Autologin into Davinci

Hello all, Has anyone made the Davinci system standalone. That is right now we have to login over serial terminal and then manually start X windows by typing startx. Has anyone autologged into the system and then start X windows using some start up script. Any suggestions are

Changing X windows frame buffer

Hello, I am facing the following problem with X windows. Whenever I run the decode demos(or any of the demos for that matter) and when move my mouse the background becomes visible. What I came to know is that the demo is using /dev/fb/0 for showing the (various informations like CPU

DVEVM Display on different channels

Hello, I am facing the following problem. I've started x-windows on my DVEVM 6446 board and am running the decode programs. Now the problem is that the display is not good as the video comes as an overlay over the x-windows and not as a seperate window. Now there are 4 video outputs

Running demos in X windows

Hello all, I'm facing a problem while running the demos in X windows. The problem is that when I'm displaying a video then it doesnt diplay the video properly. Random white patches start forming on the screen and the desktop starts becoming visible. Has anyone else faced this problem and

Random system resets

Hello all, I am facing a weird problem. I'm decoding a multimedia file using pthreads for splitting the audio and video streams and decoding these streams using the TI's demo codecs. How ever sometimes the entire system suddenly resets from the beginning (right from U-boot loading

Re: Random system resets

kernel? Montavista? GIT? using nor? nand? hdd? nfs? Regards 2008/3/31, Preetham Soundararajan : Hello all, I am facing a weird problem. I'm decoding a multimedia file using pthreads for splitting the audio and video streams and decoding these streams using the TI's demo codecs. How

RE: UART2 and Video co-existance

Hello John, I did as you said i.e., changed the number of UARTS to 3 in the /ti-davinci/arch/arm/defconfig file. And I recompiled the kernel. But its still the same issue The output of /proc/tty/driver/serial is serinfo:1.0 driver revision: 0: uart:16550A mmio:0x01C2 irq:40 tx:2175

Re: UART2 and Video co-existance

: 25439serial Err: 0 As you can see only UART0 interrupt is enabled and in drivers too only UART0 is present. Can you figure out where I've gone wrong. Thanks, Preetham T Ziomek [EMAIL PROTECTED] wrote: On Wed, Mar 26, 2008 at 05:39:32AM +, Preetham Soundararajan wrote

Re: UART2 and Video co-existance

with flow control??? Because in some of the previous posts people had faced problems with flow control. Thanks again in advance for your help. Preetham.S T Ziomek [EMAIL PROTECTED] wrote: On Tue, Mar 25, 2008 at 06:45:11AM +, Preetham Soundararajan wrote: Hello all, I know

Accessing Processor Registers

Hello all, I want to be able to use both UART2 and CI interface present in the DC4 connector. The way I'm planning to do this is to MUX my devices onto the DC4 connector using a 4pin 2 to 1 MUX. From the DM 6446 datasheet I came to know that there is a register called PINMUX1 in

RE: USB drive and other issues.

Of Preetham Soundararajan Sent: Tuesday, January 08, 2008 11:14 AM To: davinci-linux-open-source@linux.davincidsp.com Subject: USB drive and other issues. Hello all, First of all thanks to everyone for helping out with my LCD problem. Turns out the Adaptor was conked out. Was giving

USB drive and other issues.

Hello all, First of all thanks to everyone for helping out with my LCD problem. Turns out the Adaptor was conked out. Was giving an ouput of only 1volt. Now I'm facing TWO new problems. Problem 1: I'm using u-boot version 1.1.3 on the 6446 DVEVM. During boot up and while normal

RE: USB drive and other issues.

. Regards, Niko -Original Message- From: [EMAIL PROTECTED] com [mailto:[EMAIL PROTECTED] incidsp.com] On Behalf Of Preetham Soundararajan Sent: Tuesday, January 08, 2008 11:14 AM To: davinci-linux-open-source@linux.davincidsp.com Subject: USB drive and other issues. Hello all

Sample Programs

Hello all, I've just got the DVEVM board from Spectrum Digital and wanted to test if everything is all right. I have connected as per the Quick Start Guide and powered it on. But I'm not observing anything on the LCD display I've tried the decode sample programs but found that

Re: Sample Programs

for ntsc itself i.e., davincieffect_ntsc.m2v I hope I've answered your queries. Regards, Preetham Zgembo Adislic [EMAIL PROTECTED] wrote: You should check videostd variable in u-boot. See if it is set to PAL or NTSC and also see which video format your simple app uses. Benjamin Preetham