You may also call depco pump. http://www.depcopump.com/
I've always found them to be very responsive.
Dennis C.
On Mon, Aug 6, 2018 at 2:33 PM, John Conklin via CnC-List <
cnc-list@cnc-list.com> wrote:
> Perfect ! I will give them a call no need to go submersible or is that
> recommended for
Look like one of these?
http://www.marchpump.com/pumps/series-3/lc-3cp-md/
Also search Dometic:
https://www.dometic.com/en/se/products/climate/air-conditioners/accessories/dometic-pml500-_-20853
https://www.amazon.com/MARCH-LC-3CP-MD-PML500-March-Pump/dp/B007FFBZH0
Dennis C.
On Mon, Aug 6,
A friend of mine is selling his very nice 1986 C 27V with Yanmar Diesel.
Contact Aytug, ay...@neodwell.com. $7,500. Jerry
1986 C 27 Mark V, one of C’s finest designs and noted for it’s fast and
fine sailing characteristics. J is in excellent condition and is fully
equipped.
Hull: Fin
I just replaced a refrigeration pump that looked just like that Lc-3CP, but
it was a Dometic. I think they are all the same.
I think I replaced it needlessly, as a couple days after I did, the new one
was screaming and shutting the compressor down. Again. Then, I remembered
that I had to bleed
Perfect ! I will give them a call no need to go submersible or is that
recommended for marine use even though pump is high and dry ?
Thanks again !
From: Dreuge
Sent: Monday, August 6, 2018 3:00:54 PM
To: cnc-list@cnc-list.com
Cc: jconk...@hotmail.com
Subject:
Jerome,
Kevin does not have HAM or SSB. He uses limited wifi for text and email
when in port.
He texted me pics from Hemmingway Marina last night.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
On Mon, Aug 6, 2018 at 1:25 PM, Jerome Tauber via CnC-List <
cnc-list@cnc-list.com> wrote:
> Sounds
Changing the password... funny or mean-spirited?
Let's have a poll to record your preference.
Cheers, Russ
ex- Sweet, 35 mk-1
At 09:24 PM 8/5/2018, you wrote:
Excellent, I will hook you up with my spam provider.
Jim Watts
Paradigm Shift
C 35 Mk III
Victoria, BC
On 5 August
Mine looks exactly like the March 893- 04 but that is the submersible model?
is says must be submerged ? ? the 893-03 would work but its not black casing
like the one 1 have. it sits under sink high and dry and looks like it drains
to sink drain ? Don’t know much about the refridgeration
I replaced all three breakers for interior lighting last year due to failure.
(One failed, but I replaced all three while I was at it.) Before the breaker
failed, lights that were on that circuit would dim, then brighten, then dim,
etc. This lasted a few weeks, then the lights stopped
I haven't used these but, I've seen them during some searches
https://shop.sailboatowners.com/cat.php?53966
On 8/6/2018 8:14 AM, Brien Sadler via CnC-List wrote:
In an attempt to not recreate the wheel, I'm looking for information,
pictures, or a source lead on a bimini frame for an '87 35-3.
Some submersible pumps need to be under water to cool them properly. You need
to get a fact sheet on the pump.
Bill Coleman
C 39 Erie, PAanimated_favicon1
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of John Conklin
via CnC-List
Sent: Monday, August 06, 2018 10:07 PM
I broke the threaded boss in the shore power inlet the other day on Pulse,
ordered a new one from amazon, and an ez lock collar for the cord. Looks like
it's all going to fit, more or less, however when I took the inlet apart, 2 of
the rear enclosure mounting corners are broken off (plastic)
Defective breakers are not really a common repair. Obviously they can
malfunction like everything else, but suddenly tripping at a new
lower-than-rated current would be VERY odd. The first thing I would be checking
is that the circuit was not in fact overloading the breaker.
**If the boat has
I used Genco in Toronto to make my bimini. They probably have made 35-3 biminis
before and have the pattern. If you don’t care about matching up to a dodger
for a full cover, all kinds of generic biminis on FleaBay and Amazon you could
adapt.
Joe
Coquina
C 35 MK I
From: CnC-List
I solved the breaker mystery. At least it appears so.
I recently installed a new Raymarine EV1/ACU100 auto pilot, but kept my
existing ST6000 pilot control and used my e7 MFD to set everything up. Running
the new Seatalkng backbone to the mfd was the toughest part. The EV series are
smart
Listers,
After some work, I was able to get the wiring reconnected to the refrigerator
on the Enterprise. The thermostat now lights up and I see different LEDs go on
and off, though nobody, including the manufacturer, knows what the lights mean
anymore.
So here are some questions, cause I’m
In an attempt to not recreate the wheel, I'm looking for information,
pictures, or a source lead on a bimini frame for an '87 35-3. Any help
would be greatly appreciated.
Brien Sadler
S/V TAZ
1987 C 35-3
___
Thanks everyone for supporting this list
Hi Edd,
You should hear the compressor shortly after you power up. It's not
hard to hear. If your unit is Frigiboat, I have a tag on my unit that
tells me what the LEDs mean. Let me know and I will get you the info if it
is Frigiboat. I would spend a little time diagnosing. It may just
No one seems to mention that on some C's the stanchions protrude
enough so that they will catch as you come in or out of a slip that has
pilings or boards on the finger pier. Unless someone is on the boat to
assist in keeping that from happening, one is likely to destroy a
stanchion. I have a
mine is down too! water cooled and small pump was screamin
was a MARCH MANUFACTURING
model 893-001-04 12v,1amp about 6”tall
Are these guys still around ? or what can I use to replace ?
Need Cold Beer yes! :)
thanks all
John Conklin
S/V Halcyon
You can't put a price on cold beer in the summer.
Edd, yes it should make a little noise. Is it air cooled or water cooled? What
make?
Bill Coleman
C 39
On Monday, August 6, 2018 Matthew L. Wolford via CnC-List
wrote:
I have an old Adler Barbour Cold Machine. It stopped working, and I
I have an old Adler Barbour Cold Machine. It stopped working, and I debated
replacement. Instead, I called a technician who has developed a niche business
fixing this type of thing. He discovered that one of the wires leading to the
circuit board (looks like a computer motherboard) which
Sounds like a great cruise. I went to Cozumel by cruise ship from Ft
Lauderdale a few years ago. Would love to visit Cuba by boat. Do you have a
ham radio on board. I could contact you on 20 meters from Montauk, NY. Jerry
Sent from my iPhone
> On Aug 5, 2018, at 7:54 PM, Kevin Benoit via
John,
Flagship Marine is a reasonable source for March Pumps. I did not see a
direct replacement for model 893-001-04, but a quick google search suggest that
the replacement model is 893-04. See the link below.
https://www.flagshipmarine.com/marinepumps.html
24 matches
Mail list logo
