Control: tags -1 +wontfix
Le samedi, 24 mars 2012, 01.21:49 Jonathan Nieder a écrit :
Jonathan Nieder wrote:
With RIPCache 16m in /etc/cups/cupsd.conf the system seems to be
sane again and printing is still working fine.
I think that might even make a good default. Alternatively, how
Control: found -1 24.2.0esr-1
Control: severity -1 important
I'm raising this bug to important, because though there's a very
easy workaround, by default Iceweasel seems to really print the
print to PDF (a box shortly appears) and gives no error messages.
In case of a temporary page (not cached),
Control: forwarded -1 https://cups.org/str.php?L4328
Control: tags -1 +upstream
Hi Stefan, and thanks for your bugreport,
I have now reported your bug on the upstream bugtracker and will wait
for comments from upstream before including your patch.
Thanks for your contributions!
Cheers, OdyX
Package: src:linux
Version: 3.12.6-2
Severity: minor
Dear Maintainer,
as stated in the subject and the switch I need to toogle is the one to enable
recording from the microphone, named Microphone Capture. It is always enabled,
but after resume I have to switch it off and back on, otherwise the
On 04.01.2014 16:02, Cyril Brulebois wrote:
Andreas Cadhalpun andreas.cadhal...@googlemail.com (2014-01-04):
I just meant, that the touchpad cannot move the cursor, although
evdev is loaded.
Might be a kernel or driver bug. Can you please attach Xorg log and
kernel log from the installer?
I
This bug is hopefully fixed upstream in the 1.8.6 version with the
Nicolas Boichat bugfix applied.
Best regards,
Philippe
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Le samedi 04 janvier 2014 à 12:47 +, Ian Jackson a écrit :
Uoti Urpala writes (Bug#727708: init system discussion status):
Your earlier wording sounds
like it was talking about the former (installable) and Ian's proposal
definitely was (explicitly mentioning package fields), but the
Control: tags -1 +wontfix
Hi Thomas,
Apparently its been more than 10 years since you reported this bug
against cups!
Le dimanche, 10 août 2003, 14.24:00 Thomas Hood a écrit :
Here follow two very simple scripts that are designed to be placed in
/etc/network/if-up.d/ and
Package: openssh-server
Version: 1:6.4p1-2
Severity: normal
Bonjour,
I have enabled SELinux in permissive mode.
When I connect and logoff, I get the following lines in auth.log:
Jan 4 16:26:44 tc2 sshd[18138]: Accepted password for benoit from
[some_ipv6_address] port 58739 ssh2
Jan 4
Package: wnpp
Owner: Changwoo Ryu cw...@debian.org
Severity: wishlist
* Package name: fonts-woowa-hanna
Version : 1.000
Upstream Author : Woowa Brothers http://woowahan.com/
* URL : http://www.woowahan.com/?page_id=3985
* License : SIL Open Font License 1.1
Control: reassign 726763 gnome-settings-daemon 3.8.5-2
Control: severity 726763 important
Hi,
I tested systemd-shim and, using it, suspend etc. from GNOME menus work
agin with sysvinit/upstart.
So to resolve this bug, GNOME should depend on:
systemd-shim | systemd-sysv
This ordering ensures
Package: gkrellm
Version: 2.3.5-5
Severity: wishlist
Hi,
When using docker http://www.docker.io/ many ethernet interfaces are
created. It would be desirable to be able to filter those out (they
all start with veth) or possibly show them but not remember them in
the configuration list (have a
Control: forwarded -1 https://cups.org/str.php?L4329
Control: tags -1 +upstream
Hi Christopher,
Apparently its been more than 8 years since you reported this bug
against cups!
Le mercredi, 13 avril 2005, 08.51:30 Christopher Swingley a écrit :
It would be convenient to have the printer
Package: dash
Version: 0.5.7-3+nmu1
Severity: important
zsh -c echo test /dev/full
zsh:echo:1: write error: no space left on device
bash -c echo test /dev/full
bash: line 0: echo: write error: No space left on device
dash -c echo test /dev/full
[nothing]
echo $?
1
Both bash and zsh inform
Control: reassign -1 cups-bsd
Control: forcemerge 304504 -1
Le dimanche, 29 décembre 2013 12.06:13, vous avez écrit :
The lpr man page contains the following documentation on setting job
options:
-o option[=value]
Sets a job option.
But it does not list the job options. The
Package: guile-2.0
Version: 2.0.9+1-1
Severity: normal
The automatic cache of compiled versions of scripts in guile-2.0
identifies scripts mainly by name, and partially by mtime. This is not
actually sufficient: it is easily misled by a pathname that refers to
different files at different times.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
To reproduce login on the console and run
xinit /usr/bin/clementine
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAEBCAAGBQJSyDV+AAoJEAqeKp5m04HLvQkH/j5aFj63f9MTy5as45BzFlwM
block 684607 by 690473
thanks
On Sun, Oct 14, 2012 at 08:59:27PM -0700, Jonathan Nieder wrote:
tags 690473 + upstream patch
quit
Hi Roger,
Roger Leigh wrote:
dash:
$ echo foo /dev/full
[nothing]
How about something like this patch?
Many thanks for the patch.
Gerrit, did
Package: mailman
Severity: normal
Hello,
The test suite declared in debian/tests/control is missing a dependency
on lsb-release.
After adding lsb-release to the dependency list, I got the test suite to
run on a clean unstable chroot (the tests failed, but I didn't
investigate further).
--
Hi Tobias,
On Sat, 04 Jan 2014 14:54:59 +0100, Tobias Schlemmer
keinst...@users.berlios.de wrote:
Even though gdb-mingw-64 installs x86_64-mingw32-gdb and
i386-w64-mingw64-gdb either of them is not working (at least on x86_64).
In particular, gdb refuses to connect to the corresponding
Package: pinentry-curses
Version: 0.8.3-1
Severity: important
Dear Maintainer,
Since the upgrade to 0.8.3-1 pinentry-curses is no longer able to show
multiline prompts. This is problematic when used with gpg-agent, since for
instance the key ID that is being unlocked is no longer visible.
Here
Control: severity -1 important
with potential security problems for users who have the printing
feature of the terminal enabled.
On 2014-01-04 10:21:53 -0500, James McCoy wrote:
This is purely a display issue, so I'm downgrading the severity.
OK, but I'm raising it to important since it
Control: reassign -1 wnpp
Control: retitle -1 RFP: dymo-cups-drivers -- Cups drivers for Dymo
labelwriter
Hi Jonas,
as has been pointed in the #640246 bug, this is essentially a Request
for Package, which I consider covered by the (later) request to package
dymo-cups-drivers, #640246.
I'm
tags 611068 + upstream patch
thanks
On Mon, 09 Apr 2012 at 15:54:33 +0100, Simon McVittie wrote:
forwarded 611068
http://ikiwiki.info/bugs/transient_autocreated_tagbase_is_not_transient_autoindexed/
Any thoughts on this? I've been using both proposed branches on my own wikis
for some time.
tags 687072 unreproducible moreinfo
thanks
Hi Mircea,
On 09/09/2012 12:38 PM, Mircea Gherzan wrote:
Package: xbmc-bin
Version: 2:11.0~git20120510.82388d5-1+b1
Severity: normal
Stack trace:
Thread 1 (Thread 0x7f712d719700 (LWP 2829)):
#0 0x7f713e2b6475 in *__GI_raise (sig=optimized
@ Armin: you install to 'apt-get install ruby'
Hi Debian-Ruby,
The bug report below is interesting. The user has ruby1.8 installed, that
provides ruby-interpreter. As a result, h-c-i-h Depends' line is satisfied:
Depends: ruby | ruby-interpreter, ruby-debian, ruby-json
However, since
Package: autodocktools
Version: 1.5.7~rc1~cvs.20130519-1
Severity: grave
Justification: renders package unusable
Hi,
as Stephen P. Molnar reported here
https://lists.alioth.debian.org/pipermail/debian-med-packaging/2014-January/024278.html
(Stephen, it would be better to fire up the
Package: mupdf
Version: 1.3-1
Severity: wishlist
Dear Kan-Ru Chen,
I'd like to suggest to replace the link /usr/bin/mupdf - mupdf-x11 by a little
script (similar to /usr/bin/xpdf from the xpdf-package) in order to be able to
use mupdf also with compressed pdf-files. Please find attached a script
I'm uploading the same NMU of NSS now as 3.15.3.1-1.1, adding several
useful utilities to libnss3-tools (http://bugs.debian.org/701141).
The changes are available in git (including a signed tag) at:
git://lair.fifthhorseman.net/~dkg/nss
They should be able to be directly pulled into the
tags 701807 moreinfo
thanks
Hi Dominic,
Thank you for the patch. Could you please refresh it and test it on
latest unstable version (2:12.3+dfsg1-3)?
I would like to give a few weeks to 12.3 in unstable and testing, but
if Gotham does not get releases soon, I'm open to giving it a try.
Cheers,
Package: zsync
Version: 0.6.2-1
Severity: normal
--- Please enter the report below this line. ---
Example file size: 380476
Requested range by zsync: bytes=0-380927
So, the client asked for a part of the file that lies beyond the end of
the file. Most web servers ignore this behavior like
Ian Jackson ijack...@chiark.greenend.org.uk writes:
Bdale Garbee writes (Bug#727708: init system discussion status):
Russ Allbery r...@debian.org writes:
My inclination would be to give maintainers technical advice to accept
integrations with either existing synchronization protocols, but
Package: strongswan-nm
Version: 5.1.0-3
Severity: normal
--- Please enter the report below this line. ---
1) Configuration
I did not figure out how to setup a strongswan connection within the
Gnome3 Network Manager toolkit in the top right corner. I worked around
this by using the classic
Package: gnome-documents
Version: 3.10.0-1
Severity: important
Dear Maintainer,
I tried to start gnome-documents from command line and got the following
error:
$ gnome-documents
(gjs-console:31267): Gjs-WARNING **: JS ERROR: Error: Requiring GdPrivate,
version 1.0: Typelib file for namespace
Hi Felix,
On Fri, Jan 03, 2014 at 10:58:14PM +0100, Felix Geyer wrote:
I've ported and tested the libvirt AppArmor support from the Ubuntu package.
The only difference in the profiles is this addition to
usr.lib.libvirt.virt-aa-helper:
/etc/libnl-[0-9]/classid r,
It can be enabled by
Package: wnpp
Severity: wishlist
Owner: Laszlo Boszormenyi (GCS) g...@debian.org
* Package name: folly
Version : git snapshot
Upstream Author : Facebook, Inc.
* URL : https://github.com/facebook/folly
* License : Apache-2.0
Programming Lang: C++
Description
Dirk Heinrichs dirk.heinri...@altum.de writes:
I once wrote systemd service files for the KDC and Admin Server for
Exherbo. Maybe they can be used as a starting point.
Some comments on these, since I've been spending a bunch of time looking
at systemd lately for some reason.
[Unit]
Commenting as a porter, the decision on default init system might affect
me something like this:
If GNU/Linux defaults to Upstart, it's likely in porters' interest to
get that working as well as possible so we can keep consistency with
Linux arches. I'm really grateful of Dimitri's work on this
Russ Allbery r...@debian.org writes:
In Debian:
PIDFile=/var/run/krb5-kdc.pid
EnvironmentFile=/etc/default/krb5-kdc
ExecStart=/usr/sbin/krb5kdc -P /var/run/krb5-kdc.pid $KDC_ARGS
This should be:
ExecStart=/usr/sbin/krb5kdc -P /var/run/krb5-kdc.pid $DAEMON_ARGS
Sorry, cut and paste error.
On 01/04/2014 11:21 AM, Steven Chamberlain wrote:
Commenting as a porter, the decision on default init system might affect
me something like this:
If GNU/Linux defaults to Upstart, it's likely in porters' interest to
get that working as well as possible so we can keep consistency with
Linux
Anthony Towns writes (Bug#727708: init system other points, and conclusion):
I wonder if folks could clarify what status they expect secondary init
systems to have in Debian?
Thanks for bringing up this point so very clearly.
I agree entirely with the thrust of your argument. I would very
Russ Allbery writes (Bug#727708: init system discussion status):
Ian Jackson ijack...@chiark.greenend.org.uk writes:
Would that suit you both ?
I may have lost the thread here, but that doesn't sound quite right.
Wouldn't we want to say that each daemon package should implement the
native
Package: renameutils
Version: 0.12.0-1
Severity: normal
On UTF-8 locale qmv (or qcp) represents non-ASCII characters as octal
escape sequences. E. g.:
$ ls
10 £ file файл
$ qmv
In editor (any) I will see:
10 \302\243 10 \302\243
file
Steven Chamberlain writes (Bug#727708: init system other points, and
conclusion):
Policy may need to explain whether hard systemd requirement is
permissible, if it should be expressed in package dependencies, or what
it should do otherwise (e.g. refuse to start, fail with error message,
fall
Package: tclodbc
Version: 2.5.1-2
Severity: minor
Please drop +ssh protocol from debian/control::Vcs-* to make debcheckout
work everybody.
Debian Policy Manual 5.6.25 also states that the purpose of Vcs-* fields is to
indicate publicly accessible repositories which is obviously not true by
Hi Jonathan (2014.01.02_19:22:33_+0200)
* having to support remote signing
It would be fair enough to stderr not supported, please use the older
tool in devscripts and error 1 if such an argument was provided. That
would be pragmatic if (as I suspect) -r is rarely used.
Aww. I'm a
On Sat, Jan 4, 2014 at 1:51 AM, Paul Tarjan p...@fb.com wrote:
checking whether the Boost::Thread library is available... yes
configure: error: Could not find a version of the library!
It looks like it defaults to looking in /usr/bin instead of where lib
boost is in sid. Try
./configure
according to upstream's ext/tk/extconf.rb, ruby is not yet compatible with
Tcl/Tk 8.6.
Then I tried to build it with 8.6 as the default, and only build-depending on
tk8.5. which failed.
Here are the ugly hacks to build it with 8.5 as a non-default version, for 1.9
and 2.0.
Sjoerd Simons sjo...@debian.org writes:
Essentially this boils down to whether the logind interfaces will be
available when using sysvinit. Most of the other interfaces (at least
for current gnome as in experimental) would cause some functionality to
either be missing or not work, but
On 01/04/14 19:54, László Böszörményi (GCS) wrote:
On Sat, Jan 4, 2014 at 1:51 AM, Paul Tarjan p...@fb.com wrote:
checking whether the Boost::Thread library is available... yes
configure: error: Could not find a version of the library!
It looks like it defaults to looking in /usr/bin instead
reassign 711929 ioquake3 1.36+u20130504+g42eeb75-2
thanks
I hope you won't mind...
Jérémy.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Ian Jackson ijack...@chiark.greenend.org.uk writes:
Russ Allbery writes (Bug#727708: init system discussion status):
I may have lost the thread here, but that doesn't sound quite right.
Wouldn't we want to say that each daemon package should implement the
native non-forking startup protocol
Cory opensourcesoftwaredevelo...@gmail.com writes:
If Debian go's with systemd they need to use systemd 207 as its
supported in RHEL 7 so we know it's going to be supported for around 10
years also why does Debian have systemd 204 in it's repos?? systemd 207
is way better
Because it's the
On Sat, Jan 4, 2014 at 6:58 PM, Faidon Liambotis parav...@debian.org wrote:
On 01/04/14 19:54, László Böszörményi (GCS) wrote:
Anyway, folly is packaged and uploaded. HHVM is one small step
closer to be part of Debian.
Does folly have a stable ABI? I remember raising this with Paul some time
Russ Allbery writes (Bug#727708: init system discussion status):
Ian Jackson ijack...@chiark.greenend.org.uk writes:
Are the protocols offered by systemd and upstart each so plainly
reasonable, that we are willing to overrule a maintainer who feels they
protocol they are asked to support is
Hi Matthias,
On Sat, Jan 4, 2014 at 9:58 PM, Matthias Klose d...@debian.org wrote:
according to upstream's ext/tk/extconf.rb, ruby is not yet compatible with
Tcl/Tk 8.6.
Sad to hear that. But 8.5 stays with us for a while, so it's not a big deal.
Then I tried to build it with 8.6 as the
Russ Allbery writes (Bug#727708: init system discussion status):
Ian Jackson ijack...@chiark.greenend.org.uk writes:
And the other is that IMO the proposed prescription for non-Linux ports
doesn't make sense for systemd. There is little prospect of systemd
being ported to those systems.
On Tue, Dec 31, 2013 at 11:58:17PM +0100, Julian Andres Klode wrote:
On Tue, Dec 31, 2013 at 11:06:15PM +0100, Michael Vogt wrote:
[..]
You really need to include the original copyright statement and the license
here, otherwise you violate the license. If the original code does not
include the
(Josh, is there some reason why you replied to the TC list directly
rather than the bug report ? You should send your messages to the bug
so they are filed, displayed and archived there. Thanks.)
Josh Triplett writes (Re: Bug#727708: init system discussion status):
Clint Adams wrote:
As
Package: sponsorship-requests
Severity: normal
Package: sponsorship-requests
Severity: normal [important for RC bugs, wishlist for new packages]
Dear mentors,
I am looking for a sponsor for my package libgeo-proj4-perl
Package name: libgeo-proj4-perl
Version : 1.04-1
Upstream
Package: selinux-policy-default
Version: 2:2.20131214-1
Severity: normal
I did a touch /.autorelabel after last update as suggested by NEWS
I get lots of these anyway:
[Sat Jan 4 16:03:27 2014] SELinux: Context
unconfined_u:unconfined_r:mono_t:s0-s0:c0.c1023 would be invalid if enforcing
I
On Fri, Jan 03, 2014 at 02:55:48PM +0100, Sebastian Andrzej Siewior wrote:
where do I start. Let me explain what is going on here. The code
sequence
Yes the IST stacks are needed for correctness, even in more cases than
the example below. You cannot just disable them, just because you don't
Ian Jackson writes (Re: Bug#727708: init system discussion status):
Are you going to vote to overrule a maintainer who says
I have already implemented non-forking readiness protocol X and I
think support for all init systems in my daemon should be done via
one protocol. Please do
Hi Julien,
Thanks for the update! Forwarding to the 1.53 removal request.
On January 4, 2014 02:52:38 PM you wrote:
On Sun, Dec 1, 2013 at 16:43:07 +0100, Julien Cristau wrote:
On Sun, Jul 14, 2013 at 14:59:24 -0500, Steve M. Robbins wrote:
Boost 1.54 is now in sid on all architectures,
Package: offlineimap
Version: 6.5.4-2
Severity: normal
My imap server (running courier) ran out of disk space. offlineimap
then exhibited the following behaviors:
* Some messages began getting duplicated.
* Some folders started having uid validity problems. Deleting everything
locally and
Package: selinux-policy-default
Version: 2:2.20131214-1
Severity: normal
Not sure if this is the relevant package for this bug
dpkg: error processing archive /var/cache/apt/archives/libboost-
iostreams1.54.0_1.54.0-4+b1_amd64.deb (--unpack):
cannot get security labeling handle: No such file or
On Sat, Jan 04, 2014 at 07:07:15PM +0100, László Böszörményi (GCS) wrote:
Does folly have a stable ABI? I remember raising this with Paul some
time
ago and us deciding that embedding folly into the HHVM source would be the
way to go, as there is really no stable interface between them.
I can't
tags 697448 confirmed
thanks
Hi Alex,
On 01/10/2013 02:24 PM, Alexandre Rossi wrote:
found 697448 2:11.0~git20120510.82388d5-1
thanks
xbmc gives me a black screen (which replaces the root window
background and
100% CPU usage. There is no clue in the debug logs of what is
happening or
Ian Jackson ijack...@chiark.greenend.org.uk writes:
Russ Allbery writes (Bug#727708: init system discussion status):
I think they are. Furthermore, I don't think there's any likely
prospect that either will adopt a socket-based synchronization protocol
other than systemd's, so saying that
Russ Allbery writes (Bug#727708: init system discussion status):
Ian Jackson ijack...@chiark.greenend.org.uk writes:
It seems daft to go around making two (or perhaps three or more) patches
to every daemon when one patch to each daemon, and a couple of
compatibility modes in the init
I can't answer this question. Still, I expect that HHVM will follow
ABI changes very fast. Paul?
Anyway, I think having a separate package and let users get knowledge
of that doesn't mean HHVM can't use an embedded copy if it needs to.
But it should be a separate package whenever it's possible.
Ian Jackson ijack...@chiark.greenend.org.uk writes:
Russ Allbery writes (Bug#727708: init system discussion status):
Whether systemd upstream should support the SIGSTOP protocol is
certainly debatable, but I'm very reluctant to support an option that
tries to force the systemd maintainers to
Package: ftp.debian.org
Severity: normal
Please remove boost1.49. Boost 1.54 is in the archive (and is now the
default) and Boost 1.55 is in preparation for upload.
-Steve
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
On Fri, Jan 03, 2014 at 11:23:44PM +0100, intrig...@debian.org wrote:
Source: libotr
Version: 4.0.0-2.2
Severity: normal
Tags: patch
User: hardening-disc...@lists.alioth.debian.org
Usertags: goal-hardening
Hi,
the attached patch completes the set of hardening flags used for
libotr, by
Ian Jackson ijack...@chiark.greenend.org.uk writes:
The question isn't what you would prefer. The question is this:
Are you going to vote to overrule a maintainer who says
I have already implemented non-forking readiness protocol X and I
think support for all init systems in my daemon
Control: found -1 2.4.2-1.6
I still see variation in the following file:
/usr/share/libtool/libltdl/Makefile.in
An example diff between i386 and amd64 is attached.
--
Jakub Wilk
diff -ur libltdl-dev_2.4.2-1.6_i386/usr/share/libtool/libltdl/Makefile.in
Package: fontconfig
Version: 2.11.0-2
Severity: normal
File: /usr/bin/fc-cache
* What led up to the situation?
I have a collection of fonts in my ~/.fonts folder. One of the fonts is a
Hebrew font called Aharoni Bold. The file name is ahronbd.ttf. This file
existed in my ~/.fonts folder for
Russ Allbery writes (Bug#727708: init system discussion status):
I consider the TC, when working properly, to be like a court, not an
executive or legislature.
One of our roles is to rule on the content of policy. That's much
more like a legislative role.
I think we should see what the other
Thanks for your note, really a prompt reply. I'll have to familiarize
myself with the reportbug tool.
Stephen P. Molnar, Ph.D.Life is a fuzzy
set
Foundation for Chemistry Stochastic and
multivariate
Package: binfmt-support
Version: 2.1.1-1
Severity: normal
Dear Maintainer,
I was upgrading binfmt-support to the one in testing and came across
the following :-
Setting up binfmt-support (2.1.1-1) ...
Installing new version of config file /etc/init/binfmt-support.conf ...
update-binfmts:
On 4 January 2014 15:46, Josselin Mouette j...@debian.org wrote:
Le samedi 04 janvier 2014 à 12:47 +, Ian Jackson a écrit :
Uoti Urpala writes (Bug#727708: init system discussion status):
Your earlier wording sounds
like it was talking about the former (installable) and Ian's proposal
Hi,
On 04.01.2014 18:19, Guido Günther wrote:
Hi Felix,
On Fri, Jan 03, 2014 at 10:58:14PM +0100, Felix Geyer wrote:
I've ported and tested the libvirt AppArmor support from the Ubuntu package.
The only difference in the profiles is this addition to
usr.lib.libvirt.virt-aa-helper:
On Fri, Jan 03, 2014 at 04:40:54PM -0800, Russ Allbery wrote:
And the other is that IMO the proposed prescription for non-Linux ports
doesn't make sense for systemd. There is little prospect of systemd
being ported to those systems.
I'd prefer to leave it in. Upstream's opinions aside,
Package: qa.debian.org
Severity: normal
Dear Maintainer,
After an upload to stable proposed updates, a new link showed up on DDPO.
But this link showed up in the unstable column instead of the stable one. And
it links to the new queue [1] instead of the pu queue [2].
Regards,
Bertrand
[1]
Steve Langasek vor...@debian.org writes:
On Fri, Jan 03, 2014 at 04:40:54PM -0800, Russ Allbery wrote:
I'd prefer to leave it in. Upstream's opinions aside, systemd is free
software and if someone wants to try to port it (or, possibly more
likely, port it by writing something native that
Package: release.debian.org
Severity: normal
User: release.debian@packages.debian.org
Usertags: britney
Hello, maybe a bug from Britney : the package wims-moodle contains no
javascript and never used yui. It does not depend on it in any manner.
This may require some manual handling. I ignore
Package: release.debian.org
Severity: normal
User: release.debian@packages.debian.org
Usertags: britney
Hello, the package grr has been removed from testing, but the hint given by
britney
is not valid: grr does not depend on yui in any way.
This may require a manual inspection.
Best
On Sat, 2014-01-04 at 20:10 +0100, Georges Khaznadar wrote:
Hello, maybe a bug from Britney
Nope. It's arguably a bug in the script which turns information from
UDD's auto-removals script in to removal hints, as the comments could
possibly be clearer.
: the package wims-moodle contains no
On Sat, Jan 04, 2014 at 06:14:30PM +, Ian Jackson wrote:
... (Note that the latter would work better if upstart stopped
conflicting with sysvinit, similar to how systemd can be installed
without being init.)
There does seem to need to be some work there.
That has already been
Control: merge 734199 -1
On Sat, 2014-01-04 at 20:15 +0100, Georges Khaznadar wrote:
Hello, the package grr has been removed from testing, but the hint given by
britney is not valid
britney doesn't give hints. Also, the hint is perfectly valid.
: grr does not depend on yui in any way.
Yes,
Package: wnpp
Owner: Stefan Hornburg (Racke) ra...@linuxia.de
Severity: wishlist
X-Debbugs-CC: debian-de...@lists.debian.org,debian-p...@lists.debian.org
* Package name: libbackpan-index-perl
Version : 0.42
Upstream Author : Michael G Schwern
* URL :
]] Russ Allbery
2. Package logind separately from systemd, get it working with sysvinit.
The problems with doing this, as I understand it, is that we'd not be
able to upgrade such a separately-packaged logind beyond 204 for
jessie. I'm not sure how much impact that would have.
Russ Allbery writes (Bug#727708: init system discussion status):
I thought that was already resolved? I objected to the should in the
original language regarldess of which init system we choose, and Ian said
that he'd reworded it already to something akin to mine, which just says
that ports
Hello GKrellM developers,
I've just received this request from a Debian user and I'm forwarding it to you.
Regards,
Sandro
On Sat, Jan 4, 2014 at 5:07 PM, Christophe Troestler
christophe.troest...@umons.ac.be wrote:
Package: gkrellm
Version: 2.3.5-5
Severity: wishlist
Hi,
When using
Package: transifex-client
Version: 0.9.1-1
Severity: wishlist
Hi,
while using the currently packaged version, transifex sent me a mail
informing me that there is new upstream version available. Please
consider packaging it. Thank you
Regards
--
Sebastian Ramacher
signature.asc
Description:
On Sat, 2014-01-04 at 20:10 +0100, Georges Khaznadar wrote:
[stuff]
For the record, replying to this earnt me:
quote
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The
On Sat, Jan 04, 2014 at 11:08:36AM -0800, Russ Allbery wrote:
Steve Langasek vor...@debian.org writes:
On Fri, Jan 03, 2014 at 04:40:54PM -0800, Russ Allbery wrote:
I'd prefer to leave it in. Upstream's opinions aside, systemd is free
software and if someone wants to try to port it (or,
]] Dimitri John Ledkov
Also which upstream are staying with? systemd upstream git history[4]
has only one branch, which is linear with linear version number
increments, without any stable release branches or other indications
of which patches are stable (or possibly security) bugfixes.
On Sat, Jan 04, 2014 at 06:14:30PM +, Ian Jackson wrote:
(Josh, is there some reason why you replied to the TC list directly
rather than the bug report ? You should send your messages to the bug
so they are filed, displayed and archived there. Thanks.)
I don't subscribe to debian-ctte@;
On Sat, 2014-01-04 at 20:05 +0100, Bertrand Marc wrote:
After an upload to stable proposed updates, a new link showed up on DDPO.
But this link showed up in the unstable column instead of the stable one. And
it links to the new queue [1] instead of the pu queue [2].
I suspect this is a
101 - 200 of 331 matches
Mail list logo
