Am Donnerstag, den 05.08.2010, 16:42 +0200 schrieb David Garabana Barro:
http://serdar-dere.net/~serdar/daily/
Are these images real?
Are there Android 2.2 images for Freeruner?
I doubt these images are of any use (yet). Look at the filesizes.
They're just about 7MB, way too small for a
Am Mittwoch, den 09.06.2010, 14:49 +0200 schrieb Peter Nijs:
Is there anyone on this list who can send a cap and some resistors to
somewhere near Leuven, Belgium in an envelope for a reasonable price?
I should have some of the resistors left at home I'd send you just for
the postage from
Hi,
in preparation for checking out android I wanted to see what my GSM
firmware version is as described on this page:
http://wiki.openmoko.org/wiki/GSM/Flashing
Unfortunately I'm not familiar with mdbus2 and FSO and don't know what
to do about this:
r...@om-gta02 ~ # mdbus2 -s
Am Sonntag, den 09.05.2010, 20:04 +0200 schrieb Michael 'Mickey' Lauer:
mic...@saphir:~$ mdbus2 -s
org.freesmartphone.ogsmd /org/freesmartphone/GSM/Device
org.freesmartphone.Info.GetInfo
Works fine, thanks!
Jan
signature.asc
Description: Dies ist ein digital signierter Nachrichtenteil
Am Mittwoch, den 05.05.2010, 01:26 +0200 schrieb Bernd Prünster:
Jan Girlich wrote:
Wooha,
after playing around too much with my installation today I broke it and
reflashed my Freerunner with the lastest SHR unstable. And am stuck!
Where do you guys keep up to date regarding the changes
Am Mittwoch, den 05.05.2010, 08:36 +0200 schrieb Laszlo KREKACS:
On Wed, May 5, 2010 at 7:20 AM, Lars Hennig n...@el-hennig.de wrote:
I am really looking forward to the upgrade of neo theme to illume2 ;-)
And how you close an application in illume2?;-)
For me the top shelf does not slide
Am Mittwoch, den 05.05.2010, 09:39 +0200 schrieb n...@el-hennig.de:
And how you close an application in illume2?;-)
For me the top shelf does not slide down anymore (dunno, what should
be the method
to close the applications)
For me it does not automatically, but as workaraound you can
Jan
#!/usr/bin/python
#
# opkgrepair.py - removes double pkg entries in an opkg status file
#
# usage: opkgrepair.py input-file output-file
#
# Jan Girlich vollk...@cryptobitch.de
import sys
inputdata = open(sys.argv[1], 'r').readlines()
outputfile = open(sys.argv[2], 'w')
state
Wooha,
after playing around too much with my installation today I broke it and
reflashed my Freerunner with the lastest SHR unstable. And am stuck!
Where do you guys keep up to date regarding the changes in the SHR apps?
I installed shr-theme-neo again and noticed that the background and
symbol
Am Donnerstag, den 18.03.2010, 21:45 +0200 schrieb Risto H. Kurppa:
But before doing any of this, you might want to know that there's a
high propability that all your contacts SMS's are gone, and will not
be read from SIM. Someone might be able to point you to some magic to
prevent this from
Am Donnerstag, den 18.03.2010, 04:50 -0800 schrieb Märta:
1) Every time I start a call, the Dialogue screen disappears. I don’t know
why its this way, is there a way to solve this? As I’ve understand you can
modify the Frerunners code by writing scripts into the phones terminal. Is
that
Am Dienstag, den 16.03.2010, 00:36 +0100 schrieb Bernd Prünster:
this is maybe a duplicate and most users prolly know it and the issue
should be fixed in newer images, but still this gives you a *working
phone* back if you have problems:
the root of all evil are missing typed fields.
if
Hi,
just tried to update my phone because pretty much everything is broken
(sms app dies right after opening, no contacts show up in contacts app,
call screen dies after dialing so I can't hang up anymore, yadayada)
But I discovered that when I execute 'opkg list-upgradable' or 'opkg
upgrade'
Am Sonntag, den 14.03.2010, 21:22 +0100 schrieb Jens Seidel:
On Sun, Mar 14, 2010 at 04:20:58PM +0100, Jan Girlich wrote:
r...@om-gta02:~# opkg list-upgradable
python-edbus - 0.3.1+svnr46504-ml0.4 - 0.3.1+svnr46510-ml0.4
[...]
r...@om-gta02:~# opkg install python-edbus
Am Mittwoch, den 03.03.2010, 09:00 +0100 schrieb Erik Andresen:
Would be interested in the Bass-fix.
We'll get that managed, too, if you're in or around Hamburg. I hope
there is as nice documentation for this fix as there is for #1024 and
buzz, b/c I don't know any.
Anyway, please hurry a
Am Dienstag, den 02.03.2010, 00:42 +0100 schrieb Jan Girlich:
Am Montag, den 01.03.2010, 21:47 +0100 schrieb arne anka:
So if you, Christian, or anyone else in or around Hamburg wants some
soldering done on his phone this is the time to speak up and I see what
I can get organized
Am Freitag, den 26.02.2010, 20:33 +0100 schrieb Christian Weßel:
Hi folks,
I am living also near Hamburg and I am also looking for contacts and
help.
I found someone at the Chaos Computer Club chapter in Hamburg who has
experience with SMD soldering and is willing to change the resistor for
Am Montag, den 01.03.2010, 21:47 +0100 schrieb arne anka:
So if you, Christian, or anyone else in or around Hamburg wants some
soldering done on his phone this is the time to speak up and I see what
I can get organized.
here's one too!
i am in hamburg and looking for the #1024 fix.
Am Dienstag, den 23.02.2010, 12:15 + schrieb Al Johnson:
On Tuesday 23 February 2010, Jan Girlich wrote:
Am Dienstag, den 23.02.2010, 10:03 +0300 schrieb Vladimir Berezenko:
В Пнд, 22/02/2010 в 16:00 +0100, Jan Girlich пишет:
I'm afraid something might be gone wrong with my buzz fix
Hi,
since I got my OM debuzzed the mic volume went very soft and I just
found out that it's due to the 2k2 resistor at pads R4303 being either
short circuited or the wrong part (just the bridge it was before?).
If you are living in Hamburg, Germany, have the appropriate tools and
skills and
Am Montag, den 22.02.2010, 13:03 + schrieb Al Johnson:
IIRC the buzz fix reduces the sensitivity of the mic input slightly.
I'm afraid something might be gone wrong with my buzz fix. Had a look at
it yesterday evening and noticed one of the soldering points is really
weak. Maybe that could
Am Montag, den 22.02.2010, 17:25 + schrieb Al Johnson:
It can be hard to tell whether the joint is electrically good just by looking
at it, and solder connections on those components are tiny. You really need
to
use a meter to test it, and I expect this was done by whoever did the fix
Am Montag, den 22.02.2010, 21:36 + schrieb Al Johnson:
And the rest of the buzz fix? Check the resistance of R4303 (mic case to gold
ring) as described in the SOP. It should be 2k2. Also look for shorts between
pads.
Hm. It's hard to place the tips properly on the pads or ends of
Am Dienstag, den 23.02.2010, 10:03 +0300 schrieb Vladimir Berezenko:
В Пнд, 22/02/2010 в 16:00 +0100, Jan Girlich пишет:
I'm afraid something might be gone wrong with my buzz fix. Had a look at
it yesterday evening and noticed one of the soldering points is really
weak. Maybe that could
Hi,
after I got my gta02 A06 a hardware buzz fix late December last year the
mic is very soft with the newest SHR unstable. So I had a look at all
the different tips around and carefully read all emails of the thread
Experiment: better sound on remote end and all links mentioned in
there and
Am Sonntag, den 21.02.2010, 21:33 +0100 schrieb Michael 'Mickey' Lauer:
btw: What is the difference
between /etc/freesmartphone/alsa/default/gsmhandset
This one is used by fsodeviced, i.e. the new stuff that's being used on
SHR.
Good to know. So far I did all changes to both files, but
Am Samstag, den 13.02.2010, 12:40 +0100 schrieb Petr Vanek:
- be able to handle downloads (start external wget process?) or allow
copy of the link into clipboard
- preconfigured to handle https
- fix combo selection widget (IIRC edje theming issue)
- add support for user/pass protected
Am Freitag, den 15.01.2010, 10:04 + schrieb Neil Jerram:
2010/1/15 pike pike-openm...@kw.nl:
I wish there was a form
for his/er (her/is), too...
There is. It's their.
Difference is pike is using singular, you're using plural, Neil. Using
plural just seems like a quick hack to me, the
Hi,
I just got my buzzfix done by Ello as well. Thanks for that! But now I
noticed that people only hear me very *softly* almost not at all, even
when I crank up the mic input volume to max.
Any know bug I just couldn't find? Or maybe a problem with the buzz fix?
Greetings from the Congress!
Am Freitag, den 25.12.2009, 11:18 +0100 schrieb Daniel Willmann:
On 12/24/2009 01:29 AM, Matthias Eller wrote:
Am Freitag 18 Dezember 2009 schrieb Matthias Eller:
I need to order the parts
ok, everything except the 2k2 Ohm 0402 arrived
do you need 2k2 resistors or do you have a
30 matches
Mail list logo