List
Sent: Tuesday, May 15, 2018 11:12 AM
To: cnc-list@cnc-list.com
Cc: Joe Della Barba <j...@dellabarba.com>
Subject: Re: Stus-List Time for new halyard... Recommendations?
Is rope suitable for furling sails that might not come down more than once a
year?
ba via
CnC-List <cnc-list@cnc-list.com>
Sent: Tuesday, May 15, 2018 9:47:07 AM
To: cnc-list@cnc-list.com
Cc: Joe Della Barba
Subject: Re: Stus-List Time for new halyard... Recommendations?
My jib halyard is shot. I always assumed I needed another wire/rope because the
sheaves are m
11:12 AM
To: cnc-list@cnc-list.com
Cc: Joe Della Barba <j...@dellabarba.com>
Subject: Re: Stus-List Time for new halyard... Recommendations?
Is rope suitable for furling sails that might not come down more than once a
year?
Coquina
Joe Della Barba
j...@dellabarba.c
om
> *Cc:* Gary Nylander <gnylan...@atlanticbb.net>
> *Subject:* Re: Stus-List Time for new halyard... Recommendations?
>
>
>
> I switched from wire/rope to rope without a problem.
>
> Gary
>
> 30-1
>
>
>
> *From:* CnC-List <cnc-list-boun...@cnc-list.c
: Gary Nylander <gnylan...@atlanticbb.net>
Subject: Re: Stus-List Time for new halyard... Recommendations?
I switched from wire/rope to rope without a problem.
Gary
30-1
From: CnC-List <cnc-list-boun...@cnc-list.com
<mailto:cnc-list-boun...@cnc-list.com> > On Behalf O
@cnc-list.com <mailto:cnc-list@cnc-list.com>
Cc: Neil Andersen <neil.eric.ander...@gmail.com
<mailto:neil.eric.ander...@gmail.com> >
Subject: Re: Stus-List Time for new halyard... Recommendations?
Bruce,
First thing is to replace the wire/rope with all rope.
Neil
198
gt;
>
>
> Joe Della Barba
>
> j...@dellabarba.com
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Neil
> Andersen via CnC-List
> *Sent:* Tuesday, May 15, 2018 9:36 AM
> *To:* cnc-list@cnc-list.com; cnc-list@cnc-list.com
> *Cc:* Neil A
t [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Neil
> Andersen via CnC-List
> *Sent:* Tuesday, May 15, 2018 9:36 AM
> *To:* cnc-list@cnc-list.com; cnc-list@cnc-list.com
> *Cc:* Neil Andersen <neil.eric.ander...@gmail.com>
> *Subject:* Re: Stus-List Time for new halyard..
Andersen via CnC-List
Sent: Tuesday, May 15, 2018 9:36 AM
To: cnc-list@cnc-list.com; cnc-list@cnc-list.com
Cc: Neil Andersen <neil.eric.ander...@gmail.com>
Subject: Re: Stus-List Time for new halyard... Recommendations?
Bruce,
First thing is to replace the wire/rope with all rope.
com>
Sent: Tuesday, May 15, 2018 8:02:08 AM
To: cnc-list@cnc-list.com
Cc: John Conklin
Subject: Re: Stus-List Time for new halyard... Recommendations?
I have the wire to rope sheaves on my main and spin halyard 1982 C 37
Alsoa rookie here and no idea on size or material for my
Topping lift, Genoa
I have the wire to rope sheaves on my main and spin halyard 1982 C 37
Alsoa rookie here and no idea on size or material for my
Topping lift, Genoa sheets, spin halyard
Lack of use by previous owner have most of them firm swollen and stiff and
green !:( lol
Would like to change out genoa
Flyer1980 C 40
Original Message
Subject: Re: Stus-List Time for new halyard... Recommendations?
From: Chuck Gilchrest <csgilchr...@comcast.net>
Date: Mon, May 14, 2018 7:09 pm
To: cnc-list@cnc-list.com
Thanks for the plug, but I would suggest supporting a LOCAL business so you’l
l.com
-Original Message-
From: Bruce Whitmore via CnC-List <cnc-list@cnc-list.com>
To: C List <cnc-list@cnc-list.com>
Cc: Bruce Whitmore <bwhitm...@sbcglobal.net>
Sent: Mon, May 14, 2018 8:48 am
Subject: Stus-List Time for new halyard... Recommendations?
Hello all,
om him...
>
> Get Outlook for Android
>
> From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Josh Muckley via
> CnC-List <cnc-list@cnc-list.com>
> Sent: Monday, May 14, 2018 12:45:46 PM
> To: cnc-list@cnc-list.com
> Cc: Josh Muckley
> Subject: Re: Stus-
st@cnc-list.com>
Sent: Monday, May 14, 2018 12:45:46 PM
To: cnc-list@cnc-list.com
Cc: Josh Muckley
Subject: Re: Stus-List Time for new halyard... Recommendations?
Based on the link below I've enjoyed Yale Crystalline and Sampson Walpspeed for
halyards. When I replaced my reef lines and outhaul
Based on the link below I've enjoyed Yale Crystalline and Sampson Walpspeed
for halyards. When I replaced my reef lines and outhauls I used a similar
ideology but was selecting based on color scheme more specifically than
price or performance and used Endura, V-100, and VPC. I have found all 5
If your boat still has the right sheaves, then wire and rope combination
halyards are still a viable option. There is very little stretch and polyester
has the best hand in my opinion. No issues to speak of with eye splices either.
Also relatively low cost.
Steve Thomas
C
Merritt Island, FL
gt;
>> Thanks!
>>
>> Bruce Whitmore
>>
>> (847) 404-5092 (mobile)
>> bwhitm...@sbcglobal.net
>>
>>
>> From: Joel Aronson via CnC-List <cnc-list@cnc-list.com>
>> To: cnc-list <cnc-list@cnc-list.com>
>> Cc: Joel A
May 14, 2018 10:40:02 AM
> *To:* cnc-list@cnc-list.com
> *Cc:* Chuck Gilchrest
> *Subject:* Re: Stus-List Time for new halyard... Recommendations?
>
> Full disclosure, I work for a Canadian rope company called Novabraid.
> You’re on the right track with a “hybrid” or mid tech li
Chuck Gilchrest via
CnC-List <cnc-list@cnc-list.com>
Sent: Monday, May 14, 2018 10:40:02 AM
To: cnc-list@cnc-list.com
Cc: Chuck Gilchrest
Subject: Re: Stus-List Time for new halyard... Recommendations?
Full disclosure, I work for a Canadian rope company called Novabraid. You’re
on the
ron...@gmail.com>
> *Sent:* Monday, May 14, 2018 9:46 AM
> *Subject:* Re: Stus-List Time for new halyard... Recommendations?
>
> VPC is a compromise between stretch and price. It is stiff, but not as
> stiff as X. I used it on my 35, and we had to use the cunningham after the
> sa
sales…
Brian
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bruce
Whitmore via CnC-List
Sent: Monday, May 14, 2018 10:15 AM
To: cnc-list@cnc-list.com
Cc: Bruce Whitmore <bwhitm...@sbcglobal.net>
Subject: Re: Stus-List Time for new halyard... Recommendations?
Full disclosure, I work for a Canadian rope company called Novabraid. You’re
on the right track with a “hybrid” or mid tech line for low stretch at a
reasonable cost. New England’s VPC product is great for halyards as is Samson
MLX and Novabraid Argus. All will require a class 2 core to core
t <cnc-list@cnc-list.com>
Cc: Joel Aronson <joel.aron...@gmail.com>
Sent: Monday, May 14, 2018 9:46 AM
Subject: Re: Stus-List Time for new halyard... Recommendations?
VPC is a compromise between stretch and price. It is stiff, but not as stiff
as X. I used it on my 35,
VPC is a compromise between stretch and price. It is stiff, but not as
stiff as X. I used it on my 35, and we had to use the cunningham after the
sail loaded up. For my 44, I bought Endura on sale, went down a size (3/8)
and am very happy with it.
Joel
On Mon, May 14, 2018 at 9:34 AM, dwight
Samson braid. I like it
On Mon, May 14, 2018 at 9:48 AM Bruce Whitmore via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hello all,
>
> We have a 1994 C 37/40+. We've owned the boat for about a year. The
> halyards are badly faded from the sun, and we noticed an area where the
> core is showing
Hello all,
We have a 1994 C 37/40+. We've owned the boat for about a year. The
halyards are badly faded from the sun, and we noticed an area where the core is
showing at the eye splice around the shackles. The current halyards are
Sta-Set X.
We don't race, so super high-tech line is
30 matches
Mail list logo