2010-10...@07:36 Dr. H. Nikolaus Schaller
Here is the photo of a bare board as it came from the PCB factory:
eh! your baby is growing up!
nice nice nice! :)
--
ALFA21 IS PROVIDED AS IS AND WITHOUT WARRANTIES OF ANY KIND, EXPRESS OR
IMPLIED.
___
On Thu, 21 Oct 2010 09:12:58 +0200, Alfa21 freerun...@my.is.it wrote:
2010-10...@07:36 Dr. H. Nikolaus Schaller
Here is the photo of a bare board as it came from the PCB factory:
eh! your baby is growing up!
nice nice nice! :)
I agree :) Can't wait!
Issue Resolved!!!
Thanks Jose...
/opt/Qtopia/etc/default/Trolltech/Storage.conf
showed:
/dev/mmcblk0p1
instead of:
/dev/mmcblk0p4
I thought that it looked for Documents in:
/media/card/Documents
but clearly, I was wrong...
Thanks,
Nashvin
On Wed, Oct 20, 2010 at 9:55 AM, Jose Luis Perez Diez
Hi,
One question: Do you only consider upgrades of existing Freerunners or
would a complete phone also be an option? My (probably naive) impression
is that you're only missing the case plastics to provide a complete GTA4
phone.
Regards,
Andreas
On 21.10.2010 07:36, Dr. H. Nikolaus Schaller
On Thursday 21 October 2010, Andreas Fischer wrote:
Hi,
One question: Do you only consider upgrades of existing Freerunners or
would a complete phone also be an option? My (probably naive) impression
is that you're only missing the case plastics to provide a complete GTA4
phone.
Most of
The board looks great! Quite professional ;-)
My (probably
naive) impression
is that you're only missing the case plastics to
provide a complete GTA4
phone.
The LCD comes in handy at times, was my first thought...
Most of the parts are here:
http://www.handheld-
On Thursday 21 October 2010, W. B. Kranendonk wrote:
The LCD comes in handy at times, was my first thought...
True, but they're available from many more suppliers than moko plastics! Shame
there isn't a transreflective version though...
___
Openmoko
True, but they're available from many more suppliers than moko plastics! Shame
there isn't a transreflective version though...
I today recieved the plastic parts for a RepRap.
So we can soon start to design and produce the case for new OpenMokos.
Only barrier: We need an extruder and some
Am 21.10.2010 um 17:18 schrieb Andreas Fischer:
Hi,
One question: Do you only consider upgrades of existing Freerunners or
would a complete phone also be an option? My (probably naive) impression
We not only plan these upgrade boards but also complete phones as a long term
goal. Maybe,
Am 21.10.2010 um 18:05 schrieb Al Johnson:
On Thursday 21 October 2010, Andreas Fischer wrote:
Hi,
One question: Do you only consider upgrades of existing Freerunners or
would a complete phone also be an option? My (probably naive) impression
is that you're only missing the case plastics
Am 21.10.2010 um 18:21 schrieb W. B. Kranendonk:
The board looks great! Quite professional ;-)
My (probably
naive) impression
is that you're only missing the case plastics to
provide a complete GTA4
phone.
The LCD comes in handy at times, was my first thought...
Most of the parts are
2010-10...@19:06 David Lanzendörfer
True, but they're available from many more suppliers than moko plastics!
Shame
there isn't a transreflective version though...
I today recieved the plastic parts for a RepRap.
So we can soon start to design and produce the case for new OpenMokos.
Only
O Mércores, 20 de Outubro de 2010, Gennady Kupava escribiu:
Always wanted to test ubifs, so joining experimental branch to test
this. Just installed it, working well so far.
- rootfstype=jffs2 root=/dev/mtdblock6
+ fstype=ubifs ubi.mtd=6,2048 root=ubi0:om-gta02-rootfs
U-boot
В Чтв, 21/10/2010 в 20:57 +0200, David Garabana Barro пишет:
Gennady
Is your 242-glamo-timings uboot ubifs capable?
I cannot boot qtmoko v28 with it, even after changing bootargs...
Hi, David.
Sure, it works ok here. Basically, u-boot's job on nand is only load
kernel from fsless
Hi Grennady,
I notice two times menu_1= , is that intenional or just a typo?
Kind regards,
Ed
On 10/21/2010 08:21 PM, Gennady Kupava wrote:
В Чтв, 21/10/2010 в 20:57 +0200, David Garabana Barro пишет:
Gennady
Is your 242-glamo-timings uboot ubifs capable?
I cannot boot qtmoko v28 with
Hi,
i have rebuilt kernel for qtmoko v28 with patch that eliminates touchscreen
jitter from Gennady. You can download from uImage-v28.1.bin from here [1].
If you run from NAND you can reflash, if you run from uSD you can replace old
one in /boot.
Please note that i have changed the version
Hi, Ed,
Ah, yesterday i were thinking 'interesting, where is my NAND/jffs2
option?' but forgot about it today :) Sure, typo. Updated.
But beware, you should consider my env only as example - it boots sd
card by default, limits sd clock to values appropriate to my card.
Gennady
В Чтв,
(sorry for the duplicate)
Hi list
I am moving to Belgium in a couple of weeks and will buy a(probably prepaid)
line from there. Can anyone tell which company plays well with FR hardware?
I had problems with Vodafone NL before(GSM OK but no GPRS) also with Globul
BG and I don't want this to happen
On 10/21/2010 07:59 PM, Alfa21 wrote:
you should try 3d print like this:
snip
made in ABS which is a good plastic and up to 0.01 inches resolution
Unfortunately, that's not quite good enough (different units).
0.01 inches = 0.254 mm, which is 2.54 times the required size:
On 10/21/2010 07:32
On Friday 22 October 2010, EdorFaus wrote:
On 10/21/2010 07:59 PM, Alfa21 wrote:
you should try 3d print like this:
snip
made in ABS which is a good plastic and up to 0.01 inches resolution
Unfortunately, that's not quite good enough (different units).
0.01 inches = 0.254 mm, which is
20 matches
Mail list logo