Hi ,
The guy responsible for the layout of the pandora released a pcb
description mentioning the solder pads
http://www.openpandora.org/downloads/PANDORA_Hackers_manual_v100.pdf
Since I plan to buy a pandora .. Could you have a closer look to
verify whether the required connectors to attach the
I consider the very last diagramm very funny.
For the future: There is Kicad.
Its also very easy there to create new Chip-Symbols.
Try it out ;-D
But I'm glad to see that there are still people around,
who design the hardware the good old El.Ing.-way.
(Paper and pen)
regards
leviathan
Am 20.06.2010 um 11:09 schrieb Andreas Pokorny:
Hi ,
The guy responsible for the layout of the pandora released a pcb
description mentioning the solder pads
http://www.openpandora.org/downloads/PANDORA_Hackers_manual_v100.pdf
Thanks for the link! Interesting information we might need if
Which option would you prefer?
Since this are too many for us to handle, please let us know the variants you
like. We will then decide which ones we will finally produce.
To simplify the answers, please vote here:
http://www.doodle.com/huagbg7hu94zyame
Ok,
I think this poll
Hi Joerg,
Am 16.06.2010 um 21:51 schrieb Joerg Eesmann:
Hi Nikolaus,
Very good stuff, an open phone with OMAP3530-Power, my dream...
I am a little off topic here, but I take the chance to ask eitherway.
I am thinking about a little simpler NaviBoard.
The actual Naviboard has 2x2 ADC with
On Wednesday 16 June 2010, Dr. H. Nikolaus Schaller wrote:
Hi Alvaro,
Am 16.06.2010 um 01:35 schrieb Álvaro Lopes:
Dr. H. Nikolaus Schaller wrote:
3. PCB and components already soldered on a professional SMT line (we
have one)
And who's we, if I may ask ? I had the impression this
Am 16.06.2010 um 13:34 schrieb Al Johnson:
On Wednesday 16 June 2010, Dr. H. Nikolaus Schaller wrote:
Hi Alvaro,
Am 16.06.2010 um 01:35 schrieb Álvaro Lopes:
Dr. H. Nikolaus Schaller wrote:
3. PCB and components already soldered on a professional SMT line (we
have one)
And who's we,
Le 16/06/2010 14:05, Dr. H. Nikolaus Schaller a écrit :
Am 16.06.2010 um 13:34 schrieb Al Johnson:
On Wednesday 16 June 2010, Dr. H. Nikolaus Schaller wrote:
Hi Alvaro,
Am 16.06.2010 um 01:35 schrieb Álvaro Lopes:
Dr. H. Nikolaus Schaller wrote:
3. PCB and components already soldered on
Anyway, can you please keep focus on the original question (everything
else does not bring us forward):
Which option would you prefer?
1. PCB and very special components only (you can go shopping yourself).
2. PCB and complete component set (unsoldered)
3. PCB and components already
Am 16.06.2010 um 15:51 schrieb Gay, John (GE Energy Services, Non-GE):
Anyway, can you please keep focus on the original question (everything else
does not bring us forward):
Which option would you prefer?
1. PCB and very special components only (you can go shopping yourself).
2. PCB
Le 16/06/2010 17:56, Dr. H. Nikolaus Schaller a écrit :
Am 16.06.2010 um 15:51 schrieb Gay, John (GE Energy Services, Non-GE):
Anyway, can you please keep focus on the original question
(everything else does not bring us forward):
*Which option would you prefer?
*
1. PCB and very special
Dr. H. Nikolaus Schaller wrote:
*Which option would you prefer?
*
1. PCB and very special components only (you can go shopping yourself).
2. PCB and complete component set (unsoldered)
If i got it right a decent soldering kit needed for such an operation
would cost a few hundred bucks...
Hi Nikolaus,
Very good stuff, an open phone with OMAP3530-Power, my dream...
I am a little off topic here, but I take the chance to ask eitherway.
I am thinking about a little simpler NaviBoard.
The actual Naviboard has 2x2 ADC with I2C and one 2axis Gyro(analogue)
and one 1-axis gyro(analogue).
Hi Joerg!
Am Mittwoch 16 Juni 2010, 21:51:53 schrieb Joerg Eesmann:
Hi Nikolaus,
Very good stuff, an open phone with OMAP3530-Power, my dream...
I am a little off topic here, but I take the chance to ask eitherway.
I am thinking about a little simpler NaviBoard.
The actual Naviboard has
Dr. H. Nikolaus Schaller wrote:
3. PCB and components already soldered on a professional SMT line (we
have one)
And who's we, if I may ask ? I had the impression this was only a few-people
project, not sponsored by any means. I doubt any of you have a pro SMT assembly
line.
I'm asking this
Hi Alvaro,
Am 16.06.2010 um 01:35 schrieb Álvaro Lopes:
Dr. H. Nikolaus Schaller wrote:
3. PCB and components already soldered on a professional SMT line (we
have one)
And who's we, if I may ask ? I had the impression this was only a
few-people project, not sponsored by any means. I
On Fri, May 14, 2010 at 5:36 PM, Dr. H. Nikolaus Schaller
h...@computer.orgwrote:
However, you may also want to consider making the parts directly,
without going via a cast. This is much more expensive for larger
quantities, but if you only need a handful of cases anyway, it
should be
Dr. H. Nikolaus Schaller wrote:
There is now a new Wiki page for the project:
http://wiki.openmoko.org/wiki/Openmoko_Beagle_Hybrid
Kewl. But where's the duct tape ? :-)
I have received some questions why we did not put all this into a nice
design. The main reason is that we can't
Am 14.05.2010 um 16:36 schrieb Werner Almesberger:
Dr. H. Nikolaus Schaller wrote:
There is now a new Wiki page for the project:
http://wiki.openmoko.org/wiki/Openmoko_Beagle_Hybrid
Kewl. But where's the duct tape ? :-)
Between PCB and LCM :-)
I have received some questions why we
A really good idea.Looking forward to its release.
R.Sriranjan
On Tue, May 11, 2010 at 1:26 PM, Dr. H. Nikolaus Schaller
h...@computer.orgwrote:
There is now a new Wiki page for the project:
http://wiki.openmoko.org/wiki/Openmoko_Beagle_Hybrid
I have received some questions why we
Am 11.05.2010 um 17:50 schrieb Michael Trimarchi:
Hi,
RANJAN wrote:
A really good idea.Looking forward to its release.
R.Sriranjan
On Tue, May 11, 2010 at 1:26 PM, Dr. H. Nikolaus Schaller
h...@computer.orgwrote:
I don't know why it's usefull, sorry for the question. If you can
kudos!
2010/5/11 Dr. H. Nikolaus Schaller h...@computer.org
Am 11.05.2010 um 17:50 schrieb Michael Trimarchi:
Hi,
RANJAN wrote:
A really good idea.Looking forward to its release.
R.Sriranjan
On Tue, May 11, 2010 at 1:26 PM, Dr. H. Nikolaus Schaller
h...@computer.orgwrote:
Am 11.05.2010 um 19:02 schrieb Michael Trimarchi:
Hi,
Dr. H. Nikolaus Schaller wrote:
Am 11.05.2010 um 17:50 schrieb Michael Trimarchi:
Hi,
RANJAN wrote:
A really good idea.Looking forward to its release.
R.Sriranjan
On Tue, May 11, 2010 at 1:26 PM, Dr. H. Nikolaus Schaller
23 matches
Mail list logo
