reznor writes:
> You just have to know what's going on and then it's easy. That information
> should have been distributed a few months ago and that way that everyone
> gets it who uses Qi. At the fyp forums nobody seemed to know.
You see? Fyp community is disconnected because they use forums, QO
Am Freitag 15 Mai 2009 02:54:06 schrieb Robin Paulson:
> 2009/5/15 Rask Ingemann Lambertsen :
> > On Fri, May 15, 2009 at 11:37:17AM +1200, Robin Paulson wrote:
> >> what's happening, is there anything i can do to further debug things?
> >
> > GSM firmware revision? Have you flashed the moko11 ve
On Thu, May 14, 2009 at 6:45 PM, reznor wrote:
>
> What you do is simple:
> nano /usr/bin/gprsui
> strg+w "search for 20"
> change 20 to 25 or more.
>
> Ill generate a new image 5.4 with some changes including this soon I think.
Yes Please. While you are doing that, would you make some comments
s
navit will not start.
shr-testing 20090502, application execution error.
when run from terminal i get the following:
$ navit
Enabling low-mem workaround...
navit:vehicle_new:invalid type 'gpsd'
navit:convert_to_attrs:failed to create attribute 'flags_forward_mask'
with value '0x402'
navit:con
On Fri, May 15, 2009 at 5:44 AM, jeremy jozwik wrote:
> so after searching for a bit i am failing to find a link for
> libecore_evas.so.0 as an ipk.
> closest mention is this:
> http://lists.openmoko.org/nabble.html#nabble-td2587826i60
>
> but i find no link. any ideas out there?
I think it shoul
so after searching for a bit i am failing to find a link for
libecore_evas.so.0 as an ipk.
closest mention is this:
http://lists.openmoko.org/nabble.html#nabble-td2587826i60
but i find no link. any ideas out there?
On Thu, May 14, 2009 at 4:52 PM, jeremy jozwik wrote:
> yop,
> error loading shar
Nice work c_c!
I like the way the interface is developing, simple and clean.
I have a couple suggestions, if I may:
1) A "Random" option to complement the new "Loop"
The rational for this is obvious I think.
2) Having the back button ("|<<") act as follows:
if t > 0 ) Reset fi
2009/5/15 Joseph Reeves :
> I should update mine to work:
>
> http://www.opkg.org/package_40.html
>
> But if you can use vim you can opkg install it then edit
> /usr/bin/usb.sh as per the instructions on the opkg.org page.
ah, excellent, thanks. i missed those instructions
___
2009/5/15 Rask Ingemann Lambertsen :
> On Fri, May 15, 2009 at 11:37:17AM +1200, Robin Paulson wrote:
>
>> what's happening, is there anything i can do to further debug things?
>
> GSM firmware revision? Have you flashed the moko11 version yet?
>
> http://wiki.openmoko.org/wiki/GSM/Flashing
yeah
On Fri, May 15, 2009 at 11:37:17AM +1200, Robin Paulson wrote:
> what's happening, is there anything i can do to further debug things?
GSM firmware revision? Have you flashed the moko11 version yet?
http://wiki.openmoko.org/wiki/GSM/Flashing
--
Rask Ingemann Lambertsen
Danish law requires a
2009/5/15 jeremy jozwik :
> do you have another phone you can test the sim on? perhaps a friends
> phone. could simply just be bad
yeah, it works fine in my old panasonic - it can register and get text messages
___
Openmoko community mailing list
commun
yop,
error loading shared libraries: libecore_evas.so.0
ill look for an installer for that and try again later tonight.
On Thu, May 14, 2009 at 4:46 PM, Olof Sjobergh wrote:
> On Thu, May 14, 2009 at 6:00 PM, jeremy jozwik
> wrote:
>> shr-testing 20090502:
>> "enlightenment was unable to run t
On Thu, May 14, 2009 at 6:00 PM, jeremy jozwik wrote:
> shr-testing 20090502:
> "enlightenment was unable to run the application enscribi the
> application failed to start"
>
> Zinnia and Zinnia-tomoe-zh installed
>
Could you try to run it from the command line? There might be some
relevant error
do you have another phone you can test the sim on? perhaps a friends
phone. could simply just be bad
On Thu, May 14, 2009 at 4:37 PM, Robin Paulson wrote:
> hi,
> i finally got a new sim today after my previous one died a while back.
> i'm using shr-testing, put the card in and booted up. nothing
hi,
i finally got a new sim today after my previous one died a while back.
i'm using shr-testing, put the card in and booted up. nothing. i ran
settings and turned on the gsm antenna. still nothing. so, i went back
to settings, and the gsm modem had been turned off. re-boot, still
nothing. now when
22. April, that's only 3-4 weeks ago, a bit late. Some people just stopped
using Qi because of that months ago and lost interest also, just like me.
But finally the message arrives. -.-
Nelson Castillo-2 wrote:
>
> On Thu, May 14, 2009 at 5:35 PM, reznor wrote:
>>
>> Works with Qi.
>> You jus
On Thu, May 14, 2009 at 5:35 PM, reznor wrote:
>
> Works with Qi.
> You just have to know what's going on and then it's easy. That information
> should have been distributed a few months ago and that way that everyone
> gets it who uses Qi. At the fyp forums nobody seemed to know.
Hello.
Check t
Works with Qi.
You just have to know what's going on and then it's easy. That information
should have been distributed a few months ago and that way that everyone
gets it who uses Qi. At the fyp forums nobody seemed to know.
--
View this message in context:
http://n2.nabble.com/-neovento-5--ap
Guys, we're few (but good), can we get some highly skilled solder artisan
to help with the debuzzing for our phones?
The only way my GTA02v5 is loud enough to be called normal does carry along
a huge buzz...
Rui
--
Fnord.
Today is Prickle-Prickle, the 61st day of Discord in the YOLD 3175
+ No m
On May 14, 2009 01:38:25 pm einstein wrote:
> Johny Tenfinger wrote:
> > On Thu, May 14, 2009 at 21:24, einstein
wrote:
> >> with this kernel suspend works good. but i have some sound problems and
> >> wifi problems.
> >> if i make a call, i don't here anything, but the other side here my. i
> >>
Fox Mulder wrote:
> einstein wrote:
>
>> Johny Tenfinger wrote:
>>
>>> On Thu, May 14, 2009 at 21:24, einstein
>>> wrote:
>>>
>>>
with this kernel suspend works good. but i have some sound problems and
wifi problems.
if i make a call, i don't here anything, but th
> Now I only get ringtones if the other part hang up before I get
> the paroli call screen. In that case I get ringtone for about 2-3 sec.
> (but the phone calling is already ended)
Angus:
Ok. I spended the whole day on this bug. Finally found it, and could identify
the file, which broke it. (/et
einstein wrote:
> Johny Tenfinger wrote:
>> On Thu, May 14, 2009 at 21:24, einstein wrote:
>>
>>> with this kernel suspend works good. but i have some sound problems and
>>> wifi problems.
>>> if i make a call, i don't here anything, but the other side here my. i
>>> don't here ring ring or any
Johny Tenfinger wrote:
> On Thu, May 14, 2009 at 21:24, einstein wrote:
>
>> with this kernel suspend works good. but i have some sound problems and
>> wifi problems.
>> if i make a call, i don't here anything, but the other side here my. i
>> don't here ring ring or anything else...
>>
>> when
Is there python2.6 image module available somewhere as ipk?
The python-image module doesn't contain the actually Image (import
Image). I am currently trying to extract PIL from debian distro but
installable ipk would be much better anyways...
http://www.angstrom-distribution.org/repo/ doesn't se
On Thu, May 14, 2009 at 21:24, einstein wrote:
> with this kernel suspend works good. but i have some sound problems and
> wifi problems.
> if i make a call, i don't here anything, but the other side here my. i
> don't here ring ring or anything else...
>
> when paroli starts i became a error mess
Angus Ainslie wrote:
> On May 14, 2009 09:50:08 am einstein wrote:
>
>> Hi,
>>
>> yes i think too, it's a kernel problem. i try to use om2009 but with the
>> kernel, i became the wosd when i wake up the device from the suspend.
>> i used the 2.6.28kernel
>>
>> so i try the 2.6.29 kernel from shr
What you do is simple:
nano /usr/bin/gprsui
strg+w "search for 20"
change 20 to 25 or more.
Ill generate a new image 5.4 with some changes including this soon I think.
Sean holmes wrote:
>
> Sean holmes wrote:
>>
>> neovento 5 has the same bug as last time. The gprs ui has to few spaces
>>
On May 14, 2009 09:50:08 am einstein wrote:
> Hi,
>
> yes i think too, it's a kernel problem. i try to use om2009 but with the
> kernel, i became the wosd when i wake up the device from the suspend.
> i used the 2.6.28kernel
>
> so i try the 2.6.29 kernel from shr. suspend works nice with this
> ke
Sean holmes wrote:
>
> neovento 5 has the same bug as last time. The gprs ui has to few spaces
> to enter you APN sever name. keep up the good work.
Paul wrote:
>>Maybe it is too narrow for you, for me it works. I can put
>>"internet.tele2.nl" in it without >>a problem.
>>Perhaps if you share
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am 14.05.2009 um 17:41 schrieb arne anka:
>> not yet as in the past sebastian was creating these .. i think i
>> should have a
>> look at howot create .debs by myself
>> but this will not happen before 20090526 as i am working on an exam
>> until the
On Thu, 14 May 2009, Laszlo KREKACS wrote:
> On Thu, May 14, 2009 at 5:19 PM, Angus Ainslie wrote:
>> You can attach it here .
>> https://docs.openmoko.org/trac/ticket/2284
>
> Done.
ditto.
--
Tom Yates - http://www.teaparty.net
___
Openmo
Hi,
Aargh!!!
I Forgot to modify the state table in the database. Will post an updated
package tomorrow. Till then, if you don't have complicated playlists, do the
following :-
1. ssh to the FR
2. cd /home/root/.intone
3. delete intone_songs.db
4. exit
Start intone - it will create a new
Great job, CC.
This is my dream player!
Thanks a lot!
2009/5/14 c_c
>
> Hi,
> Here's the latest version of intone. Main changes :-
>
> * Settings page to set bass, treble, ui size and playlist looping
> * Album art view toggle. Save the album art image as 'cover.jpg' in the
> songs directory
Hi,
Here's the latest version of intone. Main changes :-
* Settings page to set bass, treble, ui size and playlist looping
* Album art view toggle. Save the album art image as 'cover.jpg' in the
songs directory.
* prevent suspend during playing
* pause on incoming call
Needs the newer e l
Citando Helge Hafting :
> Ouch.
> Having the framework _managing_ the gps (turn on/off, configure,...) is
> fine. But why regenerate the data, what is wrong with pass-through? The
> more cpu work, the more delays. And the gps may very well be used for
> real-time purposes. And of course, 100% of
Sorry about my first post, it was early and I was in a rush. My APN is "
www.voicestream.com" on T-mobile in Oregon.
thanks Sean
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Adam Jimerson wrote:
> Has anyone noticed with the 05/02/2009 release of SHR-Testing that the
> battery
> meter is not reading correctly? While taking a hike and doing some OSM
> tracking I received a Low battery warning, thinking it was real I put an
> early
> stop to it so I could get it ch
Jozef Siska wrote:
> On Wed, May 13, 2009 at 04:58:20PM +0100, Vasco Névoa wrote:
>> I've tried configuring (via frameworkd's om.py) the chip with a 3000ms
>> period between samples, and sure enough gpspipe is outputting only one
>> set of messages per every 3 seconds - so this proves my CFG-RA
shr-testing 20090502:
"enlightenment was unable to run the application enscribi the
application failed to start"
Zinnia and Zinnia-tomoe-zh installed
On Wed, May 13, 2009 at 7:20 AM, Russell Hay wrote:
> Fantastic news... let me know if there's anything I can do!
> Russ
>
>
> 2009/5/13 Olof Sjob
On Thu, May 14, 2009 at 5:19 PM, Angus Ainslie wrote:
> You can attach it here .
> https://docs.openmoko.org/trac/ticket/2284
Done.
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Hi,
yes i think too, it's a kernel problem. i try to use om2009 but with the
kernel, i became the wosd when i wake up the device from the suspend.
i used the 2.6.28kernel
so i try the 2.6.29 kernel from shr. suspend works nice with this
kernel. but i have an error with wifi and no sound. so its
Hi
my freerunner has a problem it freezes with a noise screen of death.
I've checked Om2009, QT Extended improved and SHR.
With all the same the phone falling in sleep and on resume noise screen.
Could someone give me a hint?
I've never had this problem with Om2007.2 or QTextended.
With 2008.8 I
> not yet as in the past sebastian was creating these .. i think i
> should have a
> look at howot create .debs by myself
> but this will not happen before 20090526 as i am working on an exam
> until then
well, whatever you do to create the tarballs, the debian/ structure is
there already.
$ fa
> Which ringtone are you using ?
The default one: phone-ringing.ogg
It is the same with as the one week old image[1].
I do not think it has any relation with the ringtone.
The calling screen appears after five(!) vibration.
Best regards,
Laszlo
[1]: fso-paroli-image-om-gta02.tar.gz from 20090
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am 14.05.2009 um 17:18 schrieb arne anka:
>> i thought, frameworkd is responsible for handling .state-files ..
>
> that was my understanding, too :-)
>
> nevertheless, the question remains, what is opp's handling of the
> headset
> "button" suppose
On May 14, 2009 08:58:57 am Tom Yates wrote:
> On Thu, 14 May 2009, Angus Ainslie wrote:
> > Please include the whole log as an error with frameworkd can occur long
> > before the problem manifests itself. You can sanitize phone numbers from
> > it but I would prefer that no other editing is done.
> i thought, frameworkd is responsible for handling .state-files ..
that was my understanding, too :-)
nevertheless, the question remains, what is opp's handling of the headset
"button" supposed to do?
> but try to use current version of o-p-p availble at project-page
> (https://projects.openm
Sean holmes wrote:
>
> neovento 5 has the same bug as last time. The gprs ui has to few spaces
> to
> enter you APN sever name. keep up the good work.
>
It's not a bug of neovento, it's a bug of the application.
When it's python you could change it by yourself maybe. Or you'll find an
altern
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am 14.05.2009 um 14:49 schrieb arne anka:
> while playing around with the wired headset, i noticed, that
> apparently
> the plug in of the headset does not cause the gsmheadset.state to be
> loaded.
> further investigation turned up that openmoko-p
On Thu, May 14, 2009 at 16:46, Adam Jimerson wrote:
> Has anyone noticed with the 05/02/2009 release of SHR-Testing that the battery
> meter is not reading correctly? While taking a hike and doing some OSM
> tracking I received a Low battery warning, thinking it was real I put an early
> stop to
On Thu, 14 May 2009, Angus Ainslie wrote:
> Please include the whole log as an error with frameworkd can occur long
> before the problem manifests itself. You can sanitize phone numbers from
> it but I would prefer that no other editing is done.
angus:
i have a paroli.log and frameworkd.log fr
I don't have much of a problem there... see this:
http://wiki.openmoko.org/wiki/Neo_FreeRunner_GPS#Configuration_for_a_higher_sampling_rate
However, you must remember that frameworkd sends a lot of
configurations into the chip, and it keeps talking to it, so it might
be a bit of a hassle to ge
Has anyone noticed with the 05/02/2009 release of SHR-Testing that the battery
meter is not reading correctly? While taking a hike and doing some OSM
tracking I received a Low battery warning, thinking it was real I put an early
stop to it so I could get it charging before the battery dies but
Thanks for the hints, GUYS.
Yes, I usually do disable all the message types I don't need, leaving
only GPRMC and GPGGA. :)
I think I've found the bottleneck on this issue, and filed bug #431 on FSO.
http://trac.freesmartphone.org/ticket/431
Citando mqy :
>
> read this: http://www.nabble.com/G
On Thu, May 14, 2009 at 1:10 AM, Staley, Daniel L wrote:
> I recently installed neovento, and I like what has been done!
>
> However, because I flashed the neovento image to the nand, I am running
> pretty low on space for installing new packages (And with the debian repos
> open to me...it is s
Sean holmes wrote:
>
>
> neovento 5 has the same bug as last time. The gprs ui has to few
> spaces to enter you APN sever name. keep up the good work.
>
Maybe it is too narrow for you, for me it works. I can put
"internet.tele2.nl" in it without a problem.
Perhaps if you share how much space
On May 14, 2009 06:30:42 am Laszlo KREKACS wrote:
>
> I also carry the full frameworkd.log, and have one more saved logs
> when occured again.
Please include the whole log as an error with frameworkd can occur long before
the problem manifests itself. You can sanitize phone numbers from it but I
On May 14, 2009 02:58:38 am Laszlo KREKACS wrote:
> Hi!
>
> With the newest om2009 image[1], there is no ringtones when calling.
> I used a week older image, where I applied all the paroli patches from git.
> There were no problem like this.
>
Which ringtone are you using ?
Angus
__
Sean holmes ha scritto:
>
>
> neovento 5 has the same bug as last time. The gprs ui has to few
> spaces to enter you APN sever name. keep up the good work.
>
Could you please use a larger font as yours is unreadable? Thank you :D
Bye!
___
Openmoko
neovento 5 has the same bug as last time. The gprs ui has to few spaces to
enter you APN sever name. keep up the good work.
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
I hope it is not offending to anyone when I ask if personal feuds could
be taken off this list and fought out in private...
Paul
--
A minute's success pays the failure of years.
-Robert Browning
http://www.nlpagan.net
MHC - running on Mandriva 2009.0, Ubuntu 9.04, Netbook Remix & Saucony
(Bef
reznor writes:
> Excuse me, but for not wanting to be offensive you are writing some really
> arrogant crap.
:D
--
Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
mailto:fercer...@gmail.com
___
Openmoko community mailing list
I should update mine to work:
http://www.opkg.org/package_40.html
But if you can use vim you can opkg install it then edit
/usr/bin/usb.sh as per the instructions on the opkg.org page.
If I can find two minutes at some point I'll test / re-package and update.
Cheers, Joseph
2009/5/14 Robin
2009/5/10 Johny Tenfinger :
> On Sun, May 10, 2009 at 02:39, Robin Paulson wrote:
>> where are you finding the revision you quoted?
>
> In shr-unstable, as it was said before ;)
right, after going round the houses, this module is apparently not in
-testing
so, back to the original question:
while playing around with the wired headset, i noticed, that apparently
the plug in of the headset does not cause the gsmheadset.state to be
loaded.
further investigation turned up that openmoko-panel-plugin in he category
"buttons" offers to handle the headset -- looks good, but ...
there's
>> I don't think there is an existing ticket for that, so feel free to open a
>> new one :) And the interesting logs are /var/log/paroli.log
>> /var/log/frameworkd.log
>
> i got a nice failure-to-suspend last night, and snagged a copy of everything
> in /var/log before rebooting the 'moko. if memo
Unfortunately no since flashing a blank NOR is a completely different
thing. Maybe someone from Eindhoven has a Debug Board and can help you?
Am 14.05.2009 um 14:12 schrieb Atilla Filiz:
Hello;
Is it possible to ask for any other minor fix along with debuzzing?
My device came with blank N
Am 14.05.2009 um 12:26 schrieb Tony Berth:
what will be the price of the re-work?
Please refer for all detauls to
http://www.handheld-linux.com/wiki.php?page=Buzz-Rework
Mentioning 'Hermes', you mean these guys: http://www.hermespaketshop.de/
Yes, but I think they operate/origina
I tried again, it works as expected.
KaZeR wrote:
>
>
> Hello list,
>
> I also noticed last time i tried that i wasn't able to filter GPLL, GPGSA
> and friends using the ubxgen script from the wiki.
> Is it related?
>
>
--
View this message in context:
http://n2.nabble.com/-FSO-SHR--ogps
Hello;
Is it possible to ask for any other minor fix along with debuzzing? My
device came with blank NOR and I don't want to buy a debug board just to use
once. I don't mind paying a few extra €s.
--
-
Atilla Filiz
Eindhoven University of
Paul Fertser wrote:
>
> Heh, my remark wasn't meant to be offensive, take it easy ;)
>
> The problem is that i feel neovento guys are separating from the
> developers community by not using our mailing lists and IRC. I've
> heard you're using some web-forum (is it really true?) i can't imagine
>> Why do you suggest this instead of using the correct method?!
>>
> Why didn't you suggest the correct method before, though you knew the
> correct method all the time???
it was suggested -- at least once and i repeated it after seeing that
apparently no one cared to read that.
__
reznor writes:
> Paul Fertser wrote:
>>
>> Why do you suggest this instead of using the correct method?!
>>
> Why didn't you suggest the correct method before, though you knew the
> correct method all the time???
Sorry, i was a bit busy and the thread called "neovento apps" wasn't
of the most i
Paul Fertser wrote:
>
> Why do you suggest this instead of using the correct method?!
>
Why didn't you suggest the correct method before, though you knew the
correct method all the time???
Paul Fertser wrote:
>
> The guy obviously got eth1 on host. Every time. He should have used it
> instea
what will be the price of the re-work?
Mentioning 'Hermes', you mean these guys: http://www.hermespaketshop.de/
Thanks
Tony
On Thu, May 14, 2009 at 11:53 AM, Dr. H. Nikolaus Schaller wrote:
> Dear all,since some of you did not receive our mails (spam filters are
> sometimes too critical), her
Dear all,
since some of you did not receive our mails (spam filters are
sometimes too critical), here a status update:
* components have been released by customs and have finally arrived
* so you can now send devices to us
* please follow the rework service instructions (e.g. just send the
d
On Thu, May 14, 2009 at 10:30 AM, Mile Davidovic
wrote:
> Hello
> According to my understanding Qt handle calls using CPI messages.
> If Moko lost network coverage sometimes after reconnection to provider, Qt
> does not receive CPI messages and therefore
> application do not receive call status ev
Hi!
With the newest om2009 image[1], there is no ringtones when calling.
I used a week older image, where I applied all the paroli patches from git.
There were no problem like this.
Now I only get ringtones if the other part hang up before I get
the paroli call screen. In that case I get ringtone
Hello
According to my understanding Qt handle calls using CPI messages.
If Moko lost network coverage sometimes after reconnection to provider, Qt
does not receive CPI messages and therefore
application do not receive call status events and we are not able to
recognize any incoming or outgoing cal
Hello list,
I also noticed last time i tried that i wasn't able to filter GPLL, GPGSA
and friends using the ubxgen script from the wiki.
Is it related?
--
View this message in context:
http://n2.nabble.com/-FSO-SHR--ogpsd-fso-gpsd%3A-can%27t-get-4Hz-sample-rate-tp2884445p2888680.html
Sent fro
81 matches
Mail list logo