Robert,
This is how I would do it, others may have their own ideas.
1 – Loosen off the babystay
2 – Measure from the attachment point on the mounting plate on the top of the
cabin liner to a fixed point of the cabin structure below. Try to pick a
point/points that will not flex or
Josh
What is the cockpit layout of the 37+ in terms of winch placement,
traveler, main controls, etc?
I am curious because having just gone from a Tiller boat with mid
cockpit traveler (toward aft of cockpit) and traveler and backstay and
sheet all at traveler with jib sheets/primaries at
Pictures?
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of coltrek via
CnC-List
Sent: Monday, August 25, 2014 9:45 PM
To: Jean-Francois J Rivard; cnc-list@cnc-list.com
Subject: Re: Stus-List Ever broke the key in the ignition switch?
I was able to get my broken key out
115 is sticky in light air. Better than a lot of boats but many in similar
handicap range are light air specialists. The 115 really likes 18 apparent up
wind and minimum 11 crew. 15-20 with 14 aboard the boat is a killer upwind
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On
Mike
Don't you run foul of PHRF rules with so many crew? Our region has max crew
weight limitations.
--
Jonathan
Indigo CC 35III
SOUTHPORT CT
On Aug 26, 2014, at 8:30, Hoyt, Mike via CnC-List cnc-list@cnc-list.com
wrote:
115 is sticky in light air. Better than a lot of boats but many
After finding out (the same way you folks have) that the key is easy to break
and it is also easy to bust the switch. I then replaced it for about $50
and then I found out that my old key fit my new switch and, looking at some
other Yanmar switches and finding out they are all the
Mike
My 35 MKII has the a very similar setup to what you describe for your new
Frers 33.I have been single handed sailing from the beginning, no problem on
Alianna and in fact I like that bridgedeck / traveller layout. I have a 7:1
advantage to ratchet block and cam cleat on my main sheet and
J30 owners have known this for years. Many don't have a key, just a
screwdriver.
Dennis C.
On Tue, Aug 26, 2014 at 8:35 AM, Gary Nylander via CnC-List
cnc-list@cnc-list.com wrote:
After finding out (the same way you folks have) that the key is easy to
break and it is also easy to bust the
All,
I got rid of my key-ignition a few years ago. The engine wont start
without the battery switch on and a thief would need to break into the boat to
enable the battery. Do you really think that once someone is able to get into
your boat and start turning things on that the absence
My boat has never had a key and I have never wanted one. A collection of about
15 keys will start about every boat and airplane ever made anyway.
Joe Della Barba
Coquina
CC 35 MK I
___
This List is provided by the CC Photo Album
Email address:
I like the ring / shortened key idea. The pull switch is also a good idea, I did try the superglue trick and it did not work for me.
Truth is: I knew the key is in a vulnerable spot and I usually take it out while sailing as I often came close to kicking it myself, especially when the boat is
I still cannot fathom why anyone would intentionally have a traveler forward
The traveler on windburn ( CC 30-1 ) was moved forward to the cockpit seat aft
of the
companionway. I think a common factory install was just forward of the binnacle
if so
equipped. The factory position works
I know it is time to reef when the key falls out of the switch!
Actually, I usually hang it on the shift lever when sailing. I carry a
spare in addition to screwdrivers in case someone steps on it when I forget
to hang it.
Joel
On Tue, Aug 26, 2014 at 11:17 AM, Jean-Francois J Rivard via
Ditto! Had one badly bent key a while ago. Too close to comfort. Learned to
pull the key out when sailing. Used to put the key in my pocket until I
realized that was a dumb idea should I be the one falling overboard! It now
hangs on the gear shift lever!
--
Jonathan
Indigo CC 35III
SOUTHPORT
Yanmar keys are just like Club Car golf carts keys. They are all the same.
My dock neighbor has used my spare key off and on for years.
Jack Fitzgerald
CC 39 TM
HONEY
US 12788
Savannah
On Tue, Aug 26, 2014 at 9:35 AM, Gary Nylander via CnC-List
cnc-list@cnc-list.com wrote:
After finding
My Yanmar key is on the same ring as the padlock key. Guess which my wife
started the engine with the other day.
Andy
CC 40
Peregrine
On Tue, Aug 26, 2014 at 11:42 AM, Jack Fitzgerald via CnC-List
cnc-list@cnc-list.com wrote:
Yanmar keys are just like Club Car golf carts keys. They are all
In the old days, Ferrari ignition keys were little more than a little
metal rod. You could just as easily start a Ferrari using a large nail
or a small phillips head screwdriver. When criticized for the lack of
security, Enzo replied that anyone who could afford a Ferrari, could
afford to
I have replaced the old, crumbling sound insulation in the accessible parts of
my engine compartment with new sound insulation from West Marine. However,
there is almost no room on either side of my Yanmar in my 30 MKII. Getting new
insulation in along the sides is going to be very difficult. I
These features on my Landfall 35 make it an easy (cruising) boat to sail
shorthanded:
1. Roller furling genoa with furling line to
cockpit .
2. Self tailing winches for genoa sheets in
cockpit.
3. Main halyard runs to cockpit.
4. Lazy jack system for main.
5. Traveller- main sheet
I don't have sound installation in Touche'. I have a diesel.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
On Tue, Aug 26, 2014 at 11:28 AM, Robert Hrabinsky via CnC-List
cnc-list@cnc-list.com wrote:
I have replaced the old, crumbling sound insulation in the accessible
parts of my engine
I used the West Marine sound insulation kit that included the foil covered foam
with a high density base. The sound attenuation was noticeable but nobody has
ever asked if the engine was on or off.
I think of sound as light. If the boat interior was dark and you turned on a
bright light
I wish it was the case with my boat. I lost my (only) key a while back (the
keychain ring split; the key landed on my hat, which attenuated the sound; I
put the hat on and the key flew into the water). I could not start the boat
with any other key around (I borrowed a few). $35 and the new
Marek; I am sure you can make that switch work like you want it to and I
know that if you search around a bit you will get it done.what is the real
value of a spare key at home
Dwight Veinot
CC 35MKII, Alianna
Head of St. Margaret's Bay, NS
_
From: CnC-List
What? Wha'd you say. I can't hear you.
Oh.
Sound insulation.
Never mind...
Dave
1982 CC 37 - Ronin
Sent from my iPad
On Aug 26, 2014, at 13:09, Dennis C. via CnC-List cnc-list@cnc-list.com
wrote:
I don't have sound installation in Touche'. I have a diesel.
Dennis C.
Touche' 35-1
Interesting conversation. Don't you guys own SAIL boats? Mine is pretty
quiet. (at least when I'm singlehanding)
Andy
CC 40
Peregrine
On Tue, Aug 26, 2014 at 6:00 PM, Dave Godwin via CnC-List
cnc-list@cnc-list.com wrote:
What? Wha'd you say. I can't hear you.
Oh.
Sound insulation.
Nope.
On Aug 26, 2014 12:32 PM, Robert Hrabinsky via CnC-List
cnc-list@cnc-list.com wrote:
I have replaced the old, crumbling sound insulation in the accessible
parts of my engine compartment with new sound insulation from West Marine.
However, there is almost no room on either side of my
Looks like this might work.
http://www.mouser.com/ProductDetail/Honeywell/32NT91-50/?qs=10P5Hhl%252bD79%252bkSSjwubyHg%3d%3d
Josh Muckley
S/V Sea Hawk
1989 CC 37+
Solomons, MD
On Tue, Aug 26, 2014 at 12:42 PM, Marek Dziedzic via CnC-List
cnc-list@cnc-list.com wrote:
I wish it was the case
Mike,
I would buy into Josh's rule of thumb for a light air boat: that it should go
upwind at about half of the apparent wind speed. But to me, light air is less
than 6 knots or so true. So we're talking about getting boat speeds of 3 or 4
knots upwind in apparent winds of up to 8 or 9. Or
28 matches
Mail list logo
