Having done both Geological and Astronomical field work the one thing I
can suggest, and you may have already thought of this, is to test
everything out. Assemble the equipment, set it all up as if you were in
the field and see:
how long does the system run before the battery is exhausted
You compacters everywhere:
A week or so ago, our Mark Falzon [EMAIL PROTECTED] asked:
I would like to run the computer's (SE/30s) from a deep cycle marine
battery connected to a DC to AC power inverter. Will this work? Anyone
have any idea how long the battery will last?
It'll work fine. The
At 12:04 PM -0400 8/7/2003, Mark Falzon wrote:
I need to run a PASCO SCSI interface on the computer. This device uses many
different probes (4 digital and 3 analog) so I can measure temperature, pH,
dissolved O2, etc. It is AC powered. I could use a 520c powerbook, but I
would still have to
if at all possible, you'd be way ahead using an old laptop like a duo or
something, in the case of a duo there are a lot of small docks available to add
ports. if that won't work, and you're into electronics the best thing to do is
build a power supply for the se/30 to run directly off the
I need to run a PASCO SCSI interface on the computer. This device uses many
different probes (4 digital and 3 analog) so I can measure temperature, pH,
dissolved O2, etc. It is AC powered. I could use a 520c powerbook, but I
would still have to power the interface. I'm thinking the most
I've seen power adaptors that hook into a car lighter that converts the power
for a three-prong plug. I haven't seen it in use. Is there a similar port
to a car lighter where you will be?
David Harris
[EMAIL PROTECTED]
--
Compact Macs is sponsored by http://lowendmac.com/.
Support
I have 2 SE-30's. I would like to use these with a PASCO interface box to
collect field data for my chemistry classes. I will be using Science
Workshop 2.3.3 on the SE-30's. I would like to run the computer's from a
deep cycle marine battery connected to a DC to AC power inverter. Will this
My Reply follows quote. On 30/07/2003 06:20 [EMAIL PROTECTED]
said:
I have 2 SE-30's. I would like to use these with a PASCO interface box to
collect field data for my chemistry classes. I will be using Science
Workshop 2.3.3 on the SE-30's. I would like to run the computer's from a
deep
How many watts does the SE/30 use?
Ken
I measured 45 watts. with 8 MB RAM and empty PDS slot.
Gamba
http://home.earthlink.net/~gamba2
--
Compact Macs is sponsored by http://lowendmac.com/.
Support Low End Mac http://lowendmac.com/lists/support.html
Compact Macs list info:
