Stus-List Rental Inquiry

I apologize in advance for using this list for a non-boating inquiry. My son is moving to Southern California in February, and is trying to find a house or apartment to rent in Irvine, Tustin or Santa Ana. If anyone knows of something that might be in one of those cities, please contact me off

Re: Stus-List Adding asym sail/sprit to C 36

Depends on the locality. E.g. HRYRA (Hudson River) and YRALIS (Long Island Sound) only allow one cert per boat, and one change to the cert per year. I believe this was to discourage to using a different cert for different conditions. E.g. declare a 155% for summer and light wind and declare a

Re: Stus-List 2018 Mid-Atlantic C rendezvous

Darn inflation… ☹ Neil Neil Andersen FoxFire - 1982 C Rock Hall, MD +++ Save money and the environment. Use Century Gothic font and save 30% of your ink From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joe via CnC-List Sent: Wednesday,

Re: Stus-List 2018 Mid-Atlantic C rendezvous

Moorings are more like $35 now! Joe Coquina On 01/31/2018 01:44 PM, Neil E. Andersen via CnC-List wrote: Don’t forget the mooring are (or at least used to be) $15/day with water taxi service that is only a couple of bucks per person. Neil Neil Andersen FoxFire - 1982 C Rock Hall, MD

Re: Stus-List Adding asym sail/sprit to C 36

Eric, Will PHRF allow you two ratings? One with the sprit and one with the pole? I'm considering adding a sprit and top down furler for single handed races. > On January 31, 2018 at 10:47 AM Eric Baumes via CnC-List > wrote: > > That is in place of a standard spin

Re: Stus-List 2018 Mid-Atlantic C rendezvous

Don’t forget the mooring are (or at least used to be) $15/day with water taxi service that is only a couple of bucks per person. Neil Neil Andersen FoxFire - 1982 C Rock Hall, MD LinkedIn: www.linkedin.com/pub/neil-andersen/0/239/a36/

Re: Stus-List Vented loop for engine above exhaust elbow?

Patrick; The PO installed the new Universal M35B using the basic exhaust elbow available from Westerbeke instead of a riser, which put the high point of the exhaust 6 to 8 inches above the waterline, to port of the centerline of the boat. Because of the geography aft of the engine on a 38

Re: Stus-List Adding asym sail/sprit to C 36

That is in place of a standard spin and pole. If you declare both Asym on sprit and Symmetrical on pole you will get a PHRF penalty. Eric On Wed, Jan 31, 2018 at 8:24 AM, Hoyt, Mike via CnC-List < cnc-list@cnc-list.com> wrote: > Hi Eric > > > > When you say YRALIS allows 24% with no penalty is

Re: Stus-List Adding asym sail/sprit to C 36

At the suggestion of a friend who successfully raced a J 35 for years, I bought an assym for my 42. I did not retrofit a bow sprit, but instead we set the pole low and nearly against the forestay. We fly the sail from about 60 to 110 degrees apparent -- below 110 it is obviously the wrong

Re: Stus-List Vented loop for engine above exhaust elbow?

Breakaweigh has a vented loop. Yanmar engine. Dan Breakaweigh C Halifax NS Sent from my iPhone > On Jan 30, 2018, at 4:53 PM, Patrick Davin via CnC-List > wrote: > > Thanks all. Rick, that's the sort of nightmare story I'm hoping to avoid! > When you say corners were

Re: Stus-List Adding asym sail/sprit to C 36

Hi Eric When you say YRALIS allows 24% with no penalty is that in addition to a standard spin pole and Symmetric spinnaker or in place of the standard pole/spin? Mike Persistence Halifax From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Eric Baumes via CnC-List Sent:

Stus-List (no subject)

unsubscribe ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray