Never mind, now it works. I'm pretty sure that something got wrong
during unmounting operations of my SD. Thanks anyway! :)
Best Regards
Joif
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/c
Hi,
Am 03.05.2012 08:53, schrieb Radek Polak:
> On Wednesday, May 02, 2012 11:04:54 PM francesco.dev...@mailoo.org wrote:
>
>> Il 02/05/2012 18:29, Brian ha scritto:
>>> I'd be willing to bet it's something to do with your Qi setup or the SD
>>> card setup as IIRC Qi polls the SD card first for a
On Wednesday, May 02, 2012 11:04:54 PM francesco.dev...@mailoo.org wrote:
> Il 02/05/2012 18:29, Brian ha scritto:
> > I'd be willing to bet it's something to do with your Qi setup or the SD
> > card setup as IIRC Qi polls the SD card first for a bootable partition
> > and only then boots from NAN
Il 02/05/2012 18:29, Brian ha scritto:
I'd be willing to bet it's something to do with your Qi setup or the SD
card setup as IIRC Qi polls the SD card first for a bootable partition
and only then boots from NAND.
HTH,
Brian
___
Openmoko community ma
On Wed, 02 May 2012 18:04:42 +0200
francesco.dev...@mailoo.org wrote:
> Hi
> Thanks for the new version Radek, fresh installed on my GTA02! It's
> ok on the NAND, but on SD I'm unable to boot it. Qi apparently skips
> the card and it boots from NAND instead. Is it because of the issue
> with the v
Hi
Thanks for the new version Radek, fresh installed on my GTA02! It's ok
on the NAND, but on SD I'm unable to boot it. Qi apparently skips the
card and it boots from NAND instead. Is it because of the issue with the
v44 kernel for the GTA02? Thanks.
Joif
On Tue, 17 Apr 2012 17:27:11 +0200, Radek Polak wrote
> On Tuesday, April 17, 2012 03:00:54 PM Tiago Bortoletto Vaz wrote:
>
> > I'm not sure which version I had in my freerunner before trying to update it
> > to v44. I'd suggest you to write next qtmoko version in /etc/issue{.net}
> > files as it
Got same error while updating.
Rebooted the device and usb networking interface disappeared from laptop
I'm using for FR network connection. cdc_ether module is not autoloading and
dmesg shows nothing
when I connect FR to laptop using USB cable.
On Tue, Apr 17, 2012 at 09:00:54AM -0400, Tiago B
On Tuesday, April 17, 2012 03:00:54 PM Tiago Bortoletto Vaz wrote:
> I'm not sure which version I had in my freerunner before trying to update it
> to v44. I'd suggest you to write next qtmoko version in /etc/issue{.net}
> files as it's not a pure Debian chroot. So users will be able to easily
> i
On Sun, Apr 15, 2012 at 02:23:47PM +, Radek Polak wrote:
> Hi Freerunners,
> QtMoko v44 is now available also for your phone. You can get images from here
> [1] or you can upgrade existing system with simple:
>
> apt-get update
> apt-get upgrade
>
> There are not so many new feat
On Sun, 15 Apr 2012 14:23:47 +
Radek Polak wrote:
> Hi Freerunners,
> QtMoko v44 is now available also for your phone.
Thanks
> You can get images from here
> [1] or you can upgrade existing system with simple:
>
> apt-get update
> apt-get upgrade
>
> There are not so ma
Dnia 2012-04-15, nie o godzinie 14:23 +, Radek Polak pisze:
> Hi Freerunners,
> QtMoko v44 is now available also for your phone.
Thanks a lot! :)
--
Patryk "LeadMan" Benderz
Linux Registered User #377521
() ascii ribbon campaign - against html e-mail
/\ www.asciiribbon.org - against propri
On Sunday 15 April 2012 12:33:47 e...@kapitein.org wrote:
> Somewhat unrelated:
> I found that suspending by echo mem > /sys/power/state sometimes fails and
> "hangs" the FR. (on a 2.6.34 Kernel, on a 2.6.29 kernel it works fine )
> Do you or anyone else know if there is something else required to
On 15.04.2012 14:33, e...@kapitein.org wrote:
> Thanks for your great work!
>
> Somewhat unrelated:
> I found that suspending by echo mem > /sys/power/state sometimes fails and
> "hangs" the FR. (on a 2.6.34 Kernel, on a 2.6.29 kernel it works fine )
> Do you or anyone else know if there is somet
Thanks for your great work!
Somewhat unrelated:
I found that suspending by echo mem > /sys/power/state sometimes fails and
"hangs" the FR. (on a 2.6.34 Kernel, on a 2.6.29 kernel it works fine )
Do you or anyone else know if there is something else required to susspend the
FR?
Kind regards,
Ed
Hi Freerunners,
QtMoko v44 is now available also for your phone. You can get images from here
[1] or you can upgrade existing system with simple:
apt-get update
apt-get upgrade
There are not so many new features. Most of the work went to GTA04 HW
adaptation, but still there is:
16 matches
Mail list logo
