Hi.
Just for reference, I filed a ticket about this issue :
http://docs.openmoko.org/trac/ticket/1933
Olivier Berger [EMAIL PROTECTED] writes:
Andy Green [EMAIL PROTECTED] writes:
Somebody in the thread at some point said:
| Anyway, it seems it's rather unstable in the first times the
Olivier Berger wrote:
Now, I have found a way to boot to OM 2008.8 from SD (actually VFAT +
EXT3).
But I'm too unable to use network over USB now (works fine if
rebooting to 2007.2 in flash).
Hi,
I've just received my Freerunner yesterday.
FYI,
I'm able to boot to OM 2008.8 from SD
.
discuss.
*From:* [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] *On Behalf Of *Charles
Pax
*Sent:* Friday, August 08, 2008 12:24 PM
*To:* List for Openmoko community discussion
*Subject:* Re: Openmoko Om 2008.8 Release
On Wed, 20 Aug 2008 10:12:03 +0200 (CEST)
[EMAIL PROTECTED] wrote:
How could you make distinction about that? Should the client check a
box for saying they are enthusiast?
He said that it would depend on who the Openmoko team thinks is the
target group.
I'd +1 the ship FR without any images
:[EMAIL PROTECTED] *On Behalf Of *Charles Pax
*Sent:* Friday, August 08, 2008 12:24 PM
*To:* List for Openmoko community discussion
*Subject:* Re: Openmoko Om 2008.8 Release
Will this be shipping with the next batch of Freerunners?
-Charles
*Sent:* Friday, August 08, 2008 12:24 PM
*To:* List for Openmoko community discussion
*Subject:* Re: Openmoko Om 2008.8 Release
Will this be shipping with the next batch of Freerunners?
-Charles
Von: Marc Bantle [EMAIL PROTECTED]
Wolfgang Spraul wrote:
1. how many people want this?
+1
+1
2. does anyone in the community step up and compile the distribution
for GTA01? (there will be some work: size reduction, GPS chip, etc)
I'd be fine with a tar.gz - image to put on
On Fri, Aug 8, 2008 at 4:48 AM, Wolfgang Spraul [EMAIL PROTECTED] wrote:
For GTA01, we have no big plan yet but we will look at it next. The
biggest problem that stops us is that we are extremely low on GTA01
phones :-)
I am only aware of 1 (ONE) functioning GTA01 in the Taipei office. A
bit
Wolfgang Spraul wrote:
1. how many people want this?
+1
2. does anyone in the community step up and compile the distribution
for GTA01? (there will be some work: size reduction, GPS chip, etc)
I'd be fine with a tar.gz - image to put on SD-card. So
size reduction is not necessarily an
I'd be fine with a tar.gz - image to put on SD-card. So
size reduction is not necessarily an issue. Actually I'd
rather have the complete 2008.08 suite.
How are other GTA01 users thinc about that?
Marc
I like the idea too .. and I'm perfectly content with booting my
neo1973 from SD card
On Tue, Aug 12, 2008 at 1:54 PM, Jay Vaughan [EMAIL PROTECTED] wrote:
(re GTA01)
I'd be fine with a tar.gz - image to put on SD-card. So
I like the idea too .. and I'm perfectly content with booting my
neo1973 from SD card ..
+1
clare
___
, 2008 12:24 PM
*To:* List for Openmoko community discussion
*Subject:* Re: Openmoko Om 2008.8 Release
Will this be shipping with the next batch of Freerunners?
-Charles
Ship with nothing and everyone put what want
So nobody can say it is not a complete software :)
Ship with *all* available distributions on the *SD Card*, and include
a script that lets you copy your desired distribution to flash once
you've checked them all out ..
;
--
Jay Vaughan
On Mon, Aug 11, 2008 at 9:33 AM, Jay Vaughan [EMAIL PROTECTED] wrote:
Ship with nothing and everyone put what want
So nobody can say it is not a complete software :)
Ship with *all* available distributions on the *SD Card*, and include
a script that lets you copy your desired distribution
steve wrote:
Good question.
Here are the options.
1. Ship with 2007.2. Basicaly a dialer that works. bare bones phone.
2. Ship with Qtopia. A solid full featured smart phone.
3. Ship with OM2008.8 An alpha release of our future phone.
4. Ship bare metal and let the users choose.
Why
I'm curious about this theme of yours.
-Steven
On Sun, Aug 10, 2008 at 10:30 PM, Jeremiah Flerchinger
[EMAIL PROTECTED] wrote:
I would
suggest changing the gtk theme to something that doesn't mess up
visibility of rendering like it has and matches the rest of the theme
better (I have a theme
I guess it's pretty flaky :( But still I see some (slow) progress ;)
It really could be related to the USB ports on your PC .. if for some
reason your PC is not happy with the power-state changes demanded by
the Freerunner, then it will reset the USB hard layer, and this has
the effect
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| I kept trying, rebooted, tested, again, again, unplugged USB,
| replugged... and TADA, at some point it magically worked !
|
| I've typed-in a few commands, got networking (opkg update completed),
| did a
Jay Vaughan [EMAIL PROTECTED] writes:
I guess it's pretty flaky :( But still I see some (slow) progress ;)
It really could be related to the USB ports on your PC .. if for some
reason your PC is not happy with the power-state changes demanded by
the Freerunner, then it will reset the
Andy Green [EMAIL PROTECTED] writes:
Somebody in the thread at some point said:
| I kept trying, rebooted, tested, again, again, unplugged USB,
| replugged... and TADA, at some point it magically worked !
|
| I've typed-in a few commands, got networking (opkg update completed),
| did a few
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| Anyway, it seems it's rather unstable in the first times the system is
| brought up, and stabilizes after a while.
| If I unplug the USB cable when I lose IP connectivity, and replug
| after 1/2 seconds,
Andy Green [EMAIL PROTECTED] writes:
Somebody in the thread at some point said:
| Anyway, it seems it's rather unstable in the first times the system is
| brought up, and stabilizes after a while.
| If I unplug the USB cable when I lose IP connectivity, and replug
| after 1/2 seconds, then
PROTECTED] On Behalf Of Charles Pax
Sent: Friday, August 08, 2008 12:24 PM
To: List for Openmoko community discussion
Subject: Re: Openmoko Om 2008.8 Release
Will this be shipping with the next batch of Freerunners?
-Charles
___
Openmoko community mailing
Pax
Sent: Friday, August 08, 2008 12:24 PM
To: List for Openmoko community discussion
Subject: Re: Openmoko Om 2008.8 Release
Will this be shipping with the next batch of Freerunners?
-Charles
___
Openmoko community mailing list
community
On Sun, 2008-08-10 at 19:53 -0700, steve wrote:
Good question.
Here are the options.
1. Ship with 2007.2. Basicaly a dialer that works. bare bones phone.
2. Ship with Qtopia. A solid full featured smart phone.
3. Ship with OM2008.8 An alpha release of our future phone.
What are the
On Mon, Aug 11, 2008 at 8:23 AM, steve [EMAIL PROTECTED] wrote:
Good question.
Here are the options.
1. Ship with 2007.2. Basicaly a dialer that works. bare bones phone.
2. Ship with Qtopia. A solid full featured smart phone.
3. Ship with OM2008.8 An alpha release of our future phone.
Noah Romer wrote:
William Lai wrote, On 08/08/08 04:03:
http://downloads.openmoko.org/releases/Om2008.8/Om2008.8.uImage.bin
Is this not the u-boot image? I thought it was and tried to flash it
using `dfu-util -a u-boot -R -D Om2008.8.uImage.bin`, but that failed
uImage is the kernel. You
Hi Noah,
No, It's kernel image.
If you indeed reflash u-boot with kernel image.
I think you will need a debug board.
Regard,
Tick
On Fri, Aug 08, 2008 at 10:19:51PM -0700, Noah Romer wrote:
William Lai wrote, On 08/08/08 04:03:
Martin Šenkeřík [EMAIL PROTECTED] writes:
Maybe can help reflashing your u-boot with some actual version...
Thanks for the suggestion.
Haven't tried that, but instead, I changed u-boot env to add a new
menu entry including init=/sbin/init.
It went a bit further this time : kernel boots and I
On Sat, Aug 9, 2008 at 11:00 AM, Tick Chen [EMAIL PROTECTED] wrote:
Hi Noah,
No, It's kernel image.
If you indeed reflash u-boot with kernel image.
I think you will need a debug board.
Regard,
Tick
Or just boot into NOR U-boot nand erase u-boot and flash a new U-boot in
using
On Sat, Aug 9, 2008 at 8:11 AM, Olivier Berger [EMAIL PROTECTED] wrote:
Anyone succeeded in booting the new image from (micro)SD ?
Yes, I do.
Initially, I had a running Qtopia on the said microsd (small vfat
partition with uImage.bin, big ext2 one with rootfs expanded on it,
the normal way if
On Sat, Aug 9, 2008 at 8:11 AM, Olivier Berger [EMAIL PROTECTED] wrote:
Anyone succeeded in booting the new image from (micro)SD ?
I did too. I replaced my ASU image on a third ext3 partition on my SD card.
(format partition, copy tar file in /tmp, untar 2008.8 rootfs into partition)
Olivier Berger [EMAIL PROTECTED] writes:
I changed u-boot env to add a new
menu entry including init=/sbin/init.
It went a bit further this time : kernel boots and I can see the
booting splash screen (with boots and progress bar), although the X
server wasn't started, I guess : I get a
Oh Sorry,
Yes you are right, there is an Nor uboot for this case.
Thanks for correct me.
Cheers,
Tick
On Sat, Aug 09, 2008 at 11:41:25AM +0530, rakshat hooja wrote:
On Sat, Aug 9, 2008 at 11:00 AM, Tick Chen [EMAIL PROTECTED] wrote:
Hi Noah,
No, It's kernel image.
If you
[snip: me not paying attention and all sorts of folks being helpfull]
Ah. It's much happier now. Thanks.
--
Noah Romer | Knowledge is power.
[EMAIL PROTECTED] |
PGP key available | Power corrupts.
by finger or email |
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| On Sat, Aug 9, 2008 at 8:11 AM, Olivier Berger [EMAIL PROTECTED]
wrote:
|
| Anyone succeeded in booting the new image from (micro)SD ?
|
| I did too. I replaced my ASU image on a third ext3 partition on my
Andy Green [EMAIL PROTECTED] writes:
Somebody in the thread at some point said:
|
| But the first few boots I could not have USB networking working -at
| all-. Now it works, but I don't really know what was wrong.
If you updated your U-Boot partway through your testing, for a while we
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| Now, I have found a way to boot to OM 2008.8 from SD (actually VFAT +
| EXT3).
|
| But I'm too unable to use network over USB now (works fine if
| rebooting to 2007.2 in flash).
|
| lsusb reports :
| Bus
Olivier Berger [EMAIL PROTECTED] writes:
Andy Green [EMAIL PROTECTED] writes:
Somebody in the thread at some point said:
|
| But the first few boots I could not have USB networking working -at
| all-. Now it works, but I don't really know what was wrong.
If you updated your U-Boot
William Lai wrote:
http://downloads.openmoko.org/releases/Om2008.8/Om2008.8.rootfs.jffs2
http://downloads.openmoko.org/releases/Om2008.8/Om2008.8.uImage.bin
One should note that these images are most likely only working with
freerunners.
At least this is what i think after looking at the file
Congratulations to Openmoko and every one involved, Great Job!
I am in office today just for your email (fast internet).
you have made my day.
-GK
___
Openmoko community mailing list
community@lists.openmoko.org
Maybe I should add that the binary Om 2008.8 release is for GTA02 only
right now.
For GTA01, we have no big plan yet but we will look at it next. The
biggest problem that stops us is that we are extremely low on GTA01
phones :-)
I am only aware of 1 (ONE) functioning GTA01 in the Taipei
Le vendredi 08 août 2008 à 19:48 +0800, Wolfgang Spraul a écrit :
Maybe I should add that the binary Om 2008.8 release is for GTA02 only
right now.
For GTA01, we have no big plan yet but we will look at it next. The
biggest problem that stops us is that we are extremely low on GTA01
hi there,
leo.studer wrote:
Just installed, I must be stupid because I can't see how to shift the
keyboard towards figures, so actually I can't enter my SIM pin... that's
strange, I must have missed something obvious...
Ganesha Krishna wrote:
Congratulations to Openmoko and every
Wolfgang Spraul wrote:
Maybe I should add that the binary Om 2008.8 release is for GTA02 only
right now.
Thank you for clearing that.
1. how many people want this?
Me :)
3. can we support or do that from Taipei, do we find enough working
GTA01?
I would happyly exchange mine for a
On Fri, Aug 8, 2008 at 5:35 PM, Sugacapra [EMAIL PROTECTED] wrote:
hi there,
leo.studer wrote:
Just installed, I must be stupid because I can't see how to shift the
keyboard towards figures, so actually I can't enter my SIM pin... that's
strange, I must have missed something
The same. I was waiting for this day thinking that it will be also
version for GTA01.
Alexandre Ghisoli wrote:
Le vendredi 08 août 2008 à 19:48 +0800, Wolfgang Spraul a écrit :
Maybe I should add that the binary Om 2008.8 release is for GTA02 only
right now.
For GTA01, we have
[quote]
Try flicking the keyboard up (sliding your finger up quickly in the
keyboard)
rakshat
[/quote]
whoa! thanks a lot and outstanding !
is the first h effect i see truly on my FR :D
--
View this message in context:
http://n2.nabble.com/Openmoko-Om-2008.8-Release-tp680370p680457.html
a tar.gz file would be very useful for booting from SD card...
On Fri, Aug 8, 2008 at 2:18 PM, Sugacapra [EMAIL PROTECTED] wrote:
[quote]
Try flicking the keyboard up (sliding your finger up quickly in the
keyboard)
rakshat
[/quote]
whoa! thanks a lot and outstanding !
is the first
whoa! thanks a lot and outstanding !
is the first h effect i see truly on my FR :D
I like this image so far, it's starting to feel like a real operating
system - a*HUGE* thanks from me to everyone involved. Two questions
though, related to h effects:
1) Is this the first
On Fri, 2008-08-08 at 19:03 +0800, William Lai wrote:
Dear Community,
We are proud to announce the release of Om 2008.8 for public reviewing.
It represents our current state of development over the last 6 months.
We came a long way before achieving this milestone.
YAA HOO!
snip
Soon
Yorick Moko [EMAIL PROTECTED] writes:
a tar.gz file would be very useful for booting from SD card...
I guess you may convert the contents of the JFFS2 to a tarball by
following bits explained here :
http://maemo.org/community/wiki/ModifyingRootImage/
In particular somthing like this on a
Olivier Berger [EMAIL PROTECTED] writes:
Yorick Moko [EMAIL PROTECTED] writes:
a tar.gz file would be very useful for booting from SD card...
I guess you may convert the contents of the JFFS2 to a tarball by
following bits explained here :
Maybe can help reflashing your u-boot with some actual version...
On Fri, Aug 8, 2008 at 4:04 PM, Olivier Berger [EMAIL PROTECTED] wrote:
Olivier Berger [EMAIL PROTECTED] writes:
Yorick Moko [EMAIL PROTECTED] writes:
a tar.gz file would be very useful for booting from SD card...
I guess
I just change from FSO to OM 2008.8 and I think keyboard is not good as in
FSO. I mean, i need full-qwerty-with enter and backspace and arrows.
Keyboard layout switching with sliding works great. Backspacing with sliding
is cool but I think there should be button too.
I installed illume-conf, why
On Fri, Aug 08, 2008 at 02:27:41PM +0200, Yorick Moko wrote:
a tar.gz file would be very useful for booting from SD card...
Hi,
I put the tar.gz file and hopes it helps :-)
http://downloads.openmoko.org/releases/Om2008.8/Om2008.8.rootfs.tar.gz
by the way, is uboot
Hi,
by the way, is uboot file necessary ?
I think it would be nice to have everything in one place. :-)
Marek
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
On Friday 08 August 2008 13:03:32 William Lai wrote:
Dear Community,
We are proud to announce the release of Om 2008.8 for public reviewing.
It represents our current state of development over the last 6 months.
We came a long way before achieving this milestone.
Here is what you can expect:
Thanks for the update but its got a few issues.
For starters why was the terminal removed from the default image?
This is a beta linux device, there are a ton of time having a terminal
is a good thing. And I'm not always someplace I can plug it in.
Second, whats with the constant run to
Will this be shipping with the next batch of Freerunners?
-Charles
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
People, please don't forget Neo 1993!
+1 from me .. i have two neo's, one of them is broken, and i -still-
hang on to hope that they will be useful somehow ..
;
--
Jay Vaughan
___
Openmoko community mailing list
community@lists.openmoko.org
a tar.gz file would be very useful for booting from SD card...
yeah in fact i would favour a less dfu-util'y approach to these public
releases, and say .. make the boot-from-SD the norm, rather than an
exception, leaving dfu-.. for 'factory default boot config'.
;
--
Jay Vaughan
William Lai wrote, On 08/08/08 04:03:
http://downloads.openmoko.org/releases/Om2008.8/Om2008.8.uImage.bin
Is this not the u-boot image? I thought it was and tried to flash it
using `dfu-util -a u-boot -R -D Om2008.8.uImage.bin`, but that failed
and on the screen of my Freerunner, it says, End of
uImage is the kernel not uBoot.
dfu-util -a kernel -R -D Om2008.8.uImage.bin
-Nick
Noah Romer wrote:
using `dfu-util -a u-boot -R -D Om2008.8.uImage.bin`, but that failed
and on the screen of my Freerunner, it says, End of write exceeds
partition end. Should I just re-flash the 2007.2 u-boot
2008/8/8 Noah Romer [EMAIL PROTECTED]:
William Lai wrote, On 08/08/08 04:03:
http://downloads.openmoko.org/releases/Om2008.8/Om2008.8.uImage.bin
Is this not the u-boot image? I thought it was and tried to flash it
using `dfu-util -a u-boot -R -D Om2008.8.uImage.bin`, but that failed
and on
On Sat, Aug 9, 2008 at 10:49 AM, Noah Romer [EMAIL PROTECTED] wrote:
William Lai wrote, On 08/08/08 04:03:
http://downloads.openmoko.org/releases/Om2008.8/Om2008.8.uImage.bin
Is this not the u-boot image? I thought it was and tried to flash it
Thats the kernel.
Rakshat
66 matches
Mail list logo