Package: chromium
Version: 35.0.1916.86-1
After upgrading chromium to 35.0.1916.86-1 the pepper based flash plugin
(installed with the package pepperflashplugin-nonfree) stopped working.
I tried to reinstall it, but that didn't solved the issue. Finally I
downgraded to chromium 34.0.1847.132-1
Package: rpcbind
Version: 0.2.1-3
Severity: important
Tags: patch
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
When running under systemd:
o NFS mounts from /etc/fstab do not work.
o NFS exports also fail
Package: libreoffice-core,libreoffice-report-builder-bin
Version: libreoffice-core/1:4.2.4-2
Version: libreoffice-report-builder-bin/1:4.1.6~rc2-1+b1
Severity: serious
During upgrading libreoffice-core on kfreebsd-i386 today:
Preparing to unpack .../libreoffice-core_1%3a4.2.4-2_kfreebsd-i386.deb
Package: nfs-common
Version: 1:1.2.8-6
Followup-For: Bug #622394
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
When running under systemd:
o NFS mounts from /etc/fstab do not work.
o NFS exports also fail
Hi!
Doing more tests on this I came to the conclusion that the problem we found
when creating the bridge with iproute must be a bug on iproute when creating
a bridge while setting a MAC.
If I create a bridge using:
# ip link add br2 address fc:cc:cc:cc:cc:cc type bridge
I end up with a wrong
Package: fail2ban
Version: 0.8.13-1
Severity: normal
Tags: patch
Hello,
We use fail2ban for openvpn, here are the rules we are using.
Samuel
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1,
Source: libnl
Version: 1.1-8
Severity: important
Hello,
This package seems Linux-specific, so it should use Architecture:
linux-any in the control file, so its build is not even tried on
non-Linux archs.
Samuel
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT
On Sun, 11 May 2014, Dominik George wrote:
dist-upgrade today, bugged me six times. Thank you!
ARRGH this will be the death of me! Which version were you upgrading
from? The one in stable? If it was from testing/unstable you should not
have been asked again.
Sorry for the annoyance.
Source: kfreebsd-9
Version: 9.0-10+deb70.6
Severity: important
FreeBSD Errata Note EN-14:05 describes a potential data corruption bug
in the ciss(4) driver for HP hardware RAIDs:
http://www.freebsd.org/security/advisories/FreeBSD-EN-14:05.ciss.asc
r264354 of head/ fixes kfreebsd-11
r264510 of
On Tue, May 13 2014, Юрий Матронов wrote:
After analyzing the source code make 4.0 figured out that the problem
in the function find_char_unquote (read.c).
I replaced the
# define STOP_SET (_v, _m) ANY_SET (stopchar_map [(unsigned char) (_v)], (_m))
Thereafter, all the works.
Hi Samuel,
Thank you for sharing your configuration files! Would you mind to
submit a proper pull request with them at
https://github.com/fail2ban/fail2ban/pulls
upon a brief look I am afraid they might be a bit 'too flexible' thus
theoretically allowing for injection attacks, e.g. having .*
On Tue, May 13, 2014 at 10:04 PM, Guus Sliepen g...@debian.org wrote:
On Tue, May 13, 2014 at 01:44:32PM +0200, Guus Sliepen wrote:
Please tell me where I can download your apitrace packages, and
unless there is
something wrong with them I'll upload them to Debian today.
Ok, found
Am 14.05.2014 02:02, schrieb Samuel Thibault:
Source: libnl
Version: 1.1-8
Severity: important
Hello,
This package seems Linux-specific, so it should use Architecture:
linux-any in the control file, so its build is not even tried on
non-Linux archs.
libnl is about to be removed [0], so
Package: denyhosts
Version: 2.6-10+deb7u2
Severity: normal
On a debian system a successful ssh login is recorded like this in auth.log:
May 14 09:57:40 mybox sshd[30973]: Accepted password for joe from 1.15.16.24
port 57633 ssh2
But regex.py is looking for:
SUCCESSFUL_ENTRY_REGEX =
On Tue, 13 May 2014 16:39:14 -0700
Santiago Garcia Mantinan ma...@debian.org wrote:
Hi!
Doing more tests on this I came to the conclusion that the problem we found
when creating the bridge with iproute must be a bug on iproute when creating
a bridge while setting a MAC.
If I create a
Cyril Brulebois k...@debian.org (2014-05-13):
Hallo Thomas,
and thanks for your report.
Thomas Renard cybae...@web.de (2014-05-13):
Package: debian-installer
Version: testing
Severity: wishlist
Dear Maintainer,
according to
Package: wnpp
Severity: wishlist
* Package name: xul-ext-privacy-badger
Version : 0.1.3
Upstream Author : Yan Zhu y...@eff.org
* URL : https://www.eff.org/privacybadger
* License : GPLv3
Programming Lang: Javascript
Description : Web browser plugin for
On Thu, Sep 30 2010, Olly Betts wrote:
You can use make -q to probe targets less intrusively. This also works
for a makefile with default rule like this one:
%:
echo $@
This matches the dummy target the other approach uses, so it doesn't work.
Using '-q' also seems less brittle
Package: apt-offline
Version: 1.3.1
Severity: important
Tags: patch
I want to make it really easy to build up Debian installs completely offline.
I found that after I did a barebones Debian install and installed
apt-offline, apt-offline was failing on:
apt-offline install /media/usbthumb/
Package: snmpd
Version: 5.7.2.1~dfsg-5
Severity: minor
Dear Maintainer,
There is a typo in /etc/snmp/snmpd.conf
rocommunity6 public defalut -V systemo
should be
rocommunity6 public default -V systemo
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT
tags 319652 + moreinfo
thanks
Hi Wichert,
Hmm, almost 9 years since the last follow-up on this bug. Now haydn is
long gone, and openldap 2.2 as well.
Searching the internet as well as upstream's bug tracker, I found a few
reports of this assertion in the 2.1 and 2.2 series (e.g. ITS#3278,
Ben Hutchings explained:
It wants to allocate 256KB of contiguous memory. This is fairly likely
to fail unless it's done at boot time or the system has plenty of free
memory (much more than 256KB).
Adding
snd_soc_cs42l51
snd-soc-openrd
to /etc/modules to ensure the modules
tags 598534 +pending
thanks
Hi,
The following change has been committed for this bug by
Manoj Srivastava sriva...@golden-gryphon.com on Tue, 13 May 2014 18:49:21
-0700.
The fix will be in the next upload.
=
I feel like this may be due to recent changes in init system.
Try to use systemd as describe in https://wiki.debian.org/systemd, it
solved the issue for me.
Without this - i've been having a lot of issue (with gdm and group
permissions).
Sylvain
--
To UNSUBSCRIBE, email to
On Tue, May 13, 2014 at 1:36 PM, Jackson Doak nosk...@ubuntu.com wrote:
I still lack access to a computer where i can do this. Could you please NMU
it?
The package hasn't been approved by the release team, nor uploaded to
squeeze yet, so there's nothing to NMU.
Regards,
Vincent
--
To
I also upgraded gdm3 to 3.12 from experimental - as i'm not sure current
sid version (3.8) works with systemd, see:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=677107
On 05/13/2014 10:06 PM, Sylvain Archenault wrote:
I feel like this may be due to recent changes in init system.
Try to
On 05/13/2014 04:13 PM, Gunnar Hjalmarsson wrote:
On 2014-05-13 21:48, Swarup wrote:
Just to make sure it is clear: I only tested the command env
GTK_IM_MODULE=xim gedit. When it gave the results described above,
then I did not attempt to make the workaround persistent using the
subsequent
Package: dracut
Version: 037-1
Severity: important
Dracut can't find systemd if pkg-config isn't installed.
Without pkg-config, I get these error messages when building an initrd:
/usr/lib/dracut/modules.d/98systemd/module-setup.sh: line 9:
/usr/lib/systemd/systemd: No such file or directory
On Mon, May 12, 2014 at 01:49:07PM +1200, Olly Betts wrote:
On Wed, May 07, 2014 at 11:04:32PM +0100, D Haley wrote:
I have made a patch which fixes the die-on-autosave dialog problem for
myself, and have similarly modified the startup tips as well. If you can
confirm this fixes the startup
Package: spatialite-gui
Version: 1.7.1-3
Severity: normal
Tags: patch
User: freewx-ma...@lists.alioth.debian.org
Usertags: wx3.0
Dear maintainer,
We're aiming to migrate the archive to using wxwidgets3.0 instead of
wxwidgets2.8.
I've rebuilt your package using the attached simple patch to make
Package: wnpp
Followup-For: Bug #741972
A new team has taken the development of the software, and on May 13 the beta of
version 3.0 was released.
Site: http://get-popcorn.com/
Github Repo: https://github.com/popcorn-official/popcorn-app
--
To UNSUBSCRIBE, email to
tags 293412 + moreinfo
thanks
Hi Robert,
It's been quite a long time since the last update to this bug.
I'm not familiar with GNU/Hurd, but AFAICT from the buildd logs,
openldap seems to build and link properly now; the current testsuite
failure is covered in #693971.
Can you comment on
Hi,
https://defuse.ca/audits/encfs.htm discusses a number of issues in EncFS:
Same Key Used for Encryption and Authentication
Stream Cipher Used to Encrypt Last File Block
Generating Block IV by XORing Block Number
File Holes are Not Authenticated
MACs Not Compared in Constant Time
64-bit
On Tue, Apr 22, 2014 at 08:04:13PM +0200, Julien Cristau wrote:
Hi Peter,
we received the following report against Debian's X server package, is
this something you've seen before and/or does the patch Steven provided
look sane?
sorry about the delay. Yes that patch seems like the best
Hi,
ucf is not dpkg. Just because the package is being reconfigured,
no information is passed from the dpkg to postinst to ucf to indicate
something special is going on.
To make ucf forget about the previously recorded state of the
decision, you should call:
ucf --purge
tags 731591 + unreproducible
tags 731591 + moreinfo
severity 731591 normal
thanks
Hi,
cd /tmp
mkdir test
cd test
mkdir registry
echo new-file | new
sudo /usr/bin/ucf --state-dir /tmp/test/registry -v /tmp/test/new /tmp/test/dest
echo newer new
sudo /usr/bin/ucf --state-dir /tmp/test/registry
301 - 336 of 336 matches
Mail list logo
