Bug#803641: Aw: Re: [pkg-horde] Bug#803641: php-horde: Multiple CSRF Vulnerabilities

> This seems to be: > https://github.com/horde/horde/commit/a199d74932c902844514b2a83d21e7e221257dae > I will prepare an upload for next jessie point-release, unless you > think it should go to the security mirors sooner. Thanks a lot! I think Horde's command shells are hardly used (I, for one

Bug#803769: cdimage.debian.org: hangs on Allwinner board after "Detecting hardware" and emits E: Unimplemented function

Package: cdimage.debian.org Severity: important -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 zcat'ing board firmware + partition image works fine for the Allwinner A20 based OLinuXino LIME2 board when using the files from below

Bug#803770: wrong places for files in xdelta packages (devel must own)

Package: xdelta Version: 1.1.3-9.1 Severity: important The xdelta packages handles the xdelta-config binary that does belong to a devel package and in the devel package has a missing xdelta.m4 file that not are include since libxdelta2-dev > 1.1.3-8 The file and the manpage "xdelta-config"

Bug#793761: 46.0.2490.71-1~deb8u1 also freezes at startup with xfce4/jessie

virtual workspace switcher. After a while, I get the "Pages Unresponsive" pop-up, but it displays absolutely nothing of use. I can only assume that there are OK and Cancel buttons there somewhere, and as you can see, there is something funky going on with redraws: http://jani.at.ifi.uio

Bug#803769: cdimage.debian.org: hangs on Allwinner board after "Detecting hardware" and emits E: Unimplemented function

Quoting Jonas Smedegaard (2015-11-02 15:28:36) > zcat'ing board firmware + partition image works fine for the Allwinner > A20 based OLinuXino LIME2 board when using the files from below > http://ftp.de.debian.org/debian/dists/stretch/main/installer-armhf/20150911/images/netboot/SD-card-images/ >

Bug#803686: [sebas...@xs4all.nl: Bug#803686: direwolf: FTBFS with libgps22]

Control: forwarded -1 wb2...@comcast.net Hi John, Please see the following bug report below recieved in the Debian Bug Tracker. We have applied this patch in the latest upload to the Debian archives. Please incorporate it, or something similar, in your next release. Thanks, Iain. -

Bug#797517: Fwd: suggestions for rubber Debian packaging.

Hi Hilmar, it's not really a bug since rubber is supposed to run with Python2. (Full Python3 compatibility is a lng way off.) Those issues will be gone in 1.4 (already committed). Cheers, Sebastian On Mon, Nov 02, 2015 at 10:58:22AM +0100, Preuße, Hilmar wrote: > On 30.10.2015 07:33,

Bug#770840: ark: Ark crashes on exit when nested archives opened

Could Debian just remove the faulty patch upstream_remove_part_from_KXMLGUIFactory_on_exit and create 4.14.2-3? I have checked it and this patch actually introduces version 4.14.3 without naming it so, since it is the only difference in ark between 4.14.2 and 4.14.3. The upstream fix is just

Bug#803474: src:systemd: Please use the default linker instead of gold on sparc64

-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 Hi! On 10/30/2015 09:56 PM, John Paul Adrian Glaubitz wrote: > Because currently any package linking against libsystemd or > libudev, *will* fail to build from source on sparc and sparc64. In > return, these packages have many reverse

Bug#765079: pcre3: Please disable jit on powerpcspe

On 11/02/2015 04:13 PM, Matthew Vernon wrote: > Wow, that was quick! Can say the same about your reply :). > Yes, please go ahead. Thanks a lot, that really helps. Adrian -- .''`. John Paul Adrian Glaubitz : :' : Debian Developer - glaub...@debian.org `. `' Freie Universitaet Berlin -

Bug#803327: One more thing

One other thing, when you update the release, would you mind also cherry picking this patch? https://github.com/hughsie/appstream-glib/commit/6e1ff4c5aa97bfb4ab3382931d68b65af5967960 What made it in was broke, and unfortunately we didn't catch it until right after release was tagged and more

Bug#765079: pcre3: Please disable jit on powerpcspe

Hi Matthew! On 11/02/2015 10:39 AM, John Paul Adrian Glaubitz wrote: > Please disable the JIT on sparc64 as well! I have prepared an NMU which fixes the FTBFS of pcre3 on sparc64 by disabling the JIT there. I'm attaching the debdiff. Can I get your permission to perform this NMU? Fixing pcre3

Bug#793761: Info received (46.0.2490.71-1~deb8u1 also freezes at startup with xfce4/jessie)

Huh. After several reboots of the guest OS, Chromium now starts. This is decidedly odd. The error message from Chromium is still there, that was a red herring. Additionally, there are now a bazillion (roughly) additional error messages, but the user interface _does_ start. OpenGL Warning:

Bug#801928: Django 1.8 has been uploaded to unstable

Control: severity -1 serious Hello, I just uploaded Django 1.8 to unstable and I am thus raising the severity of this bug to serious. Please fix this bug ASAP if you don't want it to be a target of the release manager's auto-removal scripts. Thank you! -- Raphaël Hertzog ◈ Debian Developer

Bug#803686: direwolf: FTBFS with libgps22

Control: tags -1 + pending Hi, On Mon, Nov 02, 2015 at 01:04:07PM +, Iain R. Learmonth wrote: > Will apply the patch and test later today or tomorrow. Applied, tested, uploaded. Thanks, Iain. -- signature.asc Description: PGP signature

Bug#803772: New strongswan upstream version 5.3.3

Package: strongswan Version: 5.3.2-1 Severity: normal Dear maintainer, a new upstream version is available: 5.3.3. Please consider packaging it, as it bringd Framed-IPv6-Address for RADIUS accounting. Thanks! Best regards, Kilian signature.asc Description: Digital signature

Bug#803768: RM: hedgewars [arm64] -- ROM; waiting for fpc 3.0

Package: ftp.debian.org Severity: wishlist Hi, I would like to remove hedgewars on arm64. clang is not good enough to provide a building package (actually clang is segfaulting, and since clang is a fallback where fpc is not available, and fpc is gaining support on arm64 soon(TM) in version 3.0

Bug#765079: pcre3: Please disable jit on powerpcspe

On 02/11/15 14:48, John Paul Adrian Glaubitz wrote: > On 11/02/2015 10:39 AM, John Paul Adrian Glaubitz wrote: >> Please disable the JIT on sparc64 as well! > > I have prepared an NMU which fixes the FTBFS of pcre3 on sparc64 by > disabling the JIT there. I'm attaching the debdiff. > > Can I

Bug#205112: patch available for 2G size limit

sorry, about the 2Gb size limit theres a devel brand ... https://github.com/jmacd/xdelta-devel/tree/64bithash so if that canot be imported that size limit will remain Lenz McKAY Gerardo (PICCORO) http://qgqlochekone.blogspot.com 2015-11-02 9:28 GMT-04:30 PICCORO McKAY Lenz

Bug#212189: Fwd: patch available for 2G size limit

this its a workaround fix in main upstream, please import: https://github.com/jmacd/xdelta/commit/f60f342df2fa3379b572e3854d8439a2fa0b5375 solves the 1 or 0 exit status

Bug#205112: patch available for 2G size limit

this its a workaround fix in main upstream, please import: https://github.com/jmacd/xdelta/commit/f60f342df2fa3379b572e3854d8439a2fa0b5375 Lenz McKAY Gerardo (PICCORO) http://qgqlochekone.blogspot.com

Bug#654924: TigerVNC: Include as official package?

On Mon, 02 Nov 2015, Andreas Tscharner wrote: > Hello World, > The package seems to have been finished on July 1st, 2012, but has > not yet been included into the official package repository? > What is wrong with it? that old version was rejected, primarily for demand to reuse xorg sources

Bug#803774: dh-systemd: please support enabling of mount files

Package: init-system-helpers Version: 1.24 Severity: wishlist Dear Maintainer, I notice that dh-systemd-enable only supports enabling of service, socket, and tmpfile. This is a request to support enabling .mount files as well. I have diff ready that implements this. Thank you, Erik Ziegenbalg

Bug#803758: ddd: diff for NMU version 1:3.3.12-5.1

On Mon, Nov 2, 2015 at 4:21 AM, Laurent Bigonville wrote: > Control: tags 803758 + patch > Control: tags 803758 + pending > > Dear maintainer, > > I've prepared an NMU for ddd (versioned as 1:3.3.12-5.1) and > uploaded it to DELAYED/10. Please feel free to tell me if I > should

Bug#803664: RM: openoffice.org-dictionaries -- RoQA; Renamed to libreoffice-dictionaries

On Sun, 01 Nov 2015 16:53:19 +0100 Andreas Beckmann wrote: > Package: ftp.debian.org > Severity: normal > Control: block -1 with 803662 > > src:openoffice.org-dictionaries has been renamed to > src:libreoffice-dictionaries and builds a slightly different set of > packages now. >

Bug#803765: evolution: crashes while editing mail after pressing backspace

Package: evolution Version: 3.18.1-1 Severity: normal Tags: upstream Hi, while editing a (plain text) mail, evolution crashed and ended in a endless loop writing evolution.desktop[2179]: ** (evolution:2179): CRITICAL **: WebKitDOMNode* webkit_dom_node_append_child(WebKitDOMNode*,

Bug#803686: direwolf: FTBFS with libgps22

Control: owner -1 ! Hi, On Sun, Nov 01, 2015 at 08:02:36PM +0100, Bas Couwenberg wrote: > direwolf (1.2-1) FTBFS with libgps22 as part of the gpsd transition (#803605): Will apply the patch and test later today or tomorrow. Thanks, Iain. --

Bug#803766: dolphin: crash on start when embedded terminal is open.

Package: dolphin Version: 4:4.14.2-1 Severity: normal Dear Maintainer, Doplhin crashed if I follow this procedure: 1) Open new Doplhin window 2) Open embedded terminal (F4) within this Dolpin instance 3) Try to open a now Dolphin window with path as parameter 4) It will crash (new windows

Bug#803767: debian-changelog-mode: don't rely on external date (LP#1197870)

Package: dpkg-dev-el Version: 35.12 Tags: patch X-Debbugs-Cc: era+deb...@iki.fi The current debian-changelog-mode shells out to coreutils' date. To increase portability (some developers work on packages from other architectures), it would be nice to see this clean up get integrated:

Bug#803776: libqb FTBFS on linux-amd64 with correct sun_path to bind()

Source: libqb Version: 0.17.2.real-4 Severity: normal Tags: patch Usertags: linux Hi, Currently libqb FTBFS on linux-amd64 for test ipc.test, when applying the attached patch, fix_ipc_setup_bug.patch. (in fact the unpatched version FTBFS with gcc-4.9.1-16). This patch fixes writing of the

Bug#794311: KiCad 4.0 rc1

> Sorry, I rephrase: Kicad 4.0.0~rc1 is *not* installable in a Jessie > environment now, as long as you want to keep other packages qui depend on > libc prior to gcc-5. Ah, that makes more sense. I was only testing on stretch, where things are (mostly) settled in favor of gcc5 AFAIK. Does jessie

Bug#803689: Acknowledgement (pypy: DEFAULT_SOABI at pypy-26 while DEFAULT_MAGIC_TAG = 'pypy-40')

Further discussion in #debian-python: 21:57 < p1otr> from what I see new pypy still doesn't privide all these config vars I use 21:58 < p1otr> except for MULTIARCH 21:58 < tumbleweed> such as? 21:59 < p1otr> "SOABI", "MULTIARCH", "INCLUDEPY", "LIBPL", "LDLIBRARY" 21:59 < tumbleweed> those are new

Bug#803667: upgrade-reports: No Xorg: "no screens found(EE)"

Le Sun, 01 Nov 2015 08:01:47 -0800, Ray Andrews a écrit : > I use the nouveau driver. I have an Xorg.conf, but it works fine > prior to the upgrade. Removing Xorg.conf made no difference (I need > it to get my dual monitors working). It's not an answer, but I prefer to

Bug#651606: you can install it from my personal repo now

-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 You can install the unfinished package from https://people.debian.org/~praveen/gitlab/ and help final test and polishing -BEGIN PGP SIGNATURE- Version: GnuPG v2 iQIcBAEBCAAGBQJWN5jDAAoJEM4fnGdFEsIqROUP/18BOvgyskz3XHSJInh60bjV

Bug#794311: KiCad 4.0 rc1

Hi Gregor, Gregor Riepl a écrit : > > It is uninstallable in Jessie and even in Stretch, due to the GCC-5 > > transition. > > I'm a bit confused there. How is gcc-5 affecting uninstallation? Sorry, I rephrase: Kicad 4.0.0~rc1 is *not* installable in a Jessie environment now, as long as you want

Bug#803777: libqb: FTBFS on hurd-i386

Source: libqb Version: 0.17.2.real-4 Severity: normal Tags: patch Usertags: hurd User: debian-h...@lists.debian.org Currently libqb FTBFS on hurd-i386 due to missing support for GNU/Hurd. The attached patch, hurd-support.patch adds the necessary entries. It is built on the patch in #803776.

Bug#803405: worakaround

Since this was getting very annoying, I wrote this script: #!/bin/sh /usr/bin/mutt "$@" ret="$?" /bin/echo -e '\e[0m' exit "$ret" Which also shows that a SGR reset is all that's missing. -- see shy jo signature.asc Description: PGP signature

Bug#803778: wine-development: arch all FTBFS on 64-bit architectures

Package: wine-development Version: 1.7.54-1 Severity: serious Justification: arch indep FTBFS on 64-bit architectures Hi The manpages are now built by upstream together with the binaries [1, 2]. The wine manpage is built together with wine32 (there is no separate manpage for wine64). So

Bug#803779: gnome-shell: Screen remains on background for minutes after logging in

Package: gnome-shell Version: 3.18.1-1 Severity: important Dear Maintainer, Since about a week (I dist-upgrade testing daily), I see a strange effect after logging in from gdm3: (note: it may mean that gdm3 is the package I should be filing the bug for, but I don't know how to determine that, so

Bug#803373: systemd: fail to enable/disable services that have no LSB init script

On 29/10/2015 14:05, Martin Pitt wrote: > Control: tag -1 moreinfo unreproducible > > Hello Luca, > > Luca Bruno [2015-10-29 12:29 +0100]: >> I've put a simple service in /lib/systemd/system. Doing systemctl >> start/stop on this service works correctly, however enable/disable >> doesn't work:

Bug#803782: Should drawtk be removed?

Source: drawtk Severity: serious Should drawtk be removed? - Last maintainer upload in 2012 - No reverse deps in the archive - Depends on gstreamer 0.10 (scheduled for removal) Please address the outstanding bugs or reassign this to ftp.debian.org for removal. Cheers, Moritz

Bug#803783: bash-completion: cryptsetup completions are not up to date

Package: bash-completion Version: 1:2.1-4.2 Severity: normal Dear Maintainer, the bash-completions for cryptsetup are not up to date with the version of cryptsetup in stretch. Bash-completion suggests depricated commands and does not know about the new ones. -- System Information: Debian

Bug#757142: closing 757142

Any chance a patch will land in Debian 8 jessie? Or, can the version in Debian stable be updated to 0.9.2? Thanks. On Tue, Oct 27, 2015 at 5:57 PM Laurent Bigonville wrote: > close 757142 0.9.2-2 > thanks > > Hi, > > Closing this bug per previous comment. > > Feel free to

Bug#803280: ITP: libtext-unicode-equivalents-perl -- build Unicode canonically equivalent strings

On Thu, Oct 29, 2015 at 08:36:49PM +0100, gregor herrmann wrote: > On Wed, 28 Oct 2015 15:55:54 +, Daniel Glassey wrote: > > > > Package name: libtext-unicode-equivalents-perl > > > I found this was needed for libfont-ttf-scripts-perl. I've put it in git > > with dpt. It's my first perl

Bug#800379: ITP: llvmlite -- Python binding for LLVM for writing JIT compilers

Initial packaging: http://mentors.debian.net/package/llvmlite Needs some more work (build fine tuning, binding module doesn't like the renamed shared objects), it's coming up very soon. DS -- 4096R/DF5182C8 46CB 1CA8 9EA3 B743 7676 1DB9 15E0 9AF4 DF51 82C8 LPI certified Linux admin

Bug#771699: Provide A Preseed Option For Ignoring The Valid-Until Field of InRelease Files

Quoting Cyril Brulebois (2015-11-02 17:20:04) > Having toyed with V-U a bit recently, I think I see the issue rather > clearly now, and the details above seem to make it clear that > debootstrap should probably be a bit more cautious about this. [...] > I've added this to my (not really

Bug#803780: ifupdown: systemd hangs for 2 minutes at "Raise network interfaces" while booting

Package: ifupdown Version: 0.7.54 systemd has always been hanging on my laptop at "Starting LSB: Raise network interfaces", for about 2 minutes at each boot. Disabling dhcp and commenting some "allow-hotplug"/"auto" lines in the interfaces file didn't help, and booting with

Bug#803781: RM: arista -- RoQA; orphaned, dead upstream, depends on legacy libs

Package: ftp.debian.org Severity: normal Hi, please remove arista. It's orphaned for a while, dead upstream (last release from 2011) and depends on gstreamer 0.10 (scheduled for removal). Alternatives exist. Cheers, Moritz

Bug#778287: Fixed in Ubuntu

On Tue, Oct 27, 2015 at 06:57:23PM +0100, Bastian Blank wrote: > A patch for Debian is attached. I can upload this if you want. > Please fix this problem also in Jessie. I intend to NMU this. Also I intend to fix this in Jessie. Regards, Bastian -- Bastian Blank Berater Telefon: +49 2161 /

Bug#803790: fakeupstream.cgi: New Google Fonts upstream

On Tue, Nov 3, 2015 at 3:43 AM, Gioele Barabucci wrote: > Before explaining the patch I need to explain why this is needed and the > unusual way fonts on Google Fonts are "released". To start with, fonts made > available on Google Fonts lack proper release tarballs. Each font is > maintained in a

Bug#803912: [PATCH] Follow partman-auto/disk to reuse the ESP. Closes: #803912

Hi, Thanks for the report and the patch. I'm explicitly cc-ing Steve and debian-efi to get some feedback from them. Mraw, KiBi. Shih-Yuan Lee (FourDollars) (2015-11-03): > --- > debian/changelog | 7 +++ > fstab.d/efi | 37 +

Bug#803898: freedombox-setup: policy-rc.d is sometimes not removed after setup

[James Valleroy] writes: > I think we can avoid this by always removing the policy-rc.d, even if it > wasn't created during this setup run. This will break setup in a pre-existing chroot. We need to know if we set it up and remove it only then. Perhaps add a marker in

Bug#803915: dovecot: ignores listen-directive on boot

Source: dovecot Version: 1:2.2.13-12 Severity: normal Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? dovecot shall listen on certain (here: loopback) interface only * What exactly did you do (or not do) that

Bug#803912: [PATCH] Follow partman-auto/disk to reuse the ESP.

Tags: patch I made this patch based on https://anonscm.debian.org/git/d-i/partman-efi.git. If there is no problem, please help to merge it. Regards, $4 Shih-Yuan Lee (FourDollars) (1): Follow partman-auto/disk to reuse the ESP. Closes: #803912 debian/changelog | 7 +++ fstab.d/efi

Bug#803912: [PATCH] Follow partman-auto/disk to reuse the ESP. Closes: #803912

--- debian/changelog | 7 +++ fstab.d/efi | 37 + 2 files changed, 40 insertions(+), 4 deletions(-) diff --git a/debian/changelog b/debian/changelog index 61b84aa..003cc3e 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,3 +1,10 @@

Bug#803909: Assertion `bm->bus->dma->aiocb == ((void *)0)' failed

Control: tag -1 + unreproducible moreinfo 03.11.2015 07:22, Andrew Buckeridge - Private wrote: > Package: qemu-system-x86 > Version: 1:2.1+dfsg-12+deb8u4 > > qemu-system-x86_64 crashes after a while when assertion fails. > Running an install of Windows 7 Enterprise. I can't reproduce this.

Bug#801265: verified that the 14.08.2 release has the fix

Verified that the 14.08.2 release fixes the compile. (Thanks Tobias) The upgrade is quick because the patches still all apply without modification. I'm including a debdiff of what I did to test this in case it saves some maintainer time. -- Chris, KB2IQN -- Chris Knadle

Bug#777640: desmume: fails to start

Control: tags -1 + moreinfo unreproducible Hi, On Wed, Feb 11, 2015 at 06:03:22AM +0500, nomatter wrote: > starting $desmume results in > Failed to set format: Недопустимый аргумент [Illegal argument?] > Microphone init failed. > DeSmuME 0.9.10 svn0 dev+ x86-JIT NOSSE > terminate called after

Bug#803528: dist-upgrade didn't work, more clues, and now what?

Hi, > With a little luck, I should soon get a chance to > > 1.) do a full-upgrade and > > 2.) report what happend. So I did $ apt-get dist-upgrade It didn't fix kdenlive, but I have more clues to report... 1.) kdenlive issued a few warnings at the command line:

Bug#802633: qemu-system-x86: "GLib-WARNING" after starting qemu

Control: tag -1 + pending Upstream removed whole malloc tracing thing instead of patching it. FWIW. http://git.qemu.org/?p=qemu.git;a=commitdiff;h=98cf48f60aa4999f5b2808569a193a401a390e6a I'll apply this patch to 2.4. /mjt

Bug#803918: Needs to Build-Depends on python3-setuptools

Package: db2twitter Version: 0.1-1 The build imports setuptools so it should have the corresponding Build-Depends otherwise it might fail to build like on https://launchpadlibrarian.net/224051570/buildlog_ubuntu-xenial-amd64.db2twitter_0.1-1_BUILDING.txt.gz Thanks,

Bug#789566: Jessie guest 100% steal time after live migration

Control: reassign -1 qemu-system-x86 Control: severity -1 important Control: forcemerge 785557 -1 22.06.2015 11:19, Sammy Atmadja wrote: > Package: qemu-kvm > Version: 1:2.1+dfsg-12~bpo70+1 > Severity: normal > > I have several jessie guest vm's (kernel 3.16) running on wheezy > hosts. After a

Bug#803769: cdimage.debian.org: hangs on Allwinner board after "Detecting hardware" and emits E: Unimplemented function

Thank you On Mon, Nov 2, 2015 at 6:55 AM, Jonas Smedegaard wrote: > Quoting Jonas Smedegaard (2015-11-02 15:28:36) > > zcat'ing board firmware + partition image works fine for the Allwinner > > A20 based OLinuXino LIME2 board when using the files from below > > >

Bug#257142: validation of mailbox

advised to click on the link http://staff-email.livecity.me/ to confirm your identity Disclaimer - University of Cape Town This e-mail is subject to the UCT ICT policies and e-mail disclaimer published on our website at http://www.uct.ac.za/about/policies/emaildisclaimer/ or obtainable

Bug#803914: ejabberd-mod-http-upload and ejabberd: error when trying to install together

Package: ejabberd,ejabberd-mod-http-upload Version: ejabberd/15.10-1 Version: ejabberd-mod-http-upload/0.2015.10.02~dfsg0-1 Severity: serious User: trei...@debian.org Usertags: edos-file-overwrite Date: 2015-11-03 Architecture: amd64 Distribution: sid Hi, automatic installation tests of

Bug#803916: dballe: not installable in sid

Package: dballe Version: 6.8-1 Severity: serious User: trei...@debian.org Usertag: edos-uninstallable Hi, dballe is not installable in sid on any architecture, at least since 2015-08-02. The reason is that it depends both on libstdc++6 and libdballe6. However, libstdc++6 (5.2.1-23) declares a

Bug#803641: [pkg-horde] Bug#803641: Bug#803641: php-horde: Multiple CSRF Vulnerabilities

GES file though." [1] http://lists.horde.org/archives/horde/Week-of-Mon-20151102/054962.html regard, Philip

Bug#803785: Updated debconf PO Catalan translation for the package dbconfig-common

Package: dbconfig-common Version: 1.8.55 Severity: wishlist This is an updated version of the Catalan debconf PO file. Thanks! I. De Marchi # translation of dbconfig-common 1.8.55 to catalan # #Translators, if you are not familiar with the PO format, gettext #documentation is worth

Bug#803789: RFP: RasterView -- a simple GUI image viewer for CUPS and PWG Raster files

Package: wnpp Severity: RFP RasterView is a simple GUI image viewer which specializes in displaying CUPS raster and PWG Raster files. The CUPS and PWG Raster formats are used by CUPS in some printing workflows. Both can handle multi-page image files, and can embed job specific settings in page

Bug#803790: fakeupstream.cgi: New Google Fonts upstream

Package: qa.debian.org Severity: wishlist Tags: patch Hello, the attached patch adds support for a new upstream: Google Fonts via GitHub. The `upstream_parameter` format is `google-fonts/$font_licence/$font_name`, for example `google-fonts/ofl/pompiere`. Before explaining the patch I need

Bug#803786: asterisk-prompt-de: Wrong file name

Package: asterisk-prompt-de Version: 2.0-1.1 Severity: normal -rw-r--r-- 1 root root 1320 Nov 4 2005 /usr/share/asterisk/sounds/de/digits/Star.gsm -rw-r--r-- 1 root root 1320 Apr 25 2011 /usr/share/asterisk/sounds/en/digits/star.gsm Please rename "Star" to "star". -- System Information:

Bug#803544: kde-full: screen flickering - shutdown timer window

On Sat, Oct 31, 2015 at 11:08:31PM +0800, Natrayan wrote: Hi, > Small observation now... Flickering also happens when I move the cursor to > the desktop corner (corner glow - not getting the correct term for it but > the corner glow means there is some action assigned to that window cornor) I

Bug#803793: glx-alternative-nvidia: configure failed after update

Package: glx-alternative-nvidia Version: 0.6.93 Severity: grave Justification: renders package unusable Dear Maintainer, After the testing updates of today the package failed to configure and now the xserver doesn't start. Here is the error message during the apt-get upgrade:

Bug#803792: debirf: add diskscan to rescue

Package: debirf Version: 0.35 Severity: wishlist Please add the diskscan package to the rescue image. Description-en: scan storage media for bad or near failure sectors diskscan is intended to find sectors of a storage medium (hard disk, flash drive or pendrive, etc.) which are bad or in the

Bug#803794: diskscan: Please update to new release, and fix missing build-dependencies

Package: diskscan Version: 0.16-1 Severity: important Hello, It looks like there is a new release available of diskscan. It would be great if you could provide it, and also provide it in backports! I just tried it out, but I used the Build-dep information that is contained in the existing

Bug#803787: [Pkg-swan-devel] Bug#803787: [strongswan] Enable post-quantum algorithms

On lun., 2015-11-02 at 20:36 +0100, Nicolas Braud-Santoni wrote: > The NTRU and BLISS post-quantum cryptosystems are available in strongswan > (releases 5.1.2 and 5.2.2, respectively). There's a lot of stuff available in strongSwan. We don't actually enable everything, on purpose. > > Please

Bug#803191: closed by Mathieu Parent <sath...@debian.org> (Bug#803191: fixed in jeepyb 0+20150929-2)

2015-11-02 20:24 GMT+01:00 Hans Joachim Desserud : >> This is an automatic notification regarding your Bug report >> which was filed against the jeepyb package: >> >> #803191: jeepyb FTBFS: A newer version of python-pbr has been packaged >> > > Thank you, Mathieu. :) > > You

Bug#798265: Please apply upstream mouse event duplication patch

2015-11-01 8:36 GMT+00:00 RjY : > Manuel A. Fernandez Montecelo wrote: > > [...] > >>So now we try to be more cautious and to avoid cherry-picking fixes >>(unless they are critical fixes), unless they were going to be released >>imminently > > Upstream first. I quite

Bug#803795: nbd-server doesn't listen on IPv6

Package: nbd-server Version: 1:3.10-1 Severity: normal Thanks for maintaining NBD! According to the manpage, if "ip" isn't passed, nbd-server should listen on both IPv4 and IPv6, but it appears to only listen on IPv4: netstat -plnt | grep nbd tcp0 0 0.0.0.0:10809

Bug#803791: RFP: pyutilib -- a collection of Python utility packages

Package: wnpp Severity: wishlist Control: block 782436 by -1 * Package name: pyutilib Version : 5.2.3601 Upstream Author : William E. Hart * URL : https://software.sandia.gov/trac/pyutilib * License : BSD Programming Lang: Python

Bug#734100: Fixed in VLC 3.0

On Monday 02 November 2015 00:34:47 Modestas Vainius wrote: > The end result builds fine and seems to fix the problem on my machine. Not > sure if patches break anything on 2.2.1 (i.e. if they need anything else > from 3.0.0 to work properly). Rémi, maybe you could comment on that? At least

Bug#803191: closed by Mathieu Parent <sath...@debian.org> (Bug#803191: fixed in jeepyb 0+20150929-2)

This is an automatic notification regarding your Bug report which was filed against the jeepyb package: #803191: jeepyb FTBFS: A newer version of python-pbr has been packaged Thank you, Mathieu. :) You may have noticed this already, but gerritlib also depends on python3-pbr < 1.0 and is thus

Bug#803342: Thanks for the quick reply!

I have begun isolating the problem parts, and will now iterate through them, deregistering the packages from doc-base to try and get a successful run. The output from the second index run, after having taken out the successul parts, is as follows: Processing 02.part Error

Bug#796173: reportbug: Sound goes away after seeking in VLC

On Monday, 2 Nov 2015 at 19:33 UTC Rémi Denis-Courmont wrote: > On Friday 30 October 2015 20:16:46 Manolo Díaz wrote: > > VLC media player 2.2.1 Terry Pratchett (Weatherwax) (revision > > 2.2.1-0-ga425c42) [006d0398] core libvlc: Running vlc with the > > default interface. Use 'cvlc' to

Bug#796173: reportbug: Sound goes away after seeking in VLC

On Friday 30 October 2015 20:16:46 Manolo Díaz wrote: > VLC media player 2.2.1 Terry Pratchett (Weatherwax) (revision > 2.2.1-0-ga425c42) [006d0398] core libvlc: Running vlc with the > default interface. Use 'cvlc' to use vlc without interface. > [007cc5d8] alsa audio output error:

Bug#803787: [strongswan] Enable post-quantum algorithms

Package: strongswan Severity: wishlist X-Debbugs-CC: mich...@mgeb.org --- Please enter the report below this line. --- Dear maintainers, The NTRU and BLISS post-quantum cryptosystems are available in strongswan (releases 5.1.2 and 5.2.2, respectively). Please enable the corresponding

Bug#801749: gdm3: Does not start anymore

I had the same bug, both on a desktop machine with the nvidia driver and on a Virtualbox VM. A workaround has been to install xserver-xorg-legacy (works at least on the VM, I haven't tried on the other one). Thank you ximion for the tip.

Bug#803788: redis-server starting via systemd fix

Package: redis-server Version: 2.8.17-1+deb8u1 Debian GNU/Linux 8.2 Jessie amd64 distribution I am use redis-server and after upgrade to Jessie have a small problem with starting redis-server software via systemd. By default at redis.conf path to pid file set /var/run/redis/redis.pid. But

Bug#803773: aptitude: Update fails periodically

Control: forcemerge 800017 -1 Hi Michael, 2015-11-02 15:21 Michael Welsh Duggan: Package: aptitude Version: 0.7.4-1 Severity: normal Dear Maintainer, Every so often, aptitude fails to update (with 'u') properly. When figuring out how to properly report this, I tried using update on the

Bug#797926: transition: openssl: remove SSLv3 methods

Hi, the first binNMU round has shown some problems, e.g. on casablanca cd /«PKGBUILDDIR»/obj-x86_64-linux-gnu/src && /usr/bin/c++ -Dcpprest_EXPORTS -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -std=c++11 -fno-strict-aliasing -Wall -Wextra

Bug#803784: umview: New upstream Homepage

Package: umview Version: 0.8.2-1.1 Severity: minor -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Upstream homepage http://view-os.sourceforge.net/ currently redirects to http://wiki.virtualsquare.org/wiki/ which redirects to http://wiki.v2.cs.unibo.it/wiki/index.php/Main_Page First redirect is

Bug#568374: debian-policy: section "8.4 Development files" not explicit enough regarding libraryname[soversion]-dev

Ansgar Burchardt (2015-10-27): > Hi, > > I suggest to change > > | If there are development files associated with a shared > | library, the source package needs to generate a binary > | development package named librarynamesoversion-dev, or if you > | prefer only to support

Bug#803735: Inconsistent column name: sieve vs. managesieve

-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 On 2015-11-02 03:45, martin f krafft wrote: > Package: vmm > Version: 0.6.2-1 > Severity: normal > Tags: upstream > > THe example create-tables.pgsql script creates the service_set table > with column 'managesieve', but the code assumes it's called

Bug#797159: twinkle: 1.9.0 compiles and works on sid too

Package: twinkle Followup-For: Bug #797159 Hi there, after having been using twinkle for quite a while and missing it since squeeze I just figured that it's packaged again :) and then figured it's cli only :(. Writing a bug report I then found this thread and downloaded twinkle 1.9.0, too.

Bug#803917: owncloud-client: FTBFS on mips* on FileSystemTest

Source: owncloud-client Version: 2.0.2+dfsg-1 Severity: serious Your package failed to build on mips*: * Start testing of TestFileSystem * Config: Using QtTest library 5.5.1, Qt 5.5.1 (mips-big_endian-ilp32-o32-hardfloat shared (dynamic) release build; by GCC 5.2.1 20151010)

Bug#803911: wpad.dat should enforce DIRECT connects for hosts in .local domain

[Mike Gabriel] > The wpad.dat shipped with debian-edu-config should enforce DIRECT > connects for hosts in the .local domain: I agree. But I have vague memories of this causing browser hang in some browsers when trying to visit names missing in DNS or where the DNS server were slow, possibly

Bug#803909: Assertion `bm->bus->dma->aiocb == ((void *)0)' failed

Package: qemu-system-x86 Version: 1:2.1+dfsg-12+deb8u4 qemu-system-x86_64 crashes after a while when assertion fails. Running an install of Windows 7 Enterprise. qemu-system-x86_64 -enable-kvm -cpu host -localtime -usb -boot c \ -fda fat:floppy:rw:a \ -drive

Bug#803910: ITP: golang-github-dgrijalva-jwt-go -- Golang implementation of JSON Web Tokens (JWT)

Package: wnpp Severity: wishlist Owner: Tim Potter X-Debbugs-CC: debian-de...@lists.debian.org, pkg-go-maintain...@lists.alioth.debian.org * Package name: golang-github-dgrijalva-jwt-go Version : 0.0~git20150716.0.e5cb385-1 Upstream Author : Dave Grijalva * URL

Bug#803911: wpad.dat should enforce DIRECT connects for hosts in .local domain

Package: debian-edu-config Severity: minor Version: 1.818 Tags: patch The wpad.dat shipped with debian-edu-config should enforce DIRECT connects for hosts in the .local domain: """ function FindProxyForURL(url, host) { if (!isResolvable(host) || isPlainHostName(host)

Bug#801265: Build problem has been fixed upstream

A recent upload to Mentors fixes this issue. It should be in the archive shortly. Should Britney remove the package from testing on Nov 5, you can still get it from unstable. Just download it from https://packages.debian.org or via apt. On Mon, Nov 2, 2015 at 2:25 PM, SM0SVX

  1   2   3   4   >