On 4 June 2012 22:55, Benjamin Deering wrote:
> I just went out and tested and the ELM327 does not charge my phone in host
> or device mode. It may be possible to use a Y usb cable to charge and talk
> to ELM327 at the same time if you need to log for longer than the FR battery
> will last. Usin
Jeff,
I just went out and tested and the ELM327 does not charge my phone in
host or device mode. It may be possible to use a Y usb cable to charge
and talk to ELM327 at the same time if you need to log for longer than
the FR battery will last. Using a Y cable in that way could also be
dang
On 4 June 2012 01:23, Benjamin Deering wrote:
> to reprogram the battery's internal regulator. It had no problem powering
> the ELM327, but I would hope that is getting the power from the car's
> electrical system.
I was hoping that the ELM327 could power the FR over USB from the car.
Are you sa
GTA02 seems to be able to supply a lot of power. I have used mine to
charge a Petzl core battery. The charging was less important than using
the GTA02 to reprogram the battery's internal regulator. It had no
problem powering the ELM327, but I would hope that is getting the power
from the c
On 3 June 2012 21:43, Benjamin Deering wrote:
> I've used a usb ELM327 based scanner with my GTA02. I have successfully
> read codes, cleared codes, and watched sensors. I use this program:
> http://code.google.com/p/pyob2read/ but I strip out references to the graph
> library is I couldn't find
I've used a usb ELM327 based scanner with my GTA02. I have successfully
read codes, cleared codes, and watched sensors. I use this program:
http://code.google.com/p/pyob2read/ but I strip out references to the
graph library is I couldn't find it for GTA02. I cant seem to find my
modified scri
Has anybody tried their GTA0[24] with the above device?
Regards
Jeff
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
7 matches
Mail list logo
