[collectd] SNMP polling of switch sensors (complex SNMP setup I can't figure out)

Hi list, I have a series of Cisco switches with sensors on each port measuring Tx/Rx power, temperatures etc. I'm not sure however how to configure the SNMP plugin to poll this. My primary index for looking up data is the ifIndex, and secondarily the interface name. IF-MIB::ifIndex.148 = INTEGER

Re: [collectd] SNMP polling of switch sensors (complex SNMP setup I can't figure out)

e all the sensors data in one file and have them connected to the right interface but this seems a bit, impossible right now... Brgds, Stian Øvrevåge On Wed, Feb 29, 2012 at 10:24 PM, Stian Øvrevåge wrote: > Hi list, > > I have a series of Cisco switches with sensors on each port measuring

[collectd] Force StepSize on rrdcached plugin

Hi, In the documentation there are some options for the rrdtool plugin with regards to StepSize and some RRA-specifics. I am dependent on tuning these values. However, I'm using the rrdcached plugin, not rrdtool. How to proceed? Thanks in advance Regards, Stian Øvr

[collectd] rrdc_update failed with status -1

217: Flags [.], ack 176, win 357, options [nop,nop,TS val 133288705 ecr 133288705], length 0 E..4x.@.@."e).. Regards, Stian Øvrevåge ___ collectd mailing list collectd@verplant.org http://mailman.verplant.org/listinfo/collectd

Re: [collectd] rrdc_update failed with status -1

ction handled by collectd is somewhat faulty... I can connect to rrdcached by telnet and issue commands without problem... Brgds, Stian Øvrevåge On Mon, Mar 26, 2012 at 9:57 PM, Cyril Feraudet wrote: > Hi, > > Many issue : > - Your rrd was updated before with a value in the future : rrd

Re: [collectd] rrdc_update failed with status -1

ard_err_que-Vlan1328.rrd 1332797090:0:0:0:0 . 0 errors quit Connection closed by foreign host. Regards, Stian Øvrevåge On Mon, Mar 26, 2012 at 10:08 PM, Cyril Feraudet wrote: > Have look to "-P" option of rrdcached about permission. > > I've debugged some issue wit

[collectd] Max number of UDP sockets per collectd-process (NOT the file descriptor limit)

Which leads me to believe that there is a per-process(or thread?) limit somewhere. Information on the internet on the issue is scarce other than the file descriptor limit which I believe is unrelated. Regards, Stian Øvrevåge ___ collectd mailing list c

Re: [collectd] Max number of UDP sockets per collectd-process (NOT the file descriptor limit)

(2) system call which doesn't have a static limit on the largest file descriptor it can handle." So my current work-around and using several collectd processes seems to be a permanent one :-) Brgds Stian Øvrevåge On Thu, Apr 12, 2012 at 11:21, Stian Øvrevåge wrote: > Hi list, > >

[collectd] Unable to SNMP collect two-dimensional(?) table

(Using collectd 5.0.3 currently) Best regads, Stian Øvrevåge ___ collectd mailing list collectd@verplant.org http://mailman.verplant.org/listinfo/collectd

Re: [collectd] Unable to SNMP collect two-dimensional(?) table

Thank you Bill, but notice that I'm not trying to collect the actual sensor data (I'm doing that without problems) but the threshold values for the various sensors, hence the 1-4 index. The equipment is mainly Cisco ME3400 switches. Brgds, Stian Øvrevåge On Mon, Oct 15, 2012 at 1:1

Re: [collectd] Unable to SNMP collect two-dimensional(?) table

> > Mark > > > On Mon, Oct 15, 2012 at 11:45 AM, Stian Øvrevåge > wrote: >> >> Thank you Bill, but notice that I'm not trying to collect the actual >> sensor data (I'm doing that without problems) but the threshold values >> for the various sensor

[collectd] Notifications not working

// Tried with and without this The data is collected fine from the switch: rrdtool lastupdate cisco_cpu-1.rrd cpu5sec cpu1min cpu5min 1352118105: 22.00 10.00 9.00 But nothing is written to the notiftest-file so I'm assuming th

Re: [collectd] Notifications not working

On Tue, Nov 6, 2012 at 7:41 AM, Sebastian Harl wrote: > Hi, > > On Mon, Nov 05, 2012 at 01:31:24PM +0100, Stian Øvrevåge wrote: >> Hi list, trying to configure notifications but I find the >> documentation quite confusing. > > Which parts of the documentation are not cl

[collectd] Collecting number of rows in a SNMP table (or similar)

need a detailed explanation of how to do this, just a Yes or No, if there indeed is a way, I will (atleast try to) figure it out for myself :) Cheers, Stian Øvrevåge ___ collectd mailing list collectd@verplant.org http://mailman.verplant.org/listinfo/collectd

[collectd] SNMPv3

Hi again list, Does anyone know when and if SNMPv3 will be supported in the snmp-plugin? Cheers, Stian Øvrevåge ___ collectd mailing list collectd@verplant.org http://mailman.verplant.org/listinfo/collectd

[collectd] Changing and "non-standard" OIDs

le or that is too hard for me to do on my own :) Cheers and TIA Stian Øvrevåge ___ collectd mailing list collectd@verplant.org http://mailman.verplant.org/listinfo/collectd

Re: [collectd] No way to use collectd + bind plugin

On Thu, Apr 15, 2010 at 5:18 PM, HYORDEY Julian wrote: > Hi there, > > Firstly, sorry for my english.. ;-) > > Well, my problem is I can't see the graph with bind plugin. Collectd and my > bind server are one the same computer, on a public IP, what I want is > connect to http://publicIP:8053 (from

[collectd] Different intervals on different interfaces on the same switch.

asing intensity for special incidents). I have ~3-4000 switchports to monitor so keep that in mind :) Cheers, Stian Øvrevåge ___ collectd mailing list collectd@verplant.org http://mailman.verplant.org/listinfo/collectd