* Joey Hess [EMAIL PROTECTED] [2004-05-02 14:20]:
I don't know anything about LVM, but wouldn't a subdirectory of /dev/ be
a way to fix this?
LVM creates devices under /dev. You first create a Physical Group on
an existing /dev/ide/.. device (or sda, md, etc). Then you create a
Volume Group,
On Sun, May 02, 2004 at 03:31:47PM -0500, Stephen R Marenka wrote:
On Sat, May 01, 2004 at 10:42:17PM -0400, Joey Hess wrote:
- Is partman too slow to be used on m68k?
No, at least not on the 040's and better.
It was slow, but compared to the rest of the installer, it was not
increadibly
Package: installation-reports
Version: '#240504'
Severity: normal
Followup-For: Bug #240504
See Bug #244783 (package: pcmcia-cs) for a work around this bug.
Basically, there is a
problem with resource ranges for pcmcia on Inspiron laptops. When you
run the debian-installer, after load installer
Hi Dennis,
Can you respond to this bug report about the German translation of
console-data?
Thanks,
Alastair
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processing commands for [EMAIL PROTECTED]:
reassign 243623 console-data
Bug#243623: Tottasten is not a german word
Bug reassigned from package `kbd-chooser' to `console-data'.
tags 243623 moreinfo
Bug#243623: Tottasten is not a german word
Tags were: d-i
Tags added: moreinfo
thanks
Stopping
* Martin Michlmayr [EMAIL PROTECTED] [2004-05-01 21:05]:
| * tbm [EMAIL PROTECTED] [2004-04-24 19:56]:
| Thorsten,
|
| can we switch to lvm2 after beta4?
|
| Now that beta4 is out, do you mind if I change it to use lvm2?
Of course, please go ahead!
--
Thorsten Sauter
[EMAIL PROTECTED]
On Sun, May 02, 2004 at 02:17:02PM -0400, Joey Hess wrote:
Martin Michlmayr wrote:
I'm working on d-i support for MIPS based Cobalt machines. These
don't have graphics cards, so you have to do the installation via the
serial console. However, not everyone has a null modem cable... I've
Package: installation-reports
Debian-installer-version: 05022004 - http://www.debian.org/devel/debian-installer
uname -a: can't install
Date: Sun May 2 17:35:02 EDT 2004
Method: installed from
http://http.us.debian.org/debian/dists/testing/main/installer-i386/current/images/netboot/2.6/mini.iso
On Sun, May 02, 2004 at 09:47:37PM +1000, Jonathan Matthew wrote:
On Sun, May 02, 2004 at 11:40:08AM +0100, Colin Watson wrote:
It was perfectly fine here, so no, I don't think that's the case at all.
I'd like to see the contents of the directory corresponding to that
filesystem in
Steve Langasek wrote:
How about
Please choose whether PC card services should be started in order to
allow the use of PCMCIA cards.
?
I like it..
I agree that the original is more ambiguous than necessary, and that the
second is a bit repetitive.
Agreed.
--
see shy jo
Processing commands for [EMAIL PROTECTED]:
tags 242358 + pending
Bug#242358: discover1: configure.ac is missing some languages
There were no tags set.
Tags added: pending
tags 243310 + pending
Bug#243310: discover: Unaligned traps when executed on alpha
There were no tags set.
Tags added:
* Jeremy D. May [EMAIL PROTECTED] [2004-04-13 23:52]:
no.
booted fine. thnx
And did it also work?
In fact, can you try beta4?
http://people.debian.org/~tbm/d-i/images/mips/2004-05-02/
--
Martin Michlmayr
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
* Brad Langhorst [EMAIL PROTECTED] [2004-05-02 17:47]:
Machine: vmware virtual machine
Root Device: scsi virtual disk
The system did not detect my disk - which is fine - however it did not
complain... I was very confused the partitioning questions because they
did not display any disks.
Package: installation-reports
Debian-installer-version: May 2, 2004, beta 4 from cdimage.debian.org
uname -a: Linux elea 2.6.3-1-386 #2 Tue Feb 24 20:20:23 EST 2004 i686
GNU/Linux
Date: May 2, 2004, early afternoon (Pacific time).
Method: Boot from 110MB CD image. Net install.
Machine:
Package: installation-reports
Debian-installer-version:
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/beta4/sarge-i386-netinst.iso
uname -a: didn't do it but the kernel was 2.6.3-1-i386 or something
Date: 03/05/2004 00.00
Method: CD
Machine: Assembled
Processor: Celeron 450 Mhz
On Sat, May 01, 2004 at 01:29:55PM -0400, Joey Hess wrote:
The most important build is the current official release, currently
beta5 of the installer.
Shouldn't that be beta4 instead?
Michael
--
Michael Banck
Debian Developer
[EMAIL PROTECTED]
Hi,
i downloaded the netinstall isoimage for beta4 of the debian installer.
md5sum are all ok.
Machine: selfmade
Processor: AMD ATHLON 64 3200+
Memory: 1024 MB (2x512Mb)
Root Device: SATA Hitachi 120 Gb at VIA6420
Root Size/partition table:
hde1: ca. 80Gb Windows
hde2: ca. 18GB /
hde3: ca. 20GB
* Matijs van Zuijlen [EMAIL PROTECTED] [2004-01-18 11:32]:
After the initial boot, the language selection came up:
- It was unclear _how_ the keyboard layout would be affected. In the
Netherlands, US keyboards are used most, but dutch layouts exist as well.
At this point in the install it
* Sebastien Bacher [EMAIL PROTECTED] [2004-01-17 22:29]:
I've made a bunch on tests with daily iso of the first days of
january without any problem on boot, but the beta 2 doesn't boot at
all here. The boot just hang with Loading after the Boot :
validation. No . drawing at screen, and
reassign 228347 console-data
retitle 228347 PowerBook G4 layout for Italian
thanks
* Edoardo Panfili [EMAIL PROTECTED] [2004-01-20 00:11]:
I hope that this one can help
edoardo
--
# for PowerBook G4
# some gliphs are not on the keyboard
* Mark Janssen [EMAIL PROTECTED] [2004-01-19 23:03]:
Ok... I've made some progress on my part... I'm netbooting the lifimage
now, and i'm currently running the installer.
However... booting from cd doesn't work... (currently)
Can you try beta4 on hppa and report whether it works for you?
--
* Alex Lian [EMAIL PROTECTED] [2004-01-17 17:14]:
from
http://ftp.us.debian.org/debian/dists/sarge/main/installer-i386/current/images/
(Apologies for the last short message, I tabbed too far.)
Floppy booted to initial screen, also gets to
Loading linux
Loading initrd.gz...
* Christian Perrier [EMAIL PROTECTED] [2004-01-20 17:55]:
This report will lead to subsequent bug reports against the given packages
asking them to *lower* the debconf priority they use.
I will make another installation with ALL tasks selected in tasksel. I'm
already prepared to a
* John Lightsey [EMAIL PROTECTED] [2004-01-22 10:02]:
Well I just spent a few hours backing some changes out of
arch/alpha/kernel/pci.c and compiling a new 2.4.24 kernel, but I'm coming up
empty handed. The diff between 2.4.19 and 2.4.20 is 70 lines long.
At any rate, this report
reassign 228695 discover-data
thanks
* Thorsten Sauter [EMAIL PROTECTED] [2004-01-20 10:39]:
The emulated tulip network card is not autodetected by d-i. But I can choose
is from the list of available network modules. But, after this, I get an error,
that no network card is detected. The network
* Giuseppe Sacco [EMAIL PROTECTED] [2004-01-20 02:59]:
The file system were created and mounted, the base system download and installed,
but when
installing the kernel package kernel-image-2.4.34-1-386 I got a fatal error.
There were no error messages in tty4 and I followed the menu to select
* Nagy Gabor [EMAIL PROTECTED] [2004-01-20 20:23]:
For some reason the installer thought that I had a 80x30 display, and it
tried to use that area. I was in 80x25, so the last 5 lines were not
visible.
Can you please use the new beta4 and tell us if this still happens?
After installation the
Processing commands for [EMAIL PROTECTED]:
reassign 228695 discover-data
Bug#228695: VirtualPC 2004 installation report
Bug reassigned from package `installation-reports' to `discover-data'.
thanks
Stopping processing here.
Please contact me if you need assistance.
Debian bug tracking system
Processing commands for [EMAIL PROTECTED]:
reassign 228347 console-data
Bug#228347: INSTALL REPORT
Bug reassigned from package `installation-reports' to `console-data'.
retitle 228347 PowerBook G4 layout for Italian
Bug#228347: INSTALL REPORT
Changed Bug title.
thanks
Stopping processing
On Sat, May 01, 2004 at 08:57:34AM +0200, Christian Perrier wrote:
Quoting Wang WenRui ([EMAIL PROTECTED]):
Hi,
There are two phrases choose country in the countrychooser need to
be fixed(changed to Choose a country, territory or area). While only
one of them is fixed in beta4.
* Michel Weynants [EMAIL PROTECTED] [2004-01-22 21:56]:
ar: /target//var/cache/apt/archives/dpkg_1.10.18_i386.deb
/var/cache/apt/archives/dpkg_1.9.21_i386.deb: No such file or directory
zcat: Short read
ln: /target/usr/bin/awk: File exists
I have no idea why this would happen. Can you please
reassign 228910 discover1-data
thanks
Toshikazu, can you please send the output of the command: lspci -n
a, b, and c are problems with discover
--
Martin Michlmayr
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
* Stephen Frost [EMAIL PROTECTED] [2004-01-20 15:58]:
Package: installation-reports
Version: Beta2; Downloaded: 18-Jan-2004
Stephen, can you look at this bug report, try beta4 and tell us which
issues are still left?
--
Martin Michlmayr
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL
* Adam Majer [EMAIL PROTECTED] [2004-01-20 20:01]:
Debian-installer-version: Got it sometime in mid January, 2004
http://people.debian.org/cdimage/testing/netinst/powerpc/beta2/sarge-powerpc-netinst.iso
uname -a: Linux g3bw 2.4.22-powerpc #1 jeu dACc 18 10:17:34 CET 2003 ppc GNU/Linux
Date:
Processing commands for [EMAIL PROTECTED]:
reassign 228910 discover1-data
Bug#228910: debina installer beta2 on GA-8I875
Bug reassigned from package `installation-reports' to `discover1-data'.
thanks
Stopping processing here.
Please contact me if you need assistance.
Debian bug tracking
Processing commands for [EMAIL PROTECTED]:
reassign 229048 base-config
Bug#229048: apt sources reset after interrupted installation
Bug reassigned from package `installation-reports' to `base-config'.
thanks
Stopping processing here.
Please contact me if you need assistance.
Debian bug
Email loading
Image not loading? See message here.Discon
iC8.91Kmenv1MvQGO/3fl7O.vAKIV0JM4dP1MTmiq/bv/NY0
bbfqvx msypz, ppi, tvxas . ahvi yzsc zsyxok, obtyqi, lbei . wreem
fmnxo zio, xbnlc, mtqve . zoy fcdtsi hiwyhe, fdp, rub . ntytnz
lyopch mopukp, rdiu, blpe . ezq npga wqsdz, tqbgf, xln .
Hi name is Jenny, a friend said you were really cool and said I should get in contact you with you! I love meeting new people, I also love to talk and show off my body. I just got my videocam working so you can see me to! It doesn't cost you anything if you wanna watch or talk to me! You don't
Microsoft Windows XP Professioynal 2002
Retail price: $270.99 Our low Pricqe: $50.00 You Save: $220.00
Adobe PhotoshRop 7.0
Retail price: $609.99 Our low Price: $60.00 You Savbe: $550.00
Microsoft Office XP Professional 2002
Retail price: $579.99 Our low Price: $60.00 You Savre:
Please use the font arial!
--- Trend GateLock [EMAIL PROTECTED] (higp11.gatelock.com.tw)
** corrected_doc.pif
Trend GateLock [EMAIL PROTECTED] (higp11.gatelock.com.tw)
** corrected_doc.pif WORM_NETSKY.AB
* Alexander Nagel [EMAIL PROTECTED] [2004-05-03 01:16]:
Code: Bad EIP value
0 Kernel panic: Attempted to kill init!
I don't think it is a problem of the debian installer because it worked
without any problem.
BTW, what is a EIP value??
Did 2.4 work? Can you try te 2.6.5 images from
Pool,#
Need affordable but reliable web hosting for only $5/month?
-800 MB Disk Space
-Unlimited email accounts
-FREE Shopping Cart... and much more!
Please contact us to take advantage of this new offer at
http://viewhostdeals.com
parvenu
Hi.
I downloaded some of the official sarge/testing CDs last week, and had a
bit of trouble with the installer recognising my CD-ROM drive.
I have a Toshiba Portege 3480 and its (TEAC) floppy is USB and its (TARGA)
CD-ROM is PCMCIA. I created the set of 4 floppies for install (boot, root,
CD
* Mike Surridge [EMAIL PROTECTED] [2004-01-30 12:15]:
Everything OK until running base-config after the reboot. Here base-config
seemed unable to track which steps had been completed. The first problem
was in configuring APT sources - in my case http using www.mirror.ac.uk. I
set these
* Anand Vaidya [EMAIL PROTECTED] [2004-01-26 14:44]:
Comments/Problems: Insert CD, boot from CD. I get the Lilo: prompt Language
selection. Select En-US and hit return. The machine locks up solid. I need to
pull powercord/battery to restart. Have tried with different ACPI flags,
boot-kbd
clone 229613 -1 -2
reassign -1 partman
retitle -1 Should complain if root is too small
severity -1 wishlist
reassign -2 netcfg
retitle -2 it should be possible to stop DHCP detection
severity -1 wishlist
thanks
* Magnus Ekdahl [EMAIL PROTECTED] [2004-01-25 20:05]:
* Installing packages until /
* Itai Seggev [EMAIL PROTECTED] [2004-01-27 11:55]:
The installer correctly identified the ethernet card as an e100, but failed to
load the kernel module. It wasn't clear to me if this is because the module
was is on the drivers floppy or if there was some sort of problem. Being that
the
* Matthias Barmeier [EMAIL PROTECTED] [2004-01-24 11:57]:
The welcome screen comes up after pressing ENTER boot started, but
screen goes black.
After reset I added the disable framebuffer parameter to linux boot. I
got the language selection screen, but the keyboard does not work.
CAPS-LOCK
* Erik Dykema [EMAIL PROTECTED] [2004-01-28 08:34]:
I can confirm this problem, with an HP Proliant DL360 G3. They use
the same drive controller, cciss i think.
As a short term workaround, you can use the auto-partition tool,
which will allow you to go a little
* Gary M. Witscher [EMAIL PROTECTED] [2004-01-26 20:28]:
I installed twice, and after the base install the system rebooted. The
reboot failed both times. The last message in the boot sequence was
similar to 'Detected two usb ports'. My machine only has one usb port.
At any rate I simply turned
* Alex Lian [EMAIL PROTECTED] [2004-05-02 20:08]:
Just tried. Still same problem, though it goes to a black screen instead
since the UI has been improved...
I'll try fiddling and removing hardware to see what helps.
What kind of kernel are you normally using? And this works?
--
Martin
* Sebastian Henschel [EMAIL PROTECTED] [2004-01-26 09:49]:
Comments/Problems:
- detect hard drives:
after loading ehci-hcd, the hardware detection had to be rerun. then i was
prompted to choose from the existing partitions on the scsi-drive. it seemed
like the ide-drive had vanished.
* Gianluca Amato [EMAIL PROTECTED] [2004-01-26 17:39]:
The LVM module did not work very well. I had to create manually a physical
volume with pvcreate. Moreover, I tried without success to install with the
root partition in LVM. The first part of the installation worked ok, but
Can you please
Just tried. Still same problem, though it goes to a black screen instead
since the UI has been improved...
I'll try fiddling and removing hardware to see what helps.
-Alex
On Mon, 3 May 2004 00:20:09 +0100, Martin Michlmayr [EMAIL PROTECTED]
said:
* Alex Lian [EMAIL PROTECTED] [2004-01-17
reassign 230241 console-data
rertitle 230241 problems with spanish keyboard
thanks
* Javi Castelo [EMAIL PROTECTED] [2004-01-29 13:39]:
1.- Spanish keyboard loaded during installation doesn't recognize very
important chars like ?. These chars are fundamentals in spanish
language.
* Jay Berkenbilt [EMAIL PROTECTED] [2004-01-26 19:37]:
Immediately after installation, /boot/grub/menu.lst had two entries --
a normal one and a recovery mode -- which were identical. After I did
apt-get update and apt-get dist-upgrade to upgrade to sid and then
installed a newer kernel
1. The installer first went to cfdisk. I created the partitions (1
ext3 (bootable), 1 swap), wrote the table, and selected finish. Then it
went to the next screen where I am supposed to configure/mount the
partitions, and instead of the list of my partitions (should have been
2), the
* Frank Lichtenheld [EMAIL PROTECTED] [2004-02-24 16:45]:
I use a pcmcia network card, but the PCMCIA bus was not correctly
configured (insmod of ds.o failed, because there was no socket driver
loaded), so the network didn't work. After the install I used modconf
to load the correct module and
* Jay Berkenbilt [EMAIL PROTECTED] [2004-01-26 19:01]:
I'm not sure why I got dropped into the main menu, but I'm glad I did
becuase the LILO/GRUB choice is important enough that I want to make
it explicitly.
Well, GRUB is installed by default now, but people can still go back
and use LILO
* root [EMAIL PROTECTED] [2004-01-29 15:31]:
Grub Boot loader installation hanged at grub-update, i have to kill it.
Lilo Bool loader installation worked fine.
This might be related to detecting a floppy drive... I think this has
been turned off now. Can you try the new beta4
* Brian R Drell [EMAIL PROTECTED] [2004-01-23 01:17]:
Comments/Problems: The install went very smoothly. I think that the
base-config could be simplified a great deal. I loved that the installer
easily found and installed the correct drivers for my hardware. The
base-config did not ask
* Andrew J. Perrin [EMAIL PROTECTED] [2004-01-23 12:54]:
This machine has an obscure problem with the CardBus hardware, which
means the kernel needs pci=assign-busses appended in order to use it
correctly. Therefore, although pcmcia started fine with the installer,
Do you know if this is fixed
* Matt Kraai [EMAIL PROTECTED] [2004-01-25 08:21]:
On Sun, Jan 25, 2004 at 03:21:53PM +0100, Holger Kubiak wrote:
After reboot I used grub to chainload /dev/hdb7. The installation was
good up to the moment of installing the kernel. I chosed several
kernel-versions (2.6, 2.6.0,
* Guillaume Lederrey [EMAIL PROTECTED] [2004-01-29 20:41]:
* The screen to create filesystems is a bit overloaded. The full path to
devices makes it a bit hard to read.
We're using a compltely new partitioning tool now.
* Base system install didnt work the first time, error log show that
reassign 229048 base-config
thanks
base-config comments out the APT line... I don't quite know why.
--
Martin Michlmayr
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
* George Kumengi [EMAIL PROTECTED] [2004-01-30 12:52]:
Everything works fine until it comes time to download. This is the error:
Debootstrap Error
Failed getting Release file
http://ftp.us.debian.org/debian//dists/unstable/Release.
Can you please try the new beta4 release to see if that
* Andrew Scott [EMAIL PROTECTED] [2004-05-03 10:49]:
I had to load CD-ROM #1 on another Debian install, find
kernel-pcmcia-modules-2.4.25-1-386 and dpkg --unpack it. Copy this onto
a disk, then boot off the floppies again.
Dropping into a shell, I copied the file into
Processing commands for [EMAIL PROTECTED]:
submitter 230436 Jesse Hammons [EMAIL PROTECTED]
Bug#230436: FWD: installing Sarge with F5D6050
Changed Bug submitter from Joey Hess [EMAIL PROTECTED] to Jesse Hammons [EMAIL
PROTECTED].
submitter 230437 Erik Dykema [EMAIL PROTECTED]
Bug#230437: FWD:
Processing commands for [EMAIL PROTECTED]:
reassign 230241 console-data
Bug#230241: installation-reports: Spanish keyboard doesn't configured
Bug reassigned from package `installation-reports' to `console-data'.
rertitle 230241 problems with spanish keyboard
Unknown command or malformed
Your message dated Sun, 2 May 2004 20:59:06 -0400
with message-id [EMAIL PROTECTED]
and subject line installation-reports: installation report
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now
Processing commands for [EMAIL PROTECTED]:
clone 229613 -1 -2
Bug#229613: Installation Report
Bug 229613 cloned as bugs 247044-247045.
reassign -1 partman
Bug#247044: Installation Report
Bug reassigned from package `installation-reports' to `partman'.
retitle -1 Should complain if root is
Your message dated Mon, 3 May 2004 01:30:20 +0100
with message-id [EMAIL PROTECTED]
and subject line Package: installation-reports
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your
And a scornful laugh laughed he. .Colder and louder blew the wind, .Seeing, shall take
heart again. .
Act, -- act in the living Present! .And the thoughts of youth are long, long
thoughts. .And banish the thoughts of day. .
Low Cost High Quality Medications: Your Quality of Life Decisions
Martin Michlmayr wrote:
* Alexander Nagel [EMAIL PROTECTED] [2004-05-03 01:16]:
Code: Bad EIP value
0 Kernel panic: Attempted to kill init!
I don't think it is a problem of the debian installer because it worked
without any problem.
BTW, what is a EIP value??
Did 2.4 work?
Package: installation-reports
Debian-installer-version: 2 May 2004
uname -a: unknown
Date: 3 May 2004
Method: Boot cd
Machine: IBM Thinkpad 600
Processor: P 300
Memory: 224Meg
Root Device: IDE
Root Size/partition table: 192Megs
Output of lspci: ?
Base System Installation Checklist:
Initial
* Gus Heck [EMAIL PROTECTED] [2004-02-24 11:47]:
I have wasted half a pack of CD's and 2 days trying different isos both
from debian installer and jigdo for the woody release. I am charged
with evaluating potential replacements for our soon-to-be-expensive
redhat install. The only
Hello! =)
This week I was invited for a University to do an install fest of
Debian, an because you did an excellent work writing the Installing
Debian GNU/Linux 3.0 for Intel x86 document, I prefered reduce and
adapt it for the workshop at the University.
However, because this is the first
Andrew Scott wrote:
I downloaded some of the official sarge/testing CDs last week, and had a
bit of trouble with the installer recognising my CD-ROM drive.
Last week means you probably got beta 3 of the installer.
I have a Toshiba Portege 3480 and its (TEAC) floppy is USB and its (TARGA)
* Roland Mas [EMAIL PROTECTED] [2004-04-04 17:32]:
When loading the ide-detect module, the kernel logs show that the hard
disk and CD-ROM drive are correctly detected, but then I get lots of
hda: lost interrupt (same with hdc). From then on, no hard disk or
CD-ROM access manages to get
* Pieter van der Eems [EMAIL PROTECTED] [2004-02-25 19:09]:
When trying to install in Dutch (Nederlands, Netherlands) without cd I had terrible
difficulties to install a system (I tried to install an unstable distro).
The install procedure kept going back to the menu option to detect
* [EMAIL PROTECTED] [EMAIL PROTECTED] [2004-02-25 15:20]:
The first part is well. It´s install the basic system and reboot.
but in this moment this new kernel is rebooting all the times.
Can you please try the new beta4 which uses an updated kernel.
See
* Margarita Manterola [EMAIL PROTECTED] [2004-02-25 14:21]:
The prompting for the following floppy is not friendly. A polite
and verbose message can be added quite easily.
I think this has been done.
* Config network:
The host's name was not configured (known problem)
Fixed.
* Marco Loewl [EMAIL PROTECTED] [2004-02-24 20:35]:
Alle Sage und Sid DVD ISO'S funktionieren nicht. Nur die Netzinstallation
funktioniert fehlerfrei !!
Konnen Sie die neue beta4 Version von
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/beta4/sarge-i386-netinst.iso
probieren?
--
* Gordon Heydon [EMAIL PROTECTED] [2004-05-03 09:28]:
1. Was not able to load up pcmcia network card.
Was this possible last time? What card is it? Can you please show
the putput of the commands lspci and lspci -n.
2. again when creating lvm disk pvcreate was not executed.
3. when
Robert Hughes wrote:
The grub installer detected my other Linux installations successfully,
but
it did not detect Windows XP on /dev/hda1. (Editing /boot/menu.lst
solved the
problem.)
It seems that apparently the last minute fix to the priority of the
ntfs-modules udeb was not done;
On Sun, May 02, 2004 at 10:48:53PM +0100, Colin Watson wrote:
On Sun, May 02, 2004 at 02:17:02PM -0400, Joey Hess wrote:
Martin Michlmayr wrote:
I'm working on d-i support for MIPS based Cobalt machines. These
don't have graphics cards, so you have to do the installation via the
Processing commands for [EMAIL PROTECTED]:
tags 224661 + pending
Bug#224661: please switch to lvm2
There were no tags set.
Tags added: pending
--
Stopping processing here.
Please contact me if you need assistance.
Debian bug tracking system administrator
(administrator, Debian Bugs database)
clone 246841 -1
reassign 246841 partman-newworld
retitle 246841 partman-newworld: doesn't set filesystem properly
thanks
On Sun, May 02, 2004 at 10:46:56PM +0100, Colin Watson wrote:
On Sun, May 02, 2004 at 09:47:37PM +1000, Jonathan Matthew wrote:
On Sun, May 02, 2004 at 11:40:08AM +0100,
Anti-aging formula that does wonders
This formula does miracles to your body
Does wonders against:
Baldness,Gray Hair,Wrinkles,Weight Gain and more
See all about it:
http://www.summershapes.biz/
ToRemoveClickHere
http://www.summershapes.biz/remove.php
Hello,
On Mon, 2004-05-03 at 11:43, Martin Michlmayr wrote:
* Gordon Heydon [EMAIL PROTECTED] [2004-05-03 09:28]:
1. Was not able to load up pcmcia network card.
Was this possible last time? What card is it? Can you please show
the putput of the commands lspci and lspci -n.
I am not
Joey,
However, the CD-ROM could not be recognised. In the set of modules on
the two drivers disks, the required ide/legacy/ide-cs.o file was missing.
This was added to the CD in beta4.
Are you saying it was added to the CD driver floppy? That would be right.
Missed it by a week. :)
Can
On Mon, 3 May 2004 01:13:44 +0100, Martin Michlmayr [EMAIL PROTECTED]
said:
* Alex Lian [EMAIL PROTECTED] [2004-05-02 20:08]:
Just tried. Still same problem, though it goes to a black screen instead
since the UI has been improved...
I'll try fiddling and removing hardware to see what
Andrew Scott wrote:
Are you saying it was added to the CD driver floppy? That would be right.
Missed it by a week. :)
No, it was added to the CD itself.
Yes - I have to boot from floppies. The Portege 3480 does support booting
from CD, but I think last time I tried to boot Debian from CD it
Joey Hess wrote:
It seems that apparently the last minute fix to the priority of the
ntfs-modules udeb was not done; probably my request to the ftp-master
was lost amoung all the other changes.
I've checked, and the udeb is listed at extra priority on the CD.
And has the correct priority in
I wrote:
Don't try for such a perfect and well-tested release.
Require successful installs on all arches and major platforms before
freezing.
The two options above are unappealing, and hard, so I'm leaning toward
this one:
Swtich to testing-style udeb propigation.
It would really
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.7.95.1
reassign 247006 installation-reports
Bug#247006: Sarge Installer hangs
Warning: Unknown package 'images'
Warning: Unknown package 'initird.gz'
Warning: Unknown package 'vmlinuz'
Hi everyone,
I'm planning to do some massive hacking on the installation manual,
and I'm wondering how the translators would like me to proceed. I plan
to do some pretty serious editing, deleting portions completely and
adding significant text to other sections, as well as moving lots of
what's
hi!
i got also this problem and i also use smart boot manager as my boot loader. i think
parted got a problem with sbm. here is my info:
muzdeb:~# cat /proc/partitions
major minor #blocks name
3 0 2920 hda
3 17812976 hda1
3 29766008 hda2
3 3
Good afternoon.Let us not be ashamed to speak what we shame not to think.
Low rates on Software
Looking for not expensive high-quality software?
We might be just what you need.http://makimono.sales-outlets.net
We can ship worldwide.Men's fame is like their hair, which grows after they are dead,
Il Mon, May 03, 2004 at 12:30:03AM -0400, David Nusinow ha scritto:
Hi everyone,
I'm planning to do some massive hacking on the installation manual,
and I'm wondering how the translators would like me to proceed. I plan
to do some pretty serious editing, deleting portions completely and
1 - 100 of 104 matches
Mail list logo