the job.
Thank you.
--
Narcis Garcia
__
I'm using this dedicated address because personal addresses aren't
masked enough at this mail public archive. Public archive administrator
should remove and omit any @, dot and mailto combinations against
automated addresses collectors.
s timeout"
You mean all NICs will be tried although first one succeeded already, am
I right?
--
Narcis Garcia
__
I'm using this dedicated address because personal addresses aren't
masked enough at this mail public archive. Public archive administrator
should remove and omit a
Hi Thomas,
And I'm asking about your patch contribution, when no NIC fails:
Will 5 linked NICs get network configuration from all respective
DHCP-served networks, or only first succeeded one?
--
Narcis Garcia
__
I'm using this dedicated address because personal addresses aren't
What is the behaviour if computer has 5 NICs and all of them are linked
to a DHCP-served network?
Will all of them get network configuration or only first succeeded one?
--
Narcis Garcia
__
I'm using this dedicated address because personal addresses aren't
masked enough at this mail
github.com/magnific0/wondershaper/
Debian source link should be updated, to get the latest package's changes
+ Please update your e-mail address on package details.
--
Regards,
Narcis Garcia
__
I'm using this dedicated address because personal addresses aren't
masked enough at this track
systemctl stop apache2
systemctl start apache2
Workaround that worked for me as of Debian 12.1 has been:
a2dismod qos
--
Narcis Garcia
__
I'm using this dedicated address because personal addresses aren't
masked enough at this tracker archive. Public archive administrator
should fix
been done to port it to Python 3, but no official
release for Python 3 is available yet."
--
Narcis Garcia
__
I'm using this dedicated address because personal addresses aren't
masked enough at this tracker archive. Public archive administrator
should fix this against automated
-backports).
By backporting a working version of cgroup-tools , this will make
bullseye consistent with (defaulted) Control Group v2 for userspace tools.
--
Narcis Garcia
__
I'm using this dedicated address because personal addresses aren't
masked enough at this tracker archive. Publ
I suppose webext-sogo-connector needs to be packaged as version(78)
compatible with thunderird 78.
--
Narcis Garcia
__
I'm using this dedicated address because personal addresses aren't
masked enough at this tracker archive. Public archive administrator
should fix this against automated
This guide recommends to use buster-backports repositories on Stable
installations:
https://wiki.debian.org/Diaspora
Please update buster-backports with this fixed package.
--
Narcis Garcia
__
I'm using this dedicated address because personal addresses aren't
masked enough
status 1.
(...)
This may be related to bug #917124
https://bugs.debian.org/917124
--
Regards,
Narcis Garcia
__
I'm using this dedicated address because personal addresses aren't
masked enough at this tracker archive. Public archive administrator
should fix this against automated addresses
I don't find today any filed bug about this in gnome-disks tracker:
https://gitlab.gnome.org/GNOME/gnome-disk-utility/issues
and I'm not finding the way to register a user account to file a new bug
report there.
I've made some testing and bug seems only reproducible with LUKS2
formatted volumes.
Simple:
A) Package gnome-disk-utility with this feature disabled, until bug is
solved.
B) Not including buggy gnome-disk-utility in repositories
Is really dangerous for people to have this possibility to loss their
data, because of a small piece of bad code or bad release decision.
--
Most of M.Thunderbird users aren't CLI users at all.
Most of people who loss Enigmail because of this repository issue,
really loss GnuPG capability unless they use a non-FOSS extension.
Because most of Debian users are only users; neither developers nor
system administrators.
El 15/10/18 a les 22:16, Jonas Meurer ha escrit:
> Hello,
>
> With keeping Thunderbird at version 52 in stretch you mean to keep the
> packages with known security vulnerabilites? For obvious reasons, that's
> not an option.
>
> Cheers
> jonas
>
An obvious vulnerability for user is to not be
Stable packages aren't ready for Thunderbird 60 presence.
It's better to wait for better repository consistence before adding this
update.
Package: thunderbird
Version: 1:60.0-3~deb9u1
Severity: serious
thunderbird:
Breaks: enigmail (< 2:2~) but 2:1.9.9-1~deb9u1 is installed
Breaks: xul-ext-sogo-connector (< 31.0.5-2~) but 31.0.3-3 is installed
thunderbird >= 1:60 should be at stretch-backports instead of stretch
repository,
The good solution for this is to move Thunderbird 60 to
stretch-backports instead of being at normal repository.
Normal users will keep current Enigmail 2:1.9 , current Thunderbird 1:52
and current GnuPG 2.1 and not unstable repositories.
Other users will be allowed to use stretch-backports to
Applications and CMS ask user for username to create their
databases and dedicated accounts. This is not solved with unattended
install of MariaDB server because those programs don't use "sudo", and
new Debian packaging policy seems only friendly with terminal-based
configuration.
Take into
Package: gdebi
Version: 0.9.5.7+nmu1
Severity: grave
Package structure interface appears and it's usable; if user tries
button [Install Package], gksu asks for authorisation and nothing more:
package is not installed and gdebi-gtk disappears.
$ gdebi-gtk AnyPackage.deb
/home/user/.gtkrc-2.0:38:
Better workaround that allows to have updated/stable kernel and works
for my case:
Add boot parameter:
i915.enable_psr=0
to /etc/default/grub (GRUB_CMDLINE_LINUX_DEFAULT)
Then:
$ sudo update-grub
Information from:
https://bugzilla.redhat.com/show_bug.cgi?id=1353008
Debian 9 (amd64) with Gnome in a notebook "HP TPN-C125"
$ lspci -k
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 5500
(rev 09)
Subsystem: Hewlett-Packard Company HD Graphics 5500
Kernel driver in use: i915
Kernel modules: i915
$ lspci -Q -k
00:02.0 Class
E: The method driver /usr/lib/apt/methods/https could not be found.
You need to install this method before:
apt-get install apt-transport-https
__
I'm using this express-made address because personal addresses aren't
masked enough at this mail public archive. Public archive
Where to start?
https://lists.debian.org/debian-cd/2017/06/msg00062.html
__
I'm using this express-made address because personal addresses aren't
masked enough at this mail public archive. Public archive administrator
should fix this against automated addresses collectors.
El 30/11/17
Have present that this bug does not make Gedit "completely unusable to
everyone" (important), but "causes data loss" (grave), and it's a grave
problem when someone uses Gedit to edit configuration files, source code
files or script files:
https://www.debian.org/Bugs/Developer#severities
(Gedit
Sorry, I forgot to test with and without setuid bit:
$ id -un
userA
$ echo "Content text" > file.txt
$ sudo chown userB file.txt
$ sudo chmod u+s,g+rw file.txt
$ nano file.txt
# Modyfy and save: Fine.
$ gedit file.txt
# Modify and save:
Reproduced with Debian 9:
$ sudo journalctl -b -p err
nov 23 14:21:54 system ntpd[1139]: unable to bind to wildcard address ::
- another process may be running - EXITING
$ sudo systemctl status ntp.service
ยท ntp.service - LSB: Start NTP daemon
Loaded: loaded (/etc/init.d/ntp; generated;
Package: udev
Version: 232-25+deb9u1
Severity: minor
This bug can be related to #693763
$ sudo journalctl -b -p err
-- Logs begin at Tue 2017-11-21 22:12:42 CET, end at Thu 2017-11-23
14:22:56 CET. --
nov 23 14:21:22 system systemd-udevd[280]: failed to execute
'/lib/udev/mtp-probe' 'mtp-probe
Reproduced in several computers with Debian 9.2 :
$ sudo journalctl -b -p err
-- Logs begin at Tue 2017-11-21 22:12:42 CET, end at Thu 2017-11-23
14:22:56 CET. --
nov 23 14:21:31 system avahi-daemon[490]: chroot.c: open() failed: No
such file or directory
If that workaround is a solution, please
Worked fine, with no error, on Gedit version 3.10
The problem seems to be, although text file is readable and writable to
owner & group & others, when saving from another user different to file
owner.
--
__
I'm using this express-made address because personal addresses aren't
masked
Nautilus seems to break at same time.
Circumstance can be that files to write has r+w permission for
everybody, but aren't owned by current user (i.e.: root:users)
--
__
I'm using this express-made address because personal addresses aren't
masked enough at this mail public archive.
Package: gedit
Version: 3.22.0-2 (also 3.14 and 3.18)
Severity: grave
(reproduced with amd64 architecture, Gnome desktop)
Problem occurs on 30% of tries
1. Open an existing file with Gedit
2. Modify something
3. Save (i.e. pressing Ctrl+S)
Results:
- Gedit breaks with message:
I've realised this problem because of this software relies on this feature:
www.actiu.net/durruter
__
I'm using this express-made address because personal addresses aren't
masked enough at this mail public archive. Public archive administrator
should fix this against automated addresses
Please try this with Debian 7 and Debian 8 to assume that behaviour has
changed about /etc/network/if-*.d scripts
(either because of ifupdown or udev)
and Debian 9 has lost this up/down triggering feature.
__
I'm using this express-made address because personal addresses aren't
masked
Thanks Guus for the suggestion about netplug as alternative.
Network interface's configurtaion (IP) is already done when hotplugging
the cable.
What is not working on same event is the run-parts of scripts in
/etc/network/if-up.d (as non-Systemd Debian versions did) and maybe
other directories as:
Package: udev
Version: 232-25+deb9u1
Severity: serious
Tested with updated Debian 9 (amd64):
Interface is declared at /etc/network/interfaces :
auto enp2s0
allow-hotplug enp2s0
iface enp2s0 inet dhcp
An executable script:
/etc/network/if-up.d/test1
only runs on boot (per each NIC). If network
Package: linux-image-4.9.0-4-amd64
Version: 4.9.30-2+deb9u5
Severity: important
$ sudo journalctl -b -p err
... kernel: acpi LNXCPU:00: Invalid PBLK length [7]
... kernel: acpi LNXCPU:01: Invalid PBLK length [7]
... kernel: ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments -
ASL declared 5,
Reproduced here with debian-9.1.0-amd64+Gnome
Appending this line:
After=network-online.target
to the [Unit] section of /lib/systemd/system/avahi-daemon.service
then at next boot avahi-daemon message disappears.
--
__
I'm using this express-made address because personal addresses
Package: live-build
Version: 1:20170829
Severity: grave
Tested with Debian 10 (Buster) Live Alpha 1 in a Qemu virtual machine:
debian-live-buster-DI-a1-i386-gnome.iso
Unlike all other LibreOffice programs (lobase, localc, lodraw, loffice,
loimpress, lomath), lowriter and loweb break after
Tested with: debian-live-buster-DI-a1-i386-gnome.iso in a Qemu virtual
machine.
Boot menu option (example):
Debian Live with Localisation Support -> Spanish (es)
Environment variables seem right and make effect over interface words,
but "Input Sources" in desktop environment not: "English (US)"
Package: live-build
Version: 1:20170829
Severity: important
As of Debian 10 (Buster) Live Alpha 1, there is no ISO image such as:
debian-live-buster-DI-a1-i386-standard.iso
CLI sessions are needed to rescue scenarios with low resources or
graphics problems.
Many computers don't reach desktop
Intel NUC5CPYH (detected as NUC5CPYB)
Processor Intel(R) Celeron(R) CPU N3050
$ lspci -nn -k -d 8086:3165
02:00.0 Network controller [0280]: Intel Corporation Wireless 3165
[8086:3165] (rev 81)
Subsystem: Intel Corporation Dual Band Wireless AC 3165 [8086:4010]
Kernel driver in use:
Package: vzdump
Version: 1.2.6-3
Severity: important
When running:
$ sudo vzdump --all --suspend
Fails with:
tar: dev: Cannot rmdir: Directory not empty
(...)
Solution is to comment or remove 3 lines at
/usr/share/perl5/PVE/VZDump/OpenVZ.pm
-if ($snapdir eq $task->{tmpdir} && $snapdir =~
Package: vmdebootstrap
Version: 1.7-1
Severity: important
As commented in debian-live list by Jeff Epler, I should start with
something like:
$ sudo lwr -o hurd.iso --architecture=hurd-i386 -d unstable
but this fails in debootstrap:
E: Couldn't find these debs: linux-image-hurd-i386 acpid
Package: wnpp
Severity: RFP
Copyright: (GNU GPL) 2016-2017 Narcis Garcia
Dear mentors,
I am looking for a sponsor to package and/or upload "sltd"
sltd daemonizes multiple slt instances to accept TLS/SSL connections on
multiple ports, each one to forward traffic to different bac
Package: live-config
Version: 5.20170112
Severity: important
Tags: l10n
No keyboard localisation when choosing "Debian Live with Localisation
Support". For example, choosing "Spanish" at this boot submenu, keyboard
is set to an USA layout (in any X, TTY and pty).
Keyboard layout should do same
>
> You could also download a CD or DVD image and burn 10 or
> 20 discs. That allows installation without internet connection
> on many machines at the same time.
> And you have something to hand out to the people ...
>
> Holger
>
No, I couldn't.
Each one of these discs will download packages
>
> If you are doing an install party, set up a proxy server. That really
> really helps a lot.
>
Not only experts should be able to do an install party; some more people
wants to share small knowledge and experiences.
If you *will* be connected to the internet you *will* need to install
security updates;
Internet is not the only source for packages (). If someone
installs Debian on 3 computers (or repeats installation 3 times), it
shouldn't mean to use 3x internet traffic repeating installer downloads.
A) This
Many people may feel this matter is not important because most of
installations are for traditional PCs, but there are other scenarios
such as TV devices, phone/tablets, VM, etc. with less internal space.
When user selects to (yes) install boot manager, the wizard asks where
to do the grub-install.
Currently, default option in the dialog is to introduce manually the
target path. I propose to change default option by the already detected
path.
Package: debian-installer
Version: 20170615
Severity: important
Tags: d-i
"You have not selected any partitions for use as swap space..."
And default option is to return to the partitioning menu.
This is very confusing to unexperienced users and nonsense with
computers with lots of RAM.
I've
Package: debian-installer
Version: 20170615
Severity: important
Tags: d-i
If any network card is active, installer downloads (updates?) packages
from internet anyway.
Some people need to make and complete offline installs, for example for
bandwidth reasons (and having an usable computer soon).
Package: debian-installer
Version: 20170615
Severity: normal
Tags: d-i
One way to make and complete an offline installation is to select "No
network card", but this produces a non-sense warning talking about
loading drivers, etc. and inviting to change the selection.
If user selects "No network
Package: debian-installer
Version: 20170615
Severity: important
Tags: d-i
It says:
"Failed to partition the selected disk"
"This probably happened because the selected disk or free space is too
small to be automatically partitioned"
Manual partitioning a sigle primary partition (using whole
Package: debian-installer
Version: 20170615
Severity: minor
Tags: d-i
At final stage of interactive installation, the suggested target for
boot manager should be (the only when it's only one) the hard disk drive
instead of manual introduction.
This will make the decision easier to unexperienced
Package: debian-installer
Version: 20170615
It says:
"Bad archive mirror
An error has been detected while trying to use the specified Debian
archive mirror.
Possible reasons for the error are: incorrect mirror specified; mirror
is not available (possibly due to an unreliable network connection);
Vinca it's focused into make easy and flexible the contact between user
and administrator (or between customer and helpdesk).
It's focused to non ideal situations where the user needs intant
assistance, and it could be placed during a simple phone call:
"Hello? Do you use GNU/Linux? Okay, I
Vinca is essentially a tool that a support provider gives or recommends
to a normal user who needs help/desk and cannot deal with x11vnc tips
and tricks.
After a simple installation, user only has to write his/her supporter
address (first time), and the remote listening vncviewer receives remote
Package: wnpp
Severity: RFP
Copyright: (GNU GPL) 2008-2017 Narcis Garcia
Dear mentors,
I am looking for a sponsor to upload my package "vinca"
You can publish the utility to be downloaded and executed by people who
you want to assist to (or your customers). Vinca will care of
Package: wnpp
Severity: RFP
Copyright: (GNU GPL) 2008-2017 Narcis Garcia
Dear mentors,
I am looking for a sponsor to upload my package "vinca"
You can publish the utility to be downloaded and executed by people who
you want to assist to (or your customers). Vinca will care of
Note: trek.eu.org link provided by Trek is not working.
Why a non-private browsing? User activity should be assumed as private
by default.
Proposed defaults:
browser.newtabpage.directory.ping = ""
browser.newtabpage.directory.source = ""
captivedetect.canonicalURL = ""
app.update.url = ""
Package: wnpp
Severity: ITP
Copyright: (GNU GPL) 2012-2017 Narcis Garcia
Dear mentors,
I am looking for a sponsor for my package "durruter"
Durruter is a command-line wizard to manage iptables entries like in a
hardware router web interface. Forward ports and ranges from multiple
I believe that it's very interesting to be supported in the future by
Debian instead of having to install it from third party repository
(Trisquel) or having to use raw Firefox/Chromium at open networks.
IceCat is simply a cleaner Firefox: Unlike TorBrowser and like Firefox,
Icecat works through
Package: wnpp
Severity: ITP
Copyright: GNU GPL (2015-2016) Narcis Garcia
www.actiu.net/sesele
Package: wnpp
Severity: ITP
Copyright: GNU GPL (2012-2017) Narcis Garcia
https://git.actiu.net/
Package: webfs
Version: 1.21+ds1-8.1
Severity: normal
Tags: security upstream
I've trying webfsd 1.21 to serve gobby/infinoted files, but due to those
problems:
http://gobby.0x539.de/trac/ticket/617
https://bugs.archlinux.org/task/18746
People cannot open files easily, and need to open more
67 matches
Mail list logo
