Re: Stus-List Bow light

2017-08-09 Thread David via CnC-List
joel.aron...@gmail.com> Subject: Re: Stus-List Bow light I tried that. It jammed and parted. That's why is was such a PIA. Good luck David! [https://ipmcdn.avast.com/images/icons/icon-envelope-tick-green-avg-v1.png]<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=si

Re: Stus-List Bow light

2017-08-09 Thread Joel Aronson via CnC-List
I tried that. It jammed and parted. That's why is was such a PIA. Good luck David! Virus-free. www.avg.com

Re: Stus-List Bow light

2017-08-09 Thread Rick Rohwer via CnC-List
I used the old wire to pull the new! It may have been dumb luck though! Sometimes even I get some dumb luck! Rick Paikea 37/40 Friday Harbor until 10:00 today and then off to Orcas. Rick Rohwer 509 306 1094 > On Aug 9, 2017, at 06:24, Joel Aronson via CnC-List >

Re: Stus-List Bow light

2017-08-09 Thread Joel Aronson via CnC-List
It is a PIA job! I manged to feed the wire from the bottom and grab the end of the wire with needle nose pliers at the exit hole. Spray the wire with McLube. It will feed easier. Joel On Wed, Aug 9, 2017 at 8:53 AM, David via CnC-List wrote: > So I am trying to

Stus-List Bow light

2017-08-09 Thread David via CnC-List
So I am trying to replace the bow light wire in the pulpit. Tried to work the wire from both ends. Nuthin. Popped the pulpit leg where wire exits thru deck and it looks like a feeder tube thru the deck to lead the wire. It seems I need to remove the whole pulpit to feed a new wire. Am

Re: Stus-List Bow Light...now snaking best practices

2017-07-16 Thread svpegasus38 via CnC-List
(for sale)Lf38  Significant Other LF39  Original message From: "Dennis C. via CnC-List" <cnc-list@cnc-list.com> Date: 7/16/17 12:23 (GMT-08:00) To: CnClist <cnc-list@cnc-list.com> Cc: "Dennis C." <capt...@gmail.com> Subject: Re: Stus-List

Re: Stus-List Bow Light...now snaking best practices

2017-07-16 Thread Dennis C. via CnC-List
n advance. > > 1981 40-2 > > > > Sent from my Verizon 4G LTE smartphone > > > Original message > From: svpegasus38 via CnC-List <cnc-list@cnc-list.com> > Date: 7/16/17 1:40 PM (GMT-05:00) > To: cnc-list@cnc-list.com > Cc: svpegasus38

Re: Stus-List Bow Light...now snaking best practices

2017-07-16 Thread David via CnC-List
cnc-list.com> Date: 7/16/17 1:40 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: svpegasus38 <svpegasu...@gmail.com> Subject: Re: Stus-List Bow Light... You have a corroded wire/connection somewhere in the run. Most likely it is in or near the anchor locker. Or the fixture its self.Look for corr

Re: Stus-List Bow Light...

2017-07-16 Thread David via CnC-List
com Cc: svpegasus38 <svpegasu...@gmail.com> Subject: Re: Stus-List Bow Light... You have a corroded wire/connection somewhere in the run. Most likely it is in or near the anchor locker. Or the fixture its self.Look for corrosion at any location where moisture could be. Water can wick up a wire

Re: Stus-List Bow Light...

2017-07-16 Thread svpegasus38 via CnC-List
-list.com> Cc: David <davidrisc...@msn.com> Subject: Stus-List Bow Light... ...is only producing 6.75 volts.  I suspect it's grounding somewhere along its run. Before I do the dreaded refeeding of a new wire...any thoughts out there as to what I  might be missing? FYI...Stern lig

Stus-List Bow Light...

2017-07-16 Thread David via CnC-List
...is only producing 6.75 volts. I suspect it's grounding somewhere along its run. Before I do the dreaded refeeding of a new wire...any thoughts out there as to what I might be missing? FYI...Stern light is working fine... Thanks in advance... Sent from my Verizon 4G LTE smartphone