I tested your supplied code with Pipewire 0.3.63-1, and reproduced the bug.
Package: neomutt
Version: 20220429+dfsg1-4.1
If my .muttrc configuration includes the line:
set smtp_authenticators="gssapi"
then Neomutt gives an error on startup while processing the
configuration file, citing the above line: "Option smtp_authenticators:
gssapi is not a valid
Package: libgl1-mesa-dri
Version: 10.1.2-1
Severity: normal
ld /usr/lib/x86_64-linux-gnu/dri/nouveau_dri.so gives the following:
/usr/bin/ld.bfd.real: warning: libLLVM-3.4.so.1, needed by
/usr/lib/x86_64-linux-gnu/dri/nouveau_dri.so, not found
Can you recompile/relink with libLLVM-3.4.1.so.1?
Package: libcore-ocaml
Version: 107.01-5
Severity: normal
The following packages have unmet dependencies:
libcore-ocaml : Depends: ocaml-base-nox-3.12.1 which is a virtual package.
Upon trying to install libcore-ocaml-dev I get these additional dependency
issues:
The following packages
Paul Gevers elb...@debian.org wrote:
On 22-02-14 20:07, Emilio Pozuelo Monfort wrote:
And we can revert the Orca change and keep binding orca+q to quit
orca (that's a one-liner patch). Or leave it as is (as super+alt+s
does that too) and see if we hear any complaints. Thoughts?
I don't
Luke Yelavich luke.yelav...@canonical.com wrote:
On Mon, Oct 28, 2013 at 03:20:36PM PDT, Luke Yelavich wrote:
here is a patch based on jason's work, with some more improvements. This
patch applies against the current dotconf packaging in Debian unstable.
Jason, if you could possibly
It compiled and installed here with your latest patch applied.
Thanks.
Jason.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Luke Yelavich luke.yelav...@canonical.com wrote:
On Mon, Oct 28, 2013 at 03:44:19PM PDT, Jason White wrote:
If you can, I would suggest moving this into a Git repository.
Sure can do, just not sure where to host it. I don't have a github account
and don't plan to get one, and the package
/brltty.service.
Here is a patch. Review and improvements are most welcome.
From ca26011b0b4a7eef89e48c5d68f7bbab7f1c54c3 Mon Sep 17 00:00:00 2001
From: Jason White ja...@jasonjgw.net
Date: Sat, 19 Oct 2013 18:03:31 +1100
Subject: [PATCH] Add systemd service.
---
debian/brltty.service | 30
Package: consolekit
Version: 0.4.6-3+b1
Severity: normal
I'm running systemd under unstable, with all packages up to date.
Whenever I switch between virtual consoles I get this error in syslog:
Oct 20 09:34:36 jdc console-kit-daemon[2888]: (process:6803): GLib-CRITICAL
**: g_slice_set_config:
).
+ * Update standards-version to 3.9.4.
+
+ -- Jason White ja...@jasonjgw.net Tue, 30 Jul 2013 10:49:17 +1000
+
dotconf (1.0.13-3) unstable; urgency=low
* Correctly make use of realloc, to prevent applications using dotconf from
diff --git a/debian/compat b/debian/compat
index b8626c4
Package: libdotconf-dev
Version: 1.0.13-3
Followup-For: Bug #637652
It's available at git://github.com/williamh/dotconf.git
There have been a few small bug fixes since the 1.3 release, so we probably
want the latest version from the master branch rather than the tagged release.
--
To
Sam Hartman hartm...@debian.org wrote:
Hi. I noticed that espeak as an emacspeak speech server is basically
unusable if you're using pulse, which is kind of the default
configuration in wheezy.
I have just tested this. Whether or not the patch is applied (i.e., before and
after upgrading to
for this. Anyone with a better solution is welcome to
offer it.
From d47ee05d303762567f27c4aae2729d297c52f0f5 Mon Sep 17 00:00:00 2001
From: Jason White ja...@jasonjgw.net
Date: Tue, 14 May 2013 10:33:51 +1000
Subject: [PATCH] Rebuild object files with AUDIO=runtime after building static
library without
.
From cf92768d5d2a46dd3f253eacd82e577fcec9753d Mon Sep 17 00:00:00 2001
From: Jason White ja...@jasonjgw.net
Date: Sun, 12 May 2013 18:10:40 +1000
Subject: [PATCH] Don't override compiler flags from the environment in
Makefile.
---
debian/patches/compiler-flags | 13 +
debian
Having built with debug symbols, I can confirm this bug: we're invoking
PortAudio even when Pulse is active.
Maybe the best solution at this point would be to ask upstream to sort out the
code in src/wave.cpp.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject
Reece Dunn mscl...@googlemail.com wrote:
Are you sure the AUDIO=runtime flags are being set during the build?
In line 30 of src/Makefile, espeak sets AUDIO=portaudio. This could be
overriding the AUDIO setting like CXXFLAGS were being overrided in bug
#707925.
If AUDIO=runtime is built
Here's a simpler patch for this.
From 039e1c575d547617a22ef041c2b046f765917f46 Mon Sep 17 00:00:00 2001
From: Jason White ja...@jasonjgw.net
Date: Mon, 13 May 2013 09:54:46 +1000
Subject: [PATCH] Pass compiler flags on make command line so they won't be
ignored.
---
debian/rules | 4 ++--
1
Luke Yelavich luke.yelav...@canonical.com wrote:
tags 707925 pending
Still need to revert 8325799240b78caa949697860fb1c43a8d0fa814
the newer patch supersedes the one I sent with the bug report.
Thanks.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of
Package: espeak
Version: 1.47.07-1
Severity: normal
This might explain some of the issues that people have been experiencing with
ESpeak lately.
Debian properly enables the AUDIO=runtime compilation option, but gdb shows
that even when PulseAudio is running on my system, PortAudio functions
Jude DaShiell jdash...@shellworld.net wrote:
From what I understand, kde offers ktts and jovie. I don't know that
the combination constitutes a full screen reader solution though and it
may not be feasible to extend espeakup into kde.
The plan, so far as I understand it, was ultimately to
Jann Schneider jann.schnei...@googlemail.com wrote:
I cannot read the shutdown options in Debian 7 RC2. When i use my users menu
in the top menu, navigate down to shutdown and press enter, i can't read
anything more. Neither speech or braille is giving anymore output. Usually i
just press
Package: lynx-cur
Version: 2.8.8dev.14-1
Severity: normal
Here is an example:
Script started on Wed 31 Oct 2012 19:09:38 EST
jason@jdc:~$ lynx http://code.google.com
Looking up code.google.com
Unable to locate remote host code.google.com.
Alert!: Unable to connect to remote host.
lynx: Can't
Package: libatk-adaptor
Version: 2.5.3-3
Priority: important
I am running Sid with everything up to date, including atk-adaptor 2.5.3-3.
Upon starting a Gnome session, I am unable to access gnome-shell and the
following error messages appear in ~/.xsession-errors:
** (gnome-shell:20547):
Package: dbus
Version: 1.6.8-1
Severity: normal
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
I ran, e.g., aplay from the console (no X11 running) with PulseAudio installed
and configured.
* What was the outcome of
Upon investigation, this probably isn't the cause of my PulseAudio problem - my
apologies.
I'm still getting those error messages, though, from the console.
I'm not sure whether this is a bug or not anymore.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject
Package: biber
Version: 0.9.9+release-1
Severity: wishlist
The documentation for this software (biber.pdf) is available from Sourceforge
but not included in the package. As a result, the texdoc command fails to find
it. (According to the biber(1) manual page, texdoc biber should retrieve the
Jonathan Nieder jrnie...@gmail.com wrote:
Thanks for reporting, and sorry for the long silence.
That's understandable.
Do you still have access to this hardware? If so, would you still be
interested in pursuing this bug? (No is an ok answer, but please do
let us know so we can plan
Here is a backtrace. This time, there weren't any interesting or unusual
messages in ~/.xsession-errors. The user's name did not appear on the top
panel, as reported earlier. The backtrace was obtained by attaching to the
process.
(gdb) thread apply all bt full
Thread 5 (Thread 0x7fe7b2c2c700
Package: gnome-shell
Version: 3.4.2-1
Severity: important
I run Gnome via startx from console sessions. This usually works correctly, but
sometimes, Gnome-Shell occasionally hangs - it is completely unresponsive
after loading. I suspect a race condition somewhere.
It has been observed that the
Jean-Philippe MENGUAL mengualjean...@free.fr wrote:
Hi,
To have orca as automatic started application at the gnome starting, I
don't find any solution via the GUI. So I did the cp suggested, and I
realised that ~/.config/autostart doesn't exist by default and needs to
be created by hand.
Jean-Philippe MENGUAL te...@accelibreinfo.eu wrote:
Package: gnome-settings-daemon
I don't think gnome-settings-daemon is involved here. I would report it as a
bug against gnome-orca in the first instance.
Version: 3.4.2-4
Severity: important
I don't think this qualifies as important, which
Do you still experience the bug if you load Gnome-shell rather than fallback
mode?
I'm not experiencing it, but I am loading Orca as an autostart application and
I am using Gnome-shell, not fallback.
You could also try loading Orca as an autostart application just to see if
that makes a
Package: iceweasel
Version: 10.0.6esr-1
Severity: normal
Debian now uses the Gnome 3 accessibility infrastructure (AT-SPI 2, Orca 3.4,
etc.). Iceweasel 10.x is unable to detect that accessibility is enabled under
Gnome 3 and it is therefore inaccessible to Orca users unless work-arounds are
in
Package: auctex
Version: 11.86-10
Followup-For: Bug #679712
After upgrading to Emacs 24 in Sid, it was necessary to make the following
change in /etc/emacs/site-start.d/50auctex.el to load AUCTeX mode:
commit d6e2d76d1498a134a275b36d53ae5e5d866614c9
Author: Jason White ja...@jasonjgw.net
Date
mike stopka msto...@jmshosting.us wrote:
Package: gnome-orca
Version: 3.4.2-2
Severity: important
You seem to have left out the text of your bug report. Perhaps you made a
mistake when editing?
Could you follow up with a description of the problem, including any necesary
log messages and
mike msto...@jmshosting.us wrote:
hi,
once i start orca speakupd dies and flashes words down the screen but i
can't find anything that woood point to why it is failing any suggested
places to look? rebooting brings speakup back.
Is there anything relevant in /var/log/messages?
How is
Hi,
Another suggestion: try turning Speakup off before you start your X session.
In the laptop keyboard layout, it's caps lock-enter, and I can't remember what
it is in the desktop layout. Those who use Speakup will know.
So, turn off Speakup, start your X session and run Orca.
This may work
Sylvestre Ledru sylves...@debian.org wrote:
Anything special about your system / install I should know ?
Nothing that comes to mind, but see discussion below.
with amd64:
$ clang -O3 -g -o test plop.c
$ gdb test
GNU gdb (GDB) 7.4.1-debian
[...]
Reading symbols from /tmp/test...done.
Package: clang
Version: 3.1-4
Severity: normal
To reproduce this, suppose we have a simple test program such as:
#includestdio.h
int main() {
int i;
for (i = 1; i = 10; i++)
printf(%-6d%-6d\n, i, i*i);
return 0;
}
After compiling with clang -g -o test test.c
(gdb) start
Temporary
Package: libparse-debcontrol-perl
Version: 2.005-3
Severity: normal
If the first line of the control file is a comment and I run dch -i, which
invokes libparse-debcontrol-perl, I get:
Parse error: invalid key/value stansa at line 1 of data (### Do not edit!
This file is auto-generated from
Mario Lang ml...@debian.org wrote:
BRLTTY should be installable by default without giving anyone trouble,
thats one of your really big goals for long term.
That's fine, but meanwhile the only solution is not to install it.
In general, I don't think BRLTTY should be installed unless the user
Witold Baryluk bary...@smp.if.uj.edu.pl wrote:
I just wanted to add, that I and my few other friends living on sid have
similar problem. Various serial devices (microcontroler programators, 3d
printers, usb-serial converters) stoped working due brltty messup. And brltty
installed
Package: gnome-shell
Version: 3.2.2.1-4
Followup-For: Bug #668365
I am seeing this after running dist-upgrade today (under Sid).
From /var/log/syslog:
May 5 13:10:40 jdc kernel: [16574.331243] gnome-shell[28802]: segfault at 10
ip 7f54dfd0 sp 7f5a6030 error 4 in
Michael Biebl bi...@debian.org wrote:
It's a different bug
You have made a partial upgrade of libcogl. Your version of gnome-shell
tries to load both libcogl9 (via libcogl-pango_1.10.2-2) and libcogl5.
I downgraded to libcogl-pango_1.8.2-1 (testing), which was enough to work
around it for
Matija Grabnar mat...@serverflow.si wrote:
I can confirm that I am seeing this problem, too.
emacs -nw blocks, eating 100% CPU and not accepting any
input. The only way to get out of it is to kill emacs from
another session.
It's the same here when I invoke Emacs from a virtual console.
Shane Wegner sh...@debian.org wrote:
Traceback (most recent call last):
File /usr/lib/pymodules/python2.7/orca/speech.py, line 100, in
_initSpeechServer
[''])
ImportError: No module named gnomespeechfactory
Gnome-Speech is obsolete and was removed in Gnome 3.
You need to use
Christian PERRIER bubu...@debian.org wrote:
See last comment by Nicolas. If I understand correctly, he deactivated
utmp logging in last upstream release because he was thinking that
using pam_lastlog would be enough nowadays.
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=605329
is the
I upgraded another machine (my laptop) to login 4.1.5-1, which was enough to
reproduce the bug.
Is everyone who upgrades seeing this, or is it specific to a particular
configuration?
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble?
Samuel Thibault sthiba...@debian.org wrote:
Mmm, no begin should really stay at the beginning of the buffer. But if
you need that to get things done I guess it's because p - begin becomes
greater than 250? That rather means that we have to increase the size
of the buffer, as is already done
Samuel Thibault sthiba...@debian.org wrote:
The fixes I have added to the Debian package should be enough. They
at least permit to open almost all Daisy consortium-provided examples
(others require more implementation). So at worse, if upstream does not
upgrade to libxml in time for the
Eric Dumazet eric.duma...@gmail.com wrote:
Which driver handles this Traverse Solos card ?
solos_pci, which also requires the atm module.
(I'm just trying to help here; I'm not affected by the bug.)
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of
Nicolas François nicolas.franc...@centraliens.net wrote:
Are you using pam_lastlog for login? (/etc/pam.d/login)
I am also experiencing this bug. From /etc/pam.d/login:
sessionoptional pam_lastlog.so
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject
Package: yasr
version: 0.6.9-2
Severity: normal
Yasr allows extended characters (with the high bit set) to be sent to a
DECTALK Express. Some of these characters cause the synthesizer to crash,
after which it must be power cycled.
I have implemented a local solution that excludes high-bit
Samuel Thibault sthiba...@debian.org wrote:
Agreed. Can you perhaps handle submitting the patch upstream too?
I've forwarded the bug submission to Mike, who I think also monitors
debian-accessibility anyway.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a
Erik Sundin lassiethebr...@gmail.com wrote:
The program hangs with the message Reading Ö... displaying in the
top left corner directly after startup. Nothing seems to happen after
that... This occurs both when running it whitout any arguments
(presumably it then attempts to play from
Package: chromium
Version: 16.0.912.75~r116452-1
Severity: wishlist
According to the Debian changelog, native client is currently not included in
the package.
I am aware of at least one free/open-source Web tool that relies on it (namely
Google's ChromeVox accessibility extension with the SVOX
Package: ttytter
Version: 1.2.4-1
Severity: normal
When I run this version of TTYtter, it downloads the latest posts from my
contacts but, instead of returning to the TTYtter prompt, it returns to the
shell prompt.
However, ps shows that TTYtter is still running, and it continues to write the
Package: hpodder
Followup-For: Bug #641046
I am not experiencing this bug with version 1.1.5.0+nmu2, but I do experience
it with nmu3.
Nmu3 upgraded the package to build with ghc 7, suggesting a possible
compatibility issue here.
-- System Information:
Debian Release: wheezy/sid
APT prefers
Package: ttytter
Version: 1.2.2-1
Severity: normal
When run with Perl 5.14 (which is current in debian Sid) I get:
TTYtter requires 'unsafe' Perl signals (which are of course for its purposes
perfectly safe). unfortunately, due to Perl bug 92246 5.14+ cannot set this
feature itself. set in your
Package: hpodder
Version: 1.1.5.0+nmu3
Followup-For: Bug #641046
I am also experiencing this bug.
The following Ubuntu bug appears relevant:
https://bugs.launchpad.net/ubuntu/+source/hpodder/+bug/494069
and I can confirm that with a very recent hpodder update, the abc.net.au feeds
mentioned in
) is smaller than clip_begin (1160.734000).
This is not possible!
Daisy-player can't handle this DTB.
Here's my patch so far.
commit a7d81ada5baeeca158eef45ce2c7da6b21cba6ff
Author: Jason White ja...@jasonjgw.net
Date: Mon Sep 19 18:31:53 2011 +1000
Work on attribute parsing bug.
diff
Package: daisy-player
Version: 7.0.4.1-1
Severity: normal
-- System Information:
this is the first book that I tried, so I'm not sure how general the problem
is.
Daisy-player parses the book, presents the table of contents, followed by
reading closing announcement, then aborts with the corrupt
Having started debugging this, it appears that we reach line 529 of
daisy-player.c, i.e., read() returns -1.
Interestingly, errno = 0 according to gdb, i.e., print errno shows a value
of 0.
We are at the end of the file, apparently: print p shows /html as the
content of the buffer.
--
To
maximilian attems m...@stro.at wrote:
any update on newer 3.0 linux images from testing?
The problem hasn't occurred yet with the 3.0.0-1 kernel. Even with laptop-mode
not loaded, it still sometimes occurred under 2.6.39.
If my poweroff operations continue to succeed under 3.x for a while, we
Antonio Borneo borneo.anto...@gmail.com wrote:
Hi Jason,
I added in copy the list vpnc-devel.
That's a good idea.
In the fix you provide,
1) you add ;s/ipid 0x//g at the end of string.
This does not impact backward compatibility. I'm in favour to commit it.
Could you please
Package: vpnc
Version: 0.5.3r449-2.1
Severity: normal
The provided vpnc-script is not compatible with recent versions of iproute,
apparently, as the output format has changed corresponding to version 2.6.39
and later of the kernel. (It isn't clear to me whether the change was in the
kernel itself
Package: unoconv
Version: 0.4-1
Severity: normal
The unoconv script uses deprecated command line arguments of soffice (as of
LibreOffice 3.4.3). The following warnings are issued:
Warning: -headless is deprecated. Use --headless instead.
Warning: -invisible is deprecated. Use --invisible
Bjørn Mork bj...@mork.no wrote:
Nope, sorry. isc-dhcp-client has no support for ppp interfaces, which
makes it useless for lots of people. See e.g. xs4all's IPv6 access
service.
I have a similar need: the ISP provides DHCPv6 prefixes using prefix
delegation, e.g., a /60. This has to be
Package: cups
Version: 1.4.7-1
Followup-For: Bug #630556
After upgrading to 1.4.7-1, I can't print either with the usblp kernel module
loaded or without it.
From /var/log/syslog (with usblp not loaded):
Jul 15 11:18:47 jdc kernel: [ 9498.992515] usb 1-7: usbfs: process 19055 (usb)
did not
Package: cups
Version: 1.4.6-8
Severity: normal
After the usblp module was blacklisted and Cups switched to its new USB handler,
as of 1.4.6-8, I started experiencing problems printing to my HP LaserJet 2430
printer via the USB port, as follows.
No errors were reported in syslog or
Moritz Mühlenhoff j...@inutil.org wrote:
On Mon, Apr 25, 2011 at 11:29:13AM +1000, Jason White wrote:
Laptop-mode appears to be the cause; can you reproduce the bug by enabling
it
on your X200?
How did you activate the laptop mode on your system?
If I install laptop-mode-tools
Moritz Mühlenhoff j...@inutil.org wrote:
Hmm. I'm having a X200 myself and it powers down just fine with the current
sid kernel.
Are you using laptop-mode? I'll try it without this. BIOS differences are
another possibility, I suppose.
Possibly relevant is the fact that acpitool reports,
Laptop-mode appears to be the cause; can you reproduce the bug by enabling it
on your X200?
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
I've just tested this again, and the bug is still present as of the latest
package incorporating 2.6.38.4:
Linux jpc2 2.6.38-2-amd64 #1 SMP Sat Apr 23 18:47:49 UTC 2011 x86_64 GNU/Linux
After completing the normal shutdown (unmounting file systems, etc.), the
machine appears to stop very briefly
Package: linux-2.6
Version: 2.6.38-3
Severity: normal
After upgrading to 2.6.38-2-amd64, my Lenovo X200 laptop reboots instead of
powering down when I run the poweroff command (or equivalently shutdown -h
now). That is, the ordinary reboot/shutdown sequence takes place until the
moment at which
Christoph Anton Mitterer cales...@scientia.net wrote:
I've just seen that Fedora ships patches which add support for acls,
xattrs and selinux.
Not sure where the canonical location for these patches is, but they can
be found here:
http://cvs.fedoraproject.org/viewvc/rpms/tar/devel/
which
Package: nfs-common
Version: 1:1.2.3-1
Severity: wishlist
We're missing the idmapd.conf(5) manual page. I checked another distribution
and found it there, however, so it does exist.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble?
Ben Hutchings b...@decadent.org.uk wrote:
It is not included in the upstream source - even though idmapd(8) refers
to it!
That's weird. Fedora have it, howver. Perhaps this is a forward upstream
bug.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of
Package: jodconverter
Version: 2.2.2-5
Severity: normal
jodconverter file.doc file.txt
yields a text file with CR/LF line terminators (i.e., DOS-style rather than
UNIX-style LF line terminators).
tr can fix this easily enough, but I shouldn't have to do it. I appreciate
that this is likely to
Package: isc-dhcp-client
Version: 4.1.1-P1-5
Severity: normal
jpc2:~# dhclient -6 -v eth0
Internet Systems Consortium DHCP Client 4.1.1-P1
Copyright 2004-2010 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
can't create
Atsuhito Kohda ko...@pm.tokushima-u.ac.jp wrote:
Hi Jason,
On Wed, 28 Apr 2010 14:35:58 +1000, Jason White wrote:
Lynx reports that the client does not support HTTPS URLS,
which is a regression compared with previous versions.
I can't believe there is any regression in supporting
Package: lynx-cur
Version: 2.8.8dev.3-1
Severity: normal
Lynx reports that the client does not support HTTPS URLS,
which is a regression compared with previous versions.
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'),
Iustin Pop iu...@k1024.org wrote:
Pwsafe does the right thing here. mlock default limit is 64K, and pwsafe
binary requests (on my system) 69K. After increase the memlock limit,
there are no warnings anymore.
Thank you; that fixed it. Perhaps it merits a note in the README file.
Regards,
maximilian attems m...@stro.at wrote:
aboves error message shows that there is no initramfs passed by the
bootloader. which grub or lilo do you use?
Grub 2. Regenerating the initramfs is what I tried first, but it didn't help.
I'll try to investigate further.
--
To UNSUBSCRIBE, email to
maximilian attems m...@stro.at wrote:
upps sorry, wrong message previously got confused.
invoke *if and only if* sda is your harddisc where boot loader is on
install-grub /dev/sda
update-grub
also check that you completed upgrade from grub to grub2.
I can confirm the latter; Grub 2
I ran grub-install /dev/sda and (just to be sure) rebuilt the initramfs. After
rebooting, kernel 2.6.33-2 loaded successfully.
Thank you for the help. I don't know why everything wasn't updated
automatically; perhaps grub-pc 1.98 didn't re-install itself during the
upgrade.
--
To
Package: linux-2.6
Version: 2.6.33-1~experimental.4
Severity: normal
linux-image-2.6.32-3-amd64 is fine, but linux-image-2.6.33-2-amd64 from
experimental won't boot.
As I can't see the screen, I'm relying on others to report the error message,
which is approximately as follows.
Kernel panic -
Package: openswan
Version: 1:2.6.23+dfsg-1
Severity: normal
I can reproduce this both on my desktop machine and in a KVM guest.
When OpenSwan starts up during boot, it fails to acquire the IPv6 address
assigned to my eth0 interface. Consequently, the IPv6 tunnels defined in
/etc/ipsec.conf
ipsec auto --status | grep eth0 is as follows after boot:
000 interface eth0/eth0 192.168.0.2
After restarting the daemon:
000 interface eth0/eth0 2001:44b8:702a:4770::2
000 interface eth0/eth0 192.168.0.2
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a
Package: libnss3-tools
Version: 3.12.5-2
Severity: normal
There is documentation
at http://www.mozilla.org/projects/security/pki/nss/tools/
but it still needs to be provided under a suitable licence and included in the
package - preferably, converted to manual pages.
--
To UNSUBSCRIBE, email
I notice this bug is still open.
Has it been decided whether to package dnssec-conf or, if not, how dnssec
look-up should be configured under debian?
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Package: linux-2.6
Version: 2.6.32-2
Severity: normal
I am experiencing the problem described here:
http://article.gmane.org/gmane.linux.kernel/927536/
after upgrading to the 2.6.32 kernel.
The symptom is that after boot, the current virtual console is not tty1, but
instead, for example, tty6
From discussion on the Btrfs list, the reason for this behaviour is that, if
the file is empty (thus containing no data extents) the ioctl() call returns
EINVAL.
It has been suggested on the Btrfs list that it should return success instead,
so that the caller doesn't have to check for the empty
Package: coreutils
Version: 8.0-2
Severity: normal
ja...@vrtl:~$ touch testfile
ja...@vrtl:~$ cp --reflink testfile testfile2
cp: failed to clone `testfile2': Invalid argument
I am running kernel 2.6.32 with a Btrfs root file system under KVM, x86-64
architecture.
It was suggested on the Btrfs
Jim Meyering j...@meyering.net wrote:
Can you rerun that via strace and send the log at least
to the bug-coreutils list (Cc'd)?
strace -o log cp --reflink testfile testfile2
It opens both files and then performs the ioctl() call:
ioctl(4, 0x40049409, 0x3) = -1 EINVAL
Josef Bacik jo...@redhat.com wrote:
On Sun, Dec 13, 2009 at 12:29:03AM +, Jason White wrote:
I am testing a Btrfs root file system with Debian (kernel 2.6.32) under KVM.
ja...@vrtl:~$ touch testfile
ja...@vrtl:~$ cp --reflink testfile /tmp
cp: failed to clone `/tmp/testfile': Invalid
maximilian attems m...@stro.at wrote:
you could simply use rootfstype bootarg,
as described in man initramfs-tools.
My mistake was to enter it in uppercase (corresponding to the name of the
environment variable in the script) rather than in lowercase as I should have
done. It works now.
Package: initramfs-tools
Version: 0.93.4
Severity: wishlist
To experiment with BTRFS as the root file system under KVM, I added btrfs and
associated modules to /etc/initramfs-tools/modules and built an initrd image,
which I then installed to an EXT3 partition in the QCOW2 image to be loaded by
Editing scripts.local to hard-code the file system type worked around this
bug.
I suppose this is now a wishlist bug for Btrfs file system type detection.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
1 - 100 of 185 matches
Mail list logo
