Stus-List Forward hatch rubber seal

It appears that the seal on the forward hatch on our C 29 is leaking.  I was thinking of replacing it with a 3/8 by 3/4 foam rubber seal.  I cut out a piece of the original seal and it looks as if it was round.  Any suggestions? Frank___ This list is

Re: Stus-List C 33-2 - 1985 Cooler Drainage Issue

I did this years ago but added salt water as well. One foot pump can pump fresh or salt water or icebox. Just a few valves and hose. It is so easy to clean the icebox. David F. Risch (401) 419-4650 (cell) Date: Mon, 18 Apr 2016 13:32:05 -0400 To: cnc-list@cnc-list.com Subject: Re:

Re: Stus-List Galley sink basket/strainer

Take a look at Fisheries Supply for Scandvik sink drain adapters. They are available for both 3/4” and 1” hoses. http://www.fisheriessupply.com/scandvik-1-1-4in-sink-drain-adapter-hose-barb Also, you don’t

Re: Stus-List C -- Shift cable attachement at engine stringer

I can report that it is possible to remove the shift cable without lifting the engine. Barely possible!I managed to create a tool to blindly unscrew the hex bolts that hold the clamp. The cable is now out of the boat. Huge relief. On Fri, Apr 15, 2016 at 9:42 PM, bobmor99 . via CnC-List

Re: Stus-List C 33-2 - 1985 Cooler Drainage Issue

On my 35-1 the manual fresh water pump for the sink also takes suction, by means of a 3-way valve, from the icebox drain, so it can pump the water right into the sink. I don't know if that was original or installed by some PO, but it works pretty well. Neil Gallagher Weatherly 35-1 Glen

Re: Stus-List Forward hatch rubber seal

Atkins & Hoyle will sell you the world's most expensive seal, or you can get a large roll at McMaster Carr. http://www.mcmaster.com/#epdm-foam-cords/=116i66x or hope someone has some laying around. I'm ordering 1/2 inch if anyone needs some. BTW, I used Goo Gone to loosen the adhesive. Worked

Re: Stus-List C 33-2 - 1985 Cooler Drainage Issue

My 1980 Landfall 38 that I just bought recently had a small hand pump, but no drain. I was checking it out this weekend and will probably install one that drains into the sink drain so it doesn't go into the bilge. A "Y" connector should to the trick so it doesn't back up into the sink. I

Re: Stus-List Interior cushions

I'd hesitate to put 40 year old cushions in an industrial machine. They are probably poly, so they won't shrink, but they could disintegrate. Joel 35/3 Annapolis On Mon, Apr 18, 2016 at 1:14 PM, paul taylor via CnC-List < cnc-list@cnc-list.com> wrote: > I have a 1977 29-1, original cushions.

Re: Stus-List Interior cushions

Paul, I don't think I would run them thru a washer, I think if you want to try and save the fabric, it may be worth your while to open them up, get the foam out and have them dry cleaned. You may be able to salvage the foam but, I'd recommend at least try and replace the foam, maybe have new

Re: Stus-List Interior cushions

Paul - Every few years I take the covers off and wash them. Also spray the foam to reduce odor. Biggest issue is sometimes the zippers break during the pull-off process and I take the piece over to the local shop to repair. Someday I will replace the foam and covers, just not this day. Too

Re: Stus-List C 33-2 - 1985 Cooler Drainage Issue

The manual pump is original. Still available. Dave 33-2 windstar Date: Mon, 18 Apr 2016 11:22:22 -0300 From: To: Subject: Re: Stus-List C 33-2 - 1985 Cooler Drainage Issue Message-ID: Content-Type:

Re: Stus-List Ontario Forward hatch rubber seal

Hi Steve, I think that you are a Toronto boat! I need some as well, in two sizes, small head hatch and forward hatch. Fred was fabulous putting together a plexi template order for my small hatch. Ed put together a premium butyl order and we rendezvoused outside the Art Gallery of

Re: Stus-List Forward hatch rubber seal

Joel, I need some! Feel free to email me offline to arrange $$ and shipping. No way any of us needs 100 feet. Steve Suhana, C 32 Toronto On Mon, Apr 18, 2016 at 2:08 PM, Joel Aronson via CnC-List < cnc-list@cnc-list.com> wrote: > Atkins & Hoyle will sell you the world's most expensive seal, or

Stus-List Landfall 38 masthead sheaves

I just finished rewiring my mast over the weekend, upgrading with new LED nav lights from Marinebeam, along with new low-loss VHF and cell-repeater antenna cabling, and a Windex light and masthead wind transducer cable as well. While I was working at the masthead, I took a minute to inspect

Re: Stus-List Interior cushions

I took the covers off of all of my cushions on the 32 and washed those in the machine at home. I washed them with diluted bleach solution. They cleaned up very nicely. For the foam I actually went a bit crazy and soaked them one by one in a kiddy pool filled with bleach/water solution. Then I let

Stus-List FYI Chesapeake Area C - Sailing Movie Centreville MD Saturday

http://corsicariverfoundation.org/2016/02/28/corsica-river-presents-one-simple-question/ The Corsica River Foundation proudly welcomes Teresa and Ben Carey for a screening of their film, One Simple Question. Saturday, April 23rd….Come to enjoy good conversation and catered food and drink,

Stus-List Electric Drive

Bob,  With your larger prop,  does it spin and generate power while you are sailing?  My thoughts on batteries is that I plan on going lithium iron phosphate.  Much higher capacity than lead acid, super fast recharge,  1/10th the weight and 1/4th the size for the same reserve rating. Just much

Stus-List C 41 Transport

Hi, Am looking at acquiring a C 41 (keel is 7' 10") out of Massachusetts. Odd question... I've learned Massachusetts have quite restrictive rules on heights. Does anyone know of the height from the bottom of the keel to highest point (deck, stanchion, cabin top, etc), or maybe point me in

Re: Stus-List Ontario Forward hatch rubber seal

Don, I already made arrangements with Joel before seeing this email. Yes, I'm in Toronto! The AGO is an ideal place for me to meet otherwise, I work very close by. Steve Suhana, C 32 Toronto On Mon, Apr 18, 2016 at 2:52 PM, Don Harben via CnC-List < cnc-list@cnc-list.com> wrote: > Hi Steve, >

Stus-List Ontario Forward hatch rubber seal

Don: For what it's worth, I dealt with Hammerhead Nautical Systems for hatch sealsthe owner worked for Atkins & Hoyle..knows his stuff.I was ordering the wrong size and he corrected mebest priceand he sent me a tube of sealant, no cost. Nice guy, I'd like to be treated

Re: Stus-List C 41 Transport

Thanks. How long is your mast Where were you shipping it to, I need to get it to Ontario Canada. /J > On Apr 18, 2016, at 5:13 PM, Harry Hallgring Jr wrote: > > Brownell in Mattapoisett, MA will have all that info and more. I had to > remove my pulpits, stanchions,

Re: Stus-List Electric Drive

Hi James, Yes, the larger prop is better but still not great at regen. I don't have any data but I can hear the larger prop starting to regen at a lower speed through the water than the original, smaller prop. Regen is generally thought to be not that great on a boat my size (33 feet) unless it's

Re: Stus-List Landfall 38 masthead sheaves

Well, counting a friend of mine at the marina this weekend, that makes three votes for Zephyrwerks… I guess I’ll give them a shout. Thanks! — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C Landfall 38) -- on the hard in Bayfield, WI :^( > On Apr 18, 2016, at 7:39 PM, Chuck Gilchrest

Re: Stus-List C 41 Transport

Another recommend for Andrew's trucking if you end up going that way. They did an excellent job moving my boat and they know their C Steve Suhana, C 32 Toronto ___ This list is supported by the generous donations of our members. If you like what we do,

Stus-List C 29 mark II Rudder replacement/repair

Trying to get an idea of the cost for rudder replacement or repair. The boat I'm close to purchasing has some brown drainage from the rudder after drilling the bottom which tells me there is some corrosion in the steel webbing. I'm handy unsure if this is better left to a marina shop or not

Re: Stus-List Landfall 38 masthead sheaves

Fred, Contact Tom as Zephyrwerks in Port Townsend, WA and he’ll make any size sheave you want and will do it quickly and at a very reasonable price. Chuck Gilchrest S/V Half Magic 1983 LF 35 Padanaram, MA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Frederick G

Re: Stus-List Interior cushions

I tried cleaning mine, but they had taken on the smell of mold and wouldn't let go. Took one apart to experiment. Washed it several times, and used a whole bottle of febreeze on it. Still stunk like mold. So I got new cushions, and it looks like a new boat inside! Definitely worth the

Stus-List C 33-2 - 1985 Cooler Drainage Issue

I have a 1985 C 33-2. Every year when i take the boat out of the water, the cooler drains and is empty. This year it did not do that. Also last year the water in the head was not draining either. Now the question is where is the problem. Not sure about the plumbing of the cooler. Any guidance

Stus-List Small piece of teak and holly Plywood needed

Hi guys, I removed the salon table as I found it doesn't stow very well out of the way. My intention is to figure out a way to add some kind of hinged fitting to the mast and add a drop down leg for support. This would allow me to stow it with the leaves straddling the mast and leave the space

Re: Stus-List Galley sink basket/strainer

Check online for plumbing fittings for RV's (Recreational Vehicles). You should find something similar. Ken H. On 17 April 2016 at 22:07, Bradley Lumgair via CnC-List < cnc-list@cnc-list.com> wrote: > Last winter when we bought Pulse, the surveyor wrote that every hose on > the boat should be

Re: Stus-List Small piece of teak and holly Plywood needed

Harry, Thats Great! of course I can wait! Thanks so much! See you when you get back! Danny On 4/18/2016 9:54 AM, Harry Hallgring Jr via CnC-List wrote: Danny, I have that at home...but I'm in Florida for 10 days if you can wait. Harry Sent from my iPhone 7 beta On Apr 18, 2016, at

Re: Stus-List Small piece of teak and holly Plywood needed

Danny, I have that at home...but I'm in Florida for 10 days if you can wait. Harry Sent from my iPhone 7 beta > On Apr 18, 2016, at 09:32, Danny Haughey via CnC-List > wrote: > > Hi guys, > > I removed the salon table as I found it doesn't stow very well out of > the

Re: Stus-List C 33-2 - 1985 Cooler Drainage Issue

My C7C33ii has a small manually operated pump attached to the cooler drain and can be pumped into the galley sink. I have no idea if this is original or was installed by a PO. As for the head, do you mean the sink won’t drain or the head itself? Mike Amirault C Lovely Cruise SMSC

Re: Stus-List C 33-2 - 1985 Cooler Drainage Issue

I think the pump on the cooler drain was standard on that era of boats, our 84 29'er had it, so does our 84 35'er. Jim Watts Paradigm Shift C 35 Mk III Victoria, BC On 18 April 2016 at 07:22, mike amirault via CnC-List wrote: > My C7C33ii has a small manually operated

Re: Stus-List C 41 Transport

Thanks all. I plan on calling them tomorrow. /J > On Apr 18, 2016, at 9:22 PM, Stevan Plavsa wrote: > > Another recommend for Andrew's trucking if you end up going that way. They > did an excellent job moving my boat and they know their C > Steve > Suhana, C 32 >

Re: Stus-List 35-1 refrigeration installed completed

Curious of the details. Cost, A-Hr per day? Pictures are good too. Josh Muckley S/V Sea Hawk 1989 C 37+ Solomons, MD On Apr 18, 2016 11:20 PM, "Dennis C. via CnC-List" wrote: I finished installing refrigeration (Isotherm 3701) on Touche' today. Cold beer!!! Took a

Re: Stus-List Head Plumbing

Hi Randy, This is the way I plumb my head basin & toilet intake many years ago. The reasons are two-fold, I eliminated an unnecessary thru-hull penetration and if we're going to be away form the boat for a couple of weeks or more, I pump a 1/2 sink of fresh water through the toilet to

Stus-List Head Plumbing

Listers- If you'll humor me again, I'd like to get your comments on how the head on my boat (30-1 #7) is currently plumbed. The intake hose is teed into the vanity sink drain to its through hull. The discharge hose goes to a holding tank only (no Y-valve for overboard discharge). It's the

Re: Stus-List Head Plumbing

Not an uncommon configuration. I've seen it before. Dennis C. On Mon, Apr 18, 2016 at 10:04 PM, Randy Stafford via CnC-List < cnc-list@cnc-list.com> wrote: > Listers- > > If you'll humor me again, I'd like to get your comments on how the head on > my boat (30-1 #7) is currently plumbed. > >

Re: Stus-List C 29 mark II Rudder replacement/repair

My rebuild was ~$5k. Seeing what the professionals do was definitely an education. Not hard, just a lot of work. https://drive.google.com/folderview?id=0B8pEh5lnvP1yVUdWUDNxVGFUcDA Josh Muckley S/V Sea Hawk 1989 C 37+ Solomons, MD On Apr 18, 2016 10:11 PM, "Eugene Fodor via CnC-List"

Re: Stus-List Head Plumbing

Hi Rick, If it's not necessary to close the sink drain seacock when under way, then I guess I don't have to. I just assumed it was a good idea in case at high heel/roll angles or when pitching raw water would back into the sink (I saw that happen on a Merit 25 once). I'll check whether my

Stus-List 35-1 refrigeration installed completed

I finished installing refrigeration (Isotherm 3701) on Touche' today. Cold beer!!! Took a bunch of pictures. I can send link to any interested listers. Dennis C. Touche' 35-1 #83 Mandeville, LA ___ This list is supported by the generous donations of

Re: Stus-List Head Plumbing

Your head inlet teed to the sink drain is exactly the way my 38 is plumbed. I think that arrangement was pretty common in the 70s. My question is why you would close the sink drain seacock when under weigh. I have a shut off valve in the inlet line between the seacock and the head that

Re: Stus-List Head Plumbing

Count me in the camp that closes all the through hulls. A discussion recently about disintegrating valve and hoses and the bilge pump keeping up keeps me ever vigilant to the possibility of sinking. It's usually just a sink drain and the engine cooling. I keep the engine key hanging on the

Re: Stus-List Landfall 38 masthead sheaves (now: question about VHF coax)

I’m of no help with the sheave sizing but I do have a question: What VHF coax cable did you use? I will be replacing mine sometime this summer and would like to do the same. Best, Dave Godwin 1982 C 37 - Ronin Reedville - Chesapeake Bay Ronin’s Overdue Refit

Re: Stus-List C 41 Transport

Ship Her from RI. Andrew Burton 61 W Narragansett Newport, RI USA02840 http://sites.google.com/site/andrewburtonyachtservices/ +401 965-5260 > On Apr 18, 2016, at 18:30, Josh Muckley via CnC-List > wrote: > > Sometimes they'll remove the keel. It may just be

Re: Stus-List C 33-2 - 1985 Cooler Drainage Issue

“If it pumps up to the sink, how is it physically attached to the sink?.”Mine just has a 2-3 ft length of hose that I can direct into the sink.Mike AmiraultC Lovely CruiseSMSC N.S.___ This list is supported by the generous donations of our members. If

Re: Stus-List C 41 Transport

J, No chance of sailing it home? David F. Risch (401) 419-4650 (cell) Date: Mon, 18 Apr 2016 17:04:15 -0400 To: cnc-list@cnc-list.com Subject: Stus-List C 41 Transport From: cnc-list@cnc-list.com CC: phygi...@gmail.com Hi, Am looking at acquiring a C 41 (keel is 7' 10") out of Massachusetts.

Re: Stus-List C 41 Transport

Brownell in Mattapoisett, MA will have all that info and more. I had to remove my pulpits, stanchions, and pushpit to go over the road. State Police escort was half the cost just to traverse one bridge. Harry Sent from my iPhone 7 beta > On Apr 18, 2016, at 17:04, Phygital via CnC-List

Re: Stus-List mast wire spec?

Hi Fred, I have a similar project in mind for mid summer. I am curious about the wire spec that ended up using for lights, cell and VHF cable? I am also curious which cell aerial you went with. Don > On Apr 18, 2016, at 4:27 PM, Frederick G Street via CnC-List >

Re: Stus-List C 41 Transport

Sometimes they'll remove the keel. It may just be cheaper hire a delivery captain to deliver it by water. Josh Muckley S/V Sea Hawk 1989 C 37+ Solomons, MD On Apr 18, 2016 5:05 PM, "Phygital via CnC-List" wrote: > Hi, > > Am looking at acquiring a C 41 (keel is 7' 10")

Re: Stus-List C 33-2 - 1985 Cooler Drainage Issue

Yup, My 1985 33II has the small hand pump accessed from under the galley sink. Tom Lynch Escape (to be renamed Indo-Irish) C 33 MK II Bayfield, WI On Mon, Apr 18, 2016 at 10:33 AM, Jim Watts via CnC-List < cnc-list@cnc-list.com> wrote: > I think the pump on the cooler drain was standard on