Stus-List 10. Re: Acoustic insulation in Canada (Dreuge)

Was at the Toronto boat show last night and indeed hmp had insulation on sale, C$75 for 13 sq ft. Thanks for the tip. It may not have quite the mass of the other material i was looking at. (Not good) It is thicker (may be good or bad) and has a layer of foil n the outside. (Probably

Stus-List 33ii, 35iii others? In-mast wiring question, vhf RG-213

Along with icom 506 AIS purchase, I will replace and upgrade my in-mast wiring. Currently the vhf antenna is wired with RG-58, and I would like to upgrade to RG-213, which is, I believe, a bit larger in diameter. The existing wiring is neatly packed in a plastic raceway that runs the length

Re: Stus-List VHF / AIS

I had a wired remote mic on my old Catalina 27 with a tiller. That never worked very well for me because the cord kept getting in the way. When I bought Firewater, I installed the Simrad RS25, which is the predecessor to the 35. It has the wireless remote, but not AIS. At that time, the

Re: Stus-List Engine Room Original Paint (Damian Greene)

Bob, You can get a lead paint test kit for $10 in Home Depot etc. That will answer the question definitively. Regards, Damian Greene GHOST 1982 C 34 Bass Harbor, Maine   It wasn’t outlawred until ’78, so there is probably a goodchance, unfortunately.   Bill Coleman C 39 Erie, PA   From:

Re: Stus-List Interior finishes - 84 33ii and others of that vintage.

Answering my own post For the sake of future archive searchers. the 33ii owners manual states the interior is oiled teak. Windstar's saloon table top is varnished, probably was originally, and has been disassembled and will be refinished. The base was originally oiled teak, and has now been

Stus-List In mast wiring

We changed out the wiring for the wind instrument last summer on Pulse, our '85 33 MkII, it was enclosed in a plastic tube that was loose in the mast. It slid down and captured the wiring harness as we were pulling the new down from the top of the mast, took us 2 hours to figure out what had

Re: Stus-List 33ii, 35iii others? In-mast wiring question, vhf RG-213

Yes, I have replaced most of the wiring in my mast on my C It actually has two separate conduits for wiring, although I think one side only goes up as far as the spreaders. You should be able to split up the wires so they will fit in the conduit. My advice is to use the old wires/cable to pull

Re: Stus-List 10. Re: Acoustic insulation in Canada (Dreuge)

there are more impactful opportunities for noise abatement than the bestest ever insulation...agree Dwight Veinot C 35 MKII, *Alianna* Head of St. Margaret's Bay, NS d.ve...@bellaliant.net On Sat, Jan 9, 2016 at 9:54 AM, Dave Syer via CnC-List < cnc-list@cnc-list.com> wrote: > Was at the

Re: Stus-List Lexan hychcovers in GTA

At the Toronto boat show Ontario Plastic Fabricators www.ontarioplastics.ca had a booth. Located in east end Toronto. They have Lexan listed on their handout ... colours and smokes 25% premium on the listed cost. No affiliation and have not purchased from them previously. Ed Prime Interest

Re: Stus-List 10. Re: Acoustic insulation in Canada (Dreuge)

Just press the link and delete anything beyond ".pdf" -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Leslie Paal via CnC-List Sent: Saturday, January 09, 2016 18:04 To: cnc-list@cnc-list.com Cc: Leslie Paal Subject: Re:

Re: Stus-List 10. Re: Acoustic insulation in Canada (Dreuge)

the link does not appear to work. :-( Leslie. On Sat, 1/9/16, Dave Syer via CnC-List wrote: Subject: Stus-List 10. Re: Acoustic insulation in Canada (Dreuge) To: cnc-list@cnc-list.com Cc: "Dave Syer"

Re: Stus-List Lexan hychcovers in GTA

Hi Ed, Thanks for the warning. I think I will avoid the Troana Boat Show... most of the others offer a discount. :) Cheers, Russ Sweet 35 mk-1 At 03:25 PM 09/01/2016, you wrote: At the Toronto boat show Ontario Plastic Fabricators

Stus-List Lemon oil cause mildew?

Ok, so under the advise of this list I used lemon oil at the beginning of the 2015 season. I chalked up the mildew this last fall to the unusually high humidity and excessive rain. That was until this evening when someone told me that they had heard that the lemon oil gave the mildew something

Stus-List Bottom paint help needed

Interlux Ultra with Biolux. How much paint should I need to paint my C 30 MK1 with 2 coats? 30 foot long and 10 foot beam? -- *Best regards,* *Curtis McDaniel, * *C 30-MK1 East Coast Lady* Twenty years from now you will be more disappointed by the things that you didn't do than by the ones

Re: Stus-List Bottom paint help needed

1 gallon will probably be sufficient. I buy 2 for my 37+ and I usually have plenty for a second coat on the leading edges and the waterline and still have left over. The cans often have advice on the square footage of coverage per can. Josh Muckley S/V Sea Hawk 1989 C 37+ Solomons, MD On Jan 9,

Re: Stus-List Bottom paint help needed

I've always needed just over 1gal to do a complete job.  Maybe I could do it thinner, but I don't think so.  When I try to get by with one gallon, I paint the first third completely, the leading edge of the keel, the complete rudder and the first foot of depth.  Then I do a very light and

Re: Stus-List Bottom paint help needed

Hi Curtis, You'll probably need 5 litres. I use about 6 litres. Sucks, yes. On the bright side, if you had the larger boat you would need 9 litres. :) Cheers, Russ Sweet 35 mk-1 At 07:39 PM 09/01/2016, you wrote: Interlux Ultra with Biolux. How much paint should I need to

Stus-List Through -hull fittings

Hi guys,  Can anyone tell me if C's have a solid hull around through- hull fittings ie water can't penetrate the balsa-core around original located fittings or should I check and replace the core with epoxy. Thanks Larry.  Sent from my GT-I9305T on the Telstra 4G

Re: Stus-List Lemon oil cause mildew?

Here are some solutions, http://www.simplehouseholdtips.com/ways-to-kill-mold-and-mildew-naturally.html Richard Davis Skycatcher 1987 C 38 mk111 Oxnard, CA___ Email