Am Fri, 10 Aug 2018 11:00:31 -0400
schrieb lsore...@csclub.uwaterloo.ca (Lennart Sorensen):
> On Fri, Aug 10, 2018 at 10:08:52AM +0200, Herbert Kaminski wrote:
> > Am Thu, 9 Aug 2018 14:14:15 -0400
> > schrieb lsore...@csclub.uwaterloo.ca (Lennart Sorensen):
> >
> &g
Am Thu, 9 Aug 2018 14:14:15 -0400
schrieb lsore...@csclub.uwaterloo.ca (Lennart Sorensen):
> [...]
> Well 99.9% of installs don't have another linux on the system,
^
Interesting. How did you get that figure?
Regards,
Herbert
ts are still found on
ftp.de.debain.org, and security.debian.org still works too.
Regards,
Herbert
--
Herbert Kaminski D-26122 Oldenburg
On Fri, 31 Oct 2014 11:41:51 +0100
Herbert Kaminski herbert.kamin...@gmx.de wrote:
- in XFCE, all menu entries or buttons to shutdown, reboot etc are greyed,
and the notification area in the panel is only a vertcal bar. On the same
hardware, I installed linux/XFCE and then removed
. Thanks.
Just tested the netinst daily image as of 2014-10-31:
dhcp now works again in the installer.
Regards,
Herbert
--
Herbert Kaminski D-26122 Oldenburg
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
.
This is new with kernel 10.1.
So, kFreeBSD on the desktop is usable after some manual intervention, if you
do not use a NVidia graphics card.
--
Herbert Kaminski D-26122 Oldenburg
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
On Fri, 31 Oct 2014 13:44:25 +0300
Michael Tokarev m...@tls.msk.ru wrote:
31.10.2014 13:42, Herbert Kaminski wrote:
Just tested the netinst daily image as of 2014-10-31:
dhcp now works again in the installer.
Is it on kfreebsd, or on linux kernel too? I wonder maybe we should
switch
are the same in jessie and sid: 0.3.9~pre1.20080208-9.
Regards,
Herbert
--
Herbert Kaminski D-26122 Oldenburg
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org
On Sun, 21 Sep 2014 23:49:52 +0200
Herbert Kaminski herbert.kamin...@gmx.de wrote:
After installing the daily build as of 2014-10-24 on very similar hardware,
here is some additional info:
Installation itself was OK, with some errors in the installed system:
- grub-install did not recognize
On Thu, 23 Oct 2014 01:41:32 +0100
Steven Chamberlain ste...@pyro.eu.org wrote:
Herbert Kaminski wrote:
Had to switch to VT1 and log in as root, su in the
XTerm was unsuccessful
Well, this was the consequence of a different bug: the terminal in XFCE
uses the US keyboard mapping, not DE
and that are not
directly installation problems. So kernel 10.1 solved none of the problems
for me.
Regards,
Herbert
--
Herbert Kaminski +49-441-5090133
Memeler Str. 4 26122 Oldenburg
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of unsubscribe
On Sun, 21 Sep 2014 23:49:52 +0200
Herbert Kaminski herbert.kamin...@gmx.de wrote:
- console (Alt-F1) used DE keymap, but no way to compose special
characters like backslash or @ with AltGr+key
Meanwhile, I tried many combinations in dpkg-reconfigure
keyboard-configuration. At last, I
On Tue, 23 Sep 2014 14:08:07 +0100
Steven Chamberlain ste...@pyro.eu.org wrote:
On 14:52, Herbert Kaminski wrote:
Unfortunately, the output of aptitude search xserver-xorg-video does not
show any xserver-xorg-video-nv or -noveau or anything else for NVidia.
That's because
On Sun, 21 Sep 2014 23:49:52 +0200
Herbert Kaminski herbert.kamin...@gmx.de wrote:
- german keymap is mostly OK, except Y and Z are exchanged (as in US map)
That turned out to be my own fault: I just selected the wrong entry from the
list of german keyboard layouts (XFCE desktop).
Regards
On Tue, 23 Sep 2014 00:14:44 +0100
Steven Chamberlain ste...@pyro.eu.org wrote:
On 23:49, Herbert Kaminski wrote:
00:12.0 VGA compatible controller [0300]: NVIDIA Corporation C68 [GeForce
7025 / nForce 630a] [10de:053e] (rev a2)
- X server did not recognize optimal screen resolution
, mounting the ufs2 file system and copying the
relevant parts of the grub.cfg on the BSD system into linux' 40_custom
and running update-grub again. This way, I was able to boot into kFreeBSD.
Regards,
Herbert
--
Herbert Kaminski D-26122 Oldenburg
--
To UNSUBSCRIBE, email to debian-boot-requ
a NTFS bitmap. But I can mount the VFAT filesystem of an USB stick
So, to be usable for day to ay work, kFreeBSD needs some polish
--
Herbert Kaminski D-26122 Oldenburg
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
On Mon, 27 May 2013 13:15:50 -0400
Lennart Sorensen lsore...@csclub.uwaterloo.ca wrote:
[...]
Debian asks if you want to install to the MBR.
DI asks if you want to install grub into the MBR of the disk or a
partition, and if you select to install it into your Linux partition,
it tells you
Package: installation-reports
Boot method: Netinst iso dd'ed to USB stick
Image version: wheezy RC1
Date: 22-FEB-2013 21:00 UTC
Machine: Toshiba A100 notebook
Processor: Intel Centrino
Memory: 3GByte
Partitions: guided partitioning - whole disk (1 TByte)
Output of lspci -knn (or lspci -nn): see
On Wed, 28 Nov 2012 12:43:49 +
Brian Potkin claremont...@gmail.com wrote:
1. Before or just after configuring the keyboard get a terminal with
ALT F2.
2. Then
nano /bin/mountmedia/
3. Find
PARTITION_TYPE=$(blkid -p -s PART_ENTRY_TYPE $1 | cut -d ' '
-f 2 | cut
Package: installation-reports
Boot method: netinstall, dd'ed to USB stick, text mode
Image version:
http://cdimage.debian.org/cdimage/wheezy_di_beta4/i386/iso-cd/debian-wheezy-DI-b4-i386-netinst.iso
Date: 25-NOV-2012 20:00 GMT
Machine: Toshiba Satellite A100
Processor: Intel Core2 duo
Memory:
Package: installation-reports
Boot method: netboot
Image version:
http://d-i.debian.org/daily-images/i386/daily/netboot/debian-installer/i386/
Date: 2012-09-24
Machine: made from parts
Processor: Atlon 64
Memory: 1 GByte
Partitions: swap, /boot and /, and spre room for another OS
Output of
to be the only problem of wheezy, at least for me.
Thanks for your good work!
Herbert
--
Herbert Kaminski Dipl.Phys.
Memeler Str. 4 26122 Oldenburg
Fon: 0441-9558938 Fax: -9558939
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of unsubscribe. Trouble
On Wed, 08 Aug 2012 07:40:11 +0100
Roger Lynn ro...@rilynn.me.uk wrote:
Absolutely agreed. I wouldn't hope to see this fixed for Wheezy -
even just changing the wording of the text requires an enormous
amount of work at this stage - it's just frustrating to see it
apparently being dismissed
On Sun, 4 Dec 2011 10:43:17 -0800
Pa Blum prr.4...@gmail.com wrote:
Are you guys going to help me or ain't you?
Not that I am one of you guys, but I can predict that if you
do not tell them more precisely what you tried to install,
they cannot help you. There is a nice template at:
On 21.01.2011 18:18, Debian Bug Tracking System wrote:
Thank you for filing a new Bug report with Debian.
...but apparently the attachments were too big, so it never hit the
mailing list. I resend this bug report without the attachments:
Stephen Conrad schrieb:
Networking: Realtek RTL8111DL (integrated, wired)
...
...installer...requesting that rtl8168d-1.fw and rtl8168d-2.fw
be provided
I have successfully run several installation tests on a similar
board with the RTL8111 chip onboard:
output of lspci -nn:
02:00.0
Adam Nielsen schrieb:
I configured all the partitions (mostly by accepting the
existing software-RAID configuration and leaving it unchanged except for
reformatting everything.)
After this the main menu came up with Configure MD devices which I
selected, and half an hour later it's still
Package: installation-reports
Boot method: daily netboot image for i386, minimal install
Image version:
http://people.debian.org/~joeyh/d-i/images/daily/netboot/debian-installer/i386/
as of 25-DEC-2010
Date: 26-DEC-2010
Machine: made from parts, MoBo Asus A7V133
Processor: AMD Athlon 900
Rick Thomas schrieb:
2) if reformatting is necessary or desired, have the option (default) of
preserving the UUID.
This would be an useful option for all partitions, not only for swap,
for people like me who dare to test DI in a spare partition of their
normal workstation.
cu
Herbert
--
Package: installation-reports
Boot method: Beta2 amd64 DVD, selected desktop KDE, text-mode installation
Image version:
http://cdimage.debian.org/cdimage/.squeeze_beta2/amd64/jigdo-dvd/debian-testing-amd64-DVD-1.jigdo
Date: 04-DEC-2010
Machine: made from parts, MoBo Gigabyte
Processor: AMD
Package: installation-reports
Boot method: Beta1 (RFT) i386 DVD
Image version:
http://cdimage.debian.org/cdimage/.squeeze_beta1/i386/jigdo-dvd/debian-testing-i386-DVD-1.jigdo
Date: 17-OCT-2010
Machine: made from parts, MoBo Gigabyte
Processor: AMD Athlon64 X2 5050e 2.6 GHz
Memory: 4 Gbyte RAM
Otavio Salvador schrieb:
Herbert, can you reproduce it? We need more information and the syslog
file of the installer (gzipped) so we can identify where it is
failing.
Sorry, the old files are gone, and I am just about to leave
for a two weeks vacation. I will try to reproduce the bug
when I
Package: installation-reports
Boot method: businesscard cd
Image version:
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-businesscard.iso
Date: 06-MAR-2010 18:00
Machine: made from parts
Processor: Athlon XP 1800+
Memory: 1GByte
Partitions:
Package: installation-reports
Boot method: amd-64 netinst CD
Image version:
http://cdimage.debian.org/cdimage/lenny_di_rc2/amd64/iso-cd/debian-Lenny-DI-rc2-amd64-netinst.iso
Date: 2009-02-03
Machine: made from parts
Processor: AMD Athlon64 X2 (5050e)
Memory: 4GiByte
Partitions: everything
Package: installation-reports
Boot method: amd-64 businesscard CD
Image version:
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/
AMD64/iso-cd/debian-testing-amd64-businesscard.iso
Date: 2009-01-28 T 18:15
Machine: made from parts
Processor: AMD Athlon64 X2 (5050e)
Memory:
Package: installation-reports
Boot method: netinst CD w. beta 2 of lenny
Image version:
http://cdimage.debian.org/cdimage/lenny_di_beta2/i386/iso-cd/debian-LennyBeta2-i386-netinst.iso
Date: 28-JUN-2008 19:45 CEST
Machine: made from parts
Processor: AMD Sempron 1600 (64bit)
Memory: 512 M
On Tue, 5 Dec 2006 08:44:29 +0100, Jens Seidel wrote:
...append line to preseed locale and keyboard settings in isolinux.cfg
...
append debian-installer/locale=de_DE \
kbd-chooser/method=de-latin1-nodeadkeys \
file=/cdrom/preseed/install.seed \
On Wed, 29 Nov 2006 15:45:16 +0100, Attilio Fiandrotti wrote:
if you have a laptop could you give this iso a try and
report how the touchpad works? (mini_synaptics_ville.iso)
On a Dell Inspiron with Synaptics touchpad, it works pretty well
(speed and tapping).
regards
Herbert
--
To
Package: installation-reports
INSTALL REPORT
Debian-installer-version: sid daily netinst iso as of 2004-12-19 from
http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/sparc/current/
uname -a: forgot to look for this, did a new install already
Date: 2004-12-21 23:30 CEST
Method: typing 'boot
On Wed, 22 Dec 2004 16:14:38 +0100, Herbert Kaminski wrote:
Just noticed that tasksel seems to be gone. Bug? Feature?
Could not reproduce this: on a new install with today's iso,
tasksel was there again.
cu
Herbert
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
On Sat, 27 Nov 2004 23:23:32 +0100, Herbert Kaminski wrote:
Second stage fails with:
error: Unable to switch charset mapping to ISO-8859-15 with terminal
'pseudo'
warning: disabling unsupported locale '[EMAIL PROTECTED]'.
Configuring the base system...
and restarting second stage
Package: installation-reports
INSTALL REPORT
Debian-installer-version: rc-2
uname -a: did not get that far
Date: 2004-10-04 23:30 CEST
Method: netinst iso, 'Linux' from serial console
Machine: Sun Ultra5
Processor: 270 MHz
Memory: 64 MByyte
Root Device: /dev/hda
Root Size/partition
On Sun, 28 Nov 2004 00:06:43 +0100, Geert Stappers wrote:
(I think this was reported earlier, but I was unable to find this bug in the
BTS)
Mayby:
Bug#263137: rootskel: serial console won't accept other languages
Thanks for the hint! I checked it and, yes, that bug shows up too when I
Package: installation-reports
Installed RC2 on a brand new computer from german computer chain VOBIS.
While kernel 2.4 hangs while detecting the hard drive,
2.6 completes the installation without apparent problems.
Debian-installer-version: businesscard iso of rc2 from
On Wed, 24 Nov 2004 08:20:11 -0500, Joey Hess wrote:
Herbert Kaminski wrote:
Installed RC2 on a brand new computer from german computer chain VOBIS.
While kernel 2.4 hangs while detecting the hard drive,
2.6 completes the installation without apparent problems.
Do you remember what kernel
On Wed, 24 Nov 2004 17:11:14 +0100, Herbert Kaminski wrote:
This box has a built-in multi-cardreader on USB. .
[...]
Could this be the real reason?
1. I just opened the box, pulled out the cable to the card reader
and tied to reinstall 2.4: still hanging at the same point.
2. I tried my
On Tue, 16 Nov 2004 11:44:36 +0100, Ralph Seichter wrote:
b) Using Apache to serve http://localserver.mydomain/debian/cd1/.
I copied Sarge CD 1 to this local directory.
^^
Where did you get this from? As far as I know, there is no official
Sarge CD set.
Obviously, there is a
On Mon, 15 Nov 2004 12:02:16 +0100, Ralph Seichter wrote:
Christian Perrier wrote:
I'm suspecting some more general problem as there has been at least
another report with hard disk not found recently.
Maybe I made a mistake with my choice of the Installation Kernel? I
have downloaded
like your's,
Regards,
Herbert Kaminski
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Sat, 16 Oct 2004 04:34:16 -0700 (PDT), Bill Jones wrote:
All daily CDs fail for various reasons. The closest, READ most
successful is found at -
ftp://http.us.debian.org/debian/dists/sarge/main/installer-sparc/rc1/images/
However, during expert mode, while trying to select a Kernel to
On Wed, 13 Oct 2004 17:04:32 -0400, Joey Hess wrote:
Herbert Kaminski wrote:
[...]
2. in tasksel, installing the desktop task fails (I did not find a
log file with the details, but then I got no clue where to look
for it);
If you run tasksel install desktop at the command line, you
Using the netboot files 'initrd.gz' and 'linux' as of 13-OCT-2004 from
http://people.debian.org/~joeyh/d-i/images/daily/netboot/debian-installer/i386/2.6/
worked fine: all bugs reported in 246999 are fixed. Found a different
bug that I will report about separately.
Herbert
--
To
actually, I have no longer access to that hardware, but the bugs
were not specific to this notebook. On my own notebook, none of
the bugs in this reports shows up.
Herbert
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
That bug was fixed on 16. of April already, so I did not test
again with today's ISO. Installing with only 16 MByte is really
too much pain...
Herbert
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I cannot test this on sparc32, but on sparc64 with ISOs as of 2004-10-13,
all bugs in this report are fixed
Herbert
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Both bugs in this report are long since fixed.
Herbert
P.S. I should find out how I can close my reported bugs myself.. :-]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I tried to test installation on Sparc classic (sparc32) with the netinst
iso from http://cdimage.debian.org/pub/cdimage-testing/daily/sparc/current/
as of 2004-10-14, but it stops booting after trying to load the initrd.
Using the netboot images from
Package: installation-reports
Bug#274958 apparently is fixed in debian-installer 2004-10-12,
but second stage shows some errors on my Sparc Ultra5:
1. after reboot, the installer complains about read-edid not
being available;
2. in tasksel, installing the desktop task fails (I did not find a
On Sat, 9 Oct 2004 17:42:59 +1000 (EST), Vincent McIntyre wrote:
Debian-installer-version:
netinst 20041007 from
I have seen a similar boot problem with my Ultra5 for several days.
This was fixed with next day's (2004-10-08) businesscard iso.
Later on, however, the installer is unable to mount
On Mon, 04 Oct 2004 20:49:22 -0700, Joshua Kwan wrote:
looks like initrd is slightly too big?
It sure is. We need some debian-cd firepower here. Manty, can you
s/8192/16384/ in all the silo.conf files in debian-cd?
I had a look into the silo.conf of that iso. I found no
size statement for the
Joshua,
Herbert, do you have time to try the miniiso image?
I just tried the 2.4 miniiso dated 04-OCT-2004 (only first stage),
and it installs fine.
Thank you for your help
Herbert
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
Package: installation-reports
INSTALL REPORT
Debian-installer-version:
http://cdimage.debian.org/pub/cdimage-testing/daily/sparc/current/
dated 04-OCT-2004
uname -a: did not get that far
Date: 2004-10-04 23:30 CEST
Method: businesscard iso, just hitting 'ENTER'
Machine: Sun Ultra5
Package: installation-reports
INSTALL REPORT
Debian-installer-version: pre-rc2 sarge-i386-businesscard.iso
uname -a: Linux alfred 2.6.6-1-k7 #1 Wed May 12 18:19:40 EST 2004 i686 GNU/Linux
Date: 2-OCT-2004 16:00
Method: boot from CD, entering 'linux26', packages from
ftp.de.debian.org
Package: installation-reports
INSTALL REPORT
Debian-installer-version:
http://cdimage.debian.org/pub/cdimage-testing/daily/sparc/pre-rc2/
dated 01-OCT-2004
uname -a: did not get that far
Date: 2004-10-01 22:30 CEST
Method: netinst iso (same with businesscard)
Machine: Sun Ultra5
Hi,
correcting a minor error in the original report:
uname -a: did not get that far
uname -a: Linux (none) 2.4.27-1-sparc64 #1 Mon Aug 23 23:59:55 PDT 2004 sparc64 unknown
Herbert
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
On Wed, 15 Sep 2004 02:35:45 +0200, Andreas Schuldei wrote:
i read this
http://d-i.alioth.debian.org/manual/en.i386/ch04s06.html
and looked at the files here:
http://ftp.debian.org/debian/dists/sarge/main/installer-i386/current//images/netboot/
and it is not clear to me how the given files are
Package: installation-reports
INSTALL REPORT
Debian-installer-version:
http://cdimage.debian.org/pub/cdimage-testing/daily/sparc/current/
dated 13-SEP-2004
uname -a: Linux dyna06 2.4.26-sparc64 #1 Sun Jun 20 02:39:17 PDT 2004 sparc64 GNU/Linux
Date: 2004-09-14 01:30 CEST
Method:
On Sun, 25 Jul 2004 13:57:57 -0400, Joey Hess wrote:
I've also went for the quick fix approach for now, and changed
i386/amd64 2.6 to put it in nic-modules. I made
kernel_specific/2.6/nic-modules pull in firewire-core-modules, which
affects i386, amd64, and (some) powerpc, mostly the netboot
On Fri, 23 Jul 2004 01:47:47 +, Andre Felipe Machado wrote:
edit the /etc/network/interfaces
include the 2 following lines:
auto lo
iface lo inet loopback
[...]
It should be included before the sarge release.
Thats exactly what is in the file created during my test
install yesterday
Hi Anton,
...this bug seams to be there since version 22 of
partman-basicfilesystems (11 Apr 2004 !). If there was at least one bug
report about this problem, I would fix it.
On my desktop machine (512 MB of RAM), I am running sarge with KDE
for weeks now without even noticing the lack of
On Wed, 21 Jul 2004 13:14:12 -0400, Joey Hess wrote:
On my system, ethernet is brought up by discover, while firewire is
brought up by hotplug, and they run in that order, which is the same
order the installer brings them up, so I get the same interfaces. Is
your system doing something different,
Package: installation-reports
Debian-installer-version:
sarge-i386-businesscard.iso 19-Jul-2004 14:31 40.2M
downloaded 19-JUL-04 23:30 UTC from
http://gluck.debian.org/cdimage/testing/sid_d-i/i386/current
Method: 'linux26'
network connection through local HTTP proxy to ftp.de.debian.org
Hi,
I downloaded initrd.gz and vmlinuz as of 08-JUL-04
and installed 2.6/unstable again. With the newer
files, all bugs from the original report are fixed.
During 2nd stage, the new keymap configuration screens
are untranslated.
In tasksel, choosing 'manual selection' and then
leaving aptitude
On Fri, 9 Jul 2004 19:26:03 +0200, Christian Perrier wrote:
Quoting Herbert Kaminski ([EMAIL PROTECTED]):
[...]
loads and installs tons of packages including X.
[...]
Did you install in German.
Yes indeed.
[...]
This bug has been reported to tasksel already.
OK then please excuse the noise
On Tue, 6 Jul 2004 06:53:47 +0200, Christian Perrier wrote:
Quoting Herbert Kaminski ([EMAIL PROTECTED]):
[...]
Machine: plain vanilla i386 from parts
Processor: AMD K6-2 500MHz
Memory: 96MB
Root Device: 40GB IDE /dev/hdb1
Root Size/partition table: 39GB ext3 on hdb1, 512 MB swap on hdb5
On Wed, 07 Jul 2004 15:34:56 +0800, John wrote:
Even if bandwidth didn't cause problems, the fact that it downloads so
much junk means I can't install in 64 Mbytes.
This must be a problem of your special setup. Using the files
'netboot.initrd.gz' and 'vmlinuz' from
correction to my mail just sent a few minutes ago:
the files I download are vmlinuz and initrd.gz, not
netboot.initrd.gz
sorry ;-)
Herbert
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: installation-reports
Debian-installer-version: netboot from
http://p.d.o/~joeyh/d-i/images/daily/netboot
and
http://p.d.o/~joeyh/d-i/images/daily/netboot/2.6
downloaded 05-JUL-2004 at 22:00 UTC
uname -a: The result of running uname -a on a shell prompt
Date: 05-JUL-2004
Method: netboot,
Package: installation-reports
Debian-installer-version: sarge_d-i and sid_di:
sarge-i386-netinst.iso 01-Jul-2004 22:22 104M
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/current/
downloaded 2-JUL-04 14:30 UTC
sarge-i386-businesscard.iso 02-Jul-2004 14:13 39.1M
On Sat, 3 Jul 2004 13:14:11 +0100, Colin Watson wrote:
On Sat, Jul 03, 2004 at 01:17:36PM +0200, Herbert Kaminski wrote:
to install kernel 2.6.6-k7-smp, although /proc/cpuinfo clearly
states K6 cpu. Consequently, after reboot the system resets as
soon as the kernel is loaded.
Could you please
On Sat, 19 Jun 2004 23:30:47 +0200, Frans Pop wrote:
tags 255077 + moreinfo unreproducible
thanks
On Friday 18 June 2004 18:42, Herbert Kaminski wrote:
Kernel 2.6.6 was selected, but 2.4.25 was installed,
so in stage 2 no module was found, networking failed,
installation could not finish
On Sun, 20 Jun 2004 08:53:24 +0200, Christian Perrier wrote:
Quoting martin f krafft ([EMAIL PROTECTED]):
I have tried three times now with sid_d-i and it definitely works
for me. However, I am using the CD-ROM as install medium. Trying
with mirror download now...
Let's ask the bug submitter
On Sat, 19 Jun 2004 14:28:30 +0100, Martin Michlmayr wrote:
* Herbert Kaminski [EMAIL PROTECTED] [2004-06-18 18:42]:
Kernel 2.6.6 was selected, but 2.4.25 was installed, so in stage 2
no module was found, networking failed, installation could not
finish.
This *might* be because 2.6.6
Hi Dennis,
After the installation, the font on the textmode console was
wrong too.
On the whole console?
Yes, all characters 7bit seem to be wrong: Umlaute,
line drawing characters in midnight commander. So
this problem is no translation error, but a wrong
character set.
Regards
Herbert
Package: installation-reports
Debian-installer-version: daily build:
sarge-i386-netinst.iso 16-Jun-2004 14:26 106M
downloaded 18-JUN-04 16:10 from
http://gluck.debian.org/cdimage/testing/sid_d-i/i386/current/
uname -a: Linux dellnote 2.4.25-1-386 #1 Tue Feb 24 ...
Date: 18-JUN-04 18:00
Package: installation-reports
on my Sparc Classic with only 16 MByte of RAM,
sarge-sparc-businesscard.iso 28-May-2004 22:23 20.3M from
http://cdimage.debian.org/pub/cdimage-testing/daily/sparc/current/
downloaded 29-MAY-2004 00:10
fails to boot. d-i's last words are:
On Thu, 27 May 2004 13:33:29 -0300, Martin Michlmayr wrote:
* Herbert Kaminski [EMAIL PROTECTED] [2004-05-24 14:27]:
Other bugs: - the full name of the first user is requested twice
in the mask
This might be fixed; it's definitely a known problem.
In sid-di, indeed it is fixed
On Thu, 27 May 2004 13:32:26 -0300, Martin Michlmayr wrote:
* Herbert Kaminski [EMAIL PROTECTED] [2004-05-24 14:47]:
(1)OS-prober correctly recognized the linux on hda as SuSE 9.0 and
the Win98 on hda and WinXP on hdc, but misinterpreted the OS/2 on
hda as yet another Win98/ME/2000. However
On Thu, 27 May 2004 18:10:25 -0300, Martin Michlmayr wrote:
* Herbert Kaminski [EMAIL PROTECTED] [2004-05-27 22:17]:
Well, if you see the abiguous partition type 10 (I believe) and cannot
mount it as NTFS, then it is probably HPFS and that means OS/2. It
Can Linux read HPFS partitions
Package: installation-reports
Debian-installer-version: 22-MAY-2004 from
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/current/sarge-i386-
netinst.iso
uname -a: Linux debian 2.6.5-1-386 #2 Fri Apr 30 20:13:30 EST 2004 i686 GNU/Linux
Date: 23-MAY-04 12:00
Method: boot from cdrom
Package: installation-reports
INSTALL REPORT
Debian-installer-version: sarge-i386-businesscard.iso 22-May-2004 14:40 50.0M
from http://gluck.debian.org/cdimage/testing/sid_d-i/i386/current/ ,
downloaded 23-MAY-2004 18:30
uname -a: Linux alfred 2.6.6-1-k7 #1 Wed May 12 18:19:40 EST 2004
On Wed, 21 Apr 2004 22:38:02 +0200, Per Olofsson wrote:
On Wed, Apr 21, 2004 at 08:58 +0200, Herbert Kaminski wrote:
To be more precise: it boots correctly and starts installing.
But choosing a mirror fails.
[...]
I think you need to specify a complete URL with busybox's wget. So it
should
On Wed, 21 Apr 2004 01:31:25 +0200, Thomas Poindessous wrote:
On Tue, Apr 20, 2004 at 10:57:02PM +0200, Herbert Kaminski wrote:
On Tue, 20 Apr 2004 18:02:31 -0400, Todd Troxell wrote:
Debian-installer-version: 4/20/2004 BETA 3 from:
http://http.us.debian.org/debian/dists/testing
On Wed, 21 Apr 2004 08:39:15 +0200, Herbert Kaminski wrote:
On Wed, 21 Apr 2004 01:31:25 +0200, Thomas Poindessous wrote:
You can also test with more recent image from :
http://ftp.debian.org/debian/dists/sid/main/installer-sparc/
This problem should be fixed in last version.
Indeed, the 32bit
On Tue, 20 Apr 2004 18:02:31 -0400, Todd Troxell wrote:
Debian-installer-version: 4/20/2004 BETA 3 from:
http://http.us.debian.org/debian/dists/testing/main/installer-sparc/current/images/sparc64/netboot/
Presumably you will get a little further using the image from
Package: installation-reports
Debian-installer-version: netinst ISO date: 09-APR-04 from
http://gluck.debian.org/cdimage/testing/sarge_d-i/sparc/current/sarge-sparc-netinst.iso
modified so the silo.conf contains the right boot parameters
Method: boot from cdrom, starting normal priority,
On Sun, 11 Apr 2004 19:18:09 -0400, Joey Hess wrote:
- Forwarded message from Ben Collins [EMAIL PROTECTED] -
[...]
Here's the silo.conf that worked for me. Please place it in your
[...]
partition=1
timeout=600
message=/boot/debian.txt
default=linux
append=cdrom devfs=mount rw
On Sun, 11 Apr 2004 16:30:19 +1000 (EST), Vincent McIntyre wrote:
The installer cd boots ok, and gives me a welcome prompt.
I hit return to start the installer.
That's bound to fail currently...
Kernel panic: VFS: Unable to mount root fs on 00:00
...entering 'linux root=/dev/rd/0 rw' at the
Package: installation-reports
Debian-installer-version: netinst ISO date: 09-APR-04 from
http://gluck.debian.org/cdimage/testing/sarge_d-i/sparc/current/sarge-sparc-netinst.iso
Method: boot from cdrom
Machine: SPARC Classic (sun4m)
Processor:
Memory: 16 MB
typing 'boot cdrom' at the
1 - 100 of 112 matches
Mail list logo
