>
> From: Paul Fertser
> Date: February 23, 2009 2:09:45 AM GMT+01:00
> To: community@lists.openmoko.org
> Subject: Re: Recommended SIM for Italy ?
> Reply-To: List for Openmoko community discussion
>
>
>
> "GNUtoo" writes:
>> it's a bug in the GSM modem's firmware...it can be updated but I
>> advise
>> you against doing it because there is some command to type and if you
>> makes a typo it can brick your gsm modem
>
> That's a lie.
>
> You can't brick your modem at all, as it has a ROM bootloader.
>
> Dedicated person can damage calibration data and that'd be a
> practically irrecoverable action (CMU-2000 and special soft are needed
> for calibration). BUT it's not as simple as making a typo.
>
> Damaging one's modem by typo is practically impossible, moreover, the
> new moko11 firmware contains quite an important fixes related to
> hardware flow control and resuming from call/sms. As it also fixes all
> known issues with any sim cards, it's worth updating.
Thanks Paul,
I'm trying to flash my GSM firmware and running into a problem.
I get to the point where I run the fluid command line and it just
sits there.
Here are the steps I'm taking for doing the flashing. I'm following
the docs on the wiki
at:
http://wiki.openmoko.org/wiki/GSM/Flashing.
After I get the
Bootloader: (reset target)
message, I run "s3c24xx-gpio b7=1" in another xterm, ssh'ed into the FR.
and the main window just sits there.
Here's the output of what I'm typing in the main window:
r...@om-gta02:/usr/sbin# echo 0 >/sys/bus/platform/devices/neo1973-pm-
gsm.0/power_on
r...@om-gta02:/usr/sbin# echo 1 >/sys/bus/platform/devices/neo1973-pm-
gsm.0/power_on
r...@om-gta02:/usr/sbin# s3c24xx-gpio b7=0
r...@om-gta02:/usr/sbin# echo "a...@poff" >/dev/ttySAC0
r...@om-gta02:/usr/sbin# FLUID_PORT=/dev/ttySAC0 FLUID_FLOWCONTROL=h
fluid.exe \
-oO -b 115200\
-f /home/root/gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-
moko10.m0
FLUID Revision 2.27, (23 Aug 2004). Copyright Texas Instruments,
2001-2004.
Reading image file: '/home/root/
gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-moko10.m0' (2138kB) ok
Bootloader: (reset target)
r...@om-gta02:/usr/sbin# echo 0 >/sys/bus/platform/devices/neo1973-pm-
gsm.0/power_on
r...@om-gta02:/usr/sbin# echo 1 >/sys/bus/platform/devices/neo1973-pm-
gsm.0/power_on
r...@om-gta02:/usr/sbin# s3c24xx-gpio b7=0
r...@om-gta02:/usr/sbin# echo "a...@poff" >/dev/ttySAC0
r...@om-gta02:/usr/sbin# FLUID_PORT=/dev/ttySAC0 FLUID_FLOWCONTROL=h
fluid.exe -oo -b 57600 -f /home/root/gsm_
ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-moko10.m0
FLUID Revision 2.27, (23 Aug 2004). Copyright Texas Instruments,
2001-2004.
Reading image file: '/home/root/
gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-moko10.m0' (2138kB) ok
Bootloader: (reset target)
r...@om-gta02:/usr/sbin# echo 0 >/sys/bus/platform/devices/neo1973-pm-
gsm.0/power_on
r...@om-gta02:/usr/sbin# echo 1 >/sys/bus/platform/devices/neo1973-pm-
gsm.0/power_on
r...@om-gta02:/usr/sbin# echo "a...@poff" >/dev/ttySAC0
r...@om-gta02:/usr/sbin# FLUID_PORT=/dev/ttySAC0 fluid.exe -oo -b
115200 -f /home/root/gsm_ac_gp_fd_pu_em_cph_
ds_vc_cal35_ri_36_amd8_ts0-moko10.m0
FLUID Revision 2.27, (23 Aug 2004). Copyright Texas Instruments,
2001-2004.
Reading image file: '/home/root/
gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-moko10.m0' (2138kB) ok
Bootloader: (reset target)
Help ?
How long should I wait for the Bootloader to respond to the "s3c24xx-
gpio b7=1" command ?
The documentation makes it sound like it should happen right away.
Thanks,
-Steve
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community