Thanks Mark,
I worked my way through these build instruction and got successfully to Step 15:
There, I don't know to do. What is my target platform? Is it "custom"?
If so, what are the correct values to set?
I also wonder whether that part is optional. In 8./9. I make and install
the
Package: src:linux
Version: 5.19.6-1
Severity: normal
I have a ThinkPad X1 Yoga (4th gen). It has an NFC device built in.
The NFC device appears in the BIOS, and it is enabled there.
However, I cannot see it from Debian at all. Neither lsusb nor
lspci show anything ressembling an NFC device.
I found an upstream bugreport:
https://bugs.kde.org/show_bug.cgi?id=437176
The workaround mentioned there (balooctl purge)
worked for me.
Thanks for your work on Debian.
smime.p7s
Description: S/MIME Cryptographic Signature
I forgot to mention that the following message are printed
at the command line when the message widget opens:
[17::40:54.472] unknown: PostingDB::open MDB_NOTFOUND: No matching key/data
pair found
[17::40:54.472] unknown: PositionDB::open MDB_NOTFOUND: No matching key/data
pair found
Subject: kate: Spurious message 'cannot open folder tags:/'
Package: kate
Version: 4:21.08.2-1
Severity: normal
Disclaimer: this is most likely not a bug in kate, but I don't know
what package to assign this bug report to. Please reassign appropriately.
Every time I open the 'file open' dialog
>> But I guess you had, or some cosmic radiation induced bit switch did it
>> for you on your hard disk ;-) The default for all installations is being
>> on.
> yeah, then lets say "maybe" or "probably" I did that, nevertheless, at least
it was a couple of years ago and I cannot remeber ;-)
I get the same crash, but at every start of the program (i.e. without clicking
at a specific commit). This makes gitg completely unusable for me.
smime.p7s
Description: S/MIME Cryptographic Signature
I still see this with current Testing, but now I sometimes have
the same problem with X11 too. So I guess it is likely that this
is not a Plasma problem but rather a kernel one.
Please feel free to close this. Thanks for your work on Debian.
smime.p7s
Description: S/MIME Cryptographic
Package: plasma-desktop
Version: 4:5.20.5-3
Severity: normal
When I boot and start a Plasma session, the environment variable
QT_SCREEN_SCALE_FACTORS is set:
~> echo $QT_SCREEN_SCALE_FACTORS
eDP-1=1.5;DP-1=1.5;HDMI-1=1.5;DP-2=1.5;DP-1-1=1.5;DP-1-2=1.5;DP-1-3=1.5;
AFAIU this is correct: I
I saw this, too. The latest kernel from unstable fixed it.
smime.p7s
Description: S/MIME Cryptographic Signature
Package: kscreen
Version: 4:5.20.5-1
Severity: normal
Apologies if I am not reporting this for the correct package.
I try the following steps:
1) Reboot my laptop (ThinkPad X1 Yoga) with external monitor plugged in.
The external monitor works as expected.
2) At the SDDM prompt, log into
I (apparently) solved the problem by updating a few plasma packages to 5.19,
in particular
plasma-workspace
plasma-desktop
(and possibly one or two more). They are still at 5.17 in unstable.
smime.p7s
Description: S/MIME Cryptographic Signature
I'm seeing the same thin even with libkscreenlocker5 5.19.5-2 from experimental.
The locked screen is completely black, and wiggling the mouse shows the cursor
but nothing else.
My workaround to unlocking the session is to switch to a TTY shell by
ctrl-shift-2,
and using 'loginctl
Hi Stéphane,
thanks for caring about my bug report. However, you wrote:
> This kind of bug is not specific to Debian. I recommend you register on the
> bugtracker of LO and follow it.
This is indeed what I did before filing the Debian report. In particular,
my Debian report says:
> I filed
Here is the problematic file.
2_Document_cannot_be_opened.docx
Description: MS-Word 2007 document
signature.asc
Description: OpenPGP digital signature
Package: libreoffice-writer
Version: 1:6.1.5-2
Severity: normal
The following problem happens with LO Writer 6.1.5.2 from Debian, but not
with the same version downloaded from https://www.libreoffice.org/download/
I filed an upstream bug:
Package: paraview
Version: 5.4.1+dfsg4-3
Severity: normal
I use a KDE desktop with fractional screen scaling enabled,
more specifically, on my system
~> echo $QT_SCREEN_SCALE_FACTORS
eDP-1=1.5;DP-1=1.5;HDMI-1=1.5;HDMI-2=1.5;
As a result, only parts of the Paraview rendering window are actually
Thanks for asking. In fact, the problem disappeared automatically
during some Qt update (sorry, I don't know which one).
So the bug can be fixed.
smime.p7s
Description: S/MIME Cryptographic Signature
Package: texlive-latex-extra
Version: 2017.20170629-1
Severity: normal
The pdfcomment packages appears to redefine \C, without that being
mentioned in the documentation. This is unfortunate, as \C is a
standard way to typeset the complex numbers. To reproduce the problem,
use the following small
Package: plasma-workspace
Version: 4:5.8.7-1
Severity: normal
File: /usr/bin/krunner
I am trying the Plasma Wayland desktop. I can start krunner by pressing Alt+F2.
However, no matter which one of my four virtual desktops I start it from, it
always switches back to the first desktop, and then
Package: qtbase5-dev
Version: 5.7.1+dfsg-3+b1
Severity: normal
I'm using a Lenovo ThinkPad Yoga 2, which has a touch screen and a stylus.
The stylus triggers Qt tablet events.
Trying to fix a problem in Okular [0], I noticed that the QApplication class
does not receive the events
Package: texlive
Version: 2016.20170123-4
Severity: normal
lualatex does not build documents that use the algorithm2e package.
Minimal working example:
\documentclass{article}
\usepackage{algorithm2e}
\begin{document}
\section{Hallo Welt!}
\end{document}
The error message is
control: reassign -1 xserver-xorg-input-all
I have a ThinkPad Yoga 12, which has a touchscreen. In a normal session, I can
move my finger on the touchscreen, and the cursor will follow the finger. Just
like
it is supposed to.
However, I now plug in an external display. By default, it is
Interesting -- I didn't. And installing it pulled in so much stuff that I am
really surprised now
that plasma ever worked for me.
Anyway. With the plasma-desktop package I have my shell back, and the bug can
be closed.
Gracias, Maximiliano!
signature.asc
Description: OpenPGP digital
¡Hola Maximiliano!
> Can you check the value of the XDG_DATA_DIRS?
it's
/usr/share:/usr/share:/usr/local/share
(I got a konsole using krunner)
signature.asc
Description: OpenPGP digital signature
I have plasma installed along with Mate, but I can't even login right now
because of
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=834593
Is there another way to test whether this is in Mate or in the layers below?
signature.asc
Description: OpenPGP digital signature
... or try the login manager?
In fact, I also see the same effect after a reboot in sddm, before even loggin
into Mate.
So if it is not Mate, what's the correct pacakge for this bug? Can you please
reassign it?
Thanks.
signature.asc
Description: OpenPGP digital signature
Package: mate-desktop
Version: 1.14.1-1
Severity: normal
I am not quite sure what package to report this bug against. Apologies if I
picked
the wrong one.
I have a ThinkPad Yoga 12, which has a touchscreen. In a normal MATE session,
I can
move my finger on the touchscreen, and the cursor
Package: plasma-workspace
Version: 4:5.6.5.1-1
Severity: normal
I am not quite sure what package to report this bug against. Apologies if I
picked
the wrong one.
After a recent update, I cannot log into the KF5 plasma shell anymore. After
entering
the password, the screen becomes black, and
The upstream maintainer has commented on the issue: the root of the issue seems
to
be some unfortunate interaction with the microtype and zref packages. Not
loading
the microtype package (which is not used anyway) will fix the issue. The
maintainer
promised to do this for some upcoming bugfix
Hi Norbert,
thanks for the quick reply. Upstream bug report is
https://bitbucket.org/kleberj/pdfcomment/issue/16/exampletex-does-not-build
Thanks,
Oliver
signature.asc
Description: OpenPGP digital signature
Package: texlive-latex-extra
Version: 2014.20141024-1
Severity: normal
Dear Maintainer,
[caveat: I am not sure whether to report this here or upstream, in particular
since I am not sure whether pdfcomment contains the bug or triggers the bug.
I will gladly report the bug upstream if you consider
Source: adolc
Version: 2.5.2
Severity: important
Tags: patch
Dear Maintainer,
ADOL-C computes wrong second derivatives for the log function in vector mode.
I consider this bug 'important', because you may not even notice right away
that your results are wrong.
The bug has been fixed upstream in
I had a quick look at the package, since the hdf5 FAQ says:
If the build completes properly and the tests pass, then the installation
should be okay.
You need two options for 'configure': --enable-unsupported and --enable-cxx.
Somewhat surprisingly, the first one is already set in debian/rules.
Any chance of having the C++ interface enabled in Debian, even though its 'at
our own risk'?
My problem is the following: I use gmsh a lot, which depends on
libhdf5-openmpi. Hence I am
stuck with the parallel version of hdf5, even though I don't actually use any
of its parallel
features. Now
Hi Roberto,
it does indeed sound related. I have been getting warnings like
may conflict with libblas.so.3 or similar in other occasions too,
but I don't know enough about the background to really tell.
Feel free to merge the bugs and do whatever you find appropriate.
Thanks,
Oliver
Hi Anton,
Problem is, I don't understand how much these rules apply to me, since
the actual upload to unstable will not be done by me. That case is
not covered by the text.
It does not matter, who physically uploads the package e.g. sponsors it.
In this case you are the author of changes.
Am 11.07.2013 22:45, schrieb Anton Gladky:
2013/7/11 Oliver Sandersan...@igpm.rwth-aachen.de:
I don't understand. I am not the maintainer, hence what I am doing
is a NMU, hence the NMU number? Please tell me the version number
you want and I'll use it.
Hmm, please, read, when you are
Add to description something like: Fixing lintiant warnings in manpages.
I will do that, but please comment on my questions below first.
Plus, we are now at dcraw-9.19-1.1, because upstream has made two new
releases
in the meantime.
,,,1.1 is not correct version number. You are not doing
Thanks for the hints, I just uploaded a new version.
That's a thing that I still don't understand. In an AutoTools environment
all you need is configure.in and Makefile.in. The files configure and
Makefile are then created automatically. However when I remove configure
and Makefile from the
Hi Anton,
I finally got around to looking at the package again.
Currently getsource doesn't run due to some minor upstream format change.
Can you fix that?
I fixed the first bug it runs into. It still doesn't seem to work, though.
No idea what is missing.
Yes, but in the previous
Hi Anton,
I finally found the time to look at the dcraw package again.
lintian reports three problems with this package, which I don't
know how to fix:
P: dcraw: no-upstream-changelog
There really is no upstream changelog. What to do?
Id upstream does not ship it, you can do nothing with
Package: src:linux
Version: 3.8.11-1
Severity: minor
Dear Maintainer,
I have a Lenovo ThinkPad X230, running Wheezy and the 3.8.11 kernel from
today's unstable.
The touchpad works okay, in particular the two buttons do what they are
supposed to do.
Unless, that is, I have a finger resting on
,
Oliver Sander
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
requires some
work on it. It would be good to know the opinion of the current
maintainer, whether he interested to continue it.
Thank you,
Anton
[1] http://mentors.debian.net/package/dcraw
On 05/01/2013 08:42 AM, Oliver Sander wrote:
Package: sponsorship-requests
Severity: normal
Dear mentors,
I
A package for the current release 9.19 can now be found at mentors.debian.net
https://mentors.debian.net/package/dcraw
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
I have gotten rid of this hardware. Feel free to close the bug.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: latexmk
Version: 1:4.24-1
Severity: minor
Tags: l10n
Dear Maintainer,
The German description of the latexmk package contains a typo.
aptitude show latexmk
prints text starting with
Letexmk führt LaTex in ...
It should obviously be
Latexmk führt LaTex in ...
-- System Information:
This bug has been fixed upstream, the fix will be in KDE 4.10:
https://bugs.kde.org/show_bug.cgi?id=300051
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: coinor-libipopt-dev
Version: 3.10.2-1.1
Severity: important
Dear Maintainer,
I have code using IPOpt which I ran up until recently with an
old (3.5.5) hand-compiled version of IPOpt. Now I am trying
to use the one in Debian (thanks for packaging, btw!), but
I run into a problem:
Package: coinor-libipopt-dev
Version: 3.10.2-1.1
Severity: normal
Dear Maintainer,
I have written an m4 tests that looks for an installation of ipopt.
While it has worked with hand-installed older versions of IPOpt (=3.5.5),
it doesn't work with the one in Debian, because it fails to link a
test
Package: plasma-widgets-workspace
Version: 4:4.8.4-3
Severity: minor
Dear Maintainer,
I am using a vertical taskbar to save some space on a wide
screen. The plasma clock in that taskbar is rendered
badly. There is about 10 cm vertical screen space between
time and date, and the font for the
Package: libdune-common-dev
Version: 2.2.0-1
Severity: wishlist
File: dune-common-dev
Dear Maintainer,
it would be great if there was a meta-package 'dune-dev'
(or similarly named), which pulled in all dune-related
modules. That would make dune installation easier.
Thanks!
-- System
Source: texlive-extra
Severity: wishlist
Dear Maintainer,
please consider uploading the current movie15.sty file from ctan
with the Wheezy release. That file differs only minimally from the
one currently in testing:
--- /usr/share/texlive/texmf-dist/tex/latex/movie15/movie15.sty 2012-03-29
This issue has been fixed upstream in poppler 0.20 and Okular from KDE 4.9.
Is that reason enough to close this issue?
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Yes, that would be much appreciated. They are now up to 3.19, and the
recent changes are very interesting to me. Thanks!
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: paraview
Version: 3.14.1-1
Severity: normal
Dear Maintainer,
when starting pvpython I get the error message
sander@igel:~$ pvpython
Error converting executable file /usr/bin/../lib/paraview/pvpython to real
path: No such file or directory
And that's all. This is on an up-to-date
Great, looking forward to the next upload then. Thanks.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Hi!
I just tried the 2.6.38 kernel in squeeze-backports, to no avail.
From http://wireless.kernel.org/en/users/Drivers/orinoco I learned that
this is a known issue, and that I should set the wpa_supplicant
parameter ap_scan to 2.
However I can only do that if I stop using networkmanager,
Same patch, this time with diff -u, hope this eases things.
--- xine.1.in 2009-12-19 01:15:31.0 +0100
+++ xine.1.in.patched 2011-05-17 22:33:23.0 +0200
@@ -41,12 +41,12 @@
Setze Stufe der `Geschwätzigkeit'.
.TP
.BI \-\-config\ Datei
-Benutze \fIDatei\fP anstatt anstatt
I happened to have a look at that man page again. It turns out there
are lots of language errors. I checked upstream and the errors exist
there too. So I prepared a patch and sent it to the xine-bugs mailing
list, and now two weeks later I am still waiting moderator approval.
Anyways, here is
I had the same symptoms with an ALPS touchpad in a Dell Latitude E6510.
I found a patch in the following list:
https://bugzilla.redhat.com/show_bug.cgi?id=590880,
which I attach for your convenience. The patch applies cleanly to the
current stable
kernel. It enabled vertical scrolling for me.
Thanks again!
Oliver
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Hi Roberto!
Thanks for the addition to README.Debian. That will be
very helpful.
Regarding pkg-config support, have a look at the source code
of IPOpt 3.9.0
https://projects.coin-or.org/Ipopt/browser/releases/3.9.0#Ipopt
There you'll see a file ipopt.pc.in. That together with a few
changes in
Hi!
I think that this might be the same problem reported in #592324.
I am not sure, because 592324 is a problem during linking, and
what I reported is a run-time problem. However, in the meantime
I moved to a new computer, and now I run into 592324 as well.
I can get the missing symbols
Okay, nevermind, I figured that one out myself. You need to link against
libdmumps-4.9.2 and libdmumps_seq-4.9.2 as well. Hang on.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
I finished testing, and here's the result:
I can link successfully by providing either -ldmumps_seq-4.9.2
or -ldmumps-4.9.2. However, in the latter case the programm
aborts at run time with the same error message as in my original
post. Additionally linking with libmpi does not help.
Hence I
As it turns out, this is a duplicate of 564941. A workaround for the latter
has been described in the README.Debian of kdebase-workspace 4:4.4.5-6.
Hence I'll mark this bug as 'done'.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble?
Would it make sense to do a bisection on the kernels from
snapshot.debian.org
between the one in testing and the one in experimental?
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Sorry for the delay. I tried the patch and it didn't seem to change
anything. Let me know if you're interested in logfiles and such.
Best,
Oliver
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
I tried this again after an update to today's squeeze, with kernel 2.6.32-29
and xserver-xorg-video-intel 2:2.13.0-5. Unfortunately, the problem remains
unchanged: the screen turns black when the frame buffer is switched on,
and there is no way to get a text console let alone X.
I also tried
I just tried linux-image-2.6.37-rc7 from experimental. The problem is still
there.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
I tried this again with kernel 2.6.37-rc7 from experimental and
xserver-xorg-video intel
2:2.13.0-5, from current squeeze. The bug is still there. With rare
exceptions,
pressing Fn-arrow up|down makes the mouse pointer disappear.
--
To UNSUBSCRIBE, email to
I have had this problem for a long time, but it recently got fixed
automatically during a dist-upgrade. It may have been the move
to 3.3.12, but I am not sure. Can the reporters maybe check
if they can still reproduce the bug with an up-to-date installation?
--
To UNSUBSCRIBE, email to
Package: xine-ui
Version: 0.99.6-1
Severity: minor
The German man page for xine contains (at least) twice the
word 'ausbelnden'. This is a typo, it should be 'ausblenden'.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture:
I updated my system and tried again. dragonplayer does play my
DVDs now if it is started from the KDE device manager. When
started from the console the behavior is unchanged: clicking on
the 'Play CD/DVD' button doesn't appear to do anything.
--
To UNSUBSCRIBE, email to
I did some more investigations and it seems to be a udev problem.
I'll reassign the bug report.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Here it is:
# This file was automatically generated by the /lib/udev/write_cd_rules
# program, run by the cd-aliases-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and set the $GENERATED variable.
# QSI_CD-RW_DVD-ROM_SBW242U
I don't recall ever having had a second dvd drive, but still following
your advice gave me the correct link again. Thank you very much!
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Now that xserver-xorg-video-intel 2.13.0-2 appeared in unstable
I tried that package. As was to be expected, together with
the squeeze kernel there is still no functioning display.
On the other hand, with the 2.6.36-rc6 kernel the display and
X appeared to be working property. This seemed like
I don't really see how that solves my problem. I am using the regular
squeeze kernel, and both options are set there. Still I don't have a
working display.
I will follow Cesare Leonardis suggestion in the 600802 thread and
try the kernel and x driver from experimental.
--
To UNSUBSCRIBE,
Of course, but it'll be a few days before I have access to the
machine again.
Am 29.10.2010 00:14, schrieb Cyril Brulebois:
Oliver Sandersan...@mi.fu-berlin.de (27/10/2010):
Thanks for the quick response. Here are the X log and the dmesg
output.
Thanks; could we also get a full
I should mention that this bug and 593432 were the same machine.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
I forgot to mention that I also tried the package
xserver-xorg-video-intel-2:2.13.0+git20101017.33133a1d-1
from http://autobuild.ikibiki.org/. Unfortunately that
didn't help at all.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe.
Thanks for the quick response. Here are the X log and the dmesg output.
best,
Oliver
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 13. Jul 10:27 /etc/X11/X - /usr/bin/Xorg
-rwxr-xr-x 1 root root 1733468 10. Okt
With today's squeeze, the problem is still there.
In fact, what precisely is the bug? Should xine find the drive
in /dev/dvd1 or should my only dvd drive be mounted in /dev/dvd
in the first place?
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of
Package: kaffeine
Version: 1.0-1
Severity: normal
Steps to reproduce:
1) enter a dvd
2) start kaffeine from the konsole
3) in the main menu press 'play dvd'
For a few seconds the viewer window shows me the movie title, and then
the KDE crash handler comes up. Here is what's printed in the
Hi! This really does seem to be the same as 593432. I have also
seen the backlight behavior you describe, and even the problem
with 'nomodeset'.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: openoffice.org
Version: 1:3.2.1-5
Severity: normal
When updating today from openoffice.org 1:3.2.1-4 to 1:3.2.1-5
I got the messages
revoke component
'file:///usr/lib/openoffice/basis3.2/program/libbf_migratefilterli.so'
from registry
Strange. Last night's update must have changed the default
behavior. All of a sudden the content of /etc/modprobe.d/i915-kms.conf
doesn't seem to matter anymore: kms is always off. The only way
to trigger the problem is to add modeset=1 to the boot options.
I guess this makes the problem less
Forget what I said about the default behavior having changed.
This machine is a can full of Heisenbugs! After the fifth reboot,
kms came back with a vengeance. Currently not even the
conf file won't stop it. The only way I have to use
the machine is the kernel from Ubuntu 10.4 that I
Package: linux-2.6
Version: 2.6.32-18
Severity: normal
I cannot connect to a WEP network. The kde network manager
keeps asking me for the password. This is after a complete
reinstall of Debian Squeeze. Connecting to the very same
network worked when the machine was still running Lenny.
One
Package: amarok
Version: 2.3.1-1
Severity: normal
Amarok doesn't play my audio CDs. I have tried two ways:
a) Open amarok from the device manager which correctly
suggests amarok to play the inserted CD. Then amarok
shows n tracks, with n being the correct number of tracks
on the cd. However,
Package: dragonplayer
Version: 4:4.4.5-1
Severity: normal
When I insert a DVD, the KDE device manager applet suggests that
I use dragonplayer to play it. When I pick dragonplayer, the player
opens. I click on 'Play CD/DVD' but nothing happens.
It's the same when I start the player from the
--
* Oliver Sander** email: san...@mi.fu-berlin.de*
* Freie Universität Berlin ** phone: + 49 (30) 838 75348 *
* Institut für Mathematik ** URL : page.mi.fu-berlin.de/~sander
Package: coinor-libipopt-dev
Version: 3.8.3-2
Severity: normal
I have been using a hand-compiled libipopt with a C++ program
for a while. The linear solver for ipopt was ma27 (fortran). The
C++ program was purely sequential, hence there was no need
to mention or have MPI.
Now I want to build
96 matches
Mail list logo
