H, I don't think this closing is appropriate :
The subject of bug #280126 is installation-reports: success (Dell
Optiplex GX280 + kernel-2.4.27 + IDE)
In this bug report I stated that:
- the installation was without pb with kernel 2.4.27 + PATA mode.
- the installation didn't work with
Fabrice LORRAIN wrote:
...
uname -a:
Linux fabtest3 2.4.27-1-386 #1 Fri Sep 3 06:24:46 UTC 2004 i686 GNU/Linux
Yeck !! This is wrong (bad cut and paste). Those installations were with
2.6 and expert2.6 aka kernel 2.6.8-1.
This problem is still present with
Erich Waelde a écrit :
please add
- raidsupport
the md-modules are already available (used by the lvm-stuff), and
should be useful without further modification I think. So that
would need a raidtools2 udeb or similar and a config dialog to
create /etc/raidtools.
Steve Langasek a écrit :
On Sun, Jan 11, 2004 at 11:24:56PM +0100, Fabrice Lorrain (home) wrote:
Sarge.
dowload location :
people.d.o/~manty/testing/netinst/powerpc/20040109/sarge-powerpc-netinst.iso
download date : provided in the subject (20040109)
It may not make a difference in this case
Thorsten Sauter a écrit :
Hello debian-installer's :-),
I have setup daily images for the HPPA architecture on paer.debian.org.
The images creates cdrom, netboot and a lif image from source. As
usually everything is available here:
http://people.debian.org/~tsauter/d-i/images-hppa/daily/
Hi,
I did a couple of cdrom-install this afternoon (netinst image). Not much
to say (everything was ok) except for the pb with the arabic line in
language-chooser. This ligne is back to a bunch of ? (This pb
doesn't show up on the powerpc-netinst-20040109).
@+,
Fab
--
To
Hi,
Not much to say, I tryed the netinst-cdrom and it still fails on the
libopencdk4 download.
Whishlist :
Could someone add a net target on the powerpc-cdrom.
@+,
Fab
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Gaudenz Steinlin a écrit :
Am Son, den 11.01.2004 schrieb Fabrice Lorrain (home) um 21:13:
Hi,
Not much to say, I tryed the netinst-cdrom and it still fails on the
libopencdk4 download.
Did you use the sarge or the sid images (don't know if they differ on
powerpc tough)? Please provide download
Fabrice Lorrain (home) a écrit :
Hi,
Not much to say, I tryed the netinst-cdrom and it still fails on the
libopencdk4 download.
Now using the businesscard image from :
http://people.debian.org/~manty/testing/netinst/powerpc/20040109/sarge-powerpc-businesscard.iso
This image doesn't set
Fabrice Lorrain (home) a écrit :
wishlist :
Can someone provide kernel+tftpboot image for the archs where d-i is in
a testing state ?
Replying to myself :
They are at the regular place :
ftp://ftp.debian.org/debian/dists/sid/main/installer-*
Fab
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
Hi,
Ibook G3, 233Mhz. I was unable to boot on cdroms (3 differents RW CDs
tested, with yesterday {netinst,businesscard} image and
20031230-businesscard). Not sure it's d-i fault on that one.
G3 tower, same 3 CDs. I got as far as the yaboot prompt on the three but
I was unable to boot with a
Fabrice Lorrain (home) a écrit :
At the origin, I wanted to do an install on my G4 but I'm stuck in
OpenFirmware (see my post in d-powerpc).
I did succeed in booting a 20040103-netinstall image on the G4.
But I got hit bye the libopencdk4 bug in the base système install step.
/etc/resolv.conf
Joey Hess a écrit :
Fabrice Lorrain (home) wrote:
Joey Hess a écrit :
...snip ...
I forgot; the file I need was renamed to /var/log/base-config.log
Hi,
Out of curiosity, how do you use/read this file ?
This file is a log, taken with 'script' of everything that appeared on
the screen during
Joey Hess a écrit :
...snip ...
I forgot; the file I need was renamed to /var/log/base-config.log
Hi,
Out of curiosity, how do you use/read this file ?
@+,
Fab
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hi all,
Since gluck is still down, any place where I can download di-beta1 or
daily build iso images ?
Thanks,
Fab
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Martin Sjögren a écrit:
Hello.
I want us to really decide on how i18n is going to work in d-i since
it's something that may cause big design changes.
There are several things that need translating:
- Debconf templates. These are not a problem, we happily use po-debconf
for this and everything is
Eduard Bloch a écrit:
#include hallo.h
* Adam Di Carlo [Thu, Jan 09 2003, 09:59:14AM]:
2. http://support.intel.com/support/network/adapter/index.htm
As for the issue of the shipped EEPro, are you using the bf2.4 to boot
with or no? This seems like an issue with the stable kernel-source-*
Package: boot-floppy
Version: 3.0.18-2001-12-21
Severity: grave
Doing a french install on a Mac G4 (powermac), I can not
partition the hard drive (back to the previous menu).
Running fdisk or mac-fdisk manually give :
mac-fdisk: 1: Syntax error: ( unexpected
Also on my i386, chroot in the
[no CC, thanks]
Hi,
I tried to install woody (bf 3.0.17) on a G4 this weekend.
harware : G4, 400Mhz, 1Go RAM, 2 ide harddrives
First try: using an USB floppy drive...
Doesn't seem to be supported. Might be nice if it were
written in the woody install manual.
2nd try: network boot
hmmm, boot
D. Andrew Pease wrote:
I searched through the mail list archives for answers to a question
that I am sure has been answered before, but without luck.
I would like to install Debian on a rack of Dell PowerEdge 2450
servers. These machines use an Adaptec AIC-7866 SCSI Raid controller
card
20 matches
Mail list logo