On August 31, 2009 02:58:50 pm Cameron Frazier wrote:
I'll be arriving in Munich so that'll be where I'll pick up the SIM.
Since a good number of the community are from those areas, I'd like to
ask your advice on a carrier/options for all this.
Any suggestions?
Last time I went to Germany
Hi All,
After some deliberation and input from the community I am going to stop
maintaining Om2009. I'm going work on getting paroli to co-exsist in SHR.
If you want to try and run paroli in SHR unstable RFN. Flash the latest shr-
unstable image.
On August 27, 2009 12:53:44 am Ken Young wrote:
This should not be interpreted as paroli being abandoned as paroli is in
the SHR feeds. I haven't tested it, but getting it to work would be one
of my first tasks if it doesn't.
paroli has a LOT of fans, and your work on it is greatly
On August 26, 2009 09:13:11 am pike wrote:
I *guess* I messed up the alsa-state
files permanently. What's the easiest
way to revert them back to their original
settings ? I was thinking to opkg-remove,
opkg-install something ?
opkg install -force-reinstall openmoko-alsa-scenarios
Angus
Hi All,
I've been encouraged by a couple of persistent community members to post an
update to Om2009. First ( other than taking some time off for the summer ) I'll
tell you what I've been working on.
I've been working on getting the 2.6.30 kernel with openwrt patches running.
After a dismal
On August 6, 2009 09:07:40 pm c_c wrote:
Hi,
I also get the following error :-
usb 2-2: new full speed USB device using ohci_hcd and address 7
usb 2-2: configuration #1 chosen from 2 choices
eth1: register 'cdc_ether' at usb-:00:0b.0-2, CDC Ethernet Device,
00:1f:11:01:2a:26
On August 6, 2009 05:17:25 am Laszlo KREKACS wrote:
I assume every hardware related function should pass through fso.
But I would be interested what are the exact steps/commands when a suspend
gets initiated, and why suspend duration are about 5 sec and
resume about 2-3 sec...
The 2 biggest
On August 6, 2009 08:45:01 am Michael 'Mickey' Lauer wrote:
FWIW, fso-abyss is handling these nasty deep-sleep issues nowadays, in a
better way than ogsmd ever did.
:M:
The next Om2009 testing release will use fso-abyss and fsousaged. If you'd
like to try before the next release ( which
On August 6, 2009 01:26:16 pm Marcel wrote:
May I also be successful with that on a 2009t5 install? My sd card is full
of data and I don't want to kill the present t5 installation with all the
apps...
There are quite a few dependencies that probably won't upgrade automatically.
You will
On August 6, 2009 07:38:25 pm tom wrote:
im basically having the same, though my machine says:
connection refused
ideas?
Connect refused is a different problem . Can you ping the ip address of the FR?
Have you changed the dropbear config on the FR side ?
Angus
What does dmesg on the host side tell you when you plug the device in. After
the first boot it should show up as ethx.
Angus
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
On August 4, 2009 12:35:12 am Laszlo KREKACS wrote:
Hi!
So Im looking to something more professional look,
I want to buy between 10 and 30 pieces. So the home-made
version is a no-go (no matter how nice electrical-wise).
Hey Laszlo,
Energizer has the Energi to go series of products.
On July 27, 2009 03:04:30 am Adolph J. Vogel wrote:
I must admit this whole thread is starting to worry me. I don`t mean to
pester but could someone please provide some clarrification on the status
of Om2009 / Paroli?
Om2009 is moving forward very slowly at the moment. My time is currently
On July 15, 2009 12:29:06 am Brolin Empey wrote:
Hello list,
I am planning on buying a FreeRunner. I need to check with my carrier
(Speak Out Wireless in Canada) about cellular usage outside of my home
area, but I may want to use my FreeRunner without cellular service. Is
this possible?
On July 15, 2009 02:16:36 am c_c wrote:
Hi,
Angus Ainslie-2 wrote:
You register a known sim with SMS-sentry and if it gets changed the phone
sends it's location to a predefined
number.
Ha ! Neat solution to the problem. Hope you add that soon.
I added sms-sentry to github[1] so
On July 15, 2009 10:11:28 am Previdi Roberto wrote:
thank you very much, this worked percfectly! How can i know the complete
list of configuration files wich i should not update on updates?
Unless specified in the release notes you should not install new versions of :
On July 14, 2009 07:15:13 am Previdi Roberto wrote:
hello list. I updated my OM2009 installation (3-4 days old) with opkg
update - opkg upgrade. After having accepted the new config files and
rebooted the gsm service cannot start anymore.
Please post /etc/frameworkd.conf and
On July 14, 2009 06:43:43 am Evgeniy Ginzburg wrote:
Wow!
Very impressive!
So it'll be very easy to track you Frerunner back.
Just add call to some script to silently report GPS location by SMS or
(ab)using GRPS connection.
And AFAIR it was heavily requested feature some time ago
On July 12, 2009 07:52:36 am Previdi Roberto wrote:
On Sun, Jul 12, 2009 at 4:33 AM, Angus Ainslie nyt...@openmoko.org wrote:
On July 11, 2009 06:18:38 pm Previdi Roberto wrote:
I downloaded the image at
http://downloads.openmoko.org/distro/testing/NeoFreerunner/
but the contained
On July 11, 2009 06:18:38 pm Previdi Roberto wrote:
I downloaded the image at
http://downloads.openmoko.org/distro/testing/NeoFreerunner/
but the contained kernel (2.6.29-rc2) don't boot (it give a lot of i/o
errors and then kernel panic).
I installed those images yesterday and they were
On July 5, 2009 01:11:00 pm matthias wrote:
Hello dear list,
i tried an
opkg update opkg upgrade
but the files in the package-lists don't seem to match the ones in the
repository.
I get an 404 for every package to download:
Collected errors:
* Failed to download
need to get a comment from an OM employee.
I now understand (via irc) that openmoko are no longer maintaining any
distributions, and that Om2009 is produced and maintained by Angus
Ainslie (nytowl).
I am still doing maintenance on a volunteer and very part time basis.
The build servers
Here is the proper address for questions.
You might also like to try the wiki
http://wiki.openmoko.org/wiki/Main_Page
Angus
-- Forwarded Message --
Subject: help me
Date: June 23, 2009
From: qu kai qukaim...@gmail.com
To: nyt...@openmoko.org
Hello:
I bought a
On June 19, 2009 08:04:39 am Marcel wrote:
Another issue: I called the neo from landline just to see if it helps
(sets gsmhandset.state I suppose...). Paroli doesn't notice that I
cancelled the call on landline and continues vibrating. No ringtone. And
Paroli seems to have crashed, too...
On June 19, 2009 07:27:49 am Michal Brzozowski wrote:
Is there a way to make Paroli and frameworkd keep old logs and not deleting
them?
Michal
Check here under log directory
http://wiki.openmoko.org/wiki/Om_2009#Using_OM2009
Angus
___
Openmoko
On June 16, 2009 04:44:22 pm Warren Baird wrote:
Woot - I'm trying the opkg update ; opkg upgrade approach now. I look
forward to the improvements a lot.
One question - is the 'bind-home' approach documented somewhere? Both
google and searching on the wiki haven't helped me find info on
Hi All,
There have been some major show stoppers fixed in the last week. As
usual there are additional instructions here.
http://wiki.openmoko.org/wiki/Om2009
There is also a new page for community involvement. Many of these wishlist
items need someone to implement them. If you are interested
On Jun 11, 2009, at 2:50 AM, David Reyes Samblas Martinez da...@tuxbrain.com
wrote:
The openmoko-fso-paroli-image-glibc-ipk--20090611-om-
gta02.rootfs.tar.gz
doesn't boot X it remains in console, in fact it lacks of x11 init
scripts deamon /etc/init.d/xserver-nodm
yes I know the
On June 10, 2009 04:17:27 am ivanshirok...@gmail.com wrote:
Hello. Yesterday I've flashed new testing image of OM2009. Must say it
works pretty good.
But I've got a couple of problems:
1) Can't use Internet.
It successfully connects to bouth of my wifi routers, acquires DNS
servers so I
On June 8, 2009 12:51:30 pm chlework2...@yahoo.com wrote:
this is latest images from web, i dowloaded and trying to booting from mSD.
modules-2.6.28-stable+gitr0+f19f259d3c1afde8eae53983fd19f61831927413-r2-om-
gta02.gz
following this instructions?
On June 5, 2009 02:31:16 am Patryk Benderz wrote:
Looks like these:
http://downloads.openmoko.org/distro/testing/NeoFreerunner/
are the same images i downloaded last time, May 21st.
Am i looking for them at right place?
The testing images haven't changed but the unstable ones have had
On June 2, 2009 08:37:21 am ivvmm wrote:
I'm running Slackware and this obviously will not work. What am I
supposed to do?
P.S. sudo /sbin/ip l set eth0 down sudp /sbin/ip l set eth0 up will
not help
Never used slackware but something like below should work on most unix's
ifconfig ethx
On June 1, 2009 08:54:51 am ivvmm wrote:
Read the section for Slackware on that wiki page. This way that will do
the right routing whatever the interface is called so you will not have
to think how is it named at this time.
As for me, I experience another problem: cannot connect to the
On May 26, 2009 03:09:20 pm Marcel wrote:
Hello,
I have installed intone 0.51 from
http://www.opkg.org/packages/intone_0.51_arm.ipk (where the dependency
libelementary0 is still there). Once I launch it, the binary is missing:
r...@d-a318:~# intone
intone: error while loading shared
On May 21, 2009 06:37:28 pm Al Johnson wrote:
That looks like the release version where the GUI crashes if you try to
access the preferences. This was a bug in the release version if built
without video support, and has been fixed in svn. The attached recipe
worked using autorev just after
On May 21, 2009 07:22:15 am Robin Paulson wrote:
that's confusing. i'm trying to install udev-static-devices, because
apparently it will speed up boot time.
it's not listed in the feeds which are on my neo (including
'http://downloads.openmoko.org/repository/testing/armv4t/' as you
listed
On May 21, 2009 09:21:07 am Toni Mueller wrote:
Hi,
On Wed, 20.05.2009 at 04:24:33 -0400, Mirko Lindner mi...@openmoko.com
wrote:
Toni Mueller wrote:
I thought I'd just throw my 0.02 cents into the arena. ;}
Yeah, we want it all :)
while flashing moko11 I've just discovered that
On May 21, 2009 10:46:54 am Toni Mueller wrote:
There was a dialogue in Paroli where I could adjust the time. There, I
entered the time according to my local time zone, being unaware of the
network time stuff. But I'd prefer to configure an /etc/localtime, like
in any other *nix, too. Doing it
Hi All,
As I think we've fixed more things than we broke it's time for another testing
release. As usual there are additional instructions here.
http://wiki.openmoko.org/wiki/Om2009
There is also a new page for community involvement. Many of these wishlist
items need someone to implement
On May 21, 2009 01:48:44 pm Michael Shiloh wrote:
Angus Ainslie wrote:
Hi All,
As I think we've fixed more things than we broke it's time for another
testing release.
You've only updated the rootfs, right? So no changes in the wifi driver?
M
Right you could try the experimental
On May 21, 2009 03:01:48 pm GNUtoo wrote:
Hi,
I've just bitbaken linphonec and I didn't succeed at making it work
I've followed this howto:
http://wiki.openmoko.org/wiki/Linphone
and I've no sound...
Denis.
PS: if there are better recipes I'd like to know where to find them
Linphone 3
Hi Toni
On May 20, 2009 02:11:07 am Toni Mueller wrote:
2. Instead of shutting down, pressing and holding the power button for
an extended period simply powered off the device. I think this is
already known and being worked on, but thought I'd mention it for
completeness.
If you hold the
So far, I didn't really care much for the different keyboards, but if I
can have a wish, I'd like response times like the current keyboard in
Paroli gives (ie, it immediately gives results as fast as I can type),
not as sluggish with 1-2 second pauses between key presses, like in
Om2008.12,
On May 20, 2009 09:14:56 am Risto H. Kurppa wrote:
This is great to hear Angus, that actually OM will also include some
solutions from the community - I guess it means we might have a change
of shipping a more complete distro, not only the very minimal, almost
working stuff. Is there a
On May 18, 2009 11:06:22 am Aapo Rantalainen wrote:
So I first changed profile and surprised happily that there are
terminal (and nano) pre-installed, so I got ssh over wlan working
without any hassling with usb. But then my connection disconnected
because phone suspended. I turn
On May 14, 2009 02:58:38 am Laszlo KREKACS wrote:
Hi!
With the newest om2009 image[1], there is no ringtones when calling.
I used a week older image, where I applied all the paroli patches from git.
There were no problem like this.
Which ringtone are you using ?
Angus
On May 14, 2009 06:30:42 am Laszlo KREKACS wrote:
I also carry the full frameworkd.log, and have one more saved logs
when occured again.
Please include the whole log as an error with frameworkd can occur long before
the problem manifests itself. You can sanitize phone numbers from it but I
On May 14, 2009 08:58:57 am Tom Yates wrote:
On Thu, 14 May 2009, Angus Ainslie wrote:
Please include the whole log as an error with frameworkd can occur long
before the problem manifests itself. You can sanitize phone numbers from
it but I would prefer that no other editing is done
On May 14, 2009 09:50:08 am einstein wrote:
Hi,
yes i think too, it's a kernel problem. i try to use om2009 but with the
kernel, i became the wosd when i wake up the device from the suspend.
i used the 2.6.28kernel
so i try the 2.6.29 kernel from shr. suspend works nice with this
kernel.
On May 14, 2009 01:38:25 pm einstein wrote:
Johny Tenfinger wrote:
On Thu, May 14, 2009 at 21:24, einstein mailingl...@freeyourphone.de
wrote:
with this kernel suspend works good. but i have some sound problems and
wifi problems.
if i make a call, i don't here anything, but the other
Hi Max
Thanks Risto for answering some of these.
On May 13, 2009 04:18:47 am Max wrote:
First of all thank you for hard work Angus.
Hey I just put the lego together you should be thanking Mirko, and the FSO
team.
The very essential things I expect from om-whatever are:
- send and receive
On May 11, 2009 03:34:48 pm Nicola Mfb wrote:
Sorry if I missed this, but how to build om2009? is there instructions
somewhere or a Makefile?
Thanks
Nicola
Hi Nicola,
The build instructions are here
http://wiki.openmoko.org/wiki/OpenEmbedded
The scripts and conf directories that I
On Sun, 2009-05-10 at 22:24 +0300, Risto H. Kurppa wrote:
- some mess sometimes in the top of the screen
Yup, please add it to the bug tracker
- resume doesn't turn on the screen lights - one knows it's resumed
only by touching the screen
please add this too.
- Slow boot time (over 4min
Hi,
Another week of hard work brings a new testing image, lets hear it for the
kernel,
paroli and freesmartphone.org teams. As always it still has some issues ( that
we are still working on )
The gta01 image boots but calling it working is a bit of a stretch.
- Call volume is so low
On Sat, 2009-05-09 at 16:42 +0100, Christian Gagneraud wrote:
Angus Ainslie wrote:
Hi,
[...]
PS for the power users that would just like to do an opkg update; opkg
upgrade it
won't work. At the very minimum you will need to
opkg remove -force-depends frameworkd paroli
On Sat, 2009-05-09 at 22:18 +0200, Hans Zimmerman wrote:
My update sequence showed some errors.
Actions executed:
opkg remove -force-depends frameworkd paroli
opkg update
opkg upgrade
opkg install frameworkd paroli
- paroli did not install because of conflict with the file
On Sun, 2009-05-10 at 00:49 +0400, Alexey Shvetsov wrote:
On Суббота 09 мая 2009 17:36:55 Angus Ainslie wrote:
New feature's in the FSO framework
- Configurable ntp server
- Automatic time setting ( requires GPS or network connection )
- Automatic timezones
On Fri, 2009-05-08 at 10:16 +0100, Tom Yates wrote:
On Thu, 7 May 2009, Angus Ainslie wrote:
Please report them to https://docs.openmoko.org/trac and set the
milestone to Om2009
happy to. i just went off to report my first (that the paroli call screen
often disappears during a call
On Fri, 2009-05-08 at 15:12 +0300, Risto H. Kurppa wrote:
On Fri, May 8, 2009 at 3:02 PM, Risto H. Kurppa ri...@kurppa.fi wrote:
Hi there!
So updating paroli from testing should fix the tele crashing during
calls. Can I just run
On Fri, 2009-05-08 at 19:56 +0530, rakshat hooja wrote:
FYI Risto started Kustomizer and is the main author of Kustomizer 2009
so far so I am pretty sure he already knew this!!!
Rakshat
I thought the name looked familiar, I guess I need more coffee :)
Angus
On Fri, 2009-05-08 at 17:05 +0300, Risto H. Kurppa wrote:
On Fri, May 8, 2009 at 4:54 PM, Marcel tan...@googlemail.com wrote:
Am Freitag, 8. Mai 2009 15:51:40 schrieb Rui Miguel Silva Seabra:
On Fri, May 08, 2009 at 07:04:10PM +0530, rakshat hooja wrote:
I was wondering if FR could
On Thu, 2009-05-07 at 13:19 +0200, Valery Febvre wrote:
It requires a very recent version of python-elementary so I think Podboy
can be run only under SHR :-(
Hi Valery,
Om2009 is using a pretty recent version of python-elementary 40284, is
that recent enough ?
Angus
On Thu, 2009-05-07 at 10:23 +0100, Tom Yates wrote:
where would you like us to report bugs? here, or is there a tracker? and
what about things which are not necessarily bugs (ie, possible RFEs)?
Please report them to https://docs.openmoko.org/trac and set the
milestone to Om2009
two
Hi Ed,
On Thu, 2009-05-07 at 12:18 +0200, Ed Kapitein wrote:
I have a +/- 3 pixel band on the top with random noise and colors.
That is from using qi. We'll check the theme to see if that can be
fixed.
Is it possible to add the use of the aux button to the wiki?
I discovered it by
On Thu, 2009-05-07 at 13:53 +0300, Risto H. Kurppa wrote:
ps. there is a community effort to create a script to add the required
apps hacks to 'plain' 2009 in http://etherpad.com/zt3x1x7ERX - it'll
eventually be the kustomizer for 2009 (for kustomizer, see
On Thu, 2009-05-07 at 23:39 +1000, Carsten Haitzler wrote:
So I need to kill enlightenment each time I quit paroli.
Rather strange.
actually - did you make sure paroli ACTUALLY quit? that it didnt stay running
and just iconify its window?
Currently paroli won't quit. It backgrounds
On Thu, 2009-05-07 at 18:41 +0200, matthias wrote:
There is no bitbake recipe for dictator so far. Unfortunately!
And I think there won't be, cause I don't know how to make one and I
ain't got the time to get used to it.
So, is there someone who can do that? It won't be too hard, for it's
On Tue, 2009-05-05 at 01:04 -0700, KaZeR wrote:
I'll try to test OM2009 soon, because, you're right, it needs user feedback.
But i didn't really want to wipe my working phone.
You could always use the .tar.gz on an sd card ( It boots way faster
that way anyway :)
Angus
On Mon, 2009-05-04 at 17:11 +0300, Yogiz wrote:
Thank you both for the information. I'll use this chance to check out
the new Openmoko 2009 testing image and I'll return to SHR once the
problem gets sorted out.
Om2009 has the same problem as the issue is with e upstream. We are also
Hi,
After flurry of activity in enlightenment, paroli and oepnmebedded we
have a new testing release. There were some problems with the gta01
images so tarballs only are released at this point. Please read
http://wiki.openmoko.org/wiki/Om_2009 for more details.
Features
Paroli settings screen
On Thu, 2009-04-30 at 07:37 -0700, jeremy jozwik wrote:
ive linked both America/Los_Angeles and PST8PDT. date worked once for
each. after i restarted the device, date would return EDT. even with
hwclock setting. so last night i copied PST8PDT from my linux box and
created the link again.
ive
On Wed, 2009-04-29 at 18:44 -0700, c_c wrote:
Hi,
20 odd views and no feedback? Seems like PIM apps aren't really on very
many people's radar :-)
Hi
I'm all for a task app for the Freerunner. If you have an OE recipe I
could add it to the feed.
Angus
On Thu, 2009-04-23 at 10:21 +0200, Marc Verwerft wrote:
Yep , me 2
On Wed, Apr 22, 2009 at 11:29 PM, Piotr Duda openm...@nemezis.eu wrote:
[...]
We will try to find out what people want. Anybody still downloading the
GTA01 images?
yes, me. and there are others. do not forget
On Thu, 2009-04-23 at 23:06 +0200, Petr Vanek wrote:
Hello,
anybody made sms-sentry working in current shr-testing? i wanted to
give it a try (since it is included in shr-testing
(shr-image-om-gta02.jffs2 Apr 19 09:47) but no luck.
Could this be caused by different framework version
Hi Blokkie,
On Wed, 2009-04-22 at 11:08 +0200, blokkie wrote:
Hi ,
I installed the rotate tool but when it's in horizontal position and I press
the power button to put the neo in
stand-by it crashes.
I would love to send a output but I don't know where it's logged .
I've updated the
On Thu, 2009-04-16 at 19:26 +0200, Rask Ingemann Lambertsen wrote:
Are there any chances of building a more recent U-Boot? The one you are
shipping is 8 months old (2008-08-10).
Yes there are I'll make sure a more recent one is built.
Good catch
Angus
On Thu, 2009-04-16 at 18:35 +0200, François TOURDE wrote:
Hi,
First, about future distrib: Whaouh! What a great job Nice work !
Thanks, I'll tell Mirko, Mickey and Nelson too
And now, a few questions:
1) I use fso-image instead of fso-paroli, because I'll be able to launch
other
On Wed, 2009-04-15 at 15:30 +0200, Tomasz Suchan wrote:
On Wed, Apr 15, 2009 at 3:04 PM, Petr Vanek van...@penguin.cz wrote:
thanks for reporting your enthusiasm :D
Is there in 2009.1 the possibility to switch from Paroli to another
application (like TangoGPS) using Illume menu?
this is at
On Wed, 2009-04-15 at 17:06 -0700, arg0 wrote:
When i attempt the build, it errors out with:
NOTE: Checking Package: libmikmod
ERROR: QA Issue: No GNU_HASH in the elf binary:
On Wed, 2009-04-15 at 21:40 -0400, Stephen LePage wrote:
Branch: org.openembedded.dev
Machine: om-gta02
Distro:openmoko
branch needs to be fso/milestone5 or fso/milestone5.5
Angus
___
Openmoko community mailing
As part of the Om2009 release plan testing images were going to start at
the beginning of April. For those brave souls that would like to help us
test Paroli, FSO milestone 5.5 and the Om2009.1 kernel there is a Om2009
information page that contains links to the images and flashing
instructions
On Sat, 2009-04-11 at 20:05 +0200, David Reyes Samblas Martinez wrote:
cool :)
2009/4/11 Yogiz yog...@gmail.com:
AFAIK no funding from Openmoko but FSO is still going strong and they
planned to releaseoool MS 5.5 at the end of this week (tomorrow?) if I'm not
mistaken.
There was
On Tue, 2009-04-07 at 22:53 +0200, Ed Kapitein wrote:
Hi,
With the remainder of march being behind us, can you give an update on
the release plan?
Kind regards,
Ed
Hi Ed,
We are going to put a testing image together for the end of this week.
Because of OM reduced staffing levels some
On Wed, 2009-04-08 at 13:48 -0400, Mark Shewmaker wrote:
Great to hear that.
I'm sending this question privately only because I don't want it to
sound negative in any sense by sending it publicly, but..do you know if
there is a release goal for this release for opkg update and upgrades to
On Tue, 2009-04-07 at 12:09 -0400, Iain B. Findleton wrote:
I have the latest kernel I have found on the .../unstable/ download,
dated Apr 06, 2009, but I do not see any EV_ABS (type 3) events listed
when I access the /dev/input/event[2,3] files. Is there another kernel
out there? Which
Openmoko unstable and anything based on fso/milestone5.5 has stayed
current to the newest revision of enlightenment for over a month now.
Angus
___
Openmoko community mailing list
community@lists.openmoko.org
On Wed, 2009-04-01 at 11:27 +0200, Anas Alzouhbi wrote:
Hello!
I read the document of toolchain on:http://wiki.openmoko.org/wiki/Toolchain
I arrived until this command:
* Extract it directly as root, so use command su first (or
prefix the tar command with sudo when you are using
a chown on directories.
Thank you for you help that I big it
On Tue, Mar 31, 2009 at 4:49 PM, Angus Ainslie nyt...@openmoko.org wrote:
On Tue, 2009-03-31 at 15:45 +0200, Anas Alzouhbi wrote:
hello!
I followed the instruction written in
http://wiki.openembedded.net/index.php/Getting_Started
On Wed, 2009-04-01 at 18:15 +0200, Daniel Willmann wrote:
Hi,
On Mon, 16 Mar 2009 06:59:20 +0900
William Kenworthy bi...@iinet.net.au wrote:
No, otimed sucks for a number of reasons (not the least being hard
coded to an NTP server somewhere in Europe) so control like you are
after is
On Tue, 2009-03-31 at 15:45 +0200, Anas Alzouhbi wrote:
hello!
I followed the instruction written in
http://wiki.openembedded.net/index.php/Getting_Started,
I arrived to this command git clone git://git.openembedded.net/openembedded
but it shows this error:
fatal: could not create work tree
Hi Valery,
Did you mean to release this under the GPL ? If so you should probably
change the references from neon to anti-buzz.
There is already a similar gtk application to this called fso-mixer, you
could look at it if you wanted to add gtk functionality to your app.
Angus
On Thu, 2009-03-05 at 11:53 -0400, Will Siddall wrote:
Hey Pander,
This is a great tool but it does have it's limitations. Most of the
time, you have to be aware of what you attach to your emails and how
many characters you use. Just the sheer fact that you can send emails
to an SMS
On Thu, 2009-03-05 at 20:01 -0800, c_c wrote:
Are the packages in openmoko feed (which Angus says are from
git://git.openembedded.org branch fso/milestone5) going to be the ones
you'll be using in 5.5? The version is svnr39300-r4.
Thanks updated the readme. The binaries at
and feature requests I'm serious they kill
schedules so if you want us to make it don't ask for anything that's not
in the UI spec ( to be released at http://www.paroli-project.org/,
shortly I hope ).
Angus Ainslie
Openmoko Distribution Maintainer
___
Openmoko
On Mon, 2009-03-02 at 18:31 +0100, Florian Hackenberger wrote:
Thanks for keeping us informed of the release schedule! One question
related to paroli comes to mind. I tested paroli (from SVN) with FSO
5.1 and noticed that paroli is meant to be running full screen. Is that
a temporary
On Mon, 2009-03-02 at 09:14 -0700, Angus Ainslie wrote:
During the Beta phase in April and May, the phone will become fully
functional. Full testing will be weekly at this point to try and nail
the stability. Any remaining bugs will need closing. This is when we
need to nail all
On Sun, 2009-03-01 at 15:42 +0900, William Kenworthy wrote:
Yes, there is a description on frameworkd.conf on the wiki. Really,
should be a commented example in the frameword.conf file itself - would
be a lot easier for users.
BillK
I was talking about the example file in git on
Just looked through the example frameworkd.conf and there aren't any
examples of using either the locally configured timezone or manually
setting it in frameworkd.conf.
Is there a way ?
Angus
___
Openmoko community mailing list
On Mon, 2009-02-23 at 12:57 +0800, Arne Brasseur wrote:
Dear community,
I came across this post [1] on planet.openmoko.org. It explains in
Chinese how to compile the latest Andy kernel.
I translated it into English, mainly to practice my Chinese a bit, and
added it to the wiki [2].
On Mon, 2009-02-23 at 13:22 +0100, matthias wrote:
Hello dear list,
does anyone of you know a good way to get PySpeex
(http://www.freenet.org.nz/python/pySpeex/pySpeex-0.2.tar.gz)
packaged?
I was able to compile it on my Freerunner, but that's not the way it
should be distributed or so.
1 - 100 of 162 matches
Mail list logo
