FSO and g_ether as module [Was: Re: usb mass media storage]

On Fri, Sep 05, 2008 at 01:11:30PM +0800, Andy Green wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > Somebody in the thread at some point said: > > | Where did you get that kernel image? I haven't been able to find it > | anywhere. Is there any other way to get those commands? > > A

Re: usb mass media storage

[EMAIL PROTECTED] wrote: >> The host has direct access to the block device, so it is important >> that /dev/mmcblk0p1 is not mounted on both the phone and the host at >> the same time (unless it's mounted ro on both). > > What if it was mounted ro on the phone side and rw on the host side? Would

Re: usb mass media storage

arne anka wrote: > try to put your echo strings in quotes: > > echo -n "ifdown usb0..." > did that, no luck. this time is froze after echoing "ifdown usb0..." ...? -D ___ Openmoko community mailing list community@lists.openmoko.org http://lists.op

Re: usb mass media storage

On Fri, Sep 05, 2008 at 01:04:52PM +0200, pHilipp Zabel wrote: > On Fri, Sep 5, 2008 at 4:41 AM, Dale Maggee <[EMAIL PROTECTED]> wrote: > > Petr Vanek wrote: > >> I have spent a while googling this up and have no wiki skills but > >> someone might find this useful: > >> > >> to make FR act as a mem

Re: usb mass media storage

try to put your echo strings in quotes: echo -n "ifdown usb0..." ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community

Re: usb mass media storage

Christian Adams wrote: > moinmoin > > there is no "must" for using /dev/mmc* .. you could also use a plain > file: > > preparations: > > create mem_stick.fs file > dd if=/dev/zero of=mem_stick.fs bs=512 count=1048576 # for a 512mb > "memory-stick" with blocksize=512 bytes > > create filesystem

Re: usb mass media storage

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 moinmoin there is no "must" for using /dev/mmc* .. you could also use a plain file: preparations: create mem_stick.fs file dd if=/dev/zero of=mem_stick.fs bs=512 count=1048576 # for a 512mb "memory-stick" with blocksize=512 bytes create filesys

Re: usb mass media storage

On Fri, Sep 5, 2008 at 4:41 AM, Dale Maggee <[EMAIL PROTECTED]> wrote: > Petr Vanek wrote: >> I have spent a while googling this up and have no wiki skills but >> someone might find this useful: >> >> to make FR act as a memory stick, here is what my script does: >> >> >> #!/bin/sh >> /etc/init.d/n

Re: usb mass media storage

Petr Vanek wrote: > I have spent a while googling this up and have no wiki skills but > someone might find this useful: > > to make FR act as a memory stick, here is what my script does: > > > #!/bin/sh >

Re: usb mass media storage

1. This only works until reboot or manually reverting it. 2. Don't know, maybe. :) 3. /dev/mmcblk0p1 is the first partition on the sd card. So the "usb stick" will only show this one partition and nothing more. Ciao, Rainer Dale Maggee wrote: > Petr Vanek wrote: >> I have spent a while goo

Re: usb mass media storage

Petr Vanek wrote: > I have spent a while googling this up and have no wiki skills but > someone might find this useful: > > to make FR act as a memory stick, here is what my script does: > > > #!/bin/sh >

Re: usb mass media storage

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Somebody in the thread at some point said: | Where did you get that kernel image? I haven't been able to find it | anywhere. Is there any other way to get those commands? Any recent kernel package should have these modules. Word of warning though, U

Re: usb mass media storage

Petr Vanek wrote: > > On Wed, 3 Sep 2008 00:22:38 +0200 > "Adrien de Sentenac" <[EMAIL PROTECTED]> > (ADS) wrote: > >>2008/9/2 Petr Vanek <[EMAIL PROTECTED]> >> >>> rmmod g_ether >>> modprobe g_file_storage file=/dev/mmcblk0p1 >> >> >>which kernel/distribution do you use ? >>it seems I have ne

Re: usb mass media storage

On Wed, 3 Sep 2008 00:22:38 +0200 "Adrien de Sentenac" <[EMAIL PROTECTED]> (ADS) wrote: >2008/9/2 Petr Vanek <[EMAIL PROTECTED]> > >> rmmod g_ether >> modprobe g_file_storage file=/dev/mmcblk0p1 > > >which kernel/distribution do you use ? >it seems I have neither of these modules with om2008.8 (wi

Re: usb mass media storage

Adrien de Sentenac wrote: > 2008/9/2 Petr Vanek <[EMAIL PROTECTED] > > > > rmmod g_ether > modprobe g_file_storage file=/dev/mmcblk0p1 > > > which kernel/distribution do you use ? > it seems I have neither of these modules with om2008.8 (with updates). I figu

Re: usb mass media storage

2008/9/2 Petr Vanek <[EMAIL PROTECTED]> > rmmod g_ether > modprobe g_file_storage file=/dev/mmcblk0p1 which kernel/distribution do you use ? it seems I have neither of these modules with om2008.8 (with updates). ___ Openmoko community mailing list comm

Re: usb mass media storage

On Tuesday 02 September 2008, Daniel Benoy wrote: > You may want to use 'ifdown usb0' instead of '/etc/init.d/networking stop', > in case you want to keep your wifi connection going. > > That's cool though :) I wonder if it's possible to pretend to be a USB > hub, providing both g_ether and g_file

Re: usb mass media storage

You may want to use 'ifdown usb0' instead of '/etc/init.d/networking stop', in case you want to keep your wifi connection going. That's cool though :) I wonder if it's possible to pretend to be a USB hub, providing both g_ether and g_file_storage On Tuesday 02 September 2008 15:47:18 Petr Vane