In 2011 I had a toggle break on the starboard jump stay on my 1976 C&C 38.
It caused me to question the integrity of the rod rigging.
It was, after all, 36 years old at the time and there was no previous
indication of any trouble brewing. But my future plans include offshore
cruising and at lea
For around 50-75K you can get a late 80s C&C 41 with PHRF around 70. I assume
the Redline 41 will come in somewhere around PHRF 25.
Jerry. C&C. 27 V J&J.
Sent from my iPhone
> On Oct 12, 2014, at 10:15 AM, Bruno Lachance via CnC-List
> wrote:
>
> i did not see the new Redline 41, But i h
There's another online nav game with which some may be familiar:
Virtual-loup-de-mer.org
French website but most interface is available in English.
It's not as graphically fancy as Volvo but seems to be more for 'serious'
nav players.
I have been on and off it over last 10 years and some of the s
David,
I purchases a 1984 C&C 35 MK3 last fall and had the rod all replaced. The cost
was $8K. However, the boat had been stored in doors every winter since it was
built and except for the rudder was totally dry. It was on the market for $38K
and I eventually purchased it for $24. Add the r
Dave -
In addition to the comments on rod rigging, and as a point of reference for
you on costs, I had an old Stearns headstay/furler and replaced it this fall
with a Harken. This required that I add a new forestay. For multiple
reasons I went with rod vs wire. Total cost for just the forestay
Listers,
So very close to a decision — stay tuned for dates, location and
details. I’m going to be concentrating on this a great deal now that the
Enterprise is being hauled for the winter today.
If you haven’t already done so, please provide your feedback at our
online survey
i did not see the new Redline 41, But i hope that it is more than "slithtly"
higher quality than a Bene or a Hanse. i charter a brand new (1month) Hanse in
the BVI last year. nice boat, but the quality of the inside is fairly cheap and
the deck hardware is minimal... this is just not the same bu
Rod can be reheaded for about $2000. Should be done every ten years per
Navtec.
Joel
On Sunday, October 12, 2014, David Dawes via CnC-List
wrote:
> Hi, can someone tell me how to reply to a thread? Sorry, I can’t figure
> it out. So I started a new one.
>
>
> Next I looked at a 1984 CNC 35 M3
David,
The primary reason rod rigging was developed was to reduce weight,
particularly weight aloft. Rod rigging is also supposed to reduce windage
(not likely that one would notice) and is stronger pound for pound. The
heads and spreader intersections are the weak links on rod rigs.
Identifyin
Not a pro but agree with Andrew. New style tangs and all the rod re-headed when
we rebuilt our rig 10 years ago. Pretty comfortable with the safety/reliability
aspects of older rod.
Dave
1982 C&C 37 - Ronin
Sent from my iPad
> On Oct 12, 2014, at 08:50, Andrew Burton via CnC-List
> wrote:
>
Talk to the guys at Navtec about reheading. That's on my list for this winter.
Andy
C&C 40
Peregrine
Andrew Burton
61 W Narragansett
Newport, RI
USA02840
http://sites.google.com/site/andrewburtonyachtservices/
+401 965-5260
> On Oct 12, 2014, at 08:19, David Dawes via CnC-List
> wrote:
hi David, welcome to the list. most correspondence happens on the email serve.
So, you got that much right! As far as I know, and i don't have rod rigging
and have only seen it, I think the main are of concern are the fittings to the
rods. I believe worst case scenario is the have the fitting
Hi, can someone tell me how to reply to a thread? Sorry, I can’t figure it
out. So I started a new one.
Next I looked at a 1984 CNC 35 M3 yesterday. Concerned about the rod rigging.
This boat is run down so I don’t expect a record of rigging inspection or
service.
A rigger friend recommen
13 matches
Mail list logo