Adam Williamson [EMAIL PROTECTED] writes:
After decades of war one company, who had gained powerful
supplying both sides with weaponary, steps forwards and
crushes both warring factions in one swift movement.
Using far superior weaponary and AI craft, the company
was completely
Robert Fox [EMAIL PROTECTED] writes:
I apologize - my mistake - ProFTPd was down on the host machine
which has Cooker locally.
Hum, you haven't even looked at FTP server logs? :/
This was my own problem and NOT a broken boot image!!
Yep.
--
Guillaume Cottenceau -
David Walser [EMAIL PROTECTED] writes:
If you didn't, please remove this rpmlint error:
init-script-without-chkconfig-postin
it's been discovered that not having the chkconfig-postin is the best way to have a
service not set to start automatically upon installation (I discovered, Pixel
On Wed, 5 Aug 2003, Robert Fox wrote:
2) On normal kernel bootup - also under VMware, the network card does
load the module, but dhcp doesn't activate during boot. I have to
manually type in dhclient from a root console for it to get an IP
address. Is there something wrong with the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Liam Quin wrote:
| [EMAIL PROTECTED] /]# urpmi gaim
| Some package requested cannot be installed:
| gaim-0.64-3mdk.i586 (due to unsatisfied perl-base[== 2:5.8.0]) (Y/n)
| Everything already installed
Yes, everybody is waiting for Laurent to rebuild it
On Tue, 2003-08-05 at 12:06, Guillaume Cottenceau wrote:
Robert Fox [EMAIL PROTECTED] writes:
Just tried a new install over my local network to a Rsync'd local copy
of Cooker.
After the DHCP of the network card - I enter the IP and logon info for
the other host - but when I hit OK -
Leon Brooks [EMAIL PROTECTED] writes:
On Wed, 6 Aug 2003 00:50, Guillaume Cottenceau wrote:
It's much work, I think.
How about opening all R/O files from the RAMdisk memory-mapped, so only
wasting the memory once?
All significant files are opened from within perl. It's possible
than perl
Abel Cheung [EMAIL PROTECTED] writes:
On 2003-08-04(Mon) 15:07:28 +0200, Pixel wrote:
Per Øyvind Karlsen [EMAIL PROTECTED] writes:
- don't use overuse wildcards in %files list
[...]
hum, as for me, i really prefer using many wildcards.
However that also contributes to
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Guillaume Rousse wrote:
Ainsi parlait AAW :
The line:
%{__cputoolize: %{__cputoolize}}
should be
%if %buildfor9_2
%{__cputoolize: %{__cputoolize}}
%endif
A more generic fix may be:
%{?__cputoolize:
Jay DeKing [EMAIL PROTECTED] writes:
Now let's not let this happen again ;-p
For that we'd need to throw titi (tvignaud) to jail :).
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
Warly wrote:
Yes, I think that I will likely add one static image for the very
first part of the boot with some message in the image such as
Booting, please wait and switch to the translated version whenever
the / is available.
I'd also vote for retaining the progress bar even after F2 is
Fresh Cooker install - tried Gnome and it works but the initial splash
screen stays up for a long time (like two minutes) then disappears.
What causes this?
Thx,
R.Fox
--
Robert Fox [EMAIL PROTECTED]
Fox Consulting Services
Frederic Soulier [EMAIL PROTECTED] writes:
I know time is precious but if I want to test the fix how do I know if
I'm using the right package where the fix is applied if I do not have
the information...
Agreed. Personally, I always state in which version the fix is
done.
--
Guillaume
On Tue, 5 Aug 2003 05:58, Robert Fox wrote:
Just tried a new install over my local network to a Rsync'd local
copy of Cooker.
After the DHCP of the network card - I enter the IP and logon info
for the other host - but when I hit OK - it fails with:
Error: failed to connect to remote host
Launching gnomemeeting:
Entity 'ns_graphs' not defined
Entity 'ns_graphs' not defined
** (gnomemeeting:25507): WARNING **: FIXME: guard from double entry
Segmentation fault
M. Ignacio Monge Garca
Residente de Medicina Intensiva
Hospital de Jerez de la Frontera (Espaa)
On Monday 04 August 2003 5:29 pm, Guillaume Cottenceau honored me with this
communique:
Pascal Cavy [EMAIL PROTECTED] writes:
Select one package on updates opens the new package list
select a package then another one unselects the previously selected
... etc...
thanks for the
Have you tried to update the BIOSes on those guys? ACPI is the replacement
for APM.
BIOS updates don't appear very common for `older' laptops. After all they
would much rather you bought a new one. The last BIOS update for my Inspiron
7000 was about 2 years ago. I modded the processor, RAM
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
OS wrote:
On Tuesday 05 Aug 2003 6:10 pm, Buchan Milne wrote:
Only other feature I would be interested in is support for creating
hibernating partitions in diskdrake.
Can't this be done with fdisk ???
One aspect (creating a partition of type A0 -
Ainsi parlait Gerald Drouillard :
David Guntner wrote:
Hi,
I installed the rpm (removed the old one, including removing
/var/lib/mailman just to make sure everything was clean. I created a
mailman mailing list as per the instructions that the rpm gave me (I.E.,
bin/newlist mailman)
http://qa.mandrakesoft.com/show_bug.cgi?id=4495
Product: Installation
Component: Installation
Summary: basesystem package not selected
Product: Installation
Version: 1.813
Platform: PC
OS/Version: All
Status:
I guess this should be better directed to rpm-devel mailing list, however i
just discovered on paris mongueus mailing-list there was a Perl module for
scanning dependencies available from CPAN:
http://search.cpan.org/author/AUTRIJUS/Module-ScanDeps-0.21/ScanDeps.pm
Maybe it could be more robust
On Tuesday 05 August 2003 02:38, Ben Reser wrote:
On Mon, Aug 04, 2003 at 07:47:00PM -0400, David Walser wrote:
Ben Reser wrote:
Perms on any file in /etc/rc.d/init.d should be 0700. rpmlint
should test for this.
What!? Why?
My intention is for rpmlint to make sure they are
sent bug report to kde
http://bugs.kde.org/show_bug.cgi?id=60117
I've made a qickfix that fixes this annoying bug. If you don't want to
wait for the kde guys really fixing the bug, I suggest inclusion of this
patch in kdenetwork.
However, In the bug report I told the kde developers that I'd
Le Saturday 02 August 2003 11:15, M. Ignacio Monge a écrit :
I suspect that kdelibs in MDK hasn't XCF format support. Thumbnails
doesn't display and apps that use kdelibs t display directory iamges as
Gwenview crashes when loading directories contaning XCF files.
What is this format ?
Thanks! I will test ASAP.
Since most of this discussion was around post install for laptops, maybe a
laptop config wizard post install or a Drak tool for laptops? Another slick
thing to have would be modules and mappings for Multimedia keys and sound
buttons. Could the tool take care of that as
On 2003-08-04(Mon) 17:38:08 -0700, Ben Reser wrote:
Perms on any file in /etc/rc.d/init.d should be 0700. rpmlint should
test for this.
What!? Why?
Not a bad suggestion, considering the fact that startup scripts should
only run by root...
Abel
My intention is for rpmlint to make
first of all have you installed cooker version or compiled from
sources?
module-init-tools was installed already.
if you *installed* current module-init-tools (as opposed to
updating it) /etc/modprobe.conf is generated automatically.
Otherwise I suggest removing module-init-tools, removing
On 2003.08.06 13:23, Abel Cheung wrote:
Huh, I was promising too much, without checking things clearly. I have
no right to upload to cooker. But I have the packages ready though.
Who
can help me uploading gaim to cooker?
You can email it to me.
Austin
From: Guillaume Cottenceau [EMAIL PROTECTED]
Robert Fox [EMAIL PROTECTED] writes:
On Tue, 2003-08-05 at 15:12, Guillaume Cottenceau wrote:
Something has changed on the boot disk image since then!
Yes we now use 2.4.21-6mdkBOOT, we used the 9.1 one for ages
(think Ron Stodden's
On Tue, 5 Aug 2003 14:07, Dave Cotton wrote:
I joined a company 20 years ago who had totally solved the diverse
permission problems on the Altos unix machines they supplied to
customers to run their software. They had a shell script that did
chmod 777 on everything, solved the problem,
Le Wednesday 06 August 2003 18:00, AAW a écrit :
Line 138 or arts.spec reads:
Provides: libarts-devel2 = %{epoch_arts}:%version-%release
Is the 2 after devel a typo?
Arn
oops :(((
I will fix it
Regards.
On Tue Aug 05 12:54 +0200, Buchan Milne wrote:
FACORAT Fabrice wrote:
Le mar 05/08/2003 à 02:41, Leon Brooks a écrit :
On Mon, 4 Aug 2003 19:29, Buchan Milne wrote:
You see, instead of making it easy for a user to log in as
root to do tasks, we must remove the necessity for them to do
On 08.06, J.A. Magallon wrote:
On 08.06, Guillaume Rousse wrote:
Ainsi parlait Levi Ramsey :
On Wed Aug 06 20:00 +0200, François Pons wrote:
* Wed Aug 06 2003 Fran?ois Pons [EMAIL PROTECTED] 0.93-1mdk
- added URPM::Signature for handling armored gpg file and
internal rpm
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have seen this a few times before, but I was just trying davedap (I
was wanting to steal some php code to show jpegPhoto attributes from
ldap in a web page, and davedap does - but it's quite cool, I might
package it), and I had to remove all the
On 08/06/2003 04:14:58 PM, [EMAIL PROTECTED] wrote:
Surprised i see no-one else about this, but RH provides a src.rpm for
the
eclipse IDE build with gcj. I think we can put it in contribs (or
main?)
as well?
Someone feels up to it?
Hmmm, can't find it.
Do you have a link for this?
I'm doing eric
[EMAIL PROTECTED] writes:
check /boot/kernel.h, does it say you are running enterprise?
probably not i think since /etc/init.d/kheader uses:
k=$(uname -r|sed 's/.*mdk//')
to determine enterprise, secure, smp, etc.
since thomas uses tmb instead of mdk this probably fails?
Ofcourse, I hadd
http://qa.mandrakesoft.com/show_bug.cgi?id=4496
--- Additional Comments From [EMAIL PROTECTED] 2003-06-08 00:53 ---
Sure, but sometimes you need to come back because you are blocked. For example,
I first tryed to update my 9.1, but it failed (see bug 4495), so I decided to
try to
[fgriffin] [EMAIL PROTECTED] writes:
This assumes that drakxservices is capable of enabling or disabling xinted
services. If it isn't, then instead of enable/disable buttons, there should
just be a label or something that says starts when requested.
ok done
thanks!
@resolution=fixed
http://qa.mandrakesoft.com/show_bug.cgi?id=4496
--- Additional Comments From [EMAIL PROTECTED] 2003-05-08 20:07 ---
you can change choices made during the installation process when you reach the
Summary screen. This needs to be made more obvious somehow, however...
--
Configure
http://qa.mandrakesoft.com/show_bug.cgi?id=4432
[EMAIL PROTECTED] changed:
What|Removed |Added
Status|UNCONFIRMED |RESOLVED
Resolution|
Ainsi parlait Ben Reser :
Perms on any file in /etc/rc.d/init.d should be 0700. rpmlint should
test for this.
Same goes for other directories as
/etc/X11/xinit.d
/etc/X11/wmsession.d
/etc/profile.d
etc... (basically, all *.d directories in etc)
rpmlint should enforce some basic policy for
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Robert Fox wrote:
Fresh Cooker install - tried Gnome and it works but the initial splash
screen stays up for a long time (like two minutes) then disappears.
What causes this?
I've seen this as well. It's OK the first time (after the firsttime
On Tuesday 05 Aug 2003 6:10 pm, Buchan Milne wrote:
Only other feature I would be interested in is support for creating
hibernating partitions in diskdrake.
Can't this be done with fdisk ???
Owen
On Tuesday 05 August 2003 18:52, Bret Baptist wrote:
Actually there is a forum, just follow the big forums link at the top.
To fix this make sure that you are running your X in 24bit mode.
Bret.
Or have the program(or shellscript) check for it and give a meaningful error
Frank Griffin [EMAIL PROTECTED] writes:
I like the look of the new bootsplash, but there's a slight glitch. If
you use a SCSI disk driver which takes a while to initialize (both
aic7xxx and aic79xx fall into this category, taking 15-30 seconds),
you're left looking at a blank bootsplash with
Quoting \Andrey Borzenkov\ [EMAIL PROTECTED]:
-Original Message-
Quoting Andrey Borzenkov [EMAIL PROTECTED]:
I do not know if it specific in 2.6 or just newer ALSA - but now (in 2.6)
no
/proc/asound/dev is created. It does not matter for devfs case because it
On Tue, 5 Aug 2003, Till Kamppeter wrote:
Please test this version by updating the libgphoto2 package to the
version 2.1.2-0.rc5.1mdk and then using gphoto2, gtkam, flphoto,
and/or digikam.
What's happened to gphoto2?
My digital camera, a Canon Powershot S45, doesn't work anymore
if set in
Ainsi parlait Buchan Milne :
Guillaume Rousse wrote:
Ainsi parlait Ben Reser :
Perms on any file in /etc/rc.d/init.d should be 0700. rpmlint should
test for this.
Same goes for other directories as
/etc/X11/xinit.d
/etc/X11/wmsession.d
/etc/profile.d
etc... (basically, all *.d
From: Andrey Borzenkov [EMAIL PROTECTED]
http://marc.theaimsgroup.com/?l=linux-kernelm=105995833314611w=2
anybody tried it already? Else it sounds really good and is claimed
to work on gf2mx that I have :)
-andrey
Not me ... I can't ... I'm using a 5x BNC cable for my monitor...
As I
Kim Schulz wrote:
[snip]
Use --keep
not an option for my version of urpmi. and when I try to upgrade urpmi,
then I get alot of other deps (especially alot of kde and mozilla
stuff).
I had similar problems on another thread, and the suggestion was to use
--allow-nodeps --allow-force
Hello,
I have a Dell Inspiron 7000 with an aging ATI Rage Mobility Pro. As far as I
know the stock XFree does not support 3D accelleration for the ATI Mobility
range. However those nice people over at RetinalBurn
(http://www.retinalburn.net/linux/dri_xv.html) are working on this and it can
be
lamikr_mdk [EMAIL PROTECTED] writes:
Wow, that was everything I asked! Who ever has made it possible to run same
configuration application both in the console and XFree86 has done smart move.
hail me :)
Have you installed and ran module-init-tools? You will need to run
generate-modprobe.conf /etc/modprobe.conf. This is the 2.6 equivalent to
modules.conf...
Cory
-Original Message-
From: Robert Fox [mailto:[EMAIL PROTECTED]
Sent: Tuesday, August 05, 2003 3:02 PM
To: [EMAIL PROTECTED]
http://qa.mandrakesoft.com/show_bug.cgi?id=4512
Product: kernel
Component: kernel
Summary: kernel oops with audigy
Product: kernel
Version: 2.4.21-6mdk
Platform: PC
OS/Version: All
Status: UNCONFIRMED
http://qa.mandrakesoft.com/show_bug.cgi?id=4498
Product: kdebase
Component: program
Summary: KFind crashes if searching by file contents
Product: kdebase
Version: 3.1.3-8mdk
Platform: PC
OS/Version: All
Status:
http://qa.mandrakesoft.com/show_bug.cgi?id=4515
--- Additional Comments From [EMAIL PROTECTED] 2003-06-08 19:35 ---
This should be filled against gimp and not against gnome2.
The problems lies within the menu commad used for gimp, gimp-remote -n -f, which
does not work for
http://qa.mandrakesoft.com/show_bug.cgi?id=4500
Product: drakconf
Component: program
Summary: configuring time
Product: drakconf
Version: 9.2-0.11mdk
Platform: All
OS/Version: All
Status: UNCONFIRMED
http://qa.mandrakesoft.com/show_bug.cgi?id=4275
--- Additional Comments From [EMAIL PROTECTED] 2003-06-08 15:26 ---
still valid in beta2
--
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
--- You are receiving this mail because: ---
You are on the CC
http://qa.mandrakesoft.com/show_bug.cgi?id=4449
[EMAIL PROTECTED] changed:
What|Removed |Added
CC||[EMAIL PROTECTED]
---
http://qa.mandrakesoft.com/show_bug.cgi?id=4522
Product: drakxtools
Component: printerdrake
Summary: hpoj install fails to start
Product: drakxtools
Version: 9.2-0.27mdk
Platform: PC
OS/Version: All
Status:
http://qa.mandrakesoft.com/show_bug.cgi?id=4512
--- Additional Comments From [EMAIL PROTECTED] 2003-06-08 18:45 ---
PS
the alsa driver works OK thought
--
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
--- You are receiving this mail because: ---
You
http://qa.mandrakesoft.com/show_bug.cgi?id=4506
[EMAIL PROTECTED] changed:
What|Removed |Added
Status|UNCONFIRMED |RESOLVED
Resolution|
http://qa.mandrakesoft.com/show_bug.cgi?id=4509
Product: rpmdrake
Component: program
Summary: bad signature popup needs scrollable display
Product: rpmdrake
Version: 2.1-30mdk
Platform: PC
OS/Version: All
Status:
http://qa.mandrakesoft.com/show_bug.cgi?id=4515
Product: gnome2
Component: gnome2
Summary: problem with menu
Product: gnome2
Version: 2.0.1-1mdk
Platform: PC
OS/Version: All
Status: UNCONFIRMED
Severity:
http://qa.mandrakesoft.com/show_bug.cgi?id=4323
--- Additional Comments From [EMAIL PROTECTED] 2003-07-08 06:15 ---
Bug still valid in LM9.2beta2.
--
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
--- You are receiving this mail because: ---
You are
http://qa.mandrakesoft.com/show_bug.cgi?id=1998
[EMAIL PROTECTED] changed:
What|Removed |Added
Status|UNCONFIRMED |RESOLVED
Resolution|
http://qa.mandrakesoft.com/show_bug.cgi?id=4321
[EMAIL PROTECTED] changed:
What|Removed |Added
Summary|df lists strange filesystem |df lists strange filesystem
http://qa.mandrakesoft.com/show_bug.cgi?id=4488
--- Additional Comments From [EMAIL PROTECTED] 2003-06-08 17:28 ---
Created an attachment (id=582)
-- (http://qa.mandrakesoft.com/attachment.cgi?id=582action=view)
output of lsmod before running X
Here is the output of lsmod before
http://qa.mandrakesoft.com/show_bug.cgi?id=4505
Product: gnome-desktop
Component: program
Summary: Splashscreen doesn't disappear
Product: gnome-desktop
Version: 2.3.4-1mdk
Platform: PC
OS/Version: All
Status:
http://qa.mandrakesoft.com/show_bug.cgi?id=4171
--- Additional Comments From [EMAIL PROTECTED] 2003-06-08 20:39 ---
This is also true for drakxtools bugs.
--
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
--- You are receiving this mail because: ---
http://qa.mandrakesoft.com/show_bug.cgi?id=4513
Product: urpmi
Component: program
Summary: urpmi.update fails with md5sum mismatch
Product: urpmi
Version: 4.4-18mdk
Platform: PC
OS/Version: All
Status: UNCONFIRMED
71 matches
Mail list logo
