Benedikt Schindler wrote:
Hi,
some corrections on my own mail.
first off all it works now for me.
second, it's not an update that causes the problem it is not to
update... :)
the whole howto on freeyourphone.de is written for the
Om2007.2/ASU-buildhost version.
2008/8/12 xaos x [EMAIL PROTECTED]:
I actually finally got it working by using the article from freeyourphone
that uses the multiplexing package.
http://freeyourphone.de/portal_v1/viewtopic.php?f=21t=295start=0st=0sk=tsd=asid=dda5c6cbf5850182c786488123f056ce
It will receive calls and make calls while connected to GPRS using this
setup.
-Tom
it is not for an Om2008.8. the only reason why it worked for some people was,
that they used the buildhost feeds again.
(What is absolutly the wrong thing to do ! - But i did it too in the first
time)
So for them it all works fine.
Now i have the correct feeds, and the howto doesn't work anymore.
That is because of a different version of the gsm0710muxd application.
The howto works fine also with Om2008.8.
You just have to install these package before you use the howto from
freeyourphone:
opkg -force-depends install
http://buildhost.openmoko.org/daily-feed/armv4t/gsm0710muxd_0.9.1+gitr1+3ff86b129640b647ccba3d86eb243d864671b039-r0_armv4t.ipk
Attention: just use this package, and no other packages from this host!
This host is normaly not compatible with the Om2008.8 !!!
have a nice time with gprs until the offical gprs is comming up soon.
cu all
Beni
P.S.:
the mokoservice.py doesn't work for me.
i use gprson gprsqison to get into it.
sometimes it doesn't work on the first time, and i have to try it a
litle bit later again.
Benedikt Schindler schrieb:
ok. i found out, that a upgrade from gsm0710mux is the problem.
they now have a different service name for the muxer.
it isn't org.pyneo.muxer anymore it's now org.mobile.mux.
you could edit /etc/X11/Xsession.d/89qtopia so it uses the new term,
(and also the /usr/bin/gprson script)
or add an additional service file to /usr/share/dbus-1/system-services/
--
[EMAIL PROTECTED]:~# cat
/usr/share/dbus-1/system-services/org.pyneo.muxer.service
[D-BUS Service]
Name=org.pyneo.muxer
#Name=org.freesmartphone.GSM.MUX
Exec=/usr/bin/gsm0710muxd
User=root
---
But now i have the problem that i get this errors in my log:
Aug 16 22:26:45 om-gta02 user.notice root: Waiting for pid: 1545
Aug 16 22:26:47 om-gta02 user.notice root: ficgta01hardware plugin
Aug 16 22:26:48 om-gta02 user.notice root: Modem : opening serial
device /dev/ttySAC0 at 115200
Aug 16 22:26:48 om-gta02 user.notice root: Modem : Device:
/dev/ttySAC0 is a tty device: True
Aug 16 22:26:48 om-gta02 user.notice root: Modem : NONBLOCK
successfully reset
Aug 16 22:26:48 om-gta02 user.notice root: Modem : Opened /dev/ttySAC0
Aug 16 22:26:48 om-gta02 user.notice root: Modem : querying multiplexer
plugin ficgta01multiplex
Aug 16 22:26:48 om-gta02 user.notice root: AtChat : T : ^Z
Aug 16 22:26:58 om-gta02 user.notice root: Mux : *** mux setup timed
out ***
Aug 16 22:26:58 om-gta02 user.notice root: AtChat : T : ^Z
[last two lines repeat until a exit of the programm]
I think the T should be an AT. so i try some different gsm0710mux
today.
maybe i found something that works.
cu later
[btw: answers from could have some delay, because i am on vacation and
i don't have often internet without my gprs working on the freerunner.]
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Thanks for the tips! It's really great to have gprs working perfectly
on 2008.8. I have no problems running mokoservices.py either.
cheers,
Brad
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community