Re: Stus-List Traveler components

Try doing a google search on "Fico" traveller. You may be able to find a picture of what you have. I can't picture what you have from your description, but a lot of C&Cs were equipped with Fico travellers, including mine. Steve Thomas C&C27 MKIII - Original Message - From: Burt Str

Re: Stus-List Traveler components

Burt, You should have several options. You might consider talking to Guido or Mark at Garhauer Marine. They may be able to make you a new and better car for a reasonable price. I'm assuming there are sheaves on the ends of the car? How much room is between the sheaves? Enough to install a pad

Re: Stus-List Odile

Sounds like a wise decision! Rich > On Sep 14, 2014, at 21:20, Wally Bryant via CnC-List > wrote: > > Am I glad I decided not to do the Sea of Cortez this summer! > > <http://www.weather.com/news/update/hurricane-odile-mexico-baja-california-impac

Stus-List Traveler components

Took my salvage project to Newport this weekend. Beautiful sail down on Saturday. Front rolled through Saturday night and tested my anchor and ground tackle at the anchorage near Ida Lewis Yacht club. All worked fine, thank you. Cozy first ever evening on the boat with the admiral. Very enjoyable c

Re: Stus-List Odile

Am I glad I decided not to do the Sea of Cortez this summer! <http://www.weather.com/news/update/hurricane-odile-mexico-baja-california-impacts-20140914> Wal ___ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-l

Re: Stus-List In-Hull Depth Transducer

Thank you Graham. That's a big help. Dave Saltaire C&C 35 MK 3 -Original Message- From: Graham Collins [mailto:cnclistforw...@hotmail.com] Sent: Sunday, September 14, 2014 12:00 PM To: David Jacobs; cnc-list@cnc-list.com Subject: Re: Stus-List In-Hull Depth Transducer Hi Dave There are

Stus-List thru hull depth transducer

Message: 2 Date: Sun, 14 Sep 2014 10:08:46 -0400 From: "David Jacobs" To: Subject: Stus-List In-Hull Depth Transducer Message-ID:<01cfd025$6b3d71b0$41b85510$@comcast.net> Content-Type: text/plain; charset="us-ascii" I am purchasing a Lowrance chart plotter and depth sounder and like sev

Re: Stus-List setting a staysail & blooper

Dan, Conventional wisdom on staysails: You will achieve 0.5 knot increase in speed when you hoist the staysail. Likewise you will achieve a 0.5 INCREASE in speed when you drop it. Hence the name staysail. It should stay in the bag. Dennis C, Sent from my iPhone > On Sep 14, 2014, at 5:26

Stus-List Atomic 4 troubleshooting

Ok so, I've just run the engine fir nearly 2 hours to see if I could get it to cut out.  It ran perfectly and now I have fully charged batteries!  Lol. The coil is hot but not too hot to touch.  I can touch it for a few seconds but then it stays to hurt a bit.  My guess is about 180 degrees base

Re: Stus-List setting a staysail & blooper

Hi Dan, Too bad Hydrographic Canada doesn't have a preview on it's website. Chart 3312 immortalizes the blooper in all it's glory on the cover of the chartbook. small image here: http://www.captainsnautical.com/10938/230694/Canadian-Hydrographic-Paper-Charts/3312-Jervis-Inlet-and-Desolation-S

Re: Stus-List In-Hull Depth Transducer

I bought a Lowrance Elite 5 HDI last year, came with a transom mount transducer. I tried using it in-hull and was unable to get a signal anywhere, and my boat has a solid hull - I ended up returning the unit. Not sure which model you are getting, but Lowrance themselves state that it wouldn't

Re: Stus-List setting a staysail & blooper

Quick and dirty... "Staysail" is probably a "tallboy". Appropriately tall and skinny set under chute. Need mid deck attachment point. We (in the 70's) could never quite see the point. Raised and lowered it and compared speeds for a given point of sail. For yucks I would set it. Easy up.

Re: Stus-List In-Hull Depth Transducer

Hi Dave There are several areas of hull on the 35-3 that have no core, my speed/depth transducer is located adjacent to the thru-hull fitting for the head discharge and it is solid core there. Looking at the inside of the hull it should be clear where there is core and is no core, as there is a

Stus-List In-Hull Depth Transducer

I am purchasing a Lowrance chart plotter and depth sounder and like several others would really like to avoid another hole in the bottom. In-hull transducers will not work through a cored hull which my 35Mk3 has. Is there solid hull at or near the boats centerline? Is anyone using an in-hull transd

Stus-List setting a staysail & blooper

All, My C&C 33 (1976) came with a staysail & a blooper which I have yet to pull out of the bag. I will be racing next weekend and think I might try to pull a surprise "out of the bag". Anyone have some knowledge on how to set these beauties?   Thanks,   Dan Watts "Counterpoint" _