Re: [PATCH v3 0/6] omap-am33xx rtc dt support
Hi Andrew, On Monday 27 August 2012 01:05 PM, Mohammed, Afzal wrote: On Sat, Aug 11, 2012 at 01:27:11, Nori, Sekhar wrote: On 7/27/2012 5:53 PM, Afzal Mohammed wrote: This series makes rtc-omap driver DT capable, adds AM33xx RTC DT support along with a few enchancments to the driver. rtc-omap driver is made intelligent enough to handle kicker mechanism. This helps in removing kicker mechanism support done for DaVinci at platform level. This has been tested on Beaglebone (AM33xx platform) and on DaVinci DA850 EVM. I tested patches 1-5 on AM18x EVM using rtcwake and hwclock commands. Also tested on DT enabled AM18x EVM using hwclock. For patched 1-5: Acked-by: Sekhar Nori Alessandro, I assume you would want me to queue 2/6 through DaVinci tree. That patch depends on 1/6 being accepted and merged by you. Let me know how you want to move forward here. Can you please help 1-5 patches in this series to get into mainline. 1-5 of this series is a prerequisite for adding RTC support for AM335X SoC's, which is present in beaglebone, AM335X EVM. This series which adds rtc support for AM335x SoC (ARM Cortex-A8 from TI) based boards (like beagle bone) and in the process making omap rtc driver device tree capable was posted after addressing review comments around July end. It seems rtc maintainer is not active and you are taking care of the rtc patches. Patches 1-5 has been Acked by DaVinci maintainer. Can you please help this series reach mainline, let me know whether this series needs to be reposted. I waited to see response from rtc maintainer, it seems wait went too far and this mail should have been sent a couple of weeks before start of merge window. As merge window is coming to an end, I feel it may be bad to ask you this , but still: would it be possible to get the series in during this merge window. A recap of what this series is about, omap-rtc driver used by DaVinci and OMAP1 platforms is being reused for AM335x. Kicker release mechanism that is handled by DaVinci platform code has been moved to rtc driver. AM335x also needs to handle kicker mechanism. DT support has been added to omap-rtc driver, this was necessitated as AM335x supports only DT boot (DaVinci platform is also going DT way) Patch 6 adds AM335x DT support (this probably should go through omap tree). This series has been tested on beagle bone and DaVinci DA850 EVM. Regards Afzal ___ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
RE: [PATCH v3 0/6] omap-am33xx rtc dt support
Hi Alessandro, On Sat, Aug 11, 2012 at 01:27:11, Nori, Sekhar wrote: > On 7/27/2012 5:53 PM, Afzal Mohammed wrote: > > This series makes rtc-omap driver DT capable, adds AM33xx > > RTC DT support along with a few enchancments to the driver. > > > > rtc-omap driver is made intelligent enough to handle kicker > > mechanism. This helps in removing kicker mechanism support > > done for DaVinci at platform level. > > > > This has been tested on Beaglebone (AM33xx platform) and on > > DaVinci DA850 EVM. > > > > This series is based over linux-omap master and can be > > directly applied over linux-next, except for > > [PATCH 6/6] arm/dts: am33xx rtc node. > > > > PATCH 6/6 should go through linux-omap tree and needs > > http://www.mail-archive.com/linux-omap@vger.kernel.org/msg71644.html > > (arm/dts: am33xx wdt node) to get applied cleanly > > I tested patches 1-5 on AM18x EVM using rtcwake and hwclock commands. > Also tested on DT enabled AM18x EVM using hwclock. > > For patched 1-5: > > Acked-by: Sekhar Nori > > Alessandro, > > I assume you would want me to queue 2/6 through DaVinci tree. That patch > depends on 1/6 being accepted and merged by you. Let me know how you > want to move forward here. Can you please help 1-5 patches in this series to get into mainline. 1-5 of this series is a prerequisite for adding RTC support for AM335X SoC's, which is present in beaglebone, AM335X EVM. Also this series does cleanup on DaVinci platform by moving kicker handling mechanism to driver. And we have Ack from DaVinci maintainer on 1-5 of this series. Patch 6/6 adds AM335X RTC DT support, not sure whether you can take 6/6 or Tony should be taking it. The series applies cleanly over linux-next (now including 6/6) Regards Afzal ___ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
Re: [PATCH v3 0/6] omap-am33xx rtc dt support
On 7/27/2012 5:53 PM, Afzal Mohammed wrote: > Hi, > > This series makes rtc-omap driver DT capable, adds AM33xx > RTC DT support along with a few enchancments to the driver. > > rtc-omap driver is made intelligent enough to handle kicker > mechanism. This helps in removing kicker mechanism support > done for DaVinci at platform level. > > This has been tested on Beaglebone (AM33xx platform) and on > DaVinci DA850 EVM. > > This series is based over linux-omap master and can be > directly applied over linux-next, except for > [PATCH 6/6] arm/dts: am33xx rtc node. > > PATCH 6/6 should go through linux-omap tree and needs > http://www.mail-archive.com/linux-omap@vger.kernel.org/msg71644.html > (arm/dts: am33xx wdt node) to get applied cleanly I tested patches 1-5 on AM18x EVM using rtcwake and hwclock commands. Also tested on DT enabled AM18x EVM using hwclock. For patched 1-5: Acked-by: Sekhar Nori Alessandro, I assume you would want me to queue 2/6 through DaVinci tree. That patch depends on 1/6 being accepted and merged by you. Let me know how you want to move forward here. Thanks, Sekhar ___ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
[PATCH v3 0/6] omap-am33xx rtc dt support
Hi, This series makes rtc-omap driver DT capable, adds AM33xx RTC DT support along with a few enchancments to the driver. rtc-omap driver is made intelligent enough to handle kicker mechanism. This helps in removing kicker mechanism support done for DaVinci at platform level. This has been tested on Beaglebone (AM33xx platform) and on DaVinci DA850 EVM. This series is based over linux-omap master and can be directly applied over linux-next, except for [PATCH 6/6] arm/dts: am33xx rtc node. PATCH 6/6 should go through linux-omap tree and needs http://www.mail-archive.com/linux-omap@vger.kernel.org/msg71644.html (arm/dts: am33xx wdt node) to get applied cleanly Regards Afzal v3: Remove unit address in DT node Use readb/writeb instead of __raw_* variants Remove unnecessary parens v2: Use device name da830-rtc instead of am1808-rtc, similar change in compatible for DT Newly added register name made similar to that existing in the driver Better commit message description Modify Kconfig help, resolve checkpatch warning Afzal Mohammed (5): rtc: omap: kicker mechanism support ARM: davinci: remove rtc kicker release rtc: omap: dt support rtc: omap: depend on am33xx arm/dts: am33xx rtc node Vaibhav Hiremath (1): rtc: omap: Add runtime pm support Documentation/devicetree/bindings/rtc/rtc-omap.txt | 20 + arch/arm/boot/dts/am33xx.dtsi |5 + arch/arm/mach-davinci/devices-da8xx.c | 13 +--- drivers/rtc/Kconfig| 10 ++- drivers/rtc/rtc-omap.c | 79 +++- 5 files changed, 108 insertions(+), 19 deletions(-) create mode 100644 Documentation/devicetree/bindings/rtc/rtc-omap.txt ___ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source