Hi,
Axel Beckert a...@debian.org writes:
Running screen -rd again does change the behavior.
I'm a little bit confused. Does it no longer work, or does it fail
just sometimes (as in the subject)? Or does it always fail, but fail
differently the first time?
The system went to a state where
Hi,
Markus Koschany a...@gambaru.de writes:
Although it's true that the top panel in Gnome 3 vanishes if you use the
default values, you can always uncheck Reset Capture Area and Outline
Capture Area on Screen under Advanced Settings - Misc. See also [3].
Maybe this should be made the default
Package: debian-installer
Severity: normal
Yesterday I tried to install Debian wheezy using my wireless network
(WPA-PSK). The installer was able to show me the list of networks so I
guess the firmware was loaded correctly from the USB stick that I
provided. I entered my password but after a long
Xiangfu Liu xian...@sharism.cc writes:
An introduction is on TODO list. :) it will be using .c files and libfpga
for implement your design.
The author(wolfgang) is working/testing on xilinx slx9 bitstream.
I am not very familiar with FPGA concepts since I have not used them yet
so my
Xiangfu Liu xian...@sharism.cc writes:
Description : A small independent command line FPGA utilities, no GUI.
plain C, no C++, text-based file formats. convert floorplan from/to
bitstream.
Sounds interesting but the description is bit generic. What does this
tool let me to do? Are there
Package: xul-ext-torbutton
Version: 1.2.5-3
Severity: normal
README.polipo points to
https://svn.torproject.org/svn/torbrowser/trunk/build-scripts/config/polipo.conf
but this is no longer available. Upstream seems to have switched to
git but then also removed it:
commit
Hi,
I first thought that chromium was using some online resource to figure
out which flash version was out of date but then I noticed that
--- chrome.pak 2012-08-29 13:22:15.0 +
+++ /usr/lib/chromium/chrome.pak 2012-08-29
13:24:45.0 +
@@ -22331,7 +22331,7 @@
Package: postfix
Version: 2.7.1-1+squeeze1
Severity: normal
Tags: ipv6
Control: notfound -1 2.9.1-2~bpo60+1
It seems that mynetworks=[fe80::]/64 does not match ipv6 link local
addresses. Upgrading to postfix 2.9.1-2~bpo60+1 from backports solved
the issue for us but I thought it might be a good
Package: guacd
Version: 0.6.0-1
Severity: normal
Steps to reproduce:
1) /etc/init.d/guacd start
Expected results:
1) guacd prints a short status message and then daemonizes itself to the
background
Actual results:
1) guacd only partially daemonizes itself. My terminal is constantly
spammed with
Hi,
I saw the same issue today with gnash and chromium. First I was really
confused and wondered if I had accidentally installed adobe
flash. Here's a screencast:
http://lindi.iki.fi/lindi/screencast/chromium-adobe1.ogv
I think it is very confusing that about:plugins shows GNU SWF Player
but
أحمد المحمودي aelmahmo...@sabily.org writes:
xpra 0.3.6+dfsg-1 has just been uploaded to Debian.
Thanks! I'll continue testing it. If it proves to be reliable it'd be
really great to provide backports for squeeze users.
-Timo
--
To UNSUBSCRIBE, email to
William Vera bi...@billy.com.mx writes:
* URL : http://reptile.rug.ac.be/~coder/sniffit/
The Domain name rug.ac.be will be discontinued as of september 1,
2009. From then on only UGent.be can be used. Please replace
rug.ac.be by UGent.be in the URL.
--
Hi,
أحمد المحمودي aelmahmo...@sabily.org writes:
On Thu, Jul 19, 2012 at 01:03:45PM +0300, Timo Juhani Lindfors wrote:
I see you uploaded 0.3.3 to unstable. I have been using it for a week
now without problems. Thanks!
---end quoted text---
Please do.
Today upstream backported
https
gregor herrmann gre...@debian.org writes:
(Just guessing, I don't plan to install Gnome to check it out :))
When I heard that ctrl-shift-R in gnome3 starts the builtin screencast
function I don't need gtk-recordmydesktop anymore so my motivation to
fix this bug is also quite low.
--
To
Package: squid3
Version: 3.1.6-1.2+squeeze2
Severity: normal
Today I visited
http://bugs.debian.oorg/systemd
by accident since the o key in my keyboard got stuck. I noticed that
the error page
| ERROR
| The requested URL could not be retrieved
|
| The following error was encountered while
Grzegorz Kolorz gkol...@gmail.com writes:
* Imported Upstream version 0.1.2
* Cleaned file licenses
Just curious:
1) What software uses this library? I don't see any reverse
dependencies.
2) Is the upstream planning to have a public version control system?
--
To UNSUBSCRIBE, email
Hermann Schwarting bugs.debian@knackich.de writes:
* In the layer pane I selected all data layers using Shift-click
* I clicked on the merge layer button
* A dialog came up to select the target layer. I selected layer 1 and
pressed Ok
* The expected result would be that all selected
package josm
tag 683186 upstream pending
thanks
Hermann Schwarting bugs.debian@knackich.de writes:
This issue is probably already fixed with revision 5303.
Does not seem to occur with 5379.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of
Package: live-build-cgi
Version: 3.0~a54-1
Severity: normal
I built a livecd using http://live-build.debian.net/cgi-bin/live-build
and stored all the output files at
http://lindi.iki.fi/lindi/xpra/live-build.debian.net/build/20120726.072537.172975686/
When I boot the iso I get a boot menu where
Package: motion
Version: 3.2.12-2
Severity: normal
When I watch the webcam at http://localhost:8081/ using chromium
20.0.1132.43~r143823-1 I see a still image that does not get updated
(the timestamp at the bottom right does not change).
tcpdump shows that data transfer does not stop.
Please
Carlos Alberto Lopez Perez clo...@igalia.com writes:
Great idea. Has been there any progress here? I think it would be very
nice to have suck package on Debian for the people that want to manually
select which services are started.
I have used the solution on my own systems but I don't have
Hi,
I see you uploaded 0.3.3 to unstable. I have been using it for a week
now without problems. Thanks!
Have you considered asking for a freeze exception? I can work with
upstream to produce a list of bugs that it fixes if that helps.
-Timo
--
To UNSUBSCRIBE, email to
at the time (it
@@ -14,6 +15,10 @@ busybox (1:1.20.0-5) UNRELEASED; urgency=low
the only remaining change to upstream 1.20.2 stable release.
* enable ping applet for udeb build, +613 bytes on i386. (Closes: #406114)
+ [ Timo Juhani Lindfors ]
+ * increase the maximum supported log line
Hi,
It looks like this is the relevant upstream bug (though it's not
totally clear if the original reporter is on armel or armhf)
I am on armel but you need to Cc me if you ask for more information.
673...@bugs.debian.org only goes to the maintainer of the package and
not the submitter.
Hi,
upstream disagrees:
[17:36:25] ahuillet lindi- : #137 isn't the same problem at all
[17:36:35] tota lindi-: not the same problem at all
[17:36:37] ahuillet #137 is about relative movement
[17:36:40] ahuillet your issue is something else
Please file a bug upstream, they can classify the bug
Package: xpra
Version: 0.3.2+dfsg-1
Severity: wishlist
I know that wheezy is now in freeze. However, have you checked the bug
fixes that are in the upstream svn stable branch 0.3.x? It seems many
of those might be something that we might want to include before
release. Many of them are trivial
package gtk-recordmydesktop
severity 674556 grave
thanks
Hi,
I too can still reproduce this bug. It makes the package completely
unusable for its intended purpose (desktop screencasting). I'm bumping
severity accordingly. If you know some workaround that makes it still
possible to use the
Package: network-manager-gnome
Version: 0.9.4.1-1+b1
Severity: normal
I recorded a screencast that shows how the bug occurs:
http://lindi.iki.fi/lindi/screencast/network-manager-gnome-fixing-APN-not-possible-after-mistake.webm
Steps to reproduce:
1) setup usb 3G modem and use it
2) go to
Hi,
using wheezy with gnome-shell 3.4.1-8 screencasting works for me. Here's
an example screencast:
http://lindi.iki.fi/lindi/screencast/network-manager-gnome-fixing-APN-not-possible-after-mistake.webm
-Timo
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a
Hi,
works for me in wheezy today.
-Timo
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Hi,
I took a brief look at the image and it seems that the user exists but
the group does not. This is quite strange since all the other standard
groups seem to be there. Maybe somebody made an error and remove the
line while modifying /etc/group directly using the joe editor?
-Timo
--
To
Hi,
Sébastien Villemot sebastien.ville...@ens.fr writes:
Emacs 24 has been uploaded to Sid. It would be great to have magit
support it.
wheezy is now frozen so I think it's bit too late to add new
features. Is emacs24 trying to get to wheezy?
-Timo
--
To UNSUBSCRIBE, email to
Hi,
Sébastien Villemot sebastien.ville...@ens.fr writes:
It is trying: the current version of emacs24 has a freeze exception
since it got uploaded a few hours before the freeze. But it FTBFS on at
least two arches. I guess the final decision will be in the hands of the
Release Team.
Uhm, I
Package: packages.debian.org
Severity: normal
Both testing and unstable have libssl-dev with openssl/ssl.h but only
the testing search finds it:
http://packages.debian.org/search?searchon=contentskeywords=openssl%2Fssl.hmode=pathsuite=unstablearch=any
= Sorry, your search gave no results
Package: wpasupplicant
Version: 0.7.3-6
Severity: normal
Steps to reproduce:
1) On an openmoko freerunner phone I run
sudo killall dhclient
sudo killall wpa_supplicant
om wifi power 0
sleep 4
om wifi power 1
sleep 4
om wifi maxperf wlan 1
sleep 4
sudo /sbin/wpa_supplicant -B -f
package wpasupplicant
forwarded 679085 http://w1.fi/bugz/show_bug.cgi?id=456
found 679085 1.0-2
notfound 679085 0.7.3-6
thanks
I forwarded the bug upstream to http://w1.fi/bugz/show_bug.cgi?id=456
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of
Michael Stapelberg michael+db20090...@stapelberg.de writes:
Dunst is a minimalistic notification daemon for Linux. It's designed to
fit nicely into minimalistic windowmanagers like dwm, but it should
work on any Linux desktop.
I think you should elaborate on what minimal means. Does it try
Package: qtmobility-dev
Version: 1.2.0-3
Severity: important
Steps to reproduce:
1) cat testcase.cc EOF
#include QtMultimediaKit/QAudio
EOF
2) g++ -c testcase.cc
Expected results:
2) testcase builds
Actual results:
2) build fails with
In file included from
Hi,
I hit this bug while trying to remove python2.5-minimal:
Removing python-wxgtk2.6 ...
Removing python2.5-dev ...
Removing python2.5 ...
Purging configuration files for python2.5 ...
Removing python2.5-minimal ...
Unlinking and removing bytecode for runtime python2.5
python-4suite-xml:
Hi,
after changing
add_problematic package $package left obsolete init.d script behind
in /var/lib/dpkg/info/sysv-rc.postinst to
add_problematic package $package left obsolete init.d script $initscript
behind
I get
...
info: Checking if it is safe to convert to dependency based boot.
Package: llvm-gcc-4.6
Version: 3.0-3.2
Severity: important
$ echo void foo(void) {} testcase.c
$ llvm-gcc -c testcase.c
Potential incompatible plugin version. GCC: 4.6 (20120430). Expected: 4.6
(20120528)
Defines 'dragonegg_disable_version_check' as env variable to remove this warning
Please
Hi,
Ritesh Raj Sarraf r...@researchut.com writes:
Can the reporter test if the addition of the runuser command solves
problems? In case it does, we will need to work on its inclusion into
coreutils now, for smooth landing in the next release.
Adding runuser to Debian is probably a good idea
Hi,
it seems that due to lack of time we are going to release wheezy without
working systemtap-server. I think this is ok since systemtap-server is
entirely optional part of systemtap.
Ritesh, should we document this somehow in the package itself or is the
bug report enough?
-Timo
--
To
Hi,
shawn shawnland...@gmail.com writes:
Here is a working patch against current sid version. (for at least
armel)
It won't cleanly git am against git, but if you read it, it is trivial
to resolve (but tedious)
however, I do not know how to check against git anyways, as that debian
Hi,
src/ui/base/resource/data_pack.cc
bool DataPack::Load(const FilePath path) {
mmap_.reset(new file_util::MemoryMappedFile);
if (!mmap_-Initialize(path)) {
DLOG(ERROR) Failed to mmap datapack;
UMA_HISTOGRAM_ENUMERATION(DataPack.Load, INIT_FAILED,
Hi,
for me it still fails to build even with your patch:
http://lindi.iki.fi/lindi/chromium/chromium-browser_18.0.1025.168~r134367-1lindi1_armel.build
http://lindi.iki.fi/lindi/chromium/chromium-browser_18.0.1025.168~r134367-1lindi1.debian.tar.gz
...
if test -e /usr/share/misc/config.sub ;
Hi,
this certainly affects me too. ftp.fi.debian.org and ftp.se.debian.org,
using armel unstable chroot with apt-get update and
Acquire::PDiffs false;
set.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Hi,
using two different packages that try to manage the firewall rules at
the same time is inherently difficult. I'm not sure if there can be a
good solution to this bug at all.
Should ufw purge try invoke-rc.d fail2ban restart? That sounds like a
hack too.
Or should it just conflict with
Package: gtk-recordmydesktop
Version: 0.3.8-4.1
Severity: important
Steps to reproduce:
1) install debian wheezy with gnome3 as desktop environment (the
default)
2) Activities-Applications type record to search box and click
RecordMyDesktop.
3) click Record.
Expected results:
3) User can
Pino Toscano p...@debian.org writes:
2) browse different web sites for a while
Hm, a bit generic :/
What could help to narrow the problem a bit more is:
- does the problem happen when navigating to a specific site, or a
precise sequence of sites visited?
It seemed to crash in a few
Braun Gábor braun.ga...@renyi.mta.hu writes:
I wonder why there is still a 50magit.el in master
autoloading only magit-status.
That comes from the upstream tarball. It doesn't matter since
./debian/emacsen.startup is what is actually copied to /etc:
Bill Allombert bill.allomb...@math.u-bordeaux1.fr writes:
Do you have libpam-systemd installed on your system ?
At least I do.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
upstream homepage URL.
* Remove DM-Upload-Allowed.
-- Timo Juhani Lindfors timo.lindf...@iki.fi Mon, 21 May 2012 14:35:24 +
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: mosh
Version: 1.2-1
Severity: important
Tags: security
I submitted details upstream at
https://github.com/keithw/mosh/issues/271
but here's also a copy:
The commands
echo -en \e[2147483647L
echo -en \e[2147483647M
echo -en \e[2147483647@
echo -en \e[2147483647P
all cause
Package: libwebkitgtk-1.0-0
Version: 1.8.1-2
Severity: grave
Justification: renders package unusable
Steps to reproduce:
1) /usr/lib/webkitgtk-1.0-0/libexec/GtkLauncher
2) enter www.google.com as the address
3) search for debian bts
Expected results:
3) search results are shown
Actual results:
Hi,
also epiphany-browser is now unusable:
Program received signal SIGSEGV, Segmentation fault.
0x42292320 in JSC::JSValue::get(JSC::ExecState*, JSC::Identifier const,
JSC::PropertySlot) const () from /usr/lib/libjavascriptcoregtk-3.0.so.0
(gdb) bt
#0 0x42292320 in
Rémi Vanicat remi.vani...@gmail.com writes:
There is the org-install.el file of org-mode (I don't know if it is used
by the Debian package, but I know that this file play a similar role
than 50magit.el, and is generated in similar way).
The org-mode debian package has
;; -*-emacs-lisp-*-
;;
Pierre Jaury pie...@jaury.eu writes:
Volonturay distributed file sharing
This is an opensource, free and viral project
that aims at providing collaborative distributed
storage to users who want to store and share files
temporarily over the Internet.
Has somebody evaluated the security of
Hi,
Pierre Jaury pie...@jaury.eu writes:
This software is still an early research project: as far as I know, only
basic formal security analysis has been performed.
Ok, just make sure that the users know about this.
Yet, for your specific concern about usual AES vulnerability when using
Hi,
I see a similar problem on my desktop system running squeeze.
If I select Analog Output I can hear voice from both my speakers and
headset.
If I select Analog Headphones I can not hear anything at all.
If I use alsamixer and manually enable Front control then I can hear
sounds from
Package: mosh
Version: 1.2-1
Severity: wishlist
If I try to build mosh with
DEB_BUILD_OPTIONS='nostrip debug noopt' fakeroot apt-get --build source mosh
it still uses -O2 with gcc:
...
make[3]: Entering directory `/home/lindi/tmp/mosh-1.2/src'
Making all in protobufs
make[4]: Entering
Hi,
this looks like an inherent limitation of the bittorrent package: It
wants to keep all files of the torrent open.
At least here the ulimit -a command shows that there is a limit on the
number of open files, 1024 in my system, that prevents bittorrent from
keeping all files open.
-Timo
Package: gnuradio-dev
Version: 3.6.0-1
Severity: normal
When I try to build
https://www.cgran.org/wiki/SpecEst
against gnuradio-dev from debian unstable I get an error about missing
gruel_common.i. This file is part of gnuradio-dev in wheezy but not
in unstable. I see it is still in upstream
Package: gnuradio
Version: 3.6.0-1
Severity: important
$ gnuradio-companion
Traceback (most recent call last):
File /usr/bin/gnuradio-companion, line 79, in module
from gnuradio.grc.python.Platform import Platform
File /usr/lib/python2.7/dist-packages/gnuradio/grc/python/Platform.py, line
Hi,
also trying to build
http://vk2tvk.org/Wireless/Franks/GnuradioFourLevelFSK.html
fails with
...
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/lindi/tmp/gr-fsk4/config'
Making all in src
make[2]: Entering directory `/home/lindi/tmp/gr-fsk4/src'
Making all in lib
Hi,
A. Maitland Bottoms bott...@debian.org writes:
My goal is to alow gnuradio to install into a chroot
environment, and not depend upon desktop integration -
but if there is a desktop then it should do the right
thing.
I'm also running gnuradio-companion from unstable chroot on my squeeze
Package: icedtea-plugin
Version: 1.2-2
Severity: normal
Steps to reproduce:
1) iceweasel -no-remote
http://www.colorado.edu/physics/2000/applets/satellites.html
Expected results:
1) applet runs
Actual results:
1) user sees a light yellow rectangle with no
content. iceweasel/icedtea prints a
Hi,
[ Sending a copy to upstream mailing list for further comments ]
I'm bit puzzled here. Isn't this by design?
It's not auto-loaded so users will have to (require
'magit-simple-keys) in their .emacs explicitly to use it anyway.
--
(84.248.66.131) by jenni2.inet.fi (8.5.140.02)
id 4FA804FA0005F914; Tue, 8 May 2012 11:08:54 +0300
Received: from lindi by sauna with local (Exim 4.72)
(envelope-from timo.lindf...@iki.fi)
id 1SRfTa-0004x3-0c; Tue, 08 May 2012 11:08:54 +0300
From: Timo Juhani Lindfors timo.lindf
Yann Hodique yann.hodi...@gmail.com writes:
The proper fix is to generate this file (which is fixed in the 'master'
git branch but didn't hit any release yet).
Hmm. make in git master generates a really long 50magit.el. My problem
is that this file does not comply with the debian emacs policy.
Yann Hodique yann.hodi...@gmail.com writes:
Sorry, I'm not familiar with the Debian policy. Is there something that
needs to be fixed on our side ?
Good question. In general the autoload file is written in a distribution
specific way and not inherited from upstream.
--
To UNSUBSCRIBE, email
Yann Hodique yann.hodi...@gmail.com writes:
Ok, so I guess worst case you can generate a Debian-specific one that
may or may not load this one.
Actually I'm not even sure exactly why we generate this one in the
first place. Do some of our users explicitly load it ?
No idea. I went through
Package: gnuradio
Version: 3.5.3.2-1
Severity: important
Steps to reproduce:
1) apt-get install gnuradio
Expected results:
1) gnuradio is installed
Actual results:
1) installation fails with
Setting up python-cheetah (2.4.4-2+b1) ...
Setting up gnuradio (3.5.3.2-1) ...
Begin freedesktop
Package: popularity-contest
Version: 1.53
Severity: normal
When I installed popularity-contest I started getting daily emails
from the cronjob with just
/etc/cron.daily/popularity-contest:
...terminated.
as a body. I tried to debug this and noticed that it does not occur if
I use sysvinit,
Package: john
Version: 1.7.3.1-1
Severity: normal
man john says While cracking, you can press any key for status but
for some reason this does not seem to work if I start john from a
shell script:
Steps to reproduce:
1) echo abc:0bee89b07a248e27c83fc3d5951213c1 testcase
2) /usr/sbin/john
Vladimir Stavrinov vstavri...@gmail.com writes:
http://mentors.debian.net/debian/pool/main/r/rpg/rpg_1.0.4-1.dsc
Now there is at least the problem that you are using the $RANDOM
variable of bash. It is easily predictable and should not be used to
produce passwords.
--
To UNSUBSCRIBE, email
Vladimir Stavrinov vstavri...@gmail.com writes:
In some degree it is compensated by the fact, that double letters are
excluded as well as other combinations. This forces to to call $RANDOM
again and again before pick up a symbol.
Calling $RANDOM again and again does not help at all. If you
Vladimir Stavrinov vstavri...@gmail.com writes:
Ok. Show me where You see password. What command in process list does show
password?
It's the tr commands this time.
$ stap -e 'probe syscall.execve { printf(%s\n, argstr); }' -c './rpg'
parketdufime
./rpg
/usr/bin/cut -c 7
/usr/bin/tr
Package: snapshot.debian.org
Severity: normal
Today
http://snapshot.debian.org/archive/debian/20120411T040119Z/pool/main/s/systemd/
lists systemd_44-1_amd64.deb but this is not discoverable using the
machine readable JSON interface:
$ date -u
Wed Apr 11 09:13:30 UTC 2012
lindi1:~$ wget
package icedtea-plugin
reopen 655936
thanks
Hmm. It still fails here:
$ dpkg -l|grep icedtea
ii icedtea-6-jre-cacao:i386 6b24-1.11.1-3
Alternative JVM for OpenJDK, using Cacao
ii icedtea-6-jre-jamvm:i386 6b24-1.11.1-3
package icedtea-plugin
close 655936
thanks
Sorry, I'll open a separate bug report for this new issue.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: icedtea-7-plugin
Version: 1.2-2
Severity: normal
If I follow the steps in
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=655936
using 1.2-2 I get a new backtrace:
$ iceweasel -ProfileManager -no-remote http://www.ida.liu.se/~her/npp/demo.html
Gtk-Message: Failed to load module
Vladimir Stavrinov vstavri...@gmail.com writes:
Fixed. Please, check it again:
I'm too busy at least at the moment.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Vladimir Stavrinov vstavri...@gmail.com writes:
Don't worry, we have nowhere to rush. I can't check it myself, so I'll
wait for You. Thank You for Your assistance.
If you are going to maintain this package you really need to learn how
to audit it for security issues :)
--
To UNSUBSCRIBE,
Vladimir Stavrinov vstavri...@gmail.com writes:
Certainly! But to resolve last issue, I should compile custom kernel,
while at this time I am using Debian binary kernel.
Why? systemtap works with debian stable kernels.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
Vladimir Stavrinov vstavri...@gmail.com writes:
I am on 3.2.0-2
I'm on linux-image-3.2.0-1-amd64 3.2.4-1 and it works.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Vladimir Stavrinov vstavri...@gmail.com writes:
Fixed:
Unfortunately not. I can still see the password. Writing security
sensitive software a shell script is quite challenging. I would really
urge you to improve some existing program instead.
--
To UNSUBSCRIBE, email to
Vladimir Stavrinov vstavri...@gmail.com writes:
May be You are using old version? Please, show me output from:
rpg -V
$ ./rpg -V
rpg 1.0.2
(C) Vladimir Stavrinov vstavri...@gmail.com, GPL
Just think about all the commands you execute. It shouldn't be too
difficult. I can
Vladimir Stavrinov vstavri...@gmail.com writes:
I've ran rpg in continues loop, but no password was caught, because it
fed to grep via stdin directly from shell. To be sure, please, test it
again.
I can still see the password.
When the generator prints Vipeza as a password it does
/bin/grep
Vladimir Stavrinov vstavri...@gmail.com writes:
To advantage of this utility points it's name: READABLE password
generator. If You can read (i.e. to pronounce), then it is easy for
remembering. But readable doesn't means weak - it is strong enough
as long as dictionary is available for
Hi,
I can reproduce this under wheezy when I install systemd from unstable.
-Timo
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Vladimir Stavrinov vstavri...@gmail.com writes:
First of all in most cases it is using on workstation where are no other
live users then You (or hacker breached into Your system) . Second, it
is used sporadically and rarely. To catch those passwords You need
continuously watching and analyze
Package: sikuli-ide
Version: 1.0~x~rc3.tesseract3-dfsg1-1
Severity: important
Steps to reproduce:
1) use gnome
2) start sikuli-ide from gnome-terminal
3) click the click() button
4) select any rectangular area on the screen
Expected results:
4) sikuli does not crash
Actual results:
4) sikuli
package wnpp
noowner 435058
retitle 435058 RFP: smolt -- Fedora hardware profiler
thanks
I didn't find the time to start packaging this after all. It's a shame
but I'll rather maintain a small number of packages well than try to
package things in a hurry.
Anyways, if somebody else has the time
package magit
tags 666887 pending
thanks
Keshav Kini keshav.k...@gmail.com writes:
The homepage of magit as shown in, for example, aptitude is
http://philjackson.github.com/magit/index.html;. The current correct URL is
http://magit.github.com/magit/index.html;.
Thanks, fixed in git now and
Package: gnuradio
Version: 3.5.2.1-1
Severity: important
Thanks a lot for packaging gnuradio. When I noticed that it entered
Debian again I went ahead and tested it in a few chroots:
lindi1:~$ gnuradio-companion
** (process:7832): WARNING **: Trying to register gtype 'GMountMountFlags' as
Alexander Gerasiov g...@debian.org writes:
It tries fqdn for ipv6 address,
I can confirm this. getent hosts cellarbackup returns
10.7.2.10 cellarbackup.lan but also does
12:46:27.301176 IP lindi1.lan.47076 G.ROOT-SERVERS.NET.domain: 63381 [1au]
? cellarbackup. (41)
Downgrading to
Hi,
I seem to have hit the same bug again with 2.6.32-38 domU (amd64). After
I rebooted dom0 to 2.6.32-41 I see that the jiffies value of the domU
does not increase but cpu_time in xm list -l output does. Value of
last_value seems to increase (now around 1804512135271).
I looked at
Hi Axel,
if you send email to 659...@bugs.debian.org the email will only go the
maintainer of the package. You need send email also to
659941-submit...@bugs.debian.org to make sure that I (the submitter) can
see your questions :-)
My logs have already rotated multiple times since Feb 15 :-(
I
Pali Rohár pali.ro...@gmail.com writes:
What is state of this bug? If nobody has time for it, how can I
maintain it?
http://mentor.debian.net/ might help you. However, I have to say that
the ideal case would still be that you find somebody who cares about
stormlib and already knows Debian well.
201 - 300 of 1347 matches
Mail list logo