On 26/05/2014 16:55, Ralf Oltmanns wrote:
I updated to 1.15.1-2 and placed the crash-reporter into cygwin64/bin. A
crash report has been submitted to your server. The same problem still
persists.
Thanks very much.
Could you please also install the xorg-server-debuginfo package, remove
To whom it may concern,
I just installed cygwin/X on a freshly installed Windows 7 Professional (64bit).
When trying to start XWin Server, it crashes with signal 11 (Segmentation fault)
My installation is as follows:
Release: 1.15.0.0
Package: version 1.15.0-2 built 2014-01-11
XWin was started
On 26/05/2014 14:18, Ralf Oltmanns wrote:
I just installed cygwin/X on a freshly installed Windows 7 Professional (64bit).
When trying to start XWin Server, it crashes with signal 11 (Segmentation fault)
My installation is as follows:
Release: 1.15.0.0
Package: version 1.15.0-2 built
Thank you for your prompt response. I was out yesterday, so I didn't get
your email until now. I did an update and the issue no longer exists.
Thanks,
Carlo L. DiCocco
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
-config-lvm GUI displays and works fine,
but cygwin generates a fatal error window due to a segmentation fault.
The following command displays the GUI, but reports a fatal error:
[root@aorahdev ~]# system-config-lvm
[ 64144.546] Segmentation fault at address 0x44
[ 64144.546] Fatal server error
GUI
displays fine. The LVM system-config-lvm GUI displays and works fine,
but cygwin generates a fatal error window due to a segmentation fault.
The following command displays the GUI, but reports a fatal error:
[root@aorahdev ~]# system-config-lvm
[ 64144.546] Segmentation fault
), then enter
'xlogo' in xterm, [Cygwin/X] window appears immediately. It says,
A fatal error ...
Caught signal 11 (Segmentation fault). ...
Please open /var/log/xwin/XWin.0.log ...
Vendor: ..
Release: 1.12.0.0
Contact: ..
Package: version 1.12.0-4 built 2012-04-17
XWin was started ...
X
. The xclock GUI displays fine. The Oracle dbca GUI
displays fine. The LVM system-config-lvm GUI displays and works fine,
but cygwin generates a fatal error window due to a segmentation fault.
The following command displays the GUI, but reports a fatal error:
[root@aorahdev ~]# system-config-lvm
Re: xlogo crashes XWin with Fatal Error (Segmentation Fault)
2012.04.26.18:13:33 UT
Hey cygwin-x folks,
I have not had notable difficulties with
XWin-1.12.0-4. Just about everything that I have
done with it over the past few days has been fine.
However, when I
generates a fatal error window due to a segmentation fault.
Please see below:
airs0cld@2UA0070JZB ~
$ ssh -Y root@aorahdev
root@aorahdev's password:
Warning: No xauth data; using fake authentication
data for X11 forwarding.
Last login: Wed Apr 25 14:04:58 2012 from
Haven't used Cygwin/X for some time.
Now when I start it (either with startxwin.exe, XWin.exe, startx etc), I
always get a fatal error:
A fatal error has occurred and Cygwin/X will now exit.
Failed to activate core devices.
The /var/log/XWin.0.log contains the following EE messages
On 25/06/2010 10:12, Miroslav Iliaš wrote:
/var/log/XWin.0.log attached
[ 2936.391] (EE) XKB: Could not invoke xkbcomp
[ 2936.391] (EE) XKB: Couldn't compile keymap
[ 2936.391] XKB: Failed to compile keymap
[ 2936.391] Keyboard initialization failed. This could be a missing or
incorrect
/var/log/XWin.0.log attached
--
RNDr. Miroslav Iliaš, PhD.
Katedra chémie
Fakulta prírodných vied
Univerzita Mateja Bela
Tajovského 40
97400 Banská Bystrica
tel: +421 48 446 7351
email : il...@fpv.umb.sk
Department of Chemistry
Faculty of Natural Sciences
Matej Bel University
Tajovského
I get the following fatal error with my windows xp machine.
A fatal error has occurred and Cygwin/X will now exit.
Please open /tmp/XWin.log for more information.
Vendor: The Cygwin/X Project
Release: 6.8.99.901-4
Contact: cygwin-xfree@cygwin.com
XWin has started with the following command
On 6/9/2010 1:14 PM, marvin.man...@oracle.com wrote:
I get the following fatal error with my windows xp machine.
A fatal error has occurred and Cygwin/X will now exit.
Please open /tmp/XWin.log for more information.
Vendor: The Cygwin/X Project
Release: 6.8.99.901-4
Hi,
I installed Cygwin and the XWin-Server on my PC. When trying to start the XWin
Server I received the following message:
Welcome to the XWin X Server
Vendor: The Cygwin/X Project
Release: 1.8.0.0 (1080)
Build Date: 2010-04-02
Contact: cygwin-xfree@cygwin.com
XWin was started with the
On Sat, May 29, 2010 at 11:42:07AM +0200, David Rockel wrote:
Fatal server error:
Can't read lock file /tmp/.X0-lock
Hello,
I would start checking if /tmp has 1777 perms.
Regards.
--
Huella de clave primaria: 0FDA C36F F110 54F4 D42B D0EB 617D 396C 448B 31EB
pgpjn0SsQ9jcb.pgp
/write access. The Everyone user just has
read access. When I then close my XWin session, the lock file remains. I
log out of Windows, then someone else logs on (also without admin rights),
and they get the fatal error as described in the FAQ item, since they do
not have write access to the lock
just has read
access. When I then close my XWin session, the lock file remains. I log out
of Windows, then someone else logs on (also without admin rights), and they get
the fatal error as described in the FAQ item, since they do not have write
access to the lock file.
If, however, I had
version (3-1-1)). It is supposed to be installed,but when I try to
execute Singular (Emacs and X-server) a fatal error occurs, and in
/var/log/Xwinlog is reported the following error:
Fatal server error:
Can't read lock file /tmp/.X0-lock
I have tried these possible solutions (FAQ):
1
On 08/03/2010 18:31, evgar...@ull.es wrote:
my name is Eva García Llorente, I have installed a new version of
cygwin (that one which is necessary for installing the latest Singular
version (3-1-1)). It is supposed to be installed,but when I try to
execute Singular (Emacs and X-server) a fatal
Hello,
my name is Eva García Llorente, I have installed a new version of
cygwin (that one which is necessary for installing the latest Singular
version (3-1-1)). It is supposed to be installed,but when I try to
execute Singular (Emacs and X-server) a fatal error occurs, and in
/var/log
Hi there, I'm running cygwin 1.7.1. I entered xinit and it brought up
the x server and the xterm. I then entered exit on the xterm to
terminate the xterm. I got Xwin Fatal error. The last few messages in
Xwin.0.log are as follows:
2009-12-30 12:45:31 DetectUnicodeSupport - Windows NT/2000/XP
2009
On 30/12/2009 13:57, ERIC HO wrote:
Hi there, I'm running cygwin 1.7.1. I entered xinit and it brought up
the x server and the xterm. I then entered exit on the xterm to
terminate the xterm. I got Xwin Fatal error.
Problem reports: http://cygwin.com/problems.html
. I got Xwin Fatal error. The last few messages in
Xwin.0.log are as follows:
2009-12-30 12:45:31 DetectUnicodeSupport - Windows NT/2000/XP
2009-12-30 12:45:31 winGetDisplay: DISPLAY=:0.0
2009-12-30 12:45:31 winClipboardProc - DISPLAY=:0.0
2009-12-30 12:45:31 winClipboardProc - XOpenDisplay
On Sat, 12 Sep 2009, Alicia Muirhead wrote:
A fatal error has occurred and Cygwin/X will now exit.
Please open /tmp/XWin.log for more information.
Release: 6.8.99.901-4
XWin was started with the following command-line:
/usr/X11R6/bin/XWin-multiwindow -clipboard -silent-dup-error'
I cannot
A fatal error has occurred and Cygwin/X will now exit.
Please open /tmp/XWin.log for more information.
Release: 6.8.99.901-4
XWin was started with the following command-line:
/usr/X11R6/bin/XWin-multiwindow -clipboard -silent-dup-error'
I cannot open /tmp/XWin.log.
--
Unsubscribe info: http
Hello,
I have just downloaded Cygwin to do some modelling of some of my
research results. I've also installed the X server, Version 1.5.3
(20090222). When I run the X W it gives me the following error
message:
Fatal error, open /var/log.xwin.0.log, Xwin was started with the
following command
On 09/09/2009 23:21, Tanja Kjallman wrote:
Fatal error, open /var/log.xwin.0.log, Xwin was started with the
following command-line: Xwin -mulitiwindow -clipboard
^
XWin isn't very forgiving about misspellings.
Yaakov
Cygwin/X
--
Unsubscribe info: http
On 14/08/2009 08:38, rk ka wrote:
I installed Cygwin/X with the latest setup.exe.
When i run startx I get a fatal error. Please check the attached Xwin
log for details. There is no other instance of X server running. I've
also included the output of cygcheck -s -v -r in cygcheck.out.
Try
Thanks Jon for the reply.
I noticed [1] but did not go beyond reading the subject cuz it read
Vista. Sorry.
Cheers.
2009/8/14 Jon TURNEY jon.tur...@dronecode.org.uk:
On 14/08/2009 08:38, rk ka wrote:
I installed Cygwin/X with the latest setup.exe.
When i run startx I get a fatal error
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
kra...@msu.edu wrote:
Hello. This evening I updated some files for cygwin, which I run on
my Windows XP machine. When I try to re-open my X-window, I now get
the error message:
http://x.cygwin.com/docs/faq/cygwin-x-faq.html#modular
Yaakov
Hello. This evening I updated some files for cygwin, which I run on
my Windows XP machine. When I try to re-open my X-window, I now get
the error message:
A fatal error has occurred and Cygwin/X will now
exit. Please open /tmp/XWin.log for more information.
Vendor: The Cygwin/X Project
I must agree with it. Xwin can't work under vista x64. You can see my previous
email as
Cygwin and vista 64 bit
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation: http://x.cygwin.com/docs/
Dear Cygwin,
I am trying to install FontForge on my Windows Vista laptop and I need
Cygwin shell to run it. To set environmental variables they suggest I
run a BAT file. It looks like it succeeds with the variables but it
cannot execute XWin at the end.
Could you please help me figure out
Nadia Dimitrova wrote:
Dear Cygwin,
One copy of a request is more than enough BTW.
I am trying to install FontForge on my Windows Vista laptop and I need
Cygwin shell to run it. To set environmental variables they suggest I
run a BAT file. It looks like it succeeds with the variables but
First off, Thank you Thank you Thank you.
Ok... So here is what I have.
I open Cygwin.
Type StartX
And I get this error code...
A fatal error has occurred and Cygwin/X will now exit.
Please open /tmp/XWin.log for more information.
Vendor: The cygwin X Project
Release: 6.8.99.901-4
Dear Cygwin staff:
Im a new user of Cygwin. I was trying to run Grass under Cygwin but when
I type startx in the comand console a fatal error occurs. The description is
_XSERVTransmkdir: Owner of /tmp/.X11-unix should be set to root
(II) XF86Config is not supported
(II) See http://x.cygwin.com
Carlos Moran Tejeda wrote:
Dear Cygwin staff:
Im a new user of Cygwin. I was trying to run Grass under Cygwin but when
I type startx in the comand console a fatal error occurs. The
description is
snip
Fatal server error:
could not open default font 'fixed'
Please, could you let me know
Carlos Moran Tejeda wrote on Tuesday, February 05, 2008 2:55 PM::
Fatal server error:
could not open default font 'fixed'
Please, could you let me know how to fix it?
Try looking in the FAQ - there's a link to it at the bottom of
every message on the list.
This is almost always caused by
Dear cygwin,
I have the following error message when I typed startx (My window is
window server 2003).
A fatal error has occurred and Cygwin/X will now exit.
Please open /tmp/Xwin.log for more information.
Vendor: The Cygwin/X Project
Release: 6.8.99.901-4
contact: cygwin-xfree@cygwin.com
Allen Rongone wrote on Monday, May 14, 2007 8:29 PM::
I've seen this before under Windows XP and it was due to the fact
that the previous user was the owner of the /tmp/.X11-unix directory
and no one else had permissions to delete the X0 file nor were they
able to remove this directory. I
attempts to run the startxwin.bat file they get a window that pops up
and says:
A fatal error has occurred and Cygwin/X will now exit.
Please open /tmp/XWin.log for more information.
XWin was started with the following command-line:
/usr/X11R6/bin/XWin -multiwindow -clipboard -silent-dup
Hi, i just downloaded the freeware software with the x11 feature. When i
type 'startx' command, the program seems to run, but ends up giving me a Fatal
error message saying:
A fatal error has occured and Cygwin/X will now exit. Please open /tmp.XWin.log
for more imformation.
please guide
On 11/7/06, Himanshu wrote:
A fatal error has occured and Cygwin/X will now exit. Please open /tmp.XWin.log
for more imformation.
Without posting the entire contents of /tmp.XWin.log, can you tell the
group if you found anything useful there, such as what is the actual
error is being caused
Did you read any of the on-line documentation?
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation: http://x.cygwin.com/docs/
FAQ: http://x.cygwin.com/docs/faq/
, this is a serious problem for me as I can no
longer get X servers running on any of my newly updated/installed
machines.
a fatal error has occurred and Cygwin/X will now exit
XWin was started with the following command line:
/usr/X11R6/bin/XWin -multiwindow -clipboard -silent-dup-error
I read up
. Unfortunately, this is a serious problem for me as I can no
longer get X servers running on any of my newly updated/installed
machines.
a fatal error has occurred and Cygwin/X will now exit
XWin was started with the following command line:
/usr/X11R6/bin/XWin -multiwindow -clipboard -silent
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation: http://x.cygwin.com/docs/
FAQ: http://x.cygwin.com/docs/faq/
. This detection mechanism
seems to be broken with the new release.
Despite the fact that a fatal error has occurred and Cygwin/X will now exit,
all seems to work just fine after dismissing the alert box.
Reverting back to 6.8.2.0-4, all seems to work as before, even with all the
other new X stuff
Apologies for the long lines in my previous message.
Haven't figured out yet how to control Outlook.
(Suggestions welcome.)
--Ken Nellis
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation:
On Mon, Jul 17, 2006 at 10:20:09AM -0400, Kenneth Nellis wrote:
Apologies for the long lines in my previous message.
Haven't figured out yet how to control Outlook.
(Suggestions welcome.)
But suggestions do not go here.
cgf
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
don't know if you even heard about it, it is a C compiler wich
produces Java ByteCode instead, quite a good idea.
The thing is, once it is installed, if i try to start the Xwin server
(following the sequence of commands on the ampcstart bat file), an
error is generated indcating A fatal error has
about it, it is a C compiler wich
produces Java ByteCode instead, quite a good idea.
The thing is, once it is installed, if i try to start the Xwin server
(following the sequence of commands on the ampcstart bat file), an
error is generated indcating A fatal error has ocurred and Cygwin/X
This is a bug-report.
--
Yitwah Cheung
Mathematics Department
San Francisco State University
San Francisco, CA 94132
[EMAIL PROTECTED] (email)
http://math.sfsu.edu/cheung (website)
415-338-1805 (phone)
415-338-1461 (fax)
Welcome to the XWin X Server
Vendor: The Cygwin/X Project
Release:
On Tue, 7 Feb 2006, Yitwah Cheung wrote:
This is a bug-report.
[snip]
Fatal server error - Duplicate invocation on display number: 0. Exiting.
Not a bug:
http://x.cygwin.com/docs/faq/cygwin-x-faq.html#duplicate-invocation.
HTH,
Igor
--
Mit freundlichem Gruß
Dr. Alfred Schlicht
Vortragender Legationsrat
Auswärtiges Amt, Ref. 606
Tel. 01888/173247
Fax 01888/1753247
e-mail: [EMAIL PROTECTED]
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation:
First, I just have to cite Heinlein:
When in danger, or in doubt --
Run in circles, scream, and shout.
Then I'd like to cite the Cygwin problem reporting page at
http://cygwin.com/problems.html, which has some useful hints on how to
report problems properly. For Cygwin/X crashes, it's
:0 -query %REMOTE_HOST%
-nodecoration -lesspointer fails at: Fatal server error: XDMCP fatal
error: Manager unwilling Host unwilling. The full XWin.log follows:
-
Welcome to the XWin X Server
Vendor: The Cygwin/X Project
Release: 6.8.2.0
On Fri, 8 Jul 2005, Angus Veitch wrote:
Running the default startxdmcp.bat with XWin :0 -query %REMOTE_HOST%
-nodecoration -lesspointer fails at: Fatal server error: XDMCP fatal
error: Manager unwilling Host unwilling. The full XWin.log follows:
Fatal server error:
XDMCP fatal error
Hi
I got this message and unable to get my KDE loaded:
==
$startx
+ test -f /home/darwin/.kde_mountchecked
+ IPC_PID=3948
+ ipc_daemon2
+ client_opt=
+ server_opt=
+ xinit /opt/kde3/bin/startkde --
On Fri, 15 Apr 2005, Darwin P Sigumonrong wrote:
Fatal server error:
CAnnot open log file /tmp/XWin.log
I have to add that i installed my Cygwin and KDE3 on Windows XP under
admin login
The strange thing (at least for me) is that the KDE can run when I log in
as admin
but when I
On Thu, 14 Oct 2004, Philippe Wang wrote:
Hello,
I have just installed Cygwin and it works for what I really need to do.
However, when I want to try X11 with the command x, a fatal error
occurs.
Could you help me please?
Check the archives. I've already sent an answer which got blocked
Hello,
I have just installed Cygwin and it works for what I really need to do.
However, when I want to try X11 with the command x, a fatal error
occurs.
Could you help me please ?
Thank you very much,
Philip
(novice user of Linux- and any other related things
Philippe Wang wrote:
Fatal server error:
could not open default font 'fixed'
Can you please try running font-update. What does it output?
bye
ago
NP: NamNamBulu - Forgiving (Transformation Mix)
--
[EMAIL PROTECTED]
http://www.gotti.org ICQ: 126018723
Hello,
I have just installed Cygwin and it works for what I really need to do.
However, when I want to try X11 with the command x, a fatal error
occurs.
Could you help me please?
Thank you very much,
Philip
(novice user of Linux- and any other related things
Dear,
When I executed the command /usr/X11R6/bin/XWin.exe
it gave me A fatal error is occured and Cygwin /X will now exit
I want to excute the command XWin.exe -query IP Address of Linux Server
.
Please help me
Sundar.G
System Administrator
On Tue, 5 Oct 2004, Sundar G wrote:
Dear,
When I executed the command /usr/X11R6/bin/XWin.exe
it gave me A fatal error is occured and Cygwin /X will now exit
I want to excute the command XWin.exe -query IP Address of Linux Server
.
Please help me
What does /tmp/XWin.log tell
Hello,
I installed cygwin-x, Release: 6.8.1.0.
XWin was started with the following command line:
/usr/X11R6/bin/XWin -ac -multiwindow -clipboard
and hereafter the result:
ddxProcessArgument - Initializing default screens
winInitializeDefaultScreens - w 1024 h 768
winInitializeDefaultScreens -
Hi,
I have recently downloaded the cygwin/x program. When
I tried to open it I got a fatal error message saying
that the Cygwin/X will exit.
The Xwin has started with the command
/usr/X11R6/bin/Xwin -multiwindow -clipboard (this is
the default). I looked at the file /tmp/Xwin.log and
it said
vamsi vadhri wrote:
Fatal server error:
InitOutput - Duplicate invocation on display number:
0. Exiting.
Are you running Cygwin/X on a terminal server or any other
system where more than one user can be logged on? Then most likely
another user has already started XWin. To be able to start
On Wed, 9 Jun 2004, Alexander Gottwald wrote:
vamsi vadhri wrote:
Fatal server error:
InitOutput - Duplicate invocation on display number: 0. Exiting.
Are you running Cygwin/X on a terminal server or any other
system where more than one user can be logged on? Then most likely
another
Hi, I have recently downloaded the cygwin/x program. The first time I run
startxwin.bat the external window opened and everyhtink was fine. The
second time I opened it I got a fatal error message saying that the Cygwin/X
will exit. The Xwin has started with the command /usr/X11R6/bin/Xwin
H:\UNIX\cygwinPKGdir
H:\UNIX\cygwin
A fatal error has occurred and Cygwin/X will now exit.
Please open /tmp/XWin.log for more information.
Vendor: The Cygwin/X Project
Release: 4.3.0.50
Contact: [EMAIL PROTECTED]
XWin
H:\UNIX\cygwinPKGdir
H:\UNIX\cygwin
A fatal error has occurred and Cygwin/X will now exit.
Please open /tmp/XWin.log for more information.
Vendor: The Cygwin/X Project
Release: 4.3.0.50
Contact: [EMAIL PROTECTED]
XWin
http://x.cygwin.com/docs/faq/cygwin-x-faq.html#q-error-font-eof
[EMAIL PROTECTED] wrote:
H:\UNIX\cygwinPKGdir
H:\UNIX\cygwin
A fatal error has occurred and Cygwin/X will now exit.
Please open /tmp/XWin.log for more
is installed on the new machine (Pentium III 533, 384Mb).
It works perfect on the previous computer (Pentium 4 2400, 256Mb) but
on this machine shows fatal error, when I start startxwin.bat with the
line: XWin -query morpheus.tran.wau.nl (Linux Debian server)
XWin.log file is attached.
Please help
Dear support team,
Cygwin is installed on the new machine (Pentium III 533, 384Mb).
It works perfect on the previous computer (Pentium 4 2400, 256Mb) but
on this machine shows fatal error, when I start startxwin.bat with the
line: XWin -query morpheus.tran.wau.nl (Linux Debian server)
XWin.log
: Jonathan Primeau [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: (additional info) Can't start gnome-terminal, fatal error
Date: Wed, 15 Oct 2003 10:10:15 -0400
I have more information related to my problem. I hope that this will
make my problem more obvious...
When I run
85
The GNOME desktop displays properly. However, when I run the
gnome-terminal application, the following error occurs:
Application gnome-terminal (process 29819) has crashed due to a fatal
error. (Arithmetic Exception)
I am unable to run Netscape as well. However, I don't get any error
message
I have more information related to my problem. I hope that this will
make my problem more obvious...
When I run gnome-terminal from a standard terminal I get:
BEGIN OUTPUT
** (gnome-terminal:161): WARNING **: Cannot load font for XLFD
WindowsXP Home Ed. SP1
When I attempt to startx I get the following:
-
$ startx
waiting for X server to shut down
$ wmaker fatal error: could not open display :0
-
I've also tried:
-
$ startx -display :1 // I've tried it as 1, :1 and :1 with
the same response
/usr/X11R6/bin
package choices and vim couldn't find some resource. So
| atleast I know it's a configuration problem. Now to pin it down...
|
| I am using WindowsXP Home Ed. SP1
| When I attempt to startx I get the following:
| -
| $ startx
| waiting for X server to shut down
| $ wmaker fatal error: could not open
83 matches
Mail list logo
