-list@cnc-list.com
Sent: Tuesday, August 12, 2014 3:54:45 PM
Subject: Re: Stus-List Engine stalling after shifting
Dave,
How low is the idle speed?
Joel
On Tue, Aug 12, 2014 at 3:49 PM, David Knecht via CnC-List
cnc-list@cnc-list.com wrote:
The Universal M4-30 in my boat tends to stall
I got a laser-tach from Amazon for ~$20. It came with reflective tape
which you cut to size. I put a piece on the main pully and transmission
output shaft. I used it to make sure of the accuracy of the installed tach
and verify the gear ratio. Then I also used it to set the low idle speed.
Low
Dave,
How low is the idle speed?
Joel
On Tue, Aug 12, 2014 at 3:49 PM, David Knecht via CnC-List
cnc-list@cnc-list.com wrote:
The Universal M4-30 in my boat tends to stall frequently when shifting.
This primarily happens when moving forward and shifting into reverse,
which is of course
I had the same problem and did two things.
1. I made sure the fuel system was well bled A small amount of air
trapped in the high pressure lines can create a lot of trouble with idle
and stalling.
2. The second thing I did was add Howe's diesel fuel treatment to the fuel
every time I fill