On Tue, Feb 3, 2009 at 5:41 PM, Valery Febvre vfeb...@easter-eggs.comwrote:
Tony Berth wrote:
did you try it on the current SHR unstable cause it doesn't start! It
crashes!
Yes, I use SHR unstable.
For a first install, I think there is no problem.
If a previous release of Neon
Dear list,
I just did an upgrade on the latest SHR unstable image and now isn't
possible to connect via ssh to the FR any more. I get the 'No route to host'
error. Were some changes? I thing the usb0 interface gets a inet6 address
only?
Any advice?
Thanks
Tony
just installed the latest unstable and when booting, networking was fine but
after re-start I can't ssh to FR any more. IPv4 is not set any more!
Any ideas?
Thanks
Tony
___
Openmoko community mailing list
community@lists.openmoko.org
but can't ping google.com from the OM, any idea? I've tried
to set the ip of my gateway machine (192.168.0.200) in /etc/
Resolv.conf, with no success.
Alex
On 30/01/2009, at 14:51, Tony Berth wrote:
just installed the latest unstable and when booting, networking was
fine but
after re
more feedback:
even if I set the IPv4 address directly via the terminal in the FR, I can
connect via ssh from my server but FR doesn't get connection to the Internet
any more! Please not that resolv.conf is holding the correct values.
Thanks
Tony
On Fri, Jan 30, 2009 at 3:48 PM, Tony Berth
On Tue, Dec 16, 2008 at 5:11 PM, Andy Green a...@openmoko.com wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| Okay; two Freerunner units, one restores semi-okay, one's screen
| typically goes all black after an otherwise successful restore
On Thu, Dec 11, 2008 at 8:09 AM, Christoph Pulster openm...@pulster.dewrote:
since i have not heard any other Moko-owner from Greece.
I shipped around 5 units to Greece. We shipped with registeredinsured
DHL airmail parcel. Unfortunately the local Greece post services does
delivery of these
I used 'screen -DR' and went fine
Thanks
On Fri, Dec 12, 2008 at 1:49 AM, roguem...@roguewrt.org wrote:
Hi Tony,
Tony Berth wrote:
Dear Group,
if I 'opkg upgrade' once, shouldn't do the same when I reboot and try to
upgarde one more time? Why does opkg keep 'upgrading'?
Probably
Dear Group,
tried to install debian, followed http://wiki.debian.org/DebianOnFreeRunner,
but when booted from the SD card I get an error cause it can't find
uImage.bin! Any hint what could have been wrong?
Thanks
Tony
___
Openmoko community mailing
where it is, look in the
script) and put it into your first sd-partition. then it's should work..
greets
Tony Berth schrieb:
Dear Group,
tried to install debian, followed
http://wiki.debian.org/DebianOnFreeRunner, but when booted from the
SD card I get an error cause it can't find
the error I get is:
unable to read from uImage.bin
Wrong Image Format
Thanks
On Fri, Dec 12, 2008 at 2:29 PM, Tony Berth tonybe...@googlemail.comwrote:
indeed in the first partition is a uImage.bin file, but doesn't boot! It
claims that can't find that uImage.bin! When I do fdsk on the card
On Fri, Dec 12, 2008 at 2:55 PM, arne anka openm...@ginguppin.de wrote:
Not if you update your NAND uboot to a recent (i.e sometime in the last
four
months or so) version. Then ext2 is fine. I've had mine running this way.
More recent uboot's also have some better charging code and
On Fri, Dec 12, 2008 at 3:07 PM, arne anka openm...@ginguppin.de wrote:
I have the latest gta02v5_and_up-u-boot.bin installed!
So you say that I should use the SD_PART1_FS=vfat ./install.sh all
option?
no. what i am saying is, check in the wiki page you used the section
Adjusting your
unfortunatelly not! The only '.log' which exists in the whole system is:
/var/volatile/tmp/x.log
Thanks
Tony
On Wed, Dec 10, 2008 at 5:28 PM, Thomas Bumbl [EMAIL PROTECTED] wrote:
I think it should be /home/root/*.log
2008/12/10 Tony Berth [EMAIL PROTECTED]
probably a stupid question
Dear Group,
I have Om2008.9-gta02-20081117.rootfs.jffs2 installed updated from the test
repos and was trying to get a qwerty keyboard running. I did follow '
http://www.unixarea.de/openmoko.txt' paragraph 1 but can't see the keyboard
yet!
Any help?
Thanks
Dear Group,
how is it possible to completely remove the Sudoku application which comes
by default with the distro? I don't want just to 'hide' the icon from the
GUI!
Thanks
___
Openmoko community mailing list
community@lists.openmoko.org
Dear Group,
if I 'opkg upgrade' once, shouldn't do the same when I reboot and try to
upgarde one more time? Why does opkg keep 'upgrading'?
Thanks
Tony
___
Openmoko community mailing list
community@lists.openmoko.org
On Sun, Dec 7, 2008 at 7:30 PM, Thomas Bumbl [EMAIL PROTECTED] wrote:
I'd like to announce the initial release of OMoney!
OMoney ... bookkeeping on the go.
One might ask, why the hell do we need a bookkeeping software on a phone?
Because my experience shows that if one does not record the
too though
@Tony Berth:
please post the log and which rootfs you use
everything works fine here
@all: omoney should be available over the shr repo
so just opkg install omoney when you are on shr
2008/12/10, Tony Berth [EMAIL PROTECTED]:
On Sun, Dec 7, 2008 at 7:30 PM, Thomas Bumbl [EMAIL
On Fri, Dec 5, 2008 at 3:25 PM, Tony Berth [EMAIL PROTECTED] wrote:
On Fri, Dec 5, 2008 at 2:45 PM, Andy Green [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| When in BootLoader, shows that there is a card of 3MB
Dear Group,
I know that this topic isn't new to that list but after spending a lot of
time searching the archives, I decided to re-initiate it cause didn't find a
solution and got rather confused :(
I recently installed a new Transcend microSD 8GB card and FR did recognize
it without any
On Thu, Dec 4, 2008 at 7:13 AM, John Lee [EMAIL PROTECTED] wrote:
On Tue, Dec 02, 2008 at 06:34:09PM +0100, Tony Berth wrote:
Dear list,
I just installed the latest 2008.9 kernel and jffs2 and when I connect to
a
debian 4 box it doesn't get listed as a USB device. As a result, I can't
On Fri, Dec 5, 2008 at 2:45 PM, Andy Green [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| When in BootLoader, shows that there is a card of 3MB and when I
| boot with the latest 2008.9 jffs I get following dmesg
On Wed, Dec 3, 2008 at 11:43 AM, Vasco Névoa [EMAIL PROTECTED] wrote:
I've followed the community update tip and upgraded from OM2008.8
stable to testing. After a little havoc caused by the previously
installed gsm0710muxd, I finally got it to work on the GTA02v5.
I've only had it for a day
On 12/3/08, Marco Trevisan (Treviño) [EMAIL PROTECTED] wrote:
Franky Van Liedekerke wrote:
Ok, so I'm feeling totally moronic now ... I'm pretty sure I entered my
microSD card some 3 months ago, but I can't seem to figure out how to
remove it again ... some howto for a gta02? I can't seem to
Dear list,
I just installed the latest 2008.9 kernel and jffs2 and when I connect to a
debian 4 box it doesn't get listed as a USB device. As a result, I can't
establish USB networking. Am I doing something wrong here?
Thanks
Tony
___
Openmoko
On Tue, Dec 2, 2008 at 7:24 PM, Brock [EMAIL PROTECTED] wrote:
You must add g_ether to /etc/modules to get the module to load on
boot.
On 2008.12.02.18.34, Tony Berth wrote:
| Dear list,
|
| I just installed the latest 2008.9 kernel and jffs2 and when I connect to
a
| debian 4 box
On Wed, Nov 12, 2008 at 8:00 PM, Robin Paulson [EMAIL PROTECTED]wrote:
2008/11/13 Yorick Moko [EMAIL PROTECTED]:
On Wed, Nov 12, 2008 at 4:32 PM, Tony Berth [EMAIL PROTECTED]
wrote:
is it possible to use any current microSD card (4 or 8 GB!) and
microSDHCs
as well? Are any hardware
On Thu, Nov 13, 2008 at 4:51 PM, Paul [EMAIL PROTECTED] wrote:
just a last question, how do you guys open the microSD slot if you
want to replace the card? Looks so fragile and I'm worried not to
brake it! I did succeed 2 times up to know but is always a pain! Any
good tips for that?
I
On Thu, Nov 13, 2008 at 4:50 PM, Petr Vanek [EMAIL PROTECTED] wrote:
On Thu, 13 Nov 2008 09:03:53 +
They can reflect the same underlying issue, GPIO control of Glamo pins
that talk to the ASIC in the LCM is broken somehow / sometimes.
| That level shifter is definitely evil, if you pop
On Thu, Nov 13, 2008 at 6:49 PM, Petr Vanek [EMAIL PROTECTED] wrote:
just a general comment, when I switched to the FDOM distro (from the
2008.9) no WSOD problems occured any more!
knowing that fdom is not a distro but only a set of scripts i have to
wonder... can you please post
Hi,
is it possible to use any current microSD card (4 or 8 GB!) and microSDHCs
as well? Are any hardware limitations?
Thanks
Tony
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Hi,
I was trying to power-on my FR but having the battery removed and didn't
succeed! Goes up to a point and then stops! Is a reason for that?
Thanks
Tony
___
Openmoko community mailing list
community@lists.openmoko.org
Sorry you are right! I forgot to mention that it was plugged in the USB
port!
On Tue, Nov 11, 2008 at 10:43 AM, Flyin_bbb8 [EMAIL PROTECTED] wrote:
On Tue, Nov 11, 2008 at 12:35 PM, Tony Berth [EMAIL PROTECTED]wrote:
Hi,
I was trying to power-on my FR but having the battery removed
On Tue, Nov 11, 2008 at 11:03 AM, Christian Adams [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am 11.11.2008 um 10:35 schrieb Tony Berth:
Hi,
I was trying to power-on my FR but having the battery removed and
didn't succeed! Goes up to a point and then stops
Hi Greg,
I have a brand new device (2 weeks old!) and sinve I installed 2008.9
i do face WSOD. Never dropped the device! This issue is a show stopper
as it prevents to use it as a phone.
to the developers: PLEASE give the highest priority to that.
Thanks
Tony
On 11/9/08, Greg [EMAIL
Dear Group,
I'm not very clear which repository I should use when having the 2008.9
image installed. The current opkg conf files point to the 2008.8 repository
and when I try to upgrade nothing occurs. Probably everything is alredy up
to date!
On the other hand, I tried to install minimo.
Indeed that was the problem. 'allow-hotplug' instead of 'auto' is the
solution! PLEASE correct the WIKI asap!
Thanks for your prompt support
Cheers
Tony
On Wed, Nov 5, 2008 at 10:13 PM, joezeewails [EMAIL PROTECTED] wrote:
Stefan Monnier wrote:
That's probably not right. You probably
done!
Thanks
On Thu, Nov 6, 2008 at 11:01 AM, Max Giesbert [EMAIL PROTECTED] wrote:
@Tone Berth: The wiki is a community thing. You should update it yourself.
Tony Berth schrieb:
Indeed that was the problem. 'allow-hotplug' instead of 'auto' is the
solution! PLEASE correct the WIKI asap
the wiki posted solution was tested by myself on a the currebt debian and
did work! Are you using the same environment?
Cheers
Tony
On Thu, Nov 6, 2008 at 10:46 AM, Denis Johnson [EMAIL PROTECTED]wrote:
I have had this setting for months it does not work for me.
Whenever I want to connect
Dear group,
I just installed (following the wiki) 2008.9 on my FR and tried to connect
from a debian box. Applied the following:
---
Debian, Ubuntu and others
Edit /etc/network/interfaces and add:
auto usb0
iface usb0 inet static
address 192.168.0.200
netmask 255.255.255.0
101 - 141 of 141 matches
Mail list logo