Re: [deal.II] dealii installation issue on NERSC Cori

2020-10-26 Thread Timo Heister 
>Thanks for you suggestion. I tested step-1 and step-2 again and they ran 
> successfully after I set the number of OpenMP threads to 1. I only plan plan 
> on running MPI codes without any multi-threading. The BLAS implementation I 
> am using is a part of the Intel MKL library which is already present within 
> one of the default modules which loads intel compilers and intel 
> implementations of other commonly used libraries. Would you recommend using 
> another BLAS implementation or install one manually?

No, just make sure you set OMP_NUM_THREADS=1 in your job script.

> Installing deal.ii on the Cori system was definitely a bit convoluted since 
> even the original cmake and make install had to be run on the compute node, 
> and that was an extremely slow process taking a few hours to complete even 
> with make -j64 install(unlike the login nodes where the entire thing would be 
> done in about 30 minutes). In one of their(NERSC) 
> presentations(https://www.nersc.gov/assets/Uploads/06-Compiling-Codes.pdf, 
> slide 14) they do recommend swapping a haswell module with mic-knl module and 
> compiling on login nodes whenever possible(slide 20). That's what I had tried 
> earlier and did so again yesterday, and then running step-1(interactively on 
> a compute node) yielded the following error :

Yes, while I have no experience with working on system like this, I am
not surprised that this is challenging.

> make[3]: *** No rule to make target '/usr/lib64/libopenblas.so', needed by 
> 'step-1'. Stop.

That means this library is missing on the compute node.

-- 
Timo Heister
http://www.math.clemson.edu/~heister/

-- 
The deal.II project is located at http://www.dealii.org/
For mailing list/forum options, see 
https://groups.google.com/d/forum/dealii?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"deal.II User Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to dealii+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/dealii/CAMRj59Fc%3D0rufUOhDupGA_KLWQnYvF_fuNZ%2BuEuPafG%2Bk%3DSRNA%40mail.gmail.com.

Re: [deal.II] dealii installation issue on NERSC Cori

2020-10-26 Thread Aaditya Lakshmanan 
Hi Timo,
   Thanks for you suggestion. I tested step-1 and step-2 again and they ran 
successfully after I set the number of OpenMP threads to 1. I only plan 
plan on running MPI codes without any multi-threading. The BLAS 
implementation I am using is a part of the Intel MKL library which is 
already present within one of the default modules which loads intel 
compilers and intel implementations of other commonly used libraries. Would 
you recommend using another BLAS implementation or install one manually?  

Installing deal.ii on the Cori system was definitely a bit convoluted since 
even the original *cmake* and *make install* had to be run on the compute 
node, and that was an extremely slow process taking a few hours to complete 
even with *make -j64 install(*unlike the login nodes where the entire thing 
would be done in about 30 minutes*)*. In one of their(NERSC) 
presentations(https://www.nersc.gov/assets/Uploads/06-Compiling-Codes.pdf, 
slide 14) they do recommend swapping a haswell module with mic-knl module 
and compiling on login nodes whenever possible(slide 20). That's what I had 
tried earlier and did so again yesterday, and then running 
step-1(interactively on a compute node) yielded the following error :




*make[3]: *** No rule to make target '/usr/lib64/libopenblas.so', needed by 
'step-1'. Stop.make[2]: *** [CMakeFiles/Makefile2:137: 
CMakeFiles/step-1.dir/all] Error 2make[1]: *** [CMakeFiles/Makefile2:181: 
CMakeFiles/run.dir/rule] Error 2make: *** [Makefile:157: run] Error 2 *

the reason for which I don't know. I will probably go through the entire 
installation process that worked for me once again and document it. 
Eventually I need deal.ii as a prerequisite for another package that is 
built on it. Thank you for your help.

Best,
Aaditya


On Monday, October 26, 2020 at 9:01:44 AM UTC-4 Timo Heister wrote:

> Can you try setting
>
> export OMP_NUM_THREADS=1
>
> before running any of the examples?
>
> If you are planning on running MPI-only codes, you don't need to use
> OpenMP in your BLAS implementation.
>
>
> On Sun, Oct 25, 2020 at 7:25 PM Aaditya Lakshmanan
>  wrote:
> >
> > Hi Timo,
> > I cleaned the previous installation and started with a fresh build. This 
> time after a compilation and installation(with MPI, LAPACK, P4EST and 
> PETSC), trying to run examples/step-1 in the installation directory :
> >
> > cmake .
> > make -j16
> >
> > ran successfully after which
> >
> > make run
> >
> > resulted in the following output :
> >
> > [ 66%] Built target step-1
> > [100%] Run step-1 with Debug configuration
> >
> > OpenBLAS Warning : The number of CPU/Cores(272) is beyond the 
> limit(256). Terminated.
> > make[3]: *** [CMakeFiles/run.dir/build.make:58: CMakeFiles/run] Error 1
> > make[2]: *** [CMakeFiles/Makefile2:174: CMakeFiles/run.dir/all] Error 2
> > make[1]: *** [CMakeFiles/Makefile2:181: CMakeFiles/run.dir/rule] Error 2
> > make: *** [Makefile:157: run] Error 2
> >
> > Regarding your questions and suggestions, the libdeal_ii.g.so file is 
> about 1.6GB. Do you know what the above error signifies? Thank you.
> >
> > Best,
> > Aaditya
> >
> >
> >
> > On Sunday, October 25, 2020 at 2:10:21 PM UTC-4 Timo Heister wrote:
> >>
> >> > Seems like there might then be some issue with the LAPACK, P4EST or 
> PETSC installation I am using.
> >>
> >> I doubt it, when looking at this error:
> >>
> >> >> /usr/bin/ld: 
> /global/project/projectdirs/m2360/packagesCPFE/dealii_install/lib/
> libdeal_II.g.so: file not recognized: file truncated
> >>
> >> This sounds like the linking of the .so file failed. Can you take a
> >> look at this file (check the size?)? You can try deleting the file and
> >> running "make install" again. Maybe the last linker step failed?
> >> If this does not help, maybe try the release mode examples as well.
> >>
> >>
> >>
> >>
> >> --
> >> Timo Heister
> >> http://www.math.clemson.edu/~heister/
> >
> > --
> > The deal.II project is located at http://www.dealii.org/
> > For mailing list/forum options, see 
> https://groups.google.com/d/forum/dealii?hl=en
> > ---
> > You received this message because you are subscribed to the Google 
> Groups "deal.II User Group" group.
> > To unsubscribe from this group and stop receiving emails from it, send 
> an email to dealii+un...@googlegroups.com.
> > To view this discussion on the web visit 
> https://groups.google.com/d/msgid/dealii/5facbeb5-33f3-4474-8ae0-bca848c20b6an%40googlegroups.com
> .
>
>
>
> -- 
> Timo Heister
> http://www.math.clemson.edu/~heister/
>

-- 
The deal.II project is located at http://www.dealii.org/
For mailing list/forum options, see 
https://groups.google.com/d/forum/dealii?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"deal.II User Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to dealii+unsubscr...@googlegroups.com.
To view this discussion on the web visit

Re: [deal.II] dealii installation issue on NERSC Cori

2020-10-26 Thread Timo Heister 
Can you try setting

export OMP_NUM_THREADS=1

before running any of the examples?

If you are planning on running MPI-only codes, you don't need to use
OpenMP in your BLAS implementation.


On Sun, Oct 25, 2020 at 7:25 PM Aaditya Lakshmanan
 wrote:
>
> Hi Timo,
>I cleaned the previous installation and started with a fresh build. This 
> time after a compilation and installation(with MPI, LAPACK, P4EST and PETSC), 
> trying to run examples/step-1 in the installation directory :
>
> cmake .
> make -j16
>
> ran successfully after which
>
> make run
>
> resulted in the following output :
>
> [ 66%] Built target step-1
> [100%] Run step-1 with Debug configuration
>
> OpenBLAS Warning : The number of CPU/Cores(272) is beyond the limit(256). 
> Terminated.
> make[3]: *** [CMakeFiles/run.dir/build.make:58: CMakeFiles/run] Error 1
> make[2]: *** [CMakeFiles/Makefile2:174: CMakeFiles/run.dir/all] Error 2
> make[1]: *** [CMakeFiles/Makefile2:181: CMakeFiles/run.dir/rule] Error 2
> make: *** [Makefile:157: run] Error 2
>
> Regarding your questions and suggestions, the libdeal_ii.g.so file is about 
> 1.6GB. Do you know what the above error signifies? Thank you.
>
> Best,
> Aaditya
>
>
>
> On Sunday, October 25, 2020 at 2:10:21 PM UTC-4 Timo Heister wrote:
>>
>> > Seems like there might then be some issue with the LAPACK, P4EST or PETSC 
>> > installation I am using.
>>
>> I doubt it, when looking at this error:
>>
>> >> /usr/bin/ld: 
>> >> /global/project/projectdirs/m2360/packagesCPFE/dealii_install/lib/libdeal_II.g.so:
>> >>  file not recognized: file truncated
>>
>> This sounds like the linking of the .so file failed. Can you take a
>> look at this file (check the size?)? You can try deleting the file and
>> running "make install" again. Maybe the last linker step failed?
>> If this does not help, maybe try the release mode examples as well.
>>
>>
>>
>>
>> --
>> Timo Heister
>> http://www.math.clemson.edu/~heister/
>
> --
> The deal.II project is located at http://www.dealii.org/
> For mailing list/forum options, see 
> https://groups.google.com/d/forum/dealii?hl=en
> ---
> You received this message because you are subscribed to the Google Groups 
> "deal.II User Group" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to dealii+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/dealii/5facbeb5-33f3-4474-8ae0-bca848c20b6an%40googlegroups.com.



-- 
Timo Heister
http://www.math.clemson.edu/~heister/

-- 
The deal.II project is located at http://www.dealii.org/
For mailing list/forum options, see 
https://groups.google.com/d/forum/dealii?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"deal.II User Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to dealii+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/dealii/CAMRj59E4nb_6PumUFQCOkJR66LL3CB3CQcHuA9dRRAukW05dzg%40mail.gmail.com.

Re: [deal.II] dealii installation issue on NERSC Cori

2020-10-25 Thread Aaditya Lakshmanan 
Hi Timo,
   I cleaned the previous installation and started with a fresh build. This 
time after a compilation and installation(with MPI, LAPACK, P4EST and 
PETSC), trying to run examples/step-1 in the installation directory :

cmake .
make -j16

ran successfully after which 

make run 

resulted in the following output :

[ 66%] Built target step-1
[100%] Run step-1 with Debug configuration

OpenBLAS Warning : The number of CPU/Cores(272) is beyond the limit(256). 
Terminated.
make[3]: *** [CMakeFiles/run.dir/build.make:58: CMakeFiles/run] Error 1
make[2]: *** [CMakeFiles/Makefile2:174: CMakeFiles/run.dir/all] Error 2
make[1]: *** [CMakeFiles/Makefile2:181: CMakeFiles/run.dir/rule] Error 2
make: *** [Makefile:157: run] Error 2

Regarding your questions and suggestions, the *libdeal_ii.g.so* file is 
about 1.6GB. Do you know what the above error signifies? Thank you.

Best,
Aaditya



On Sunday, October 25, 2020 at 2:10:21 PM UTC-4 Timo Heister wrote:

> > Seems like there might then be some issue with the LAPACK, P4EST or 
> PETSC installation I am using.
>
> I doubt it, when looking at this error:
>
> >> /usr/bin/ld: 
> /global/project/projectdirs/m2360/packagesCPFE/dealii_install/lib/
> libdeal_II.g.so: file not recognized: file truncated
>
> This sounds like the linking of the .so file failed. Can you take a
> look at this file (check the size?)? You can try deleting the file and
> running "make install" again. Maybe the last linker step failed?
> If this does not help, maybe try the release mode examples as well.
>
>
>
>
> -- 
> Timo Heister
> http://www.math.clemson.edu/~heister/
>

-- 
The deal.II project is located at http://www.dealii.org/
For mailing list/forum options, see 
https://groups.google.com/d/forum/dealii?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"deal.II User Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to dealii+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/dealii/5facbeb5-33f3-4474-8ae0-bca848c20b6an%40googlegroups.com.

Re: [deal.II] dealii installation issue on NERSC Cori

2020-10-25 Thread Timo Heister 
> Seems like there might then be some issue with the LAPACK, P4EST or PETSC 
> installation I am using.

I doubt it, when looking at this error:

>> /usr/bin/ld: 
>> /global/project/projectdirs/m2360/packagesCPFE/dealii_install/lib/libdeal_II.g.so:
>>  file not recognized: file truncated

This sounds like the linking of the .so file failed. Can you take a
look at this file (check the size?)? You can try deleting the file and
running "make install" again. Maybe the last linker step failed?
If this does not help, maybe try the release mode examples as well.




-- 
Timo Heister
http://www.math.clemson.edu/~heister/

-- 
The deal.II project is located at http://www.dealii.org/
For mailing list/forum options, see 
https://groups.google.com/d/forum/dealii?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"deal.II User Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to dealii+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/dealii/CAMRj59G9BuRqPkSRWBEL%3Dr5U7_U59F8dGnoOW0yZYqhmpyig%2Bw%40mail.gmail.com.

Re: [deal.II] dealii installation issue on NERSC Cori

2020-10-24 Thread Aaditya Lakshmanan 
Hi Timo, 
I tried another compilation and installation of deal.ii without PETSC, 
P4EST and LAPACK(by setting the corresponding 
DEAL_II_WITH_PACKAGENAME=OFF). After successfully completing installation I 
tried the examples step-1 and step-2 with *cmake . ; make ; make run*, and 
both of them ran successfully. However, switching back to the build 
directory and running *make test* resulted in failure of all quick tests. 
Seems like there might then be some issue with the LAPACK, P4EST or PETSC 
installation I am using. I will try the installation process with different 
subsets of these packages and try to pinpoint the issue. What do you think?

Best,
Aaditya 
   

On Saturday, October 24, 2020 at 5:43:50 PM UTC-4 Aaditya Lakshmanan wrote:

> Hi Timo,
> Thank you for your suggestion. I repeated the installation process and 
> this time I didn't run the quick_tests. Rather I changed to examples/step-1 
> directory in the deal.ii installation and executed the following :
>
> *cmake .  *
> *make *
>
> which exited with the following error :
>
> *Scanning dependencies of target step-1*
> *[ 50%] Building CXX object CMakeFiles/step-1.dir/step-1.cc.o*
> *[100%] Linking CXX executable step-1*
> */usr/bin/ld: 
> /global/project/projectdirs/m2360/packagesCPFE/dealii_install/lib/libdeal_II.g.so
>  
> : file not recognized: file truncated*
> *make[2]: *** [CMakeFiles/step-1.dir/build.make:95: step-1] Error 1*
> *make[1]: *** [CMakeFiles/Makefile2:137: CMakeFiles/step-1.dir/all] Error 
> 2*
> *make: *** [Makefile:84: all] Error 2*
>
>
> I am not sure why this is the case since installation completed without 
> issues. I have attached the files *detailed.log* and *make_output.txt*(output 
> from *make -j8 install* on the KNL compute node).
>
> Best,
> Aaditya
>
>
> On Saturday, October 24, 2020 at 10:38:49 AM UTC-4 Timo Heister wrote:
>
>> Running the tests seems to have triggered a rebuild of deal.iII. Can you 
>> try running some of the tutorial steps instead? 
>>
>> On Fri, Oct 23, 2020, 17:05 Aaditya Lakshmanan  
>> wrote:
>>
>>> Hi Wolfgang,
>>>I tried compiling, installing and running the deal.ii tests 
>>> interactively on a KNL compute node. Both compilation and installation were 
>>> seemingly successful but all the tests failed. I have attached the output 
>>> from make test in the file *test_output.txt*. An example error looks 
>>> like the following :
>>> 2/11 Test  #1: step.debug ...***Failed  265.99 sec
>>> gmake[6]: *** write jobserver: Invalid argument.  Stop.
>>> gmake[6]: *** Waiting for unfinished jobs
>>> gmake[6]: *** write jobserver: Invalid argument.  Stop.
>>> gmake[5]: *** [CMakeFiles/Makefile2:10829: 
>>> tests/quick_tests/CMakeFiles/step.debug.run.dir/rule] Error 2
>>> gmake[4]: *** [Makefile:3700: step.debug.run] Error 2
>>> Test step.debug: BUILD
>>> ===   OUTPUT BEGIN  
>>> ===
>>> step.debug: BUILD failed. Output:
>>> [  0%] Built target obj_sundials_inst
>>> [ 21%] Built target obj_physics_elasticity_inst
>>> [ 30%] Built target obj_dofs_inst
>>> [ 25%] Built target obj_matrix_free_inst
>>> [ 23%] Built target obj_amd_global_debug
>>> [ 34%] Built target obj_umfpack_DI_TRIPLET_MAP_NOX_debug
>>> [ 30%] Built target obj_differentiation_ad_inst
>>> [ 34%] Built target obj_multigrid_inst
>>> [ 59%] Built target obj_physics_inst
>>> [ 59%] Built target obj_non_matching_inst
>>> [ 59%] Built target obj_gmsh_inst
>>> [ 34%] Built target obj_distributed_inst
>>> [ 34%] Built target kill-step.debug-OK
>>> [ 34%] Built target obj_muparser_debug
>>> [ 34%] Built target obj_umfpack_DL_SOLVE_debug
>>> [ 59%] Built target obj_numerics_inst
>>> [ 59%] Built target obj_boost_system_debug
>>> [ 59%] Built target obj_umfpack_DL_STORE_debug
>>> [ 59%] Built target obj_umfpack_DL_TRIPLET_MAP_NOX_debug
>>> [ 59%] Built target obj_umfpack_DL_TRIPLET_MAP_X_debug
>>> [ 59%] Built target obj_umfpack_DI_TSOLVE_debug
>>> [ 78%] Built target obj_base_inst
>>> [ 78%] Built target obj_grid_inst
>>> [ 59%] Built target obj_umfpack_DI_SOLVE_debug
>>> [ 34%] Built target obj_amd_int_debug
>>> [ 59%] Built target obj_algorithms_inst
>>> [ 59%] Built target obj_meshworker_inst
>>> [ 59%] Built target obj_hp_inst
>>> [ 78%] Built target obj_particle_inst
>>> [ 59%] Built target obj_differentiation_sd_inst
>>> [ 59%] Built target obj_opencascade_inst
>>> [ 78%] Built target obj_lac_inst
>>> [ 59%] Built target obj_amd_long_debug
>>> [ 59%] Built target obj_umfpack_DL_TSOLVE_debug
>>> [ 59%] Built target obj_umfpack_DI_STORE_debug
>>> [ 59%] Built target obj_umfpack_DL_TRIPLET_NOMAP_X_debug
>>> [ 59%] Built target obj_umfpack_DI_TRIPLET_MAP_X_debug
>>> [ 59%] Built target obj_umfpack_DI_TRIPLET_NOMAP_X_debug
>>> [ 59%] Built target obj_umfpack_GENERIC_debug
>>> [ 78%] Built target obj_umfpack_DL_ASSEMBLE_debug
>>> [ 59%] Built target obj_umfpack_DI_ASSEMBLE_debug
>>> [ 84%] Built target obj_fe_inst
>>>
>>>

Re: [deal.II] dealii installation issue on NERSC Cori

2020-10-24 Thread Aaditya Lakshmanan 
Hi Timo,
Thank you for your suggestion. I repeated the installation process and 
this time I didn't run the quick_tests. Rather I changed to examples/step-1 
directory in the deal.ii installation and executed the following :

*cmake .  *
*make *

which exited with the following error :

*Scanning dependencies of target step-1*
*[ 50%] Building CXX object CMakeFiles/step-1.dir/step-1.cc.o*
*[100%] Linking CXX executable step-1*
*/usr/bin/ld: 
/global/project/projectdirs/m2360/packagesCPFE/dealii_install/lib/libdeal_II.g.so:
 
file not recognized: file truncated*
*make[2]: *** [CMakeFiles/step-1.dir/build.make:95: step-1] Error 1*
*make[1]: *** [CMakeFiles/Makefile2:137: CMakeFiles/step-1.dir/all] Error 2*
*make: *** [Makefile:84: all] Error 2*


I am not sure why this is the case since installation completed without 
issues. I have attached the files *detailed.log* and *make_output.txt*(output 
from *make -j8 install* on the KNL compute node).

Best,
Aaditya


On Saturday, October 24, 2020 at 10:38:49 AM UTC-4 Timo Heister wrote:

> Running the tests seems to have triggered a rebuild of deal.iII. Can you 
> try running some of the tutorial steps instead? 
>
> On Fri, Oct 23, 2020, 17:05 Aaditya Lakshmanan  wrote:
>
>> Hi Wolfgang,
>>I tried compiling, installing and running the deal.ii tests 
>> interactively on a KNL compute node. Both compilation and installation were 
>> seemingly successful but all the tests failed. I have attached the output 
>> from make test in the file *test_output.txt*. An example error looks 
>> like the following :
>> 2/11 Test  #1: step.debug ...***Failed  265.99 sec
>> gmake[6]: *** write jobserver: Invalid argument.  Stop.
>> gmake[6]: *** Waiting for unfinished jobs
>> gmake[6]: *** write jobserver: Invalid argument.  Stop.
>> gmake[5]: *** [CMakeFiles/Makefile2:10829: 
>> tests/quick_tests/CMakeFiles/step.debug.run.dir/rule] Error 2
>> gmake[4]: *** [Makefile:3700: step.debug.run] Error 2
>> Test step.debug: BUILD
>> ===   OUTPUT BEGIN  
>> ===
>> step.debug: BUILD failed. Output:
>> [  0%] Built target obj_sundials_inst
>> [ 21%] Built target obj_physics_elasticity_inst
>> [ 30%] Built target obj_dofs_inst
>> [ 25%] Built target obj_matrix_free_inst
>> [ 23%] Built target obj_amd_global_debug
>> [ 34%] Built target obj_umfpack_DI_TRIPLET_MAP_NOX_debug
>> [ 30%] Built target obj_differentiation_ad_inst
>> [ 34%] Built target obj_multigrid_inst
>> [ 59%] Built target obj_physics_inst
>> [ 59%] Built target obj_non_matching_inst
>> [ 59%] Built target obj_gmsh_inst
>> [ 34%] Built target obj_distributed_inst
>> [ 34%] Built target kill-step.debug-OK
>> [ 34%] Built target obj_muparser_debug
>> [ 34%] Built target obj_umfpack_DL_SOLVE_debug
>> [ 59%] Built target obj_numerics_inst
>> [ 59%] Built target obj_boost_system_debug
>> [ 59%] Built target obj_umfpack_DL_STORE_debug
>> [ 59%] Built target obj_umfpack_DL_TRIPLET_MAP_NOX_debug
>> [ 59%] Built target obj_umfpack_DL_TRIPLET_MAP_X_debug
>> [ 59%] Built target obj_umfpack_DI_TSOLVE_debug
>> [ 78%] Built target obj_base_inst
>> [ 78%] Built target obj_grid_inst
>> [ 59%] Built target obj_umfpack_DI_SOLVE_debug
>> [ 34%] Built target obj_amd_int_debug
>> [ 59%] Built target obj_algorithms_inst
>> [ 59%] Built target obj_meshworker_inst
>> [ 59%] Built target obj_hp_inst
>> [ 78%] Built target obj_particle_inst
>> [ 59%] Built target obj_differentiation_sd_inst
>> [ 59%] Built target obj_opencascade_inst
>> [ 78%] Built target obj_lac_inst
>> [ 59%] Built target obj_amd_long_debug
>> [ 59%] Built target obj_umfpack_DL_TSOLVE_debug
>> [ 59%] Built target obj_umfpack_DI_STORE_debug
>> [ 59%] Built target obj_umfpack_DL_TRIPLET_NOMAP_X_debug
>> [ 59%] Built target obj_umfpack_DI_TRIPLET_MAP_X_debug
>> [ 59%] Built target obj_umfpack_DI_TRIPLET_NOMAP_X_debug
>> [ 59%] Built target obj_umfpack_GENERIC_debug
>> [ 78%] Built target obj_umfpack_DL_ASSEMBLE_debug
>> [ 59%] Built target obj_umfpack_DI_ASSEMBLE_debug
>> [ 84%] Built target obj_fe_inst
>>
>>
>> step.debug: **BUILD failed***
>>
>> ===OUTPUT END  
>>  ===
>> Expected stage PASSED - aborting
>> CMake Error at 
>> /global/project/projectdirs/m2360/packagesCPFE/dealii/cmake/scripts/run_test.cmake:140
>>  
>> (MESSAGE):
>>   *** abort
>>
>>
>> Best,
>> Aaditya
>>
>> On Friday, October 23, 2020 at 2:00:00 AM UTC-4 Aaditya Lakshmanan wrote:
>>
>>> Hi Wolfgang,
>>>Thanks for your suggestion. I just checked that the Cori login nodes 
>>> are Haswell processors while the compute nodes on which I wish to run 
>>> simulations eventually are KNL processors(certain modules are also with 
>>> that intention). I will use idev to access the compute nodes interactively 
>>> and try the build, installation and testing phases again. 
>>>
>>> Best,
>>> Aaditya
>>>
>>> On Thursday, October 22, 2020 at 11:29:38 PM UTC-4 Wolfgang

Re: [deal.II] dealii installation issue on NERSC Cori

2020-10-24 Thread Timo Heister 
Running the tests seems to have triggered a rebuild of deal.iII. Can you
try running some of the tutorial steps instead?

On Fri, Oct 23, 2020, 17:05 Aaditya Lakshmanan 
wrote:

> Hi Wolfgang,
>I tried compiling, installing and running the deal.ii tests
> interactively on a KNL compute node. Both compilation and installation were
> seemingly successful but all the tests failed. I have attached the output
> from make test in the file *test_output.txt*. An example error looks like
> the following :
> 2/11 Test  #1: step.debug ...***Failed  265.99 sec
> gmake[6]: *** write jobserver: Invalid argument.  Stop.
> gmake[6]: *** Waiting for unfinished jobs
> gmake[6]: *** write jobserver: Invalid argument.  Stop.
> gmake[5]: *** [CMakeFiles/Makefile2:10829:
> tests/quick_tests/CMakeFiles/step.debug.run.dir/rule] Error 2
> gmake[4]: *** [Makefile:3700: step.debug.run] Error 2
> Test step.debug: BUILD
> ===   OUTPUT BEGIN
> ===
> step.debug: BUILD failed. Output:
> [  0%] Built target obj_sundials_inst
> [ 21%] Built target obj_physics_elasticity_inst
> [ 30%] Built target obj_dofs_inst
> [ 25%] Built target obj_matrix_free_inst
> [ 23%] Built target obj_amd_global_debug
> [ 34%] Built target obj_umfpack_DI_TRIPLET_MAP_NOX_debug
> [ 30%] Built target obj_differentiation_ad_inst
> [ 34%] Built target obj_multigrid_inst
> [ 59%] Built target obj_physics_inst
> [ 59%] Built target obj_non_matching_inst
> [ 59%] Built target obj_gmsh_inst
> [ 34%] Built target obj_distributed_inst
> [ 34%] Built target kill-step.debug-OK
> [ 34%] Built target obj_muparser_debug
> [ 34%] Built target obj_umfpack_DL_SOLVE_debug
> [ 59%] Built target obj_numerics_inst
> [ 59%] Built target obj_boost_system_debug
> [ 59%] Built target obj_umfpack_DL_STORE_debug
> [ 59%] Built target obj_umfpack_DL_TRIPLET_MAP_NOX_debug
> [ 59%] Built target obj_umfpack_DL_TRIPLET_MAP_X_debug
> [ 59%] Built target obj_umfpack_DI_TSOLVE_debug
> [ 78%] Built target obj_base_inst
> [ 78%] Built target obj_grid_inst
> [ 59%] Built target obj_umfpack_DI_SOLVE_debug
> [ 34%] Built target obj_amd_int_debug
> [ 59%] Built target obj_algorithms_inst
> [ 59%] Built target obj_meshworker_inst
> [ 59%] Built target obj_hp_inst
> [ 78%] Built target obj_particle_inst
> [ 59%] Built target obj_differentiation_sd_inst
> [ 59%] Built target obj_opencascade_inst
> [ 78%] Built target obj_lac_inst
> [ 59%] Built target obj_amd_long_debug
> [ 59%] Built target obj_umfpack_DL_TSOLVE_debug
> [ 59%] Built target obj_umfpack_DI_STORE_debug
> [ 59%] Built target obj_umfpack_DL_TRIPLET_NOMAP_X_debug
> [ 59%] Built target obj_umfpack_DI_TRIPLET_MAP_X_debug
> [ 59%] Built target obj_umfpack_DI_TRIPLET_NOMAP_X_debug
> [ 59%] Built target obj_umfpack_GENERIC_debug
> [ 78%] Built target obj_umfpack_DL_ASSEMBLE_debug
> [ 59%] Built target obj_umfpack_DI_ASSEMBLE_debug
> [ 84%] Built target obj_fe_inst
>
>
> step.debug: **BUILD failed***
>
> ===OUTPUT END
>  ===
> Expected stage PASSED - aborting
> CMake Error at
> /global/project/projectdirs/m2360/packagesCPFE/dealii/cmake/scripts/run_test.cmake:140
> (MESSAGE):
>   *** abort
>
>
> Best,
> Aaditya
>
> On Friday, October 23, 2020 at 2:00:00 AM UTC-4 Aaditya Lakshmanan wrote:
>
>> Hi Wolfgang,
>>Thanks for your suggestion. I just checked that the Cori login nodes
>> are Haswell processors while the compute nodes on which I wish to run
>> simulations eventually are KNL processors(certain modules are also with
>> that intention). I will use idev to access the compute nodes interactively
>> and try the build, installation and testing phases again.
>>
>> Best,
>> Aaditya
>>
>> On Thursday, October 22, 2020 at 11:29:38 PM UTC-4 Wolfgang Bangerth
>> wrote:
>>
>>>
>>> Aaditya,
>>> is NERSC Cori a machine where the front-end node runs a different
>>> processor/system than the compute nodes? If so, you're building a
>>> library for
>>> the compute nodes, and the tests are also built for the compute nodes.
>>> But
>>> you're trying to run the test executables on the front-end node -- which
>>> might
>>> help explain the error you see.
>>>
>>> Best
>>> W.
>>>
>>>
>>> On 10/22/20 7:52 PM, Aaditya Lakshmanan wrote:
>>> > Hi Everyone,
>>> >I have been trying to install deal.ii on the NERSC Cori System and
>>> after a
>>> > seemingly successful cmake and make install, make test yields failure
>>> for all
>>> > the tests setup. I briefly detail the procedure I followed and the
>>> outputs and
>>> > errors obtained.
>>> >
>>> > As a pre-requisite I installed p4est using the setup script(with some
>>> > modifications) and petsc manually with the configure.py script and
>>> appropriate
>>> > settings. The following modules were loaded :
>>> >
>>> > Currently Loaded Modulefiles:
>>> >   1) modules/3.2.11.4  5) craype-network-aries
>>> 9)
>>> > PrgEnv-intel/6.0.5   13)

Re: [deal.II] dealii installation issue on NERSC Cori

2020-10-23 Thread Aaditya Lakshmanan 
Hi Wolfgang,
   I tried compiling, installing and running the deal.ii tests 
interactively on a KNL compute node. Both compilation and installation were 
seemingly successful but all the tests failed. I have attached the output 
from make test in the file *test_output.txt*. An example error looks like 
the following :
2/11 Test  #1: step.debug ...***Failed  265.99 sec
gmake[6]: *** write jobserver: Invalid argument.  Stop.
gmake[6]: *** Waiting for unfinished jobs
gmake[6]: *** write jobserver: Invalid argument.  Stop.
gmake[5]: *** [CMakeFiles/Makefile2:10829: 
tests/quick_tests/CMakeFiles/step.debug.run.dir/rule] Error 2
gmake[4]: *** [Makefile:3700: step.debug.run] Error 2
Test step.debug: BUILD
===   OUTPUT BEGIN  
===
step.debug: BUILD failed. Output:
[  0%] Built target obj_sundials_inst
[ 21%] Built target obj_physics_elasticity_inst
[ 30%] Built target obj_dofs_inst
[ 25%] Built target obj_matrix_free_inst
[ 23%] Built target obj_amd_global_debug
[ 34%] Built target obj_umfpack_DI_TRIPLET_MAP_NOX_debug
[ 30%] Built target obj_differentiation_ad_inst
[ 34%] Built target obj_multigrid_inst
[ 59%] Built target obj_physics_inst
[ 59%] Built target obj_non_matching_inst
[ 59%] Built target obj_gmsh_inst
[ 34%] Built target obj_distributed_inst
[ 34%] Built target kill-step.debug-OK
[ 34%] Built target obj_muparser_debug
[ 34%] Built target obj_umfpack_DL_SOLVE_debug
[ 59%] Built target obj_numerics_inst
[ 59%] Built target obj_boost_system_debug
[ 59%] Built target obj_umfpack_DL_STORE_debug
[ 59%] Built target obj_umfpack_DL_TRIPLET_MAP_NOX_debug
[ 59%] Built target obj_umfpack_DL_TRIPLET_MAP_X_debug
[ 59%] Built target obj_umfpack_DI_TSOLVE_debug
[ 78%] Built target obj_base_inst
[ 78%] Built target obj_grid_inst
[ 59%] Built target obj_umfpack_DI_SOLVE_debug
[ 34%] Built target obj_amd_int_debug
[ 59%] Built target obj_algorithms_inst
[ 59%] Built target obj_meshworker_inst
[ 59%] Built target obj_hp_inst
[ 78%] Built target obj_particle_inst
[ 59%] Built target obj_differentiation_sd_inst
[ 59%] Built target obj_opencascade_inst
[ 78%] Built target obj_lac_inst
[ 59%] Built target obj_amd_long_debug
[ 59%] Built target obj_umfpack_DL_TSOLVE_debug
[ 59%] Built target obj_umfpack_DI_STORE_debug
[ 59%] Built target obj_umfpack_DL_TRIPLET_NOMAP_X_debug
[ 59%] Built target obj_umfpack_DI_TRIPLET_MAP_X_debug
[ 59%] Built target obj_umfpack_DI_TRIPLET_NOMAP_X_debug
[ 59%] Built target obj_umfpack_GENERIC_debug
[ 78%] Built target obj_umfpack_DL_ASSEMBLE_debug
[ 59%] Built target obj_umfpack_DI_ASSEMBLE_debug
[ 84%] Built target obj_fe_inst


step.debug: **BUILD failed***

===OUTPUT END  
 ===
Expected stage PASSED - aborting
CMake Error at 
/global/project/projectdirs/m2360/packagesCPFE/dealii/cmake/scripts/run_test.cmake:140
 
(MESSAGE):
  *** abort


Best,
Aaditya

On Friday, October 23, 2020 at 2:00:00 AM UTC-4 Aaditya Lakshmanan wrote:

> Hi Wolfgang,
>Thanks for your suggestion. I just checked that the Cori login nodes 
> are Haswell processors while the compute nodes on which I wish to run 
> simulations eventually are KNL processors(certain modules are also with 
> that intention). I will use idev to access the compute nodes interactively 
> and try the build, installation and testing phases again. 
>
> Best,
> Aaditya
>
> On Thursday, October 22, 2020 at 11:29:38 PM UTC-4 Wolfgang Bangerth wrote:
>
>>
>> Aaditya, 
>> is NERSC Cori a machine where the front-end node runs a different 
>> processor/system than the compute nodes? If so, you're building a library 
>> for 
>> the compute nodes, and the tests are also built for the compute nodes. 
>> But 
>> you're trying to run the test executables on the front-end node -- which 
>> might 
>> help explain the error you see. 
>>
>> Best 
>> W. 
>>
>>
>> On 10/22/20 7:52 PM, Aaditya Lakshmanan wrote: 
>> > Hi Everyone, 
>> >I have been trying to install deal.ii on the NERSC Cori System and 
>> after a 
>> > seemingly successful cmake and make install, make test yields failure 
>> for all 
>> > the tests setup. I briefly detail the procedure I followed and the 
>> outputs and 
>> > errors obtained. 
>> > 
>> > As a pre-requisite I installed p4est using the setup script(with some 
>> > modifications) and petsc manually with the configure.py script and 
>> appropriate 
>> > settings. The following modules were loaded : 
>> > 
>> > Currently Loaded Modulefiles: 
>> >   1) modules/3.2.11.4  5) craype-network-aries  9) 
>> > PrgEnv-intel/6.0.5   13) valgrind/3.15.0 
>> >   2) altd/2.0  6) craype/2.6.2 10) 
>> > craype-mic-knl   14) zlib/1.2.11 
>> >   3) darshan/3.1.7 7) pmi/5.0.14   11) 
>> > cray-mpich/7.7.1415) cmake/3.14.4 
>> >   4) intel/19.0.3.199  8) atp/2.1.3

Re: [deal.II] dealii installation issue on NERSC Cori

2020-10-23 Thread Aaditya Lakshmanan 
Hi Wolfgang,
   Thanks for your suggestion. I just checked that the Cori login nodes are 
Haswell processors while the compute nodes on which I wish to run 
simulations eventually are KNL processors(certain modules are also with 
that intention). I will use idev to access the compute nodes interactively 
and try the build, installation and testing phases again. 

Best,
Aaditya

On Thursday, October 22, 2020 at 11:29:38 PM UTC-4 Wolfgang Bangerth wrote:

>
> Aaditya,
> is NERSC Cori a machine where the front-end node runs a different 
> processor/system than the compute nodes? If so, you're building a library 
> for 
> the compute nodes, and the tests are also built for the compute nodes. But 
> you're trying to run the test executables on the front-end node -- which 
> might 
> help explain the error you see.
>
> Best
> W.
>
>
> On 10/22/20 7:52 PM, Aaditya Lakshmanan wrote:
> > Hi Everyone,
> >I have been trying to install deal.ii on the NERSC Cori System and 
> after a 
> > seemingly successful cmake and make install, make test yields failure 
> for all 
> > the tests setup. I briefly detail the procedure I followed and the 
> outputs and 
> > errors obtained.
> > 
> > As a pre-requisite I installed p4est using the setup script(with some 
> > modifications) and petsc manually with the configure.py script and 
> appropriate 
> > settings. The following modules were loaded :
> > 
> > Currently Loaded Modulefiles:
> >   1) modules/3.2.11.4  5) craype-network-aries  9) 
> > PrgEnv-intel/6.0.5   13) valgrind/3.15.0
> >   2) altd/2.0  6) craype/2.6.2 10) 
> > craype-mic-knl   14) zlib/1.2.11
> >   3) darshan/3.1.7 7) pmi/5.0.14   11) 
> > cray-mpich/7.7.1415) cmake/3.14.4
> >   4) intel/19.0.3.199  8) atp/2.1.312) 
> > craype-hugepages2M   16) cray-hdf5-parallel/1.10.5.2
> > 
> > 
> > After setting the environment variables P4EST_DIR, PETSC_DIR and 
> PETSC_ARCH, I 
> > compiled dealii-9.1.1 as follows :
> > 
> > *cmake -DCMAKE_SYSTEM_NAME=CrayLinuxEnvironment -DCMAKE_C_COMPILER=cc 
> > -DCMAKE_CXX_COMPILER=CC -DCMAKE_Fortran_COMPILER=ftn 
> -DDEAL_II_WITH_MPI=ON 
> > -DDEAL_II_WITH_PETSC=ON -DDEAL_II_WITH_P4EST=ON -DDEAL_II_WITH_LAPACK=ON 
> > -DCMAKE_INSTALL_PREFIX=$CPFE_PACKAGES/dealii_install  ../dealii
> > *
> > 
> > which ran successfully. I have attached the file *detailed.log*. Then 
> > installing via
> > 
> > *make -j8 install *
> > 
> > ran without issues. I have attached the output from the above command in 
> the 
> > file *make_output.txt*. Then running the tests as
> > 
> > *make -j4 test *
> > *
> > *
> > reports failure for all the tests. I have attached the entire output 
> from the 
> > above command in the file test_output.txt and an example error below :
> > 
> > 2/11 Test  #2: step.release .***Failed0.69 sec
> > gmake[6]: *** read jobs pipe: Bad file descriptor.  Stop.
> > gmake[6]: *** Waiting for unfinished jobs
> > gmake[5]: *** [CMakeFiles/Makefile2:10861: 
> > tests/quick_tests/CMakeFiles/step.release.run.dir/rule] Error 2
> > gmake[4]: *** [Makefile:3713: step.release.run] Error 2
> > Test step.release: BUILD
> > ===   OUTPUT BEGIN  
> ===
> > step.release: BUILD failed. Output:
> > [  1%] Built target obj_boost_iostreams_release
> > 
> > 
> > step.release: **BUILD failed***
> > 
> > ===OUTPUT END  
>  ===
> > Expected stage PASSED - aborting
> > CMake Error at 
> > 
> /global/project/projectdirs/m2360/packagesCPFE/dealii/cmake/scripts/run_test.cmake:140
>  
>
> > (MESSAGE):
> >   *** abort
> > 
> > I  am unable to understand what the issue might. Any insight on this 
> will be 
> > appreciated. Thank you.
> > 
> > Best,
> > Aaditya
> > 
> > -- 
> > The deal.II project is located at http://www.dealii.org/ 
> > <
> https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.dealii.org%2F=04%7C01%7CWolfgang.Bangerth%40colostate.edu%7C67682f15035d469a23df08d876f649b8%7Cafb58802ff7a4bb1ab21367ff2ecfc8b%7C0%7C0%7C637390147477029066%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000=snjl%2Fkw1PYq4xwYh0SGB03l6XvsgS8%2FfWr5sdHO4aI0%3D=0
> >
> > For mailing list/forum options, see 
> > https://groups.google.com/d/forum/dealii?hl=en 
> > <
> https://nam01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.google.com%2Fd%2Fforum%2Fdealii%3Fhl%3Den=04%7C01%7CWolfgang.Bangerth%40colostate.edu%7C67682f15035d469a23df08d876f649b8%7Cafb58802ff7a4bb1ab21367ff2ecfc8b%7C0%7C0%7C637390147477039065%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000=QD7qw6euanb6yVAY0KMhGpNc0%2B0APSrikkenzbG4wGU%3D=0
> >
> > ---
> > You received this message because you are subscribed to the

Re: [deal.II] dealii installation issue on NERSC Cori

2020-10-22 Thread Wolfgang Bangerth 



Aaditya,
is NERSC Cori a machine where the front-end node runs a different 
processor/system than the compute nodes? If so, you're building a library for 
the compute nodes, and the tests are also built for the compute nodes. But 
you're trying to run the test executables on the front-end node -- which might 
help explain the error you see.


Best
 W.


On 10/22/20 7:52 PM, Aaditya Lakshmanan wrote:

Hi Everyone,
    I have been trying to install deal.ii on the NERSC Cori System and after a 
seemingly successful cmake and make install, make test yields failure for all 
the tests setup. I briefly detail the procedure I followed and the outputs and 
errors obtained.


As a pre-requisite I installed p4est using the setup script(with some 
modifications) and petsc manually with the configure.py script and appropriate 
settings. The following modules were loaded :


Currently Loaded Modulefiles:
   1) modules/3.2.11.4              5) craype-network-aries          9) 
PrgEnv-intel/6.0.5           13) valgrind/3.15.0
   2) altd/2.0                      6) craype/2.6.2                 10) 
craype-mic-knl               14) zlib/1.2.11
   3) darshan/3.1.7                 7) pmi/5.0.14                   11) 
cray-mpich/7.7.14            15) cmake/3.14.4
   4) intel/19.0.3.199              8) atp/2.1.3                    12) 
craype-hugepages2M           16) cray-hdf5-parallel/1.10.5.2



After setting the environment variables P4EST_DIR, PETSC_DIR and PETSC_ARCH, I 
compiled dealii-9.1.1 as follows :


*cmake -DCMAKE_SYSTEM_NAME=CrayLinuxEnvironment -DCMAKE_C_COMPILER=cc 
-DCMAKE_CXX_COMPILER=CC -DCMAKE_Fortran_COMPILER=ftn -DDEAL_II_WITH_MPI=ON 
-DDEAL_II_WITH_PETSC=ON -DDEAL_II_WITH_P4EST=ON -DDEAL_II_WITH_LAPACK=ON  
-DCMAKE_INSTALL_PREFIX=$CPFE_PACKAGES/dealii_install  ../dealii

*

which ran successfully. I have attached the file *detailed.log*. Then 
installing via


*make -j8 install *

ran without issues. I have attached the output from the above command in the 
file *make_output.txt*. Then running the tests as


*make -j4 test *
*
*
reports failure for all the tests. I have attached the entire output from the 
above command in the file test_output.txt and an example error below :


2/11 Test  #2: step.release .***Failed    0.69 sec
gmake[6]: *** read jobs pipe: Bad file descriptor.  Stop.
gmake[6]: *** Waiting for unfinished jobs
gmake[5]: *** [CMakeFiles/Makefile2:10861: 
tests/quick_tests/CMakeFiles/step.release.run.dir/rule] Error 2

gmake[4]: *** [Makefile:3713: step.release.run] Error 2
Test step.release: BUILD
===   OUTPUT BEGIN  ===
step.release: BUILD failed. Output:
[  1%] Built target obj_boost_iostreams_release


step.release: **    BUILD failed    ***

===    OUTPUT END   ===
Expected stage PASSED - aborting
CMake Error at 
/global/project/projectdirs/m2360/packagesCPFE/dealii/cmake/scripts/run_test.cmake:140 
(MESSAGE):

   *** abort

I  am unable to understand what the issue might. Any insight on this will be 
appreciated. Thank you.


Best,
Aaditya

--
The deal.II project is located at http://www.dealii.org/ 

For mailing list/forum options, see 
https://groups.google.com/d/forum/dealii?hl=en 


---
You received this message because you are subscribed to the Google Groups 
"deal.II User Group" group.
To unsubscribe from this group and stop receiving emails from it, send an 
email to dealii+unsubscr...@googlegroups.com 
.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/dealii/ec2fe941-4ba0-498f-8a9f-009b48022977n%40googlegroups.com

[deal.II] dealii installation issue on NERSC Cori

2020-10-22 Thread Aaditya Lakshmanan 
Hi Everyone,
   I have been trying to install deal.ii on the NERSC Cori System and after 
a seemingly successful cmake and make install, make test yields failure for 
all the tests setup. I briefly detail the procedure I followed and the 
outputs and errors obtained.

As a pre-requisite I installed p4est using the setup script(with some 
modifications) and petsc manually with the configure.py script and 
appropriate settings. The following modules were loaded :

Currently Loaded Modulefiles:
  1) modules/3.2.11.4  5) craype-network-aries  9) 
PrgEnv-intel/6.0.5   13) valgrind/3.15.0
  2) altd/2.0  6) craype/2.6.2 10) 
craype-mic-knl   14) zlib/1.2.11
  3) darshan/3.1.7 7) pmi/5.0.14   11) 
cray-mpich/7.7.1415) cmake/3.14.4
  4) intel/19.0.3.199  8) atp/2.1.312) 
craype-hugepages2M   16) cray-hdf5-parallel/1.10.5.2


After setting the environment variables P4EST_DIR, PETSC_DIR and 
PETSC_ARCH, I compiled dealii-9.1.1 as follows :


*cmake -DCMAKE_SYSTEM_NAME=CrayLinuxEnvironment -DCMAKE_C_COMPILER=cc 
-DCMAKE_CXX_COMPILER=CC -DCMAKE_Fortran_COMPILER=ftn -DDEAL_II_WITH_MPI=ON 
-DDEAL_II_WITH_PETSC=ON -DDEAL_II_WITH_P4EST=ON -DDEAL_II_WITH_LAPACK=ON  
-DCMAKE_INSTALL_PREFIX=$CPFE_PACKAGES/dealii_install  ../dealii*

which ran successfully. I have attached the file *detailed.log*. Then 
installing via

*make -j8 install *

ran without issues. I have attached the output from the above command in 
the file *make_output.txt*. Then running the tests as 

*make -j4 test *

reports failure for all the tests. I have attached the entire output from 
the above command in the file test_output.txt and an example error below :

 2/11 Test  #2: step.release .***Failed0.69 sec
gmake[6]: *** read jobs pipe: Bad file descriptor.  Stop.
gmake[6]: *** Waiting for unfinished jobs
gmake[5]: *** [CMakeFiles/Makefile2:10861: 
tests/quick_tests/CMakeFiles/step.release.run.dir/rule] Error 2
gmake[4]: *** [Makefile:3713: step.release.run] Error 2
Test step.release: BUILD
===   OUTPUT BEGIN  
===
step.release: BUILD failed. Output:
[  1%] Built target obj_boost_iostreams_release


step.release: **BUILD failed***

===OUTPUT END  
 ===
Expected stage PASSED - aborting
CMake Error at 
/global/project/projectdirs/m2360/packagesCPFE/dealii/cmake/scripts/run_test.cmake:140
 
(MESSAGE):
  *** abort

I  am unable to understand what the issue might. Any insight on this will 
be appreciated. Thank you.

Best,
Aaditya

-- 
The deal.II project is located at http://www.dealii.org/
For mailing list/forum options, see 
https://groups.google.com/d/forum/dealii?hl=en
--- 
You received this message because you are subscribed to the Google Groups 
"deal.II User Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to dealii+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/dealii/ec2fe941-4ba0-498f-8a9f-009b48022977n%40googlegroups.com.
###
#
#  deal.II configuration:
#CMAKE_BUILD_TYPE:   DebugRelease
#BUILD_SHARED_LIBS:  ON
#CMAKE_INSTALL_PREFIX:   
/global/project/projectdirs/m2360/packagesCPFE/dealii_install
#CMAKE_SOURCE_DIR:   
/global/project/projectdirs/m2360/packagesCPFE/dealii
#(version 9.1.1, shortrev 777cf92a41)
#CMAKE_BINARY_DIR:   
/global/project/projectdirs/m2360/packagesCPFE/build
#CMAKE_CXX_COMPILER: Intel 19.0.0.20190206 on platform 
CrayLinuxEnvironment x86_64
#/opt/cray/pe/craype/2.6.2/bin/CC
#CMAKE_C_COMPILER:   /opt/cray/pe/craype/2.6.2/bin/cc
#CMAKE_Fortran_COMPILER: /opt/cray/pe/craype/2.6.2/bin/ftn
#CMAKE_GENERATOR:Unix Makefiles
#
#CROSSCOMPILING!
#
#  Base configuration (prior to feature configuration):
#DEAL_II_CXX_FLAGS:-fpic -ansi -w2 -diag-disable=remark 
-wd21 -wd68 -wd135 -wd175 -wd177 -wd191 -wd193 -wd279 -wd327 -wd383 -wd981 
-wd1418 -wd1478 -wd1572 -wd2259 -wd2536 -wd2651 -wd3415 -wd15531 -wd111 -wd128 
-wd185 -wd186 -wd280 -std=c++17
#DEAL_II_CXX_FLAGS_RELEASE:-O2 -no-ansi-alias -ip -funroll-loops
#DEAL_II_CXX_FLAGS_DEBUG:  -O0 -g -gdwarf-2 -grecord-gcc-switches
#DEAL_II_LINKER_FLAGS: -Wl,--as-needed -shared-intel -rdynamic
#DEAL_II_LINKER_FLAGS_RELEASE: 
#DEAL_II_LINKER_FLAGS_DEBUG:   
#DEAL_II_DEFINITIONS:  
#DEAL_II_DEFINITIONS_RELEASE:  
#DEAL_II_DEFINITIONS_DEBUG:DEBUG
#DEAL_II_USER_DEFINITIONS: 
#DEAL_II_USER_DEFINITIONS_REL: 
#DEAL_II_USER_DEFINITIONS_DEB: DEBUG
#DEAL_II_INCLUDE_DIRS