Bug#206364: Erwerben Sie soviel wie, Sie konnen! Schutzcode:JY-0742

[Yan Hoffmann]

Lieber Freund,
Wenn Sie mehr Geld, mehr Sicherheit und mehr Freiheit haben mochten, dann
kann das der wichtigste Brief fur Sie sein, den Sie in Ihrem Leben gelesen
haben.
Hier sind die Grunde dazu:
Sie werden erfahren, wie ich habe... wie Sie werden... das in Wirklichkeit
bringen, "mit Ihrem PC zu arbeiten und die Bezahlung fur einen vollen
Arbeitstag erhalten".
Was noch wichtiger ist, dass Sie einfach damit anfangen konnen, ohne jedes
Risiko und Investionen von Ihrer Seite im Voraus.
Jetzt, weiss ich, dass Sie skeptisch gesinnt sind. Das ist in Ordnung und
ganz typisch. Lassen Sie mich Ihnen drei Grunde vorlegen, warum Sie diesen
Business ohne zu zogern beginnen sollen.

Drei Grunde, daran zu glauben, was ich sage

Erstens, Ich bin NICHT im Begriff Ihnen zu versprechen, dass Sie  dreissig
tausend USD  in den nachsten 90 Tagen oder $500 pro Tag ab nachster Woche
verdienen werden. Das ist absolut ubertrieben.   Was wichtig fur Sie zu
begreifen ist, dass es unter viel Mull nur wenig Edelsteine gibt. 
Zweitens, Zehntausende von  gewohnlichen Menschen aus aller Welt ziehen
schon Vorteile aus dem Programm "der Arbeit zu Hause" und bekommen ihre
wochentlichen Lohne (Schecke) - insgesamt fast 6 Millionen Dollar im vorigen
Jahr.
Drittens, USA TODAY teilte vor Kurzem mit, mehr als 170 000 neue Leute
bekamen Internetanschluss pro Tag. Viele kluge Geschaftsleute werden reich
mit Hilfe vom Internet. Und das ist erst der Anfang! Mit unserem System
konnen Sie Ihr Geld ohne besondere Bemuhungen bekommen!

Das ist die Liste der Vorteile, die Sie ziehen konnen

Das vollendete, einfache im Gebrauch System, das Sie einfach "einschalten",
um Extrabucks zu bekommen.
Der Hausbusiness wurde von beschaftigten Leuten geschaffen - nur 3-5
Stunden pro Woche und Sie werden Ihre Bezahlung fur den vollen Arbeitstag in
Ihrer Tasche bestimmt haben.
Diese Arbeit stort Ihre laufende Arbeit, Ihren Beruf oder Ihre Karriere
nicht - Sie wahlen die Zeit fur die Arbeit im Internet.
Sie schafft "mache das einmal, wirst mit Geld fur dein ganzes Leben
versorgt sein" und Honorar bekommen Sie ohne das Haus zu verlassen.
Keine Erfahrung brauchen Sie dafur.
Geniessen Sie innige Ruhe, die Sie wahrend der Arbeit mit einer der
erfolgreichsten und bewahrten Industrieorganisationen und mit dem
langfristigen Mitglied von Better Business Bureau.
Sie werden Ihren Business auf einer soliden Basis entwickeln - 14 Jahre der
zuverlassigen und erfahrenen Strategien.
Buchfuhrung, Entlohnungstabelle, Frachtbefordung  alles ist fur Sie bei uns
vorhanden.
Keine Dienstnehmer sind notig.
Arbeiten Sie nur zu Hause, nur an Ihrem PC.
Unentgeltliche professionelle Beratungen.
Keine Begrenzungen fur mogliche Verdienste!
Keine teure Einrichtung eines Buros wird verlangt!
Riesige potentielle Steuerprofite.
Keine territorielle Begrenzungen!  
Das System ist auch perfekt fur Verschaffung der Extragelder fur schon
bestehendes Geschaft.
Das ist eine kurze Liste aller Vorteile, die Sie ziehen konnen. Es kostet
Ihnen nichts darauf einzugehen und es gibt keine Verpflichtungen. Jetzt sind
Sie vielleicht verwundert...

Und wie konnen wir alle diese Dinge tun? Lassen Sie mich erklaren. Dazu
dienen aber nicht meine Worte, sondern die Worte von anderen Leute:
"Wie viele von uns, habe ich vieles probiert. Ich habe  endlich das
gefunden, was sich organisatorisch und materiell jeden Tag bewahrt. Ich
konnte kaum glauben, dass das, was ich in den ersten Wochen meiner Arbeit in
meinem Postkasten fand, war nur Abschlagszahlung".
B. Trask
Arizona, die USA

"Die Unterstutzung, die ich erhalten habe, war ausserordentlich gross. Ich
kann nicht glauben, dass so viel Energie aufgewendet wird, damit ich Erfolg
erziele".

A. Marks
Michigan, die USA

"Das ist das schnellste und effizienteste Marketingsystem, das ich gesehen
habe. Was fur eine Moglichkeit!" S. Allen Utah, die USA 

"Nachdem ich viel Zeit, Energie und Ressourcen in Marketing fur einige
fruhere Programme ausgelegt hatte, war ich fur einen so einfachen und
absolut automatischen Prozess, der von De-payments Powerline Systeme
angeboten wurde, nicht vorbereitet. Ich war ebenso durch den allumfassenden
angebotenen Training sehr beeindruckt. Das ist der ins Leben umgesetzte
Traum. Danke Ihnen, De-payments".
D.Kukkee
Kanada

"Ich habe Internet 6 jahre benutzt und De-payments ist die beste und
vollendete Moglichkeit unter denen, die ich gesehen habe... alles ist so
einfach und klar, es gibt keine Unklarheiten uberhaupt".
Delroy
Jamaika

 

"Ich habe in De-payments einen hochwertigen und schnellen Business
gefunden. Das bedeutet schon etwas fur mich – ich will mein eigenes Haus und
einen guten Verdienst haben. De-payments gibt mir solche Moglichkeit!"
K.Pfaff
Connecticut, die USA

"De-payments ist eine grosse Moglichkeit, finanzielle Unabhangigkeit mit
der guten Arbeitsethik zu erreichen. Verlassliche und professionelle Leute,
tolle Produktion".
A. Cooper
Arizona, die USA


Was ist eingeschlossen?
Wenn Sie unser Team anschliessen, bekommen Sie das vo

Bug#316477: apache2-mpm-worker fails to execute any CGIs!

[andy]

Package: apache2-mpm-worker
Version: 2.0.54-4
Severity: grave
Justification: renders package unusable


With mpm-worker and cgid, CGIs can't execute, because somewhere compiled
into the code is that path /var/run/cgisock which is quite different
from the /var/run/apache2/cgisock that comes specified in the cgid.conf
file!  Without doing an strace, I would never have been able to figure
it out.  Strace output, abreviated ~:^)

.
.
.
5794  <... poll resumed> [{fd=8, events=POLLIN, revents=POLLIN}], 1, 15000) = 1
5794  read(8, "GET /cgi-bin/env.pl HTTP/1.1\r\nHo"..., 8000) = 373
5794  gettimeofday({1120197035, 62657}, NULL) = 0
5794  stat64("/usr/lib/cgi-bin/env.pl", {st_mode=S_IFREG|0755, st_size=116, 
...}) = 0
5794  lstat64("/usr/lib/cgi-bin/env.pl", {st_mode=S_IFREG|0755, st_size=116, 
...}) = 0
5794  getpid()  = 5783
5794  socket(PF_FILE, SOCK_STREAM, 0)   = 9
5794  connect(9, {sa_family=AF_FILE, path="/var/run/cgisock"}, 110) = -1 ENOENT 
(No such file or directory)
5794  close(9)  = 0
5794  gettimeofday({1120197035, 63709}, NULL) = 0
5794  write(6, "[Thu Jun 30 22:50:35 2005] [erro"..., 162) = 162
5794  stat64("/var/log/apache2/cgi.log", 0xb66b86ec) = -1 ENOENT (No such file 
or directory)
5794  open("/var/log/apache2/cgi.log", O_WRONLY|O_APPEND|O_CREAT, 0666) = -1 
EACCES (Permission denied)
5794  writev(8, [{"HTTP/1.1 503 Service Temporarily"..., 272}, {"

Bug#192729: -b should work, but...

[Eduard Bloch]

Package: vim-gtk
Version: 1:6.3-078+1
Followup-For: Bug #192729

Hello,

I discovered the -b switch which allows to edit the text "as-is". This
is a workaround but not a good one (because sometimes you want to edit
gzip files or so but with charset detection).

This all _may_ work with an appropriate augroup...

Regards,
Eduard.

-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (990, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 
'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.12
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)

Versions of packages vim-gtk depends on:
ii  libatk1.0-0  1.10.1-2The ATK accessibility toolkit
ii  libc62.3.2.ds1-22GNU C Library: Shared libraries an
ii  libglib2.0-0 2.6.5-1 The GLib library of C routines
ii  libgpmg1 1.19.6-20   General Purpose Mouse - shared lib
ii  libgtk2.0-0  2.6.8-1 The GTK+ graphical user interface 
ii  libice6  4.3.0.dfsg.1-14 Inter-Client Exchange library
ii  libncurses5  5.4-8   Shared libraries for terminal hand
ii  libpango1.0-01.8.1-1 Layout and rendering of internatio
hi  libsm6   4.3.0.dfsg.1-14 X Window System Session Management
ii  libx11-6 4.3.0.dfsg.1-14 X Window System protocol client li
hi  libxt6   4.3.0.dfsg.1-14 X Toolkit Intrinsics
ii  vim  1:6.3-078+1 Vi IMproved - enhanced vi editor
ii  xlibs4.3.0.dfsg.1-14 X Keyboard Extension (XKB) configu

vim-gtk recommends no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#229757: Zugelassene Weise, Ihr Einkommen zu erhohen.Schutzcode:TR-1572

[Yan Hofman]

Lieber Freund,
Wenn Sie mehr Geld, mehr Sicherheit und mehr Freiheit haben mochten, dann
kann das der wichtigste Brief fur Sie sein, den Sie in Ihrem Leben gelesen
haben.
Hier sind die Grunde dazu:
Sie werden erfahren, wie ich habe... wie Sie werden... das in Wirklichkeit
bringen, "mit Ihrem PC zu arbeiten und die Bezahlung fur einen vollen
Arbeitstag erhalten".
Was noch wichtiger ist, dass Sie einfach damit anfangen konnen, ohne jedes
Risiko und Investionen von Ihrer Seite im Voraus.
Jetzt, weiss ich, dass Sie skeptisch gesinnt sind. Das ist in Ordnung und
ganz typisch. Lassen Sie mich Ihnen drei Grunde vorlegen, warum Sie diesen
Business ohne zu zogern beginnen sollen.

Drei Grunde, daran zu glauben, was ich sage

Erstens, Ich bin NICHT im Begriff Ihnen zu versprechen, dass Sie  dreissig
tausend USD  in den nachsten 90 Tagen oder $500 pro Tag ab nachster Woche
verdienen werden. Das ist absolut ubertrieben.   Was wichtig fur Sie zu
begreifen ist, dass es unter viel Mull nur wenig Edelsteine gibt. 
Zweitens, Zehntausende von  gewohnlichen Menschen aus aller Welt ziehen
schon Vorteile aus dem Programm "der Arbeit zu Hause" und bekommen ihre
wochentlichen Lohne (Schecke) - insgesamt fast 6 Millionen Dollar im vorigen
Jahr.
Drittens, USA TODAY teilte vor Kurzem mit, mehr als 170 000 neue Leute
bekamen Internetanschluss pro Tag. Viele kluge Geschaftsleute werden reich
mit Hilfe vom Internet. Und das ist erst der Anfang! Mit unserem System
konnen Sie Ihr Geld ohne besondere Bemuhungen bekommen!

Das ist die Liste der Vorteile, die Sie ziehen konnen

Das vollendete, einfache im Gebrauch System, das Sie einfach "einschalten",
um Extrabucks zu bekommen.
Der Hausbusiness wurde von beschaftigten Leuten geschaffen - nur 3-5
Stunden pro Woche und Sie werden Ihre Bezahlung fur den vollen Arbeitstag in
Ihrer Tasche bestimmt haben.
Diese Arbeit stort Ihre laufende Arbeit, Ihren Beruf oder Ihre Karriere
nicht - Sie wahlen die Zeit fur die Arbeit im Internet.
Sie schafft "mache das einmal, wirst mit Geld fur dein ganzes Leben
versorgt sein" und Honorar bekommen Sie ohne das Haus zu verlassen.
Keine Erfahrung brauchen Sie dafur.
Geniessen Sie innige Ruhe, die Sie wahrend der Arbeit mit einer der
erfolgreichsten und bewahrten Industrieorganisationen und mit dem
langfristigen Mitglied von Better Business Bureau.
Sie werden Ihren Business auf einer soliden Basis entwickeln - 14 Jahre der
zuverlassigen und erfahrenen Strategien.
Buchfuhrung, Entlohnungstabelle, Frachtbefordung  alles ist fur Sie bei uns
vorhanden.
Keine Dienstnehmer sind notig.
Arbeiten Sie nur zu Hause, nur an Ihrem PC.
Unentgeltliche professionelle Beratungen.
Keine Begrenzungen fur mogliche Verdienste!
Keine teure Einrichtung eines Buros wird verlangt!
Riesige potentielle Steuerprofite.
Keine territorielle Begrenzungen!  
Das System ist auch perfekt fur Verschaffung der Extragelder fur schon
bestehendes Geschaft.
Das ist eine kurze Liste aller Vorteile, die Sie ziehen konnen. Es kostet
Ihnen nichts darauf einzugehen und es gibt keine Verpflichtungen. Jetzt sind
Sie vielleicht verwundert...

Und wie konnen wir alle diese Dinge tun? Lassen Sie mich erklaren. Dazu
dienen aber nicht meine Worte, sondern die Worte von anderen Leute:
"Wie viele von uns, habe ich vieles probiert. Ich habe  endlich das
gefunden, was sich organisatorisch und materiell jeden Tag bewahrt. Ich
konnte kaum glauben, dass das, was ich in den ersten Wochen meiner Arbeit in
meinem Postkasten fand, war nur Abschlagszahlung".
B. Trask
Arizona, die USA

"Die Unterstutzung, die ich erhalten habe, war ausserordentlich gross. Ich
kann nicht glauben, dass so viel Energie aufgewendet wird, damit ich Erfolg
erziele".

A. Marks
Michigan, die USA

"Das ist das schnellste und effizienteste Marketingsystem, das ich gesehen
habe. Was fur eine Moglichkeit!" S. Allen Utah, die USA 

"Nachdem ich viel Zeit, Energie und Ressourcen in Marketing fur einige
fruhere Programme ausgelegt hatte, war ich fur einen so einfachen und
absolut automatischen Prozess, der von De-payments Powerline Systeme
angeboten wurde, nicht vorbereitet. Ich war ebenso durch den allumfassenden
angebotenen Training sehr beeindruckt. Das ist der ins Leben umgesetzte
Traum. Danke Ihnen, De-payments".
D.Kukkee
Kanada

"Ich habe Internet 6 jahre benutzt und De-payments ist die beste und
vollendete Moglichkeit unter denen, die ich gesehen habe... alles ist so
einfach und klar, es gibt keine Unklarheiten uberhaupt".
Delroy
Jamaika

 

"Ich habe in De-payments einen hochwertigen und schnellen Business
gefunden. Das bedeutet schon etwas fur mich – ich will mein eigenes Haus und
einen guten Verdienst haben. De-payments gibt mir solche Moglichkeit!"
K.Pfaff
Connecticut, die USA

"De-payments ist eine grosse Moglichkeit, finanzielle Unabhangigkeit mit
der guten Arbeitsethik zu erreichen. Verlassliche und professionelle Leute,
tolle Produktion".
A. Cooper
Arizona, die USA


Was ist eingeschlossen?
Wenn Sie unser Team anschliessen, bekommen Sie das vo

Bug#316476: kernel-source-2.6.11: Fails to boot since 2.6.11-4

[Steve Langasek]

reassign 316476 kernel-image-2.6.11-amd64-generic
merge 316476 316453
thanks

On Fri, Jul 01, 2005 at 02:10:04AM -0400, Pascal Giard wrote:
> Package: kernel-source-2.6.11
> Version: 2.6.11-4
> Severity: critical
> Justification: breaks the whole system

> (Sorry if this is a dupe, i had filled it against
> kernel-image-2.6.11-amd64-generic).

Well, given that you filed three bugs all about the same issue, yes, two of
them would seem to be duplicates.

-- 
Steve Langasek
postmodern programmer


signature.asc
Description: Digital signature

Bug#316410: Can we have the french translation

[Eduard Bloch]

#include 
* Guilhelm Panaget [Thu, Jun 30 2005, 11:00:25PM]:

> Hello,
> 
> Some months ago, I've sent to the cdcat developper the cdcat_fr.ts file 
> containing the complete translation of the cdcat screens.
> 
> Would it be possible to have the package updated ?

Sure, but I cannot remember getting a copy.

Regards,
Eduard.
-- 
 cat /dev/urandom > /dev/dsp
 zobel: das nennt sich "metal"
 oder "techno", je nachdem


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316107: samba: Sporadic missing files in directory listings over smbfs

[Steve Langasek]

reassign 316107 kernel
thanks

On Wed, Jun 29, 2005 at 09:07:38AM +1000, Andrew Bartlett wrote:
> On Tue, 2005-06-28 at 18:58 +0200, John Hendrikx wrote:
> > Package: samba
> > Version: 3.0.14a-3
> > Severity: important

> > I have a smbfs drive mounted like this:

> > mount -t smbfs -o username=Administrator,password=XXX //10.0.3.1/c$
> > //net/c

> The issue here is in the kernel, not in the userspace mount utilities. 

Yep -- reassigning accordingly.

-- 
Steve Langasek
postmodern programmer


signature.asc
Description: Digital signature

Bug#315592: RFH aboot (Alpha bootloader): Looking for co-maintainers

[Peter 'p2' De Schrijver]

Hi Helge,

> 
> Great. Since I am not a DD, I will inform Steve Langasek, who did the
> uploads and helped me a great deal with all the packaging details.
> 
> The first thing you can do is to check out our CVS from alioth
> (pkg-aboot). I'll ask Steve to add you to the group and get a little
> aqauinted with the source layout. Please ask if something is unclear,
> ... I cannot tell you the nitty gritty source details, but the overall
> layout and the purpose of the various tools/directories etc. I know. 
> 
> Out of the bugs, I'd consider #270801 the most anyoing. Unfortunately,
> netabootwrap is not in the upstream source, hence we are "on our own".

Ok. Do I get it right that aboot doesn't display any messages at all ?
(not even 'aboot: Linux/Alpha SRM bootloader version ') ?

> For #153176 and #222904 I tried to collect as much info as possible,
> and also talked to upstream, but there is no solution yet. Please see
> the logs. 
> 

Ok. I will look into this.

> If you know how to add other FS, then #153666 might be fun for you.
> Upstream is a little reluctant, though, to add more and more file
> systems. Since a patch is available, the next thing would be to test,
> if possible, and add it in the next upload which could deal with the
> new policy version as well (haven't looked yet, what this would
> require).
> 

I have done (am doing this) for other bootloaders. Should be doable for
aboot as well.

> Suggestions for #271180 are welocme as well.
> 

I think it might be good to interpret booted_osflags the same way for
netboot then for disk/cd boot. Ie as the aboot.conf entry to use for
booting. This would require a small aboot.conf to be included in the
netboot image.

> A very important thing is, though, to keep aboot buildable (by
> having machines to build and test on). 
> 

Yep. Although SRM seems to be a reasonably well behaved firmware in my
experience.

> And finally, I have the upstream e-mail adresses and can try to get
> them working on it again. And documentation fixes I can submit both
> for Debian as upstream (sourceforge) as well.
> 

Ok.

Cheers,

Peter (p2).


signature.asc
Description: Digital signature

Bug#161603: Ermudet vom niedrigen Gehalt?Sicherheit Zeichen:EG-0428

[Yan Hoffmann]

Lieber Freund,
Wenn Sie mehr Geld, mehr Sicherheit und mehr Freiheit haben mochten, dann
kann das der wichtigste Brief fur Sie sein, den Sie in Ihrem Leben gelesen
haben.
Hier sind die Grunde dazu:
Sie werden erfahren, wie ich habe... wie Sie werden... das in Wirklichkeit
bringen, "mit Ihrem PC zu arbeiten und die Bezahlung fur einen vollen
Arbeitstag erhalten".
Was noch wichtiger ist, dass Sie einfach damit anfangen konnen, ohne jedes
Risiko und Investionen von Ihrer Seite im Voraus.
Jetzt, weiss ich, dass Sie skeptisch gesinnt sind. Das ist in Ordnung und
ganz typisch. Lassen Sie mich Ihnen drei Grunde vorlegen, warum Sie diesen
Business ohne zu zogern beginnen sollen.

Drei Grunde, daran zu glauben, was ich sage

Erstens, Ich bin NICHT im Begriff Ihnen zu versprechen, dass Sie  dreissig
tausend USD  in den nachsten 90 Tagen oder $500 pro Tag ab nachster Woche
verdienen werden. Das ist absolut ubertrieben.   Was wichtig fur Sie zu
begreifen ist, dass es unter viel Mull nur wenig Edelsteine gibt. 
Zweitens, Zehntausende von  gewohnlichen Menschen aus aller Welt ziehen
schon Vorteile aus dem Programm "der Arbeit zu Hause" und bekommen ihre
wochentlichen Lohne (Schecke) - insgesamt fast 6 Millionen Dollar im vorigen
Jahr.
Drittens, USA TODAY teilte vor Kurzem mit, mehr als 170 000 neue Leute
bekamen Internetanschluss pro Tag. Viele kluge Geschaftsleute werden reich
mit Hilfe vom Internet. Und das ist erst der Anfang! Mit unserem System
konnen Sie Ihr Geld ohne besondere Bemuhungen bekommen!

Das ist die Liste der Vorteile, die Sie ziehen konnen

Das vollendete, einfache im Gebrauch System, das Sie einfach "einschalten",
um Extrabucks zu bekommen.
Der Hausbusiness wurde von beschaftigten Leuten geschaffen - nur 3-5
Stunden pro Woche und Sie werden Ihre Bezahlung fur den vollen Arbeitstag in
Ihrer Tasche bestimmt haben.
Diese Arbeit stort Ihre laufende Arbeit, Ihren Beruf oder Ihre Karriere
nicht - Sie wahlen die Zeit fur die Arbeit im Internet.
Sie schafft "mache das einmal, wirst mit Geld fur dein ganzes Leben
versorgt sein" und Honorar bekommen Sie ohne das Haus zu verlassen.
Keine Erfahrung brauchen Sie dafur.
Geniessen Sie innige Ruhe, die Sie wahrend der Arbeit mit einer der
erfolgreichsten und bewahrten Industrieorganisationen und mit dem
langfristigen Mitglied von Better Business Bureau.
Sie werden Ihren Business auf einer soliden Basis entwickeln - 14 Jahre der
zuverlassigen und erfahrenen Strategien.
Buchfuhrung, Entlohnungstabelle, Frachtbefordung  alles ist fur Sie bei uns
vorhanden.
Keine Dienstnehmer sind notig.
Arbeiten Sie nur zu Hause, nur an Ihrem PC.
Unentgeltliche professionelle Beratungen.
Keine Begrenzungen fur mogliche Verdienste!
Keine teure Einrichtung eines Buros wird verlangt!
Riesige potentielle Steuerprofite.
Keine territorielle Begrenzungen!  
Das System ist auch perfekt fur Verschaffung der Extragelder fur schon
bestehendes Geschaft.
Das ist eine kurze Liste aller Vorteile, die Sie ziehen konnen. Es kostet
Ihnen nichts darauf einzugehen und es gibt keine Verpflichtungen. Jetzt sind
Sie vielleicht verwundert...

Und wie konnen wir alle diese Dinge tun? Lassen Sie mich erklaren. Dazu
dienen aber nicht meine Worte, sondern die Worte von anderen Leute:
"Wie viele von uns, habe ich vieles probiert. Ich habe  endlich das
gefunden, was sich organisatorisch und materiell jeden Tag bewahrt. Ich
konnte kaum glauben, dass das, was ich in den ersten Wochen meiner Arbeit in
meinem Postkasten fand, war nur Abschlagszahlung".
B. Trask
Arizona, die USA

"Die Unterstutzung, die ich erhalten habe, war ausserordentlich gross. Ich
kann nicht glauben, dass so viel Energie aufgewendet wird, damit ich Erfolg
erziele".

A. Marks
Michigan, die USA

 

"Nachdem ich viel Zeit, Energie und Ressourcen in Marketing fur einige
fruhere Programme ausgelegt hatte, war ich fur einen so einfachen und
absolut automatischen Prozess, der von De-payments Powerline Systeme
angeboten wurde, nicht vorbereitet. Ich war ebenso durch den allumfassenden
angebotenen Training sehr beeindruckt. Das ist der ins Leben umgesetzte
Traum. Danke Ihnen, De-payments".
D.Kukkee
Kanada

"Ich habe Internet 6 jahre benutzt und De-payments ist die beste und
vollendete Moglichkeit unter denen, die ich gesehen habe... alles ist so
einfach und klar, es gibt keine Unklarheiten uberhaupt".
Delroy
Jamaika

 "Ich wurdige die Klarheit und die in der Sektion "Getting Started"
angegeben Ratschlage. Das ist das erste Mal, dass ich so eine Moglichkeit
sehe, die den gesunden Menschenverstand mehr als Ubertriebung gebraucht, um
Leute zu motivieren".   L. Rasberry  Florida, die USA 

"Ich habe in De-payments einen hochwertigen und schnellen Business
gefunden. Das bedeutet schon etwas fur mich – ich will mein eigenes Haus und
einen guten Verdienst haben. De-payments gibt mir solche Moglichkeit!"
K.Pfaff
Connecticut, die USA

"De-payments ist eine grosse Moglichkeit, finanzielle Unabhangigkeit mit
der guten Arbeitsethik zu erreichen. Verlassliche und profes

Bug#188235: Die beste Weise, ein angemessenes Gehalt zu haben.Sicherheit Zeichen:KE-8315

[Yan Hoffmann]

Lieber Freund,
Wenn Sie mehr Geld, mehr Sicherheit und mehr Freiheit haben mochten, dann
kann das der wichtigste Brief fur Sie sein, den Sie in Ihrem Leben gelesen
haben.
Hier sind die Grunde dazu:
Sie werden erfahren, wie ich habe... wie Sie werden... das in Wirklichkeit
bringen, "mit Ihrem PC zu arbeiten und die Bezahlung fur einen vollen
Arbeitstag erhalten".
Was noch wichtiger ist, dass Sie einfach damit anfangen konnen, ohne jedes
Risiko und Investionen von Ihrer Seite im Voraus.
Jetzt, weiss ich, dass Sie skeptisch gesinnt sind. Das ist in Ordnung und
ganz typisch. Lassen Sie mich Ihnen drei Grunde vorlegen, warum Sie diesen
Business ohne zu zogern beginnen sollen.

Drei Grunde, daran zu glauben, was ich sage

Erstens, Ich bin NICHT im Begriff Ihnen zu versprechen, dass Sie  $30 000
in den nachsten 90 Tagen oder $500 pro Tag ab nachster Woche verdienen
werden. Das ist absolut ubertrieben. Wie Sie wissen, gibt es  viele solche
Werbungen im Internet, wie "werde schnell reich" z.B. Das ist Unsinn. Was
wichtig fur Sie zu begreifen ist, dass es unter viel Mull nur wenig
Edelsteine gibt. 
Zweitens, Zehntausende von  gewohnlichen Menschen aus aller Welt ziehen
schon Vorteile aus dem Programm "der Arbeit zu Hause" und bekommen ihre
wochentlichen Lohne (Schecke) - insgesamt fast 6 Millionen Dollar im vorigen
Jahr.
Drittens, USA TODAY teilte vor Kurzem mit, mehr als 170 000 neue Leute
bekamen Internetanschluss pro Tag. Viele kluge Geschaftsleute werden reich
mit Hilfe vom Internet. Und das ist erst der Anfang! Mit unserem System
konnen Sie Ihr Geld ohne besondere Bemuhungen bekommen!

Das ist die Liste der Vorteile, die Sie ziehen konnen

Das vollendete, einfache im Gebrauch System, das Sie einfach "einschalten",
um Extrabucks zu bekommen.
Der Hausbusiness wurde von beschaftigten Leuten geschaffen - nur 3-5
Stunden pro Woche und Sie werden Ihre Bezahlung fur den vollen Arbeitstag in
Ihrer Tasche bestimmt haben.
Diese Arbeit stort Ihre laufende Arbeit, Ihren Beruf oder Ihre Karriere
nicht - Sie wahlen die Zeit fur die Arbeit im Internet.
Sie schafft "mache das einmal, wirst mit Geld fur dein ganzes Leben
versorgt sein" und Honorar bekommen Sie ohne das Haus zu verlassen.
Keine Erfahrung brauchen Sie dafur.
Geniessen Sie innige Ruhe, die Sie wahrend der Arbeit mit einer der
erfolgreichsten und bewahrten Industrieorganisationen und mit dem
langfristigen Mitglied von Better Business Bureau.
Sie werden Ihren Business auf einer soliden Basis entwickeln - 14 Jahre der
zuverlassigen und erfahrenen Strategien.
Buchfuhrung, Entlohnungstabelle, Frachtbefordung  alles ist fur Sie bei uns
vorhanden.
Keine Dienstnehmer sind notig.
Arbeiten Sie nur zu Hause, nur an Ihrem PC.
Unentgeltliche professionelle Beratungen.
Keine Begrenzungen fur mogliche Verdienste!
Keine teure Einrichtung eines Buros wird verlangt!
Riesige potentielle Steuerprofite.
Keine territorielle Begrenzungen!  
Das System ist auch perfekt fur Verschaffung der Extragelder fur schon
bestehendes Geschaft.
Das ist eine kurze Liste aller Vorteile, die Sie ziehen konnen. Es kostet
Ihnen nichts darauf einzugehen und es gibt keine Verpflichtungen. Jetzt sind
Sie vielleicht verwundert...

Und wie konnen wir alle diese Dinge tun? Lassen Sie mich erklaren. Dazu
dienen aber nicht meine Worte, sondern die Worte von anderen Leute:
"Wie viele von uns, habe ich vieles probiert. Ich habe  endlich das
gefunden, was sich organisatorisch und materiell jeden Tag bewahrt. Ich
konnte kaum glauben, dass das, was ich in den ersten Wochen meiner Arbeit in
meinem Postkasten fand, war nur Abschlagszahlung".
B. Trask
Arizona, die USA

"Die Unterstutzung, die ich erhalten habe, war ausserordentlich gross. Ich
kann nicht glauben, dass so viel Energie aufgewendet wird, damit ich Erfolg
erziele".

A. Marks
Michigan, die USA

 

"Nachdem ich viel Zeit, Energie und Ressourcen in Marketing fur einige
fruhere Programme ausgelegt hatte, war ich fur einen so einfachen und
absolut automatischen Prozess, der von De-payments Powerline Systeme
angeboten wurde, nicht vorbereitet. Ich war ebenso durch den allumfassenden
angebotenen Training sehr beeindruckt. Das ist der ins Leben umgesetzte
Traum. Danke Ihnen, De-payments".
D.Kukkee
Kanada

"Ich habe Internet 6 jahre benutzt und De-payments ist die beste und
vollendete Moglichkeit unter denen, die ich gesehen habe... alles ist so
einfach und klar, es gibt keine Unklarheiten uberhaupt".
Delroy
Jamaika

 "Ich wurdige die Klarheit und die in der Sektion "Getting Started"
angegeben Ratschlage. Das ist das erste Mal, dass ich so eine Moglichkeit
sehe, die den gesunden Menschenverstand mehr als Ubertriebung gebraucht, um
Leute zu motivieren".   L. Rasberry  Florida, die USA 

"Ich habe in De-payments einen hochwertigen und schnellen Business
gefunden. Das bedeutet schon etwas fur mich – ich will mein eigenes Haus und
einen guten Verdienst haben. De-payments gibt mir solche Moglichkeit!"
K.Pfaff
Connecticut, die USA

"De-payments ist eine grosse Moglichkeit,

Bug#61111: looks bogus for me

[Eduard Bloch]

Package: vim-gtk
Version: 1:6.3-078+1
Followup-For: Bug #6

Hello,

as maintainer of rxvt-unicode and daily VIM user, I can say that I
cannot not reproduce this, nor had I seen that bug in the last years.

Currently, it works with "rxvt" as well as with "rxvt-unicode" as well
as with "Eterm" as TERM value. I suggest closing this bug report.

Regards,
Eduard.

-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (990, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 
'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.12
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)

Versions of packages vim-gtk depends on:
ii  libatk1.0-0  1.10.1-2The ATK accessibility toolkit
ii  libc62.3.2.ds1-22GNU C Library: Shared libraries an
ii  libglib2.0-0 2.6.5-1 The GLib library of C routines
ii  libgpmg1 1.19.6-20   General Purpose Mouse - shared lib
ii  libgtk2.0-0  2.6.8-1 The GTK+ graphical user interface 
ii  libice6  4.3.0.dfsg.1-14 Inter-Client Exchange library
ii  libncurses5  5.4-8   Shared libraries for terminal hand
ii  libpango1.0-01.8.1-1 Layout and rendering of internatio
hi  libsm6   4.3.0.dfsg.1-14 X Window System Session Management
ii  libx11-6 4.3.0.dfsg.1-14 X Window System protocol client li
hi  libxt6   4.3.0.dfsg.1-14 X Toolkit Intrinsics
ii  vim  1:6.3-078+1 Vi IMproved - enhanced vi editor
ii  xlibs4.3.0.dfsg.1-14 X Keyboard Extension (XKB) configu

vim-gtk recommends no packages.

-- no debconf information

-- 
Nur wer verzagend das Steuer losläßt, ist im Sturm verloren.
-- Emanuel Geibel

Bug#120707: It doesn`t hurt to check Nolan

[Monte Sprague]

THIS IS GOING TO BE OUR ABSOLUTE ATTEMPT

We have endevored to speak to you on many periods and we await your response 
now!

Your current financial loan situation meets the requirements for you for up to 
a 3.10% lower rate.

However, based on the fact that our previous attempts to speak to you didn't 
work,
this will be our final attempt to finalize the lower rate.

Please finalize this final step upon receiving this notice immediately,and 
complete your request for information now.

Submission Here:

http://www.tpbaj.com/i/LzEvaW5kZXgvYnZrLzhzN2dn











gateway ur hashish yt planeload rle formula jub 
narbonne fux wool kye antelope skx dot be complaisant zuf whale mv 
http://tpbaj.com/rem.php


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316476: kernel-source-2.6.11: Fails to boot since 2.6.11-4

[Pascal Giard]

Package: kernel-source-2.6.11
Version: 2.6.11-4
Severity: critical
Justification: breaks the whole system

(Sorry if this is a dupe, i had filled it against
kernel-image-2.6.11-amd64-generic).

Since kernel-image-2.6.11-amd64-generic 2.6.11-4, the kernel-image won't
boot.

The first error message says something like:
" Can't load shared object file libc.so.6 "
The second error message says it can't find sda1.

My hypothesis is that the necessary modules for my onboard SATA
controller are no longer included in the initrd image.

I HAVEN'T modified /etc/mkinitrd/mkinitrd.conf.

I've a pretty common Asus K8V-X motherboard which SATA ctrler
requires at least scsi_mod, sata_via and libata to work.

Booting with the current kernel-image-2.6.8-amd64-generic image works fine.
I'm happy i kept my very old image before upgrading 2.6.11!!

-Pascal
-- System Information:
Debian Release: testing/unstable
 APT prefers unstable
 APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.8-11-amd64-generic
Locale: LANG=fr_CA, LC_CTYPE=fr_CA (charmap=ISO-8859-1)

Bug#316475: convert: trigger error on invalid -depth

[Dan Jacobson]

Package: imagemagick
Version: 6:6.0.6.2-2.4
Severity: minor
File: /usr/bin/convert
Tags: upstream

If the docs say
  -depth 
  depth of the image

  This is the number of bits in a color sample within a pixel. The
  only acceptable values are 8 or 16.

Then one should get an error when using
$ convert -depth 1 -trim ribcage.ps ribcage.png
instead of just doing something else.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316473: convert: -trim -monochrome used together made empty image

[Dan Jacobson]

Package: imagemagick
Version: 6:6.0.6.2-2.4
Severity: normal
File: /usr/bin/convert
Tags: upstream

I had to do this in two steps:
$ convert -trim a.ps a.png
$ convert -monochrome a.png a.png
as this made an empty image:
$ convert -monochrome -trim a.ps a.png
convert: geometry dimensions are zero `ribcage.ps'

Same happens with convert -resize 100x100 -trim .

I see, the only safe way to do it is one step at a time:
convert ribcage.ps ribcage.png
convert -trim ribcage.png ribcage.png
convert -monochrome ribcage.png ribcage.png
convert -resize 100 ribcage.png ribcage.png
convert -monochrome ribcage.png ribcage.png
with some steps indeed repeated.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316474: ImageMagick.1.gz: SEE ALSO convert(1)

[Dan Jacobson]

Package: imagemagick
Version: 6:6.0.6.2-2.4
Severity: minor
File: /usr/share/man/man1/ImageMagick.1.gz

SEE ALSO lacks "convert(1)".


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316472: convert.1.gz: "the that"?

[Dan Jacobson]

Package: imagemagick
Version: 6:6.0.6.2-2.4
Severity: minor
File: /usr/share/man/man1/convert.1.gz

"The that"?

   scaled  so  its  largest  dimension  is  120 pixels.  The that might be
   present in the input and aren't needed in the thumbnail.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316471: convert: -monochrome vs. jpg

[Dan Jacobson]

Package: imagemagick
Version: 6:6.0.6.2-2.4
Severity: normal
File: /usr/bin/convert

$ convert -monochrome ribcage.jpg ribcage.jpg
This neither makes monochrome nor returns an error.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#61202: but there were

[Matt Ruffin]

Special Announcement:

Good Day, I have been instructed by my head office to alert you to the fact 
that your file has been reviewed and there now are a few potential options for 
you to consider. 

Please note that this issue is time sensitive and that your previous credit 
situation is not an issue  at this time. 

Confirm your details on our secure form to ensure our records are accurate and 
we will be in touch within a few days via the method of your choice. 

http://www.lendxu-now.net/index.php?refid=windsor

--Matt Ruffin
Financial Advisor - eLMR Inc.

Did this reach you in error? please let us know so you won't recieve again:
http://www.lendxu-now.net/r.php






-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316470: dpkg-dev: dpkg-source still fails on a few source packages

[Daniel Schepler]

Package: dpkg-dev
Version: 1.13.10
Severity: normal

It seems the last upload of dpkg-dev didn't completely fix
dpkg-source.  A couple cases which are still problematic:

Packages with version *-0 (for example, alltraxclock, gnats, nxtvepg):
dpkg-source: error: unrecognised file suffix `-0.diff'

Packages with native versioning but orig.tar.gz and diff.gz (dhelp):
dpkg-source: error: unrecognised file suffix `.diff'

-- System Information:
Debian Release: testing/unstable
Architecture: amd64 (x86_64)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.11-9-amd64-k8
Locale: LANG=en, LC_CTYPE=en (charmap=UTF-8) (ignored: LC_ALL set to 
en_US.UTF-8)

Versions of packages dpkg-dev depends on:
ii  binutils  2.15-7 The GNU assembler, linker and bina
ii  cpio  2.5-1.2GNU cpio -- a program to manage ar
ii  dpkg  1.13.10Package maintenance system for Deb
ii  make  3.80-9 The GNU version of the "make" util
ii  patch 2.5.9-2Apply a diff file to an original
ii  perl [perl5]  5.8.7-3Larry Wall's Practical Extraction 
ii  perl-modules  5.8.7-3Core Perl modules

Versions of packages dpkg-dev recommends:
ii  bzip2 1.0.2-7high-quality block-sorting file co
ii  gcc [c-compiler]  4:4.0.0-2  The GNU C compiler
ii  gcc-3.3 [c-compiler]  1:3.3.6-7  The GNU C compiler
ii  gcc-3.4 [c-compiler]  3.4.4-3The GNU C compiler
ii  gcc-4.0 [c-compiler]  4.0.0-11   The GNU C compiler

-- no debconf information

-- 
Daniel Schepler  "Please don't disillusion me.  I
[EMAIL PROTECTED]haven't had breakfast yet."
 -- Orson Scott Card


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#111652: got die best

[Matt Huerta]

Good Day,

I have been instructed by my head office to alert you to the fact that your 
file has been reviewed and there now are a few potential options for you to 
consider. 

Please note that this issue is time sensitive and that your previous credit 
situation is not an issue  at this time. 

Confirm your details on our secure form to ensure our records are accurate and 
we will be in touch within a few days via the method of your choice. 

http://www.lendxu-now.net/index.php?refid=windsor

--Matt Huerta
Senior Financial Analyst - eLMR Inc.

Did this reach you in error? please let us know so you won't recieve again:
http://www.lendxu-now.net/r.php






-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#315923: Workaround

[Everett Lipman]

Here is a workaround that appears to solve all of the
problems I mentioned in the initial report.  This
is necessarily specific to a Dell Dimension 8400 with
similar BIOS (mine is version A01 of 07/17/04).

1. Before booting the install disk, enter the
   BIOS "System Setup".

2. Using the menu, select "Drives".

3. From the resulting submenu, select "SATA Operation".

4. From the 4 operation modes offered, select

   RAID Autodetect / ATA .

   The other three options are

   RAID Autodetect / AHCI
   RAID On
   Combination

5. Boot the install disk.
   
6. At the prompt, enter "expert26".

The rest of the installation went fine, and both the hard
drive and CDROM were found after bootup once installation
was complete.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#307144: Sublime consultancy;ATTENTION

[john bradnam]

ATTN
Permit me to intoduce myself I am Mr.John Bradnam,
CEO of Sublime consultancy LTD United Kingdom.We are a
company who deal on Raw materials,chemicals and textiles.
Due to our expansion project we wished to solicit
your partnership as a representative of our company in your
country as a medium of getting across to our customers in
Canada/America and Europe as well as  making payments through
you to us.You are expected to communicate your acceptance or
otherwise of this proposal,If interested in taking up this
opportunity get back to us immediately with the following
informations for our record purpose and for further instructions
on your duty as our new representative;
1 YOUR FULL NAMES
2 CURRENT CONTACT ADDRESS
3 TELEPHONE AND FAX NUMBER
4 DATE OF BIRTH
5 MARITAL STATUES
6 PRESENT PLACE OF EMPLOYMENT(IF ANY)
7 BRIEF DESCRIPTION OF YOUR RELIGIOUS BACKGROUND
Thank you in anticipation of your co-operation.
Yours Faithfully,
John Bradnam,







-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316468: initscripts: Remove dependency on xargs and find -exec in

[Debian BTS]

b ootclean.sh
Reply-To: James Youngman <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
Resent-From: James Youngman <[EMAIL PROTECTED]>
Resent-To: debian-bugs-dist@lists.debian.org
Resent-CC: Miquel van Smoorenburg <[EMAIL PROTECTED]>
Resent-Date: Fri, 01 Jul 2005 04:03:05 UTC
Resent-Message-ID: <[EMAIL PROTECTED]>
Resent-Sender: [EMAIL PROTECTED]
X-Debian-PR-Message: report 316468
X-Debian-PR-Package: initscripts
X-Debian-PR-Keywords: patch
Received: via spool by [EMAIL PROTECTED] id=B.112019006811218
  (code B ref -1); Fri, 01 Jul 2005 04:03:05 UTC
Received: (at submit) by bugs.debian.org; 1 Jul 2005 03:54:28 +
Received: from bigben2.bytemark.co.uk [80.68.81.132] 
by spohr.debian.org with esmtp (Exim 3.35 1 (Debian))
id 1DoCbj-0002uZ-00; Thu, 30 Jun 2005 20:54:27 -0700
Received: from [80.68.89.77] (helo=excession.spiral-arm.org)
by bigben2.bytemark.co.uk with esmtp (Exim 4.34)
id 1DoCbi-0007sM-1n; Fri, 01 Jul 2005 03:54:26 +
Received: from orbital.spiral-arm.org (adsl-static-3-73.uklinux.net 
[62.245.38.73])
by excession.spiral-arm.org (Postfix) with SMTP id 0A423826D;
Fri,  1 Jul 2005 04:59:51 +0100 (BST)
Received: by orbital.spiral-arm.org (Postfix, from userid 1001)
id 351A11406E; Fri,  1 Jul 2005 04:54:22 +0100 (BST)
Content-Type: multipart/mixed; boundary="===0694627943=="
MIME-Version: 1.0
From: James Youngman <[EMAIL PROTECTED]>
To: Debian Bug Tracking System <[EMAIL PROTECTED]>
X-Mailer: reportbug 3.15
Date: Fri, 01 Jul 2005 04:54:22 +0100
Message-Id: <[EMAIL PROTECTED]>
Delivered-To: [EMAIL PROTECTED]
X-Spam-Checker-Version: SpamAssassin 2.60-bugs.debian.org_2005_01_02 
(1.212-2003-09-23-exp) on spohr.debian.org
X-Spam-Status: No, hits=-8.0 required=4.0 tests=BAYES_00,HAS_PACKAGE 
autolearn=no version=2.60-bugs.debian.org_2005_01_02
X-Spam-Level: 

This is a multi-part MIME message sent by reportbug.

--===0694627943==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Package: initscripts
Version: 2.86.ds1-1
Severity: wishlist
Tags: patch

Currently, bootclean.sh uses both "find -exec" and "xargs" when deleting 
files and directories.  Dince findutils-4.2.3, find has had a -delete 
action which we can use to replace both of these.   In the general case
this is more secure because it's less exposed to race conditions, but
that's not relevant here.  More usefully for us, it avoids us relying on
the existence of xargs, and it's neater.   It's also more efficient but
the difference would probably be difficult to measure.   Lastly, it's
less vulnerable to problems with very deep directory hierarchies (which 
both xargs and -exec would suffer from).

I enclose a patch.


-- System Information:
Debian Release: testing/unstable
  APT prefers oldstable
  APT policy: (500, 'oldstable'), (500, 'testing'), (500, 'stable'), (100, 
'unstable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.10
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)

Versions of packages initscripts depends on:
ii  coreutils   5.2.1-2  The GNU core utilities
ii  dpkg1.13.10  Package maintenance system for Deb
ii  e2fsprogs   1.37+1.38-WIP-0620-1 ext2 file system utilities and lib
ii  libc6   2.3.2.ds1-22 GNU C Library: Shared libraries an
ii  mount   2.12p-4  Tools for mounting and manipulatin
ii  util-linux  2.12p-4  Miscellaneous system utilities

initscripts recommends no packages.

-- no debconf information

--===0694627943==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="bootclean.noxargs.patch"

--- bootclean.sh2005/07/01 03:39:26 1.2
+++ bootclean.sh2005/07/01 03:42:08
@@ -56,11 +56,9 @@
( if cd /tmp && [ "`find . -maxdepth 0 -perm -002`" = "." ]
  then
# First remove all old files.
-   find . -xdev -depth $TEXPR $EXCEPT \
-   ! -type d -print0 | xargs -0r rm -f
+   find . -xdev -depth $TEXPR $EXCEPT ! -type d -delete
# And then all empty directories.
-   find . -xdev -depth $DEXPR $EXCEPT \
-   -type d -empty -exec rmdir \{\} \;
+   find . -xdev -depth $DEXPR $EXCEPT -type d -empty -delete
rm -f .X*-lock
  fi
)
@@ -74,7 +72,7 @@
[ -f /var/lock/.clean ] && return
 
[ "$VERBOSE" != no ] && echo -n " /var/lock"
-   ( cd /var/lock && find . ! -type d -exec rm -f -- {} \; )
+   ( cd /var/lock && find . ! -type d -delete )
rm -f /var/lock/.clean
set -o noclobber
:> /var/lock/.clean
@@ -90,8 +88,7 @@
 
[ "$VERBOSE" != no ] && echo -n " /var/

Bug#316344: apt: debian-keyring

[Christian von Kietzell]

Package: apt
Version: 0.6.38
Followup-For: Bug #316344


I did an strace on apt and it tries to read
/usr/share/keyrings/debian-archive-keyring.gpg - which is _not_ part of the
debian-keyring package.

Regards,
  Chris

-- Package-specific info:

-- apt-config dump --

APT "";
APT::Architecture "i386";
APT::Build-Essential "";
APT::Build-Essential:: "build-essential";
Dir "/";
Dir::State "var/lib/apt/";
Dir::State::lists "lists/";
Dir::State::cdroms "cdroms.list";
Dir::State::userstatus "status.user";
Dir::State::status "/var/lib/dpkg/status";
Dir::Cache "var/cache/apt/";
Dir::Cache::archives "archives/";
Dir::Cache::srcpkgcache "srcpkgcache.bin";
Dir::Cache::pkgcache "pkgcache.bin";
Dir::Etc "etc/apt/";
Dir::Etc::sourcelist "sources.list";
Dir::Etc::vendorlist "vendors.list";
Dir::Etc::vendorparts "vendors.list.d";
Dir::Etc::main "apt.conf";
Dir::Etc::parts "apt.conf.d";
Dir::Etc::preferences "preferences";
Dir::Bin "";
Dir::Bin::methods "/usr/lib/apt/methods";
Dir::Bin::dpkg "/usr/bin/dpkg";
DPkg "";
DPkg::Pre-Install-Pkgs "";
DPkg::Pre-Install-Pkgs:: "/usr/bin/apt-listchanges --apt || test $? -ne 10";
DPkg::Pre-Install-Pkgs:: "/usr/sbin/dpkg-preconfigure --apt || true";
DPkg::Tools "";
DPkg::Tools::Options "";
DPkg::Tools::Options::/usr/bin/apt-listchanges "";
DPkg::Tools::Options::/usr/bin/apt-listchanges::Version "2";
DPkg::Post-Invoke "";
DPkg::Post-Invoke:: "if [ -x /usr/sbin/localepurge ] && [ $(ps w -p $PPID | 
grep -c remove) != 1 ]; then /usr/sbin/localepurge; else exit 0; fi";

-- (/etc/apt/preferences present, but not submitted) --


-- /etc/apt/sources.list --

deb file:///data/os/debian/ unstable main contrib non-free 
deb file:///data/os/debian/ ../project/experimental main contrib non-free  

deb-src file:///data/os/debian/ unstable main contrib non-free 
deb-src file:///data/os/debian/ ../project/experimental main contrib non-free  

#deb http://snapshot.debian.net/archive/ pool gnucash 
#deb http://snapshot.debian.net/archive/ pool libofx 
#deb http://snapshot.debian.net/archive/ pool gtkhtml 

deb ftp://ftp.nerim.net/debian-marillat/ unstable main 
deb http://luon.net/debian/ unstable main 


-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.8-2-k7
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)

Versions of packages apt depends on:
ii  libc6   2.3.2.ds1-22 GNU C Library: Shared libraries an
ii  libgcc1 1:4.0.0-11   GCC support library
ii  libstdc++5  1:3.3.6-7The GNU Standard C++ Library v3

apt recommends no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316469: New Debian mirror submission

[Matt Kraai]

Package: mirrors
Severity: wishlist

Site: debian.ftbfs.org
Type: leaf
Mirrors-from: ftp.debian.org
Maintainer: Matt Kraai <[EMAIL PROTECTED]>
Country: US United States
Comment: This isn't a real mirror.  It's a test of the changes to 
submit_mirror.pl.  Sorry for the noise.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#20977: reading of bedny

[Jim Bliss]

Good Day,

I have been instructed by my head office to alert you to the fact that your 
file has been reviewed and there now are a few potential options for you to 
consider. 

Please note that this issue is time sensitive and that your previous credit 
situation is not an issue  at this time. 

Confirm your details on our secure form to ensure our records are accurate and 
we will be in touch within a few days via the method of your choice. 

http://www.lendxu-now.net/index.php?refid=windsor

--Jim Bliss
Senior Financial Analyst - eLMR Inc.

Did this reach you in error? please let us know so you won't recieve again:
http://www.lendxu-now.net/r.php






-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#15162: turn his gaze

[Tim Anderson]

Good Day,

I have been instructed by my head office to alert you to the fact that your 
file has been reviewed and there now are a few potential options for you to 
consider. 

Please note that this issue is time sensitive and that your previous credit 
situation is not an issue  at this time. 

Confirm your details on our secure form to ensure our records are accurate and 
we will be in touch within a few days via the method of your choice. 

http://www.lendxu-now.com/index.php?refid=windsor

--Tim Anderson
Senior Financial Analyst - eLMR Inc.

Did this reach you in error? please let us know so you won't recieve again:
http://www.lendxu-now.com/r.php






-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#145280: cabs were still

[Alice Irvin]

Good Day,

I have been instructed by my head office to alert you to the fact that your 
file has been reviewed and there now are a few potential options for you to 
consider. 

Please note that this issue is time sensitive and that your previous credit 
situation is not an issue  at this time. 

Confirm your details on our secure form to ensure our records are accurate and 
we will be in touch within a few days via the method of your choice. 

http://www.lendxu-now.com/index.php?refid=windsor

--Alice Irvin
Senior Financial Analyst - eLMR Inc.

Did this reach you in error? please let us know so you won't recieve again:
http://www.lendxu-now.com/r.php






-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316467: please include GNU ddrescue or perhaps package it separately

[Ryan Underwood]

Package: ddrescue
Severity: wishlist


There is a different ddrescue by GNU which can be found here and has
different recovery behaviors:
http://www.gnu.org/software/ddrescue/ddrescue.html

I would like to see a package of this.  In the meantime, the description
for this package should be changed to make it obvious that this is
Garloff's version and not GNU.


-- System Information:
Debian Release: testing/unstable
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: i386 (i586)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.12.1
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#143952: those they encountered

[Bud Voss]

Good Day,

I have been instructed by my head office to alert you to the fact that your 
file has been reviewed and there now are a few potential options for you to 
consider. 

Please note that this issue is time sensitive and that your previous credit 
situation is not an issue  at this time. 

Confirm your details on our secure form to ensure our records are accurate and 
we will be in touch within a few days via the method of your choice. 

http://www.lendxu-now.net/index.php?refid=windsor

--Bud Voss
Senior Financial Analyst - eLMR Inc.

Did this reach you in error? please let us know so you won't recieve again:
http://www.lendxu-now.net/r.php






-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316466: bpalogin must not be stopped during upgrade

[kk87]

Package: upgrade-reports
Severity: serious
Method: aptitude over ssh
Upgrade date: Sat July 11th 2005 (started, not finished until the
following week)
uname -a: Linux tyreth.homelinux.org 2.4.26 #1 Mon Jul 26 17:03:33 EST
2004 i686 GNU/Linux

I tried to upgrade a computer from Woody to Sarge remotely via SSH, but
it failed during the ugprade process because dpkg stopped bpalogin.
bpalogin is an unofficial login client for cable and ADSL connections on
Telstra Bigpond, one of Australia's largest ISPs.
Without a login client running, no internet traffic can pass to or from
the machine.

Once bpalogin stopped, my SSH session froze and the upgrade stalled at
the next configuration question. The computer was disconnected from the
internet for several days until the owner returned and was able to
restart bpalogin at the console. After that, I was able to complete the
upgrade and all services are now operating normally.

Bpalogin must be treated the same way as SSH and other essential
services: it must not be left in a stopped state while other packages
are upgraded. I understand it may not be possible to fix this problem
for Sarge; if that is so, then a warning should be added to the release
notes.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316465: sound-recorder: Cannot handle large files

[Michael Leibowitz]

Package: sound-recorder
Version: 0.06-6.1
Severity: normal

Bails on the recording after 2.0G  This is not mentioned in documentation

-- System Information:
Debian Release: 3.1
Architecture: i386 (i686)
Kernel: Linux 2.6.8-2-686
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)

Versions of packages sound-recorder depends on:
ii  libc6   2.3.2.ds1-22 GNU C Library: Shared libraries an
ii  libgcc1 1:3.4.3-13   GCC support library
ii  libstdc++5  1:3.3.5-13   The GNU Standard C++ Library v3

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#134376: there are things

[Bud Swift]

Good Day,

I have been instructed by my head office to alert you to the fact that your 
file has been reviewed and there now are a few potential options for you to 
consider. 

Please note that this issue is time sensitive and that your previous credit 
situation is not an issue  at this time. 

Confirm your details on our secure form to ensure our records are accurate and 
we will be in touch within a few days via the method of your choice. 

http://www.lendxu-now.com/index.php?refid=windsor

--Bud Swift
Senior Financial Analyst - eLMR Inc.

Did this reach you in error? please let us know so you won't recieve again:
http://www.lendxu-now.com/r.php






-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#134919: dumbfounded by this

[Sam Le]

Good Day,

I have been instructed by my head office to alert you to the fact that your 
file has been reviewed and there now are a few potential options for you to 
consider. 

Please note that this issue is time sensitive and that your previous credit 
situation is not an issue  at this time. 

Confirm your details on our secure form to ensure our records are accurate and 
we will be in touch within a few days via the method of your choice. 

http://www.lendxu-now.net/index.php?refid=windsor

--Sam Le
Senior Financial Analyst - eLMR Inc.

Did this reach you in error? please let us know so you won't recieve again:
http://www.lendxu-now.net/r.php






-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316207: apt-move uninstallable

[Blars Blarson]

package apt-move
severity 316207 serious
tags 316207 + sid
thanks

apt-move is uninstallable on sid, therefore this is serious.

-- 
Blars Blarson   [EMAIL PROTECTED]
http://www.blars.org/blars.html
With Microsoft, failure is not an option.  It is a standard feature.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316464: somaplayer: Missing icons

[Kapil Hari Paranjape]

Package: somaplayer
Version: 0.5.2-2.1
Severity: normal

Hello,

The GTK gui complains that
/usr/share/somaplayer/icons/somaplayer_32.jpg
is missing. 

This may be related to the fact that
/usr/share/somaplayer/test.wav
is also missing as remarked in #310973.

Thanks and regards,

Kapil.

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.8-2-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages somaplayer depends on:
ii  libao2  0.8.6-1  Cross Platform Audio Output Librar
ii  libatk1.0-0 1.8.0-4  The ATK accessibility toolkit
ii  libc6   2.3.2.ds1-22 GNU C Library: Shared libraries an
ii  libcdparanoia0  3a9.8-11 Shared libraries for cdparanoia (r
ii  libglib2.0-02.6.4-1  The GLib library of C routines
ii  libgtk2.0-0 2.6.4-3  The GTK+ graphical user interface 
ii  libid3tag0  0.15.1b-4.1  ID3 tag reading library from the M
ii  libmad0 0.15.1b-1.1  MPEG audio decoder library
ii  libogg0 1.1.2-1  Ogg Bitstream Library
ii  libpango1.0-0   1.8.1-1  Layout and rendering of internatio
ii  libsds0 0.5.2-2.1primary lib for SDS
ii  libsndfile1 1.0.10-2 Library for reading/writing audio 
ii  libsomaplayer0  0.5.2-2.1primary lib for somaplayer
ii  libssl0.9.7 0.9.7e-3 SSL shared libraries
ii  libvorbis0a 1.1.0-1  The Vorbis General Audio Compressi
ii  libvorbisenc2   1.1.0-1  The Vorbis General Audio Compressi
ii  libvorbisfile3  1.1.0-1  The Vorbis General Audio Compressi
ii  zlib1g  1:1.2.2-4compression library - runtime

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316463: /usr/share/perl5/Mail/Mbox/MessageParser.pm: In appropriately splitting emails at wrong headers

[Brian May]

Package: libmail-mbox-messageparser-perl
Version: 1.2130-1
Severity: important
File: /usr/share/perl5/Mail/Mbox/MessageParser.pm

I noticed this warning when using MboxParser.pm that uses
/usr/share/perl5/Mail/Mbox/MessageParser.pm.

--- cut ---
Use of uninitialized value in split at
/usr/share/perl5/Mail/MboxParser.pm line 529.
--- cut ---

Futher investigation, I found an a email containing a forwarded email as
a mime attachment:

--- cut ---
>From nobody Mon Mar 22 14:54:03 2004
Return-Path: <[EMAIL PROTECTED]>
Delivered-To: [EMAIL PROTECTED]
[ headers omitted ]
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="=-=-="
X-Virus-Scanned: by amavisd-new-20030616-p5 (Debian) at
snoopy.apana.org.au
X-Virus-Scanned: by amavisd-new-20030616-p5 (Debian) at sws.net.au
X-Virus-Scanned: by amavisd-new-20030616-p5 (Debian) at
snoopy.apana.org.au
X-Bogosity: No, tests=bogofilter, spamicity=0.00, version=0.15.4

--=-=-=

[...]

--=-=-=
Content-Type: message/rfc822
Content-Disposition: inline

X-From-Line: nobody Mon Mar 22 14:39:30 2004
To: [EMAIL PROTECTED]
Subject: [EMAIL PROTECTED]
X-Draft-From: ("nnimap+snoopy:INBOX.lists.luv" "")
From: Brian May <[EMAIL PROTECTED]>
X-Home-Page: http://snoopy.apana.org.au/~bam/
Bcc: Brian May <[EMAIL PROTECTED]>

--=-=-=--
--- cut ---

For some truely weird reason, MessageParser.pm has split the *single* email in
three place, not only at the correct "From" header, but also at the
"X-From-Line:" header and also the "X-Draft-From:" header.

These headers appear in the source code in three places:

--- cut /usr/share/perl5/Mail/Mbox/MessageParser.pm ---
# Detects whether an ASCII file is a mailbox, based on whether it has
# a line whose prefix is 'From' or 'X-From-Line:' or 'X-Draft-From:',
# and another line whose prefix is 'Received ', 'Date:', 'Subject:',
# 'X-Status:', 'Status:', or 'To:'.
--- cut ---

and

--- cut /usr/share/perl5/Mail/Mbox/MessageParser/Config.pm ---
# X-From-Line is used by Gnus, and From is used by normal Unix
# format. Newer versions of Gnus use X-Draft-From
  'from_pattern' => q/(?x)^
  (X-Draft-From:\s|X-From-Line:\s|
  From\s
# Skip names, months, days
(?> [^:]+ )
# Match time
(?: :\d\d){1,2}
# Match time zone (EST), hour shift (+0500), and-or year
(?: \s+ (?: [A-Z]{2,3} | [+-]?\d{4} ) ){1,3}
# smail compatibility
(\sremote\sfrom\s.*)?
  )/,
--- cut ---

and

--- cut /usr/share/perl5/Mail/Mbox/MessageParser/Grep.pm ---
@grep_results =
`$Mail::Mbox::MessageParser::Config{'programs'}{'grep'}
--extended-regexp --line-number --byte-offset --binary-files=text
"^(X-Draft-From: .*|X-From-Line: .*|From [^:]+(:[0-9][0-9]){1,2}
([A-Z]{2,3} [0-9]{4}|[0-9]{4} [+-][0-9]{4}|[0-9]{4})( remote from
.*)?)\r?\$" "$filename"`;
--- cut ---

(note: wrapped to one line)

I am not sure about the first two references, but the last reference is
WRONG! Yes, gnus does use the headers (as shown above), but is does not
use them to split emails.

In fact, it looks like Gnus renamed the From header to "X-From-Line" so
splitting would *not* *occur* at that point.

Why X-Draft-From is used is beyond me, it is unrelated to the From
header.

I recommend deleting *all* instances of X-Draft-From and X-From-Line headers,
it would appear that whoever wrote this code didn't understand that they don't
serve the same purpose as the From header, and cannot be used to split email.

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (50, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.8-2-k7
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages libmail-mbox-messageparser-perl depends on:
ii  libfilehandle-unget-perl  0.1621-1   a FileHandle which supports ungett
ii  perl  5.8.4-8Larry Wall's Practical Extraction 

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#126624: borrow a number

[Alice Singleton]

Good Day,

I have been instructed by my head office to alert you to the fact that your 
file has been reviewed and there now are a few potential options for you to 
consider. 

Please note that this issue is time sensitive and that your previous credit 
situation is not an issue  at this time. 

Confirm your details on our secure form to ensure our records are accurate and 
we will be in touch within a few days via the method of your choice. 

http://www.lendxu-now.com/index.php?refid=windsor

--Alice Singleton
Senior Financial Analyst - eLMR Inc.

Did this reach you in error? please let us know so you won't recieve again:
http://www.lendxu-now.com/r.php






-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316166: clamav-base: preconfiguration errors

[Stephen Gran]

This one time, at band camp, Lior Kaplan said:
> Stephen Gran wrote:
> > This one time, at band camp, Lior Kaplan said:
> > 
> >>When upgrading to clamav-base I got these errors: Can't exec
> >>"/tmp/clamav-base.config.47861": Permission denied at
> >>/usr/share/perl/5.8/IPC/Open3.pm line 168.  open2: exec of
> >>/tmp/clamav-base.config.47861 configure 0.86-1 failed at
> >>/usr/share/perl5/Debconf/ConfModule.pm line 44
> >>
> >>I can just guess that the temp file at the first error doesn't got the
> >>needed permissions. (that was hard to figure (-: )
> > 
> > 
> > Is /tmp mounted noexec?
> 
> Yes. I thought of that after I reported the bug.
> 
> I know not every user use it, but any change to have a fix which doesn't
> means mounting tmp without noexec?

No.  You can't mount the filesystem that scripts are going to be executed
in noexec, and expect to have it work.  There have been long discussions
about it, and the best recommendation I have heard so far is to remount
/tmp rw before installing a package or upgrading.  Since it's trivial to
work around a noexec /tmp anyway (think 'perl /tmp/rootme.pl'), it doesn't
seem to be worth the work to the debconf maintainers to work around it.
If you want to keep the bug open, I'll reassign it to debconf.  If you
feel that there are enough of these bugs already open on debconf, then
we can close it.  Just let me know.

Take care,
-- 
 -
|   ,''`.Stephen Gran |
|  : :' :[EMAIL PROTECTED] |
|  `. `'Debian user, admin, and developer |
|`- http://www.debian.org |
 -


signature.asc
Description: Digital signature

Bug#316330: clamav-base: cannot disable ScanArchive by debconf

[Stephen Gran]

This one time, at band camp, MATSUI Takahiro said:
> The default of "ScanArchive" option is "enabled", so only 
> removing "ScanArchive" from clamd.conf will not disable this 
> option and additional "DisableDefaultScanOptions" option may be 
> needed.

That is true.  The debconf stuff is not set up to handle extremely
complicated setups like that.  Fortunately, whenever 0.90 comes out, it
will start using boolean options, so debconf can put
ScanArchive 0

and this will work again.

thanks for reporting,
-- 
 -
|   ,''`.Stephen Gran |
|  : :' :[EMAIL PROTECTED] |
|  `. `'Debian user, admin, and developer |
|`- http://www.debian.org |
 -


signature.asc
Description: Digital signature

Bug#316401: clamav: DoS-vulnerability to CAN-2005-1922 and CAN-2005-1923 in Sarge and probably Etch

[Stephen Gran]

tags 316401 -woody
tags 316401 +sid
tags 316401 +security
clone 316401 -1
retitle 316401 libclamav: Infinite loop presents possibility of DoS
retitle -1 libclamav: file descriptor leak presents possibility for DoS
thanks
This one time, at band camp, Daniel Leidert said:
> iDefense discovered several vulnerabilities in ClamAV (< 0.86) allowing
> attackers to cause a Denial of Service condition.

Thanks for reporting this.  I am going to track them as two seperate
bugs, so that they can be handled seperately.

Clamav was never in woody, so I am removing that tag.  these bugs also
apply to versions in sid, so I tracking it there as well.

Take care.
-- 
 -
|   ,''`.Stephen Gran |
|  : :' :[EMAIL PROTECTED] |
|  `. `'Debian user, admin, and developer |
|`- http://www.debian.org |
 -


signature.asc
Description: Digital signature

Bug#295178: pbbuttonsd: pmcs-config still not found

[Michael Shields]

Package: pbbuttonsd
Version: 0.6.10-2
Followup-For: Bug #295178

Unfortunately this is not fixed in 0.6.10-2:

omelette:/etc/power# /etc/power/pmcs-pbbuttonsd resume ac
Laptop mode was already disabled, not disabling.
Laptop mode was already disabled, not disabling.
.: 15: pmcs-config: not found
run-parts: event.d/hdsetup exited with return code 2
Laptop mode was already disabled, not disabling.

/etc/power/event.d/hdsetup and event.d/bdflush redefine $PATH.
Removing these redefinitions causes them to work correctly.

-- System Information:
Debian Release: testing/unstable
  APT prefers testing
  APT policy: (500, 'testing'), (50, 'unstable')
Architecture: powerpc (ppc)
Shell:  /bin/sh linked to /bin/dash
Kernel: Linux 2.6.11-powerpc
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages pbbuttonsd depends on:
ii  eject  2.0.13deb-8sarge2 ejects CDs and operates CD-Changer
ii  hdparm 6.1-2 tune hard disk parameters for high
ii  libasound2 1.0.9-2   ALSA library
ii  libc6  2.3.2.ds1-22  GNU C Library: Shared libraries an
ii  makedev2.3.1-78  creates device files in /dev

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316281: proposed NMU patch

[Frank Lichtenheld]

On Thu, Jun 30, 2005 at 07:20:16PM -0700, Blars Blarson wrote:
> On Fri, Jul 01, 2005 at 03:27:23AM +0200, Frank Lichtenheld wrote:
> > On Thu, Jun 30, 2005 at 06:14:36PM -0700, Blars Blarson wrote:
> > > Attached is a patch to work around the changes to apt.  If this hasn't
> > > been fixed in 10 days I may upload it as an NMU.
> > 
> > IMHO the right fix would be to use --allow-unauthenticated instead
> > of --force-yes ...
> 
> It would be nice if there was such an option, but I see no hint of it
> in 'man apt-get' or 'apt-get --help'.
> 
> pbuilder needs to work with multiple releases, so if there was such a
> new option that did not work in woody, sarge, etch and sid it souldn't
> be used.  (or pbuilder could be comlicated to test for it...)

it works in sid already (and is documented in the man page there, too)
and will certainly in etch. But you are right
that it won't work for woody and sarge chroots. I still believe it would
be wrong to use --force-yes since that may override many valid errors
while --allow-unauthenticated will only override the one error we're
seeing. Perhaps we can detect wether we need the option, somehow?

Gruesse,
-- 
Frank Lichtenheld <[EMAIL PROTECTED]>
www: http://www.djpig.de/


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316207: needs repackaging for apt 0.6

[Cyril Brulebois]

Detlev Brodowski <[EMAIL PROTECTED]> (29/06/2005):
> Package: apt-move
> Version: 4.2.23
> Severity: important
> 
> -- System Information:
> Debian Release: testing/unstable
>   APT prefers unstable
>   APT policy: (500, 'unstable')
> Architecture: i386 (i686)
> Shell:  /bin/sh linked to /bin/bash
> Kernel: Linux 2.6.12.1-db-gx270
> Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
> 
> Hello,
> 
> please update the package-dependences (rebuild) for the new apt 0.6.

While repackaging, we've got many
"Compatibility levels before 3 are deprecated."

so a:
echo "4" > debian/compat
should be interesting. I'm not aware of packaging problems on other
platforms, but it might be ok on all of them.

Then this line in debian/rules:
$(MAKE) install DESTDIR=`pwd`/debian/tmp
isn't working anymore, please then consider this new one:
$(MAKE) install DESTDIR=$(CURDIR)/debian/apt-move

And the package can be created without any kind of warning.
(I didnt't tried with pbuilder since it's broken by now.)

Lintian reports: 
[EMAIL PROTECTED]:/chroot/build/apt-move-4.2.23$ lintian -i -I
../apt-move_4.2.23_i386.deb
E: apt-move: duplicate-conffile /etc/apt-move.conf
(+informations, which leads to the following solution)

Removing this file:
debian/conffiles
makes it lintian-clean.

Sorry if I'm that far away from the bug topic, but I thought that
repackaging should be done as soon and as clean as possible. Then I
suggest an all-in-one repackaging method.

-- 
Cyril Brulebois


signature.asc
Description: Digital signature

Bug#316281: proposed NMU patch

[Blars Blarson]

On Fri, Jul 01, 2005 at 03:27:23AM +0200, Frank Lichtenheld wrote:
> On Thu, Jun 30, 2005 at 06:14:36PM -0700, Blars Blarson wrote:
> > Attached is a patch to work around the changes to apt.  If this hasn't
> > been fixed in 10 days I may upload it as an NMU.
> 
> IMHO the right fix would be to use --allow-unauthenticated instead
> of --force-yes ...

It would be nice if there was such an option, but I see no hint of it
in 'man apt-get' or 'apt-get --help'.

pbuilder needs to work with multiple releases, so if there was such a
new option that did not work in woody, sarge, etch and sid it souldn't
be used.  (or pbuilder could be comlicated to test for it...)

-- 
Blars Blarson   [EMAIL PROTECTED]
http://www.blars.org/blars.html
With Microsoft, failure is not an option.  It is a standard feature.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#123918: the guests face

[Sam Christian]

Good Day,

I have been instructed by my head office to alert you to the fact that your 
file has been reviewed and there now are a few potential options for you to 
consider. 

Please note that this issue is time sensitive and that your previous credit 
situation is not an issue  at this time. 

Confirm your details on our secure form to ensure our records are accurate and 
we will be in touch within a few days via the method of your choice. 

http://www.lendxu-now.com/index.php?refid=windsor

--Sam Christian
Senior Financial Analyst - eLMR Inc.

Did this reach you in error? please let us know so you won't recieve again:
http://www.lendxu-now.com/r.php






-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316375: arch2darcs: darcs diff shows changes after import

[John Goerzen]

Hi everyone,

I got a strange report over at http://bugs.debian.org/316375 that I'm trying
to track down.  I'm not sure if this is a bug in darcs or tla, but I'm
leaning towards darcs as the culprit.   There seems to be a
non-deterministic difference in behavior of darcs diff on a repository
converted from arch to darcs using arch2darcs (which is nothing more
than a thin wrapper that invokes both tools via their respective
command-line interfaces).

Any help any of you could provide would be great.

Thanks,

-- John


On Thu, Jun 30, 2005 at 11:28:53PM +0200, Gintautas Miliauskas wrote:
> Hello,
> 
> > This is probably going to be a darcs bug.
> > 
> > I tried the conversion over your repository, using the instructions in
> > the arch2darcs README, and couldn't duplicate the problem.
> > 
> > What file did darcs diff have a patch for?
> > 
> > You might also possibly try darcs 1.0.3, in case it is in fact a darcs
> > bug.
> 
> I'm sorry, my bug report was indeed incomplete.  I'm now attaching the
> diff and a converted broken repository.
> 
> In fact now I think that the bug is not deterministic.  I checked out
> pyguitest using tla-1.3-1 (I actually tried bazaar too, didn't make a
> difference) into the directory `pyguitest` and then ran a script which
> copies the arch repository and converts it to darcs 10 times (the script
> is attached).  Both darcs 1.0.2 (Debian package) and 1.0.3 (compiled by
> self) exhibit the problem most of the time.
> 
> The results are attached -- as you can see, more than half the time
> there is a diff, but sometimes there isn't.  I have no idea why this is,
> especially given the quite deterministic Haskell programming model and
> that no parallel programming is involved (by the way, I added sleeps to
> make sure there were no race conditions involved in the script).
> 
> I'm sure you're better at figuring this out than me, I hope you can
> trace the problem or at least reproduce it.
> 
> -- 
> Gintautas Miliauskas
> http://gintasm.blogspot.com

> diff -rN -u old-guitest-darcs-broken/Makefile 
> new-guitest-darcs-broken/Makefile
> --- old-guitest-darcs-broken/Makefile 2005-06-21 20:48:29.0 +0200
> +++ new-guitest-darcs-broken/Makefile 2005-06-21 20:48:29.0 +0200
> @@ -1,5 +1,5 @@
>  test:
> - python test.py -w -v
> + python2.4 test.py -w
>  
>  clean:
>   find . -name '*.pyc' -exec rm -f {} \;
> 


> 1
> diff -rN -u old-pyguitest1/Makefile new-pyguitest1/Makefile
> --- old-pyguitest1/Makefile   2005-06-30 22:57:03.0 +0200
> +++ new-pyguitest1/Makefile   2005-06-30 22:57:03.0 +0200
> @@ -1,5 +1,5 @@
>  test:
> - python test.py -w -v
> + python2.4 test.py -w
>  
>  clean:
>   find . -name '*.pyc' -exec rm -f {} \;
> 
> 
> 2
> diff -rN -u old-pyguitest2/Makefile new-pyguitest2/Makefile
> --- old-pyguitest2/Makefile   2005-06-30 22:57:16.0 +0200
> +++ new-pyguitest2/Makefile   2005-06-30 22:57:16.0 +0200
> @@ -1,5 +1,5 @@
>  test:
> - python test.py -w -v
> + python2.4 test.py -w
>  
>  clean:
>   find . -name '*.pyc' -exec rm -f {} \;
> 
> 
> 3
> 
> 4
> diff -rN -u old-pyguitest4/Makefile new-pyguitest4/Makefile
> --- old-pyguitest4/Makefile   2005-06-30 22:57:41.0 +0200
> +++ new-pyguitest4/Makefile   2005-06-30 22:57:41.0 +0200
> @@ -1,5 +1,5 @@
>  test:
> - python test.py -w -v
> + python2.4 test.py -w
>  
>  clean:
>   find . -name '*.pyc' -exec rm -f {} \;
> 
> 
> 5
> diff -rN -u old-pyguitest5/Makefile new-pyguitest5/Makefile
> --- old-pyguitest5/Makefile   2005-06-30 22:57:54.0 +0200
> +++ new-pyguitest5/Makefile   2005-06-30 22:57:54.0 +0200
> @@ -1,5 +1,5 @@
>  test:
> - python test.py -w -v
> + python2.4 test.py -w
>  
>  clean:
>   find . -name '*.pyc' -exec rm -f {} \;
> 
> 
> 6
> 
> 7
> 
> 8
> 
> 9
> 
> 10
> diff -rN -u old-pyguitest10/Makefile new-pyguitest10/Makefile
> --- old-pyguitest10/Makefile  2005-06-30 22:59:00.0 +0200
> +++ new-pyguitest10/Makefile  2005-06-30 22:59:00.0 +0200
> @@ -1,5 +1,5 @@
>  test:
> - python test.py -w -v
> + python2.4 test.py -w
>  
>  clean:
>   find . -name '*.pyc' -exec rm -f {} \;
> 
> 


> 
> 1
> diff -rN -u old-tmp1/Makefile new-tmp1/Makefile
> --- old-tmp1/Makefile 2005-06-30 23:10:58.0 +0200
> +++ new-tmp1/Makefile 2005-06-30 23:10:58.0 +0200
> @@ -1,5 +1,5 @@
>  test:
> - python test.py -w -v
> + python2.4 test.py -w
>  
>  clean:
>   find . -name '*.pyc' -exec rm -f {} \;
> 
> 
> 2
> diff -rN -u old-tmp2/Makefile new-tmp2/Makefile
> --- old-tmp2/Makefile 2005-06-30 23:11:10.0 +0200
> +++ new-tmp2/Makefile 2005-06-30 23:11:10.0 +0200
> @@ -1,5 +1,5 @@
>  test:
> - python test.py -w -v
> + python2.4 test.py -w
>  
>  clean:
>   find . -name '*.pyc' -exec rm -f {} \;
> 
> 
> 3
> 
> 4
> diff -rN -u old-tmp4/Makefile new-tmp4/Makefile
> --- old-tmp4/Makef

Bug#138282: Fix your situation Elbert

[Johnnie Mckenzie]

THIS IS GOING TO BE OUR ABSOLUTE ATTEMPT

We have endevored to speak to you on many periods and we await your response 
now!

Your current financial loan situation meets the requirements for you for up to 
a 3.10% lower rate.

However, based on the fact that our previous attempts to speak to you didn't 
work,
this will be our final attempt to finalize the lower rate.

Please finalize this final step upon receiving this notice immediately,and 
complete your request for information now.

Submission Here:

http://www.tpbaj.com/i/LzMvaW5kZXgvYnZrL2NqOWtkOHd1Y3NhZQ==











brawl pgf absorptive mxe vietnamese lsx lawson yt deform qta influence ga 
withdrawn kn consternate pv sorrel gbm stannous hf tatty swp breach gyy 
temporal hee engineer yd 
http://tpbaj.com/rem.php


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316460: aptitude: should backup pkgstates

[Gustavo Noronha Silva]

Package: aptitude
Version: 0.3.2-4
Severity: normal

Hey,

I was bitten today by a crash while aptitude was saving its extended
state info. XFS happily filled pkgstates of binary crap instead of
its usual contents and then I now lost all the info about what packages
were automatically installed to fulfill depends (in which I highly
relied, btw).

A backup everytime pkgstate is being written, at least, would be very
useful and wise IMO =).

Thanks!

-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.8-2-686
Locale: LANG=pt_BR.UTF-8, LC_CTYPE=pt_BR.UTF-8 (charmap=UTF-8)

Versions of packages aptitude depends on:
ii  apt [libapt-pkg-libc6.3-5-3 0.6.38   Advanced front-end for dpkg
ii  libc6   2.3.2.ds1-22 GNU C Library: Shared libraries an
ii  libgcc1 1:4.0.0-11   GCC support library
ii  libncurses5 5.4-8Shared libraries for terminal hand
ii  libsigc++-2.0-0 2.0.10-1 type-safe Signal Framework for C++
ii  libstdc++5  1:3.3.6-7The GNU Standard C++ Library v3

Versions of packages aptitude recommends:
pn  aptitude-doc-en | aptitude-do  (no description available)

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316461: debmirror uses find args in wrong order. patch provided.

[Craig Sanders]

Package: debmirror
Version: 20050207

the following warning message shows up when running debmirror:

find: warning: you have specified the -depth option after a non-option
argument -type, but options are not positional (-depth affects tests specified
before it as well as those specified after it).  Please specify options before
other arguments.




--- debmirror.orig  2005-07-01 11:42:12.616120128 +1000
+++ debmirror   2005-07-01 11:42:45.348144104 +1000
@@ -929,7 +929,7 @@
   # makes directories.. Sort so they are removable in bottom-up
   # order.
   chdir($mirrordir) or die "chdir $mirrordir: $!";
-  system("find . -type d -depth ! -name . ! -name .. -print0 | xargs -0 rmdir 
2>/dev/null") if (! $dry_run);
+  system("find . -depth -type d ! -name . ! -name .. -print0 | xargs -0 rmdir 
2>/dev/null") if (! $dry_run);
 }
 
 exit;



-- 
craig sanders <[EMAIL PROTECTED]>   (part time cyborg)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316281: proposed NMU patch

[Frank Lichtenheld]

On Thu, Jun 30, 2005 at 06:14:36PM -0700, Blars Blarson wrote:
> Attached is a patch to work around the changes to apt.  If this hasn't
> been fixed in 10 days I may upload it as an NMU.

IMHO the right fix would be to use --allow-unauthenticated instead
of --force-yes ...

Gruesse,
-- 
Frank Lichtenheld <[EMAIL PROTECTED]>
www: http://www.djpig.de/


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316459: groff: in LANG=ja_JP.eucJP env., hyphenation character \% does not prevent hyphenation

[Michael Smith]

Package: groff
Version: 1.18.1.1-8
Severity: important
Tags: l10n

Greetings from Tokyo.

Bad news: Handling of \% in LANG=ja_JP.eucJP environments is borked.

In a LANG=C environment, a word preceded by a \% character does
not get hyphenated under any circumstances. That is good. It is
the expected behavior.

But n a LANG=ja_JP.eucJP environment, if a word preceded by a
hyphen ends up falling at the end of a line in rendered output, it
may unexpectedly get hyphenated. That is bad.

The groff info docs make it clear that \% prevents hyphenation:

  To tell `gtroff' how to hyphenate words on the fly, use the `\%'
  escape, also known as the "hyphenation character".  Preceding a
  word with this character prevents it from being hyphenated [...]

Here is a minimal document that can be used to see the problem:

  .TH "EXAMPLE" 7 "2007\-09\-04" "Version 1" "Controlling hyphenation"
  .\" 
  .SH "NAME"
  .\" 
  example \- show some problem with preventing hyphenation 
  .\" 
  .SH "DESCRIPTION"
  .\" 
  .PP
  Values for the \%version, \%recovery, \%debugging, \%timing,
  \%output, \%repeat, \%compression, \%insert, \%formatting,
  \%encodings, \%catalogs, \%automation, \%register, \%validate
  options may be set in the configuration file as well as via the
  command line.

Regards,

  --Michael Smith

-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (990, 'testing'), (70, 'unstable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.7
Locale: LANG=ja_JP.eucJP, LC_CTYPE=ja_JP.eucJP (charmap=EUC-JP)

Versions of packages groff depends on:
ii  groff-base   1.18.1.1-8  GNU troff text-formatting system (
ii  libc62.3.2.ds1-22GNU C Library: Shared libraries an
ii  libgcc1  1:4.0.0-9   GCC support library
ii  libice6  4.3.0.dfsg.1-14 Inter-Client Exchange library
ii  libsm6   4.3.0.dfsg.1-14 X Window System Session Management
ii  libstdc++5   1:3.3.5-13  The GNU Standard C++ Library v3
ii  libx11-6 4.3.0.dfsg.1-14 X Window System protocol client li
ii  libxaw7  4.3.0.dfsg.1-14 X Athena widget set library
ii  libxext6 4.3.0.dfsg.1-14 X Window System miscellaneous exte
ii  libxmu6  4.3.0.dfsg.1-14 X Window System miscellaneous util
ii  libxpm4  4.3.0.dfsg.1-14 X pixmap library
ii  libxt6   4.3.0.dfsg.1-14 X Toolkit Intrinsics
ii  xlibs4.3.0.dfsg.1-14 X Keyboard Extension (XKB) configu

-- debconf information:
* groff/package-split:


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316458: smb.conf man page references non-existent BROWSING.txt file

[Marvin Renich]

Package: samba-common
Version: 3.0.14a-3
Severity: minor

The man page for smb.conf refers to BROWSING.txt in the description of
"os level".  I could not find this file anywhere, though I seem to
remember reading it several years ago.  Perhaps the documentation has
been reorganized, but this reference has not been updated?

...Marvin


-- System Information:
Debian Release: 3.1
Architecture: i386 (i586)
Kernel: Linux 2.4.18
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages samba-common depends on:
ii  debconf 1.4.30.13Debian configuration management sy
ii  libc6   2.3.2.ds1-22 GNU C Library: Shared libraries an
ii  libcomerr2  1.37-2sarge1 common error description library
ii  libkrb531.3.6-2  MIT Kerberos runtime libraries
ii  libldap22.1.30-8 OpenLDAP libraries
ii  libpam-modules  0.76-22  Pluggable Authentication Modules f
ii  libpopt01.7-5lib for parsing cmdline parameters

-- debconf information excluded


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#117255: attempt was made

[Tony Feliciano]

Good Day,

I have been instructed by my head office to alert you to the fact that your 
file has been reviewed and there now are a few potential options for you to 
consider. 

Please note that this issue is time sensitive and that your previous credit 
situation is not an issue  at this time. 

Confirm your details on our secure form to ensure our records are accurate and 
we will be in touch within a few days via the method of your choice. 

http://www.lendxu-now.com/index.php?refid=windsor

--Tony Feliciano
Senior Financial Analyst - eLMR Inc.

Did this reach you in error? please let us know so you won't recieve again:
http://www.lendxu-now.com/r.php






-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#116507: and in penza

[Anthony Carroll]

Good Day,

I have been instructed by my head office to alert you to the fact that your 
file has been reviewed and there now are a few potential options for you to 
consider. 

Please note that this issue is time sensitive and that your previous credit 
situation is not an issue  at this time. 

Confirm your details on our secure form to ensure our records are accurate and 
we will be in touch within a few days via the method of your choice. 

http://www.lendxu-now.net/index.php?refid=windsor

--Anthony Carroll
Senior Financial Analyst - eLMR Inc.

Did this reach you in error? please let us know so you won't recieve again:
http://www.lendxu-now.net/r.php






-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316281: proposed NMU patch

[Blars Blarson]

package pbuilder
tags 316281 + patch
thanks

Attached is a patch to work around the changes to apt.  If this hasn't
been fixed in 10 days I may upload it as an NMU.

-- 
Blars Blarson   [EMAIL PROTECTED]
http://www.blars.org/blars.html
With Microsoft, failure is not an option.  It is a standard feature.
diff -u -r ../src3/pbuilder-0.127/ChangeLog pbuilder-0.127/ChangeLog
--- ../src3/pbuilder-0.127/ChangeLog2005-04-21 15:37:05.0 -0700
+++ pbuilder-0.127/ChangeLog2005-06-30 17:44:54.0 -0700
@@ -1,3 +1,8 @@
+2005-06-30  Blars Blarson <[EMAIL PROTECTED]>
+
+   * add --force-yes to all uses of apt-get -y to allow it to work
+ with new version of apt.
+   
 2005-04-22  Junichi Uekawa  <[EMAIL PROTECTED]>
 
* pbuilder-buildpackage: call save_aptcache after running final B hook
diff -u -r ../src3/pbuilder-0.127/debian/changelog 
pbuilder-0.127/debian/changelog
--- ../src3/pbuilder-0.127/debian/changelog 2005-04-21 15:38:16.0 
-0700
+++ pbuilder-0.127/debian/changelog 2005-06-30 17:47:33.0 -0700
@@ -1,3 +1,11 @@
+pbuilder (0.127-0.1) unstable; urgency=low
+
+  * NMU to fix RC bug  
+  * add --force-yes to all apt-get -y calls to make it work with
+new version of apt.
+  
+ -- Blars Blarson <[EMAIL PROTECTED]>  Thu, 30 Jun 2005 17:44:59 -0700
+
 pbuilder (0.127) unstable; urgency=low
 
   * pdebuild.1, pdebuild-user-mode-linux.1: --debsign-k requires key-id.
diff -u -r ../src3/pbuilder-0.127/pbuilder-createbuildenv 
pbuilder-0.127/pbuilder-createbuildenv
--- ../src3/pbuilder-0.127/pbuilder-createbuildenv  2004-12-01 
15:41:32.0 -0800
+++ pbuilder-0.127/pbuilder-createbuildenv  2005-06-30 17:38:06.0 
-0700
@@ -76,8 +76,8 @@
 $CHROOTEXEC /usr/bin/dpkg --purge $REMOVEPACKAGES
 fi
 recover_aptcache
-$CHROOTEXEC /usr/bin/apt-get -y dist-upgrade
-$CHROOTEXEC /usr/bin/apt-get -y install build-essential dpkg-dev apt 
$EXTRAPACKAGES
+$CHROOTEXEC /usr/bin/apt-get -y --force-yes dist-upgrade
+$CHROOTEXEC /usr/bin/apt-get -y --force-yes install build-essential dpkg-dev 
apt $EXTRAPACKAGES
 save_aptcache
 $CHROOTEXEC /usr/bin/apt-get clean
 
diff -u -r ../src3/pbuilder-0.127/pbuilder-satisfydepends 
pbuilder-0.127/pbuilder-satisfydepends
--- ../src3/pbuilder-0.127/pbuilder-satisfydepends  2003-04-19 
20:40:36.0 -0700
+++ pbuilder-0.127/pbuilder-satisfydepends  2005-06-30 17:38:59.0 
-0700
@@ -147,10 +147,10 @@
 
 # now actually install the packages
 echo " -> Installing ${INSTALLPKGLIST}"
-if ! $CHROOTEXEC apt-get -y install ${INSTALLPKGLIST}; then
+if ! $CHROOTEXEC apt-get -y --force-yes install ${INSTALLPKGLIST}; then
echo " -> Trying to fix apt error"
# Work around an apt bug which causes configure to fail.
-   if $CHROOTEXEC dpkg --configure --pending && $CHROOTEXEC apt-get -y 
install ${INSTALLPKGLIST}; then
+   if $CHROOTEXEC dpkg --configure --pending && $CHROOTEXEC apt-get -y 
--force-yes install ${INSTALLPKGLIST}; then
echo " -> Apt bug workaround succeeded"
elif [ "$CONTINUE_FAIL" != "yes" ]; then
echo "E: Unrecoverable error installing build-dependencies." >&2
@@ -191,7 +191,7 @@
 
   # if package exists, remove it.
   if $CHROOTEXEC /usr/bin/dpkg -s $(echo "$INSTALLPKG" | tr "/" " " | awk 
'{print $1}') 2>&1 | grep ^Package: > /dev/null; then
- if ! $CHROOTEXEC /usr/bin/apt-get -y remove ${CURRENTREALPKGNAME} ; 
then
+ if ! $CHROOTEXEC /usr/bin/apt-get -y --force-yes remove 
${CURRENTREALPKGNAME} ; then
  echo "E: Could not satisfy build-conflicts" >&2
  exit 1
  fi
diff -u -r ../src3/pbuilder-0.127/pbuilder-updatebuildenv 
pbuilder-0.127/pbuilder-updatebuildenv
--- ../src3/pbuilder-0.127/pbuilder-updatebuildenv  2004-06-16 
17:19:59.0 -0700
+++ pbuilder-0.127/pbuilder-updatebuildenv  2005-06-30 17:40:35.0 
-0700
@@ -44,8 +44,8 @@
 recover_aptcache
 
 $TRAP saveaptcache_umountproc_cleanbuildplace exit
-$CHROOTEXEC /usr/bin/apt-get -y "[EMAIL PROTECTED]" dist-upgrade 
-$CHROOTEXEC /usr/bin/apt-get -y install build-essential dpkg-dev apt 
$EXTRAPACKAGES
+$CHROOTEXEC /usr/bin/apt-get -y --force-yes "[EMAIL PROTECTED]" dist-upgrade 
+$CHROOTEXEC /usr/bin/apt-get -y --force-yes install build-essential dpkg-dev 
apt $EXTRAPACKAGES
 save_aptcache
 $TRAP umountproc_cleanbuildplace exit
 $CHROOTEXEC /usr/bin/apt-get clean || true
diff -u -r ../src3/pbuilder-0.127/pdebuild-internal 
pbuilder-0.127/pdebuild-internal
--- ../src3/pbuilder-0.127/pdebuild-internal2005-01-03 17:47:18.0 
-0800
+++ pbuilder-0.127/pdebuild-internal2005-06-30 17:42:33.0 -0700
@@ -29,7 +29,7 @@
 echo "Using: $Id: pdebuild-internal,v 1.4 2005/01/04 01:47:18 dancer Exp $"
 
 # I am probably running as root; make sure I have pbuilder installed here.
-apt-get install -y pbuilder 
+apt-get install -y --force-y

Bug#313110: Specific?

[David Moreno Garza]

Hello and thanks for your bug report.

Can you please specify exactly where do you mean it has to be corrected?

Do you mean this question:
http://www.debian.org/CD/faq/#dvd ?

If so, well, somebody else made the proper changes and did not close the
bug, or you mean other specific section.

--
David Moreno Garza <[EMAIL PROTECTED]> | http://www.damog.net/
 Luchemos por un mundo sin violencia. 
 GPG: C671257D - 6EF6 C284 C95D 78F6 0B78 FFD3 981C 5FD7 C671 257D



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316457: w3m-el: package description include shimbun etc

[Kevin Ryde]

Package: w3m-el
Version: 1.4.4-1
Severity: wishlist

It'd be nice if the package description mentioned shimbun, I didn't
know w3m-el was more than just w3m within emacs, until I started
nosing around.

Maybe a few of the other extra features could be mentioned too, like
the weather and perldoc lookups.

-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i586)
Shell:  /bin/sh linked to /bin/dash
Kernel: Linux 2.6.10-1-386
Locale: LANG=C, LC_CTYPE=C (charmap=ISO-8859-1) (ignored: LC_ALL set to en_AU)

Versions of packages w3m-el depends on:
ii  apel   10.6+0.20050606-1 portable library for emacsen
ii  emacs2121.4a-1   The GNU Emacs editor
ii  w3m0.5.1-3   WWW browsable pager with excellent

Versions of packages w3m-el recommends:
ii  apel   10.6+0.20050606-1 portable library for emacsen
ii  flim   1:1.14.7+0.20041120-1 library about internet message for
ii  imagemagick6:6.2.3.1-1   Image manipulation programs
pn  mule-ucs   (no description available)
pn  ppthtml(no description available)
pn  wv (no description available)
ii  xlhtml 0.5.1-3   A program for converting Microsoft

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#315264: [bug #13592] All windows of GNUstep applications share same WM_CLASS

[Adam Fedor]

URL:
  

 Summary: All windows of GNUstep applications share same
WM_CLASS
 Project: GNUstep
Submitted by: fedor
Submitted on: Fri 07/01/2005 at 00:48
Category: Backend
Severity: 3 - Normal
  Item Group: Change Request
  Status: None
 Privacy: Public
 Assigned to: None
 Open/Closed: Open

___

Details:

Package: gnustep-gui
Version: 0.9.5-1
Tags: forwarded

[If you reply, please keep the CC to [EMAIL PROTECTED]

All windows of the GNUstep applications share the same WM_CLASS 
property.  This includes even the menu and makes impossible for the user 
to configure properly the window manager.  If the user decides to make 
the menu not a member in the window list then all application windows 
will be outside the window list.  If a user decides to make the 
Inspector of GWorkspace a floating (to stay always over the other 
windows) then all windows of GWorkspace will be floating.

Anton Zinoviev




___

Carbon-Copy List:

CC Address  | Comment
+-
[EMAIL PROTECTED]  | 




___

Reply to this item at:

  

___
  Message sent via/by Savannah
  http://savannah.gnu.org/



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#315277: [bug #13593] The windows are drawed slowly on remote displays

[Adam Fedor]

URL:
  

 Summary: The windows are drawed slowly on remote displays
 Project: GNUstep
Submitted by: fedor
Submitted on: Fri 07/01/2005 at 00:49
Category: Application
Severity: 3 - Normal
  Item Group: Bug
  Status: None
 Privacy: Public
 Assigned to: None
 Open/Closed: Open

___

Details:

Package: libgnustep-gui0.9
Version: 0.9.5-1
Tags: forwarded

[If you reply, please keep the CC to [EMAIL PROTECTED]

When I tried to use the GNUstep application remotely on a diskless X
terminal I noticed that the contents of the windows is drawed very
slowly - pixel by pixel, row by row, so that the whole process of
drawing is clearly visible.  The non-GNUstep windows draw fast.

If I try to select a few files in the Viewer (in Icon mode) by enclosing 
them in a rectangle (with the mouse) the rectangle resizes unacceptably 
slow.  Notice that the rectangle in the root window of Window Maker 
draws very fast.




___

Carbon-Copy List:

CC Address  | Comment
+-
[EMAIL PROTECTED]  | 




___

Reply to this item at:

  

___
  Message sent via/by Savannah
  http://savannah.gnu.org/



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316281: also happens installing build-dependancies

[Blars Blarson]

package pbuilder
tags 316281 sid
severity 316281 grave
thanks

This same problem happens when pbuilder tries to install build
dependacies to build a package.  pbuilder can no longer be used to
build packages in sid, thus making it (almost completely)
nonfuctional.


-- 
Blars Blarson   [EMAIL PROTECTED]
http://www.blars.org/blars.html
With Microsoft, failure is not an option.  It is a standard feature.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#129459: Online computer solutions.

[Andrew]

Learn to build simple and clean websites that can bring in the dough...
http://dfylw.lsp0o23w0vls043.mitigatorji.com




To be worn out is to be renewed. 
Three can keep a secret, if two of them are dead.  





--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#220786: xmms: ALSA does not support master volume control instead of PCM

[Takeshi Hakamata]

With xmms 1.2.10+cvs20050209-2 on a sid box, I can properly configure 
the ALSA output plugin to use the master volume as the mixer device for 
xmms.  You have to restart xmms to take the change into effect, but 
that's another issue if it's not acceptable.  I think this bug can be 
closed.


Takeshi


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#282492: iproute: removing modules, ifup down up down kill ip _eventually_ succeeds

[Luke Kenneth Casson Leighton]

Package: iproute
Version: 20041019-3
Severity: normal
Followup-For: Bug #282492


one million and increasing attempts to flush eth0.

this is what i am using (in combination with fwbuilder) to attempt
to get round of the problem.  it is not successful always but can be
eventually successful after killing /sbin/ip and re-running the script,
repeat until success.

#!/bin/sh

iptables -F
iptables -X
ifdown eth0
ifdown eth1

rmmod ip6table_filter
rmmod ip6_tables
rmmod ipt_LOG
rmmod ipt_state
rmmod ip_nat_tftp
rmmod ip_nat_snmp_basic
rmmod ip_nat_irc
rmmod ip_nat_ftp
rmmod ip_nat_amanda
rmmod iptable_nat
rmmod ip_conntrack_tftp
rmmod ip_conntrack_proto_sctp
rmmod ip_conntrack_irc
rmmod ip_conntrack_ftp
rmmod ip_conntrack_amanda
rmmod ip_conntrack
rmmod iptable_filter
rmmod ipt_REDIRECT

sleep 1
rmmod tulip
rmmod 3c59x
modprobe tulip
modprobe 3c59x
sleep 1
ifup eth0
ifup eth1
ip -4 neigh flush dev eth0
ip -4 neigh flush dev eth1
sleep 1
ifdown eth0
ifdown eth1
sleep 1
ifup eth0
ifup eth1

sh /etc/fwbuilder.script.fw


-- System Information:
Debian Release: testing/unstable
Architecture: i386
Kernel: Linux highfield 2.6.11-1-686 #1 Fri May 20 07:34:54 UTC 2005 i686
Locale: LANG=C, LC_CTYPE=C

Versions of packages iproute depends on:
ii  libatm1 2.4.1-16 shared library for ATM (Asynchrono
ii  libc6   2.3.2.ds1-21 GNU C Library: Shared libraries an

-- no debconf information



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#79037: Full version of the software.

[Charles]

Enabling the digital future.
http://gohto.rgv6uq926jrg6a9.pearlylj.net




A moment's insight is sometimes worth a life's experience.
The squeaking wheel doesn't always get the grease. Sometimes it gets replaced. 





--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#80878: Any software backups for lowest pricest.

[Alexander]

All the Software You'll Ever Need To Successfully Make Money Online!
http://mwjj.rgv6u8r2619yos9.defeasemc.com




What you risk reveals what you value.  
You cannot keep a man down without staying down with him.  





--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#92845: Microsoft and IBM OEM Software for Bundling Only and other related software.

[Dannie]

Get the Software you need, now!
http://stq.e30bzvwpb6e3bxw.mitigatorji.com




Perfection is the enemy of the good.  
If your ship doesn't come in, swim out to it!   





--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#312721: Comments

[Kai Hendry]

Stepan I just applied your patch to 1.5.1.3-2 here:

http://hendry.iki.fi/debian/wordpress/

Could you test it?

About the setup-mysql script. It's a bit hairy and it is not very
clever. 

Matt, how did you want your blog to show up on the net? As a domain? Or
something off a domain, like example.com/blog?  The latter cases don't
work with the script currently. Hopefully I will fix it soon.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#310590: Notes On Building Aspell Dictionaries

[Kevin Atkinson]

On Fri, 1 Jul 2005, Agustin Martin wrote:

> > > I think we
> > > should also encourage affix compression when possible, hash sizes are much
> > > better.
> >
> > If the language in question does not have does not have any sort of
> > soundslike data, than affix compression is a clear win;  however, if
> > the language uses phonetic soundslike data (such as German, French, and
> > most importunately English) than the choice to enable affix compression
> > in the compiled hash table is much more difficult.  Aspell will support
> > both affix compression and phonetic soundslike lookup but the results may
> > not be as good.  Thus I, in general, don't recommend it.  You should use
> > the settings in the official dictionary package.
>
> This seems something to be decided in a per dict basis and delegated on dict
> maintainers.

Yes that is why I suggest you use the settings in the official
Aspell dictionary package.  If the Debian dictionary maintainer thinks
otherwise I would appreciate an email to that effect.

> > > You may also consider using "--validate-words" but those checks are
> > > not very expensive.
>
> > That should be "--dont-validate-words".
>
> Thanks,
>
> I only added "--dont-validate-affixes", I tested only gl-minimos and ca,
> and catalan dict has some useless flags. Piping through
> "aspell clean strict" gave me a lot of errors on the
> 'point in the middle char' that is used in catalan as part of words,
> and I think that I had errors even on flag slashes in the affix
> compressed ispell wordlist.

You need to be sure to specify the correct language ie "aspell clean
strict -l " the set of warnings should be the same as when compiling
the word list, if not you did something wrong.  If the language data file
is not installed in the expected location you might need to add
"--local-data-dir=".



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316454: fetchmail: Puts "localhost" into Received header instead of hostname

[Roger Lynn]

Package: fetchmail
Version: 6.2.5-12
Severity: normal

When adding a Received: header to a message, Fetchmail puts "localhost" 
instead of the name of the host Fetchmail is running on. This tells you 
nothing about where the message has been received, which is the point of 
the header, and is misleading and unhelpful. If every mail server did 
this following email headers would be much harder.

For example:

Received: from pop3.demon.co.uk
by localhost with POP3 (fetchmail-6.2.5)
for [EMAIL PROTECTED] (multi-drop); Thu, 30 Jun 2005 00:14:08 ++0100 
(BST)

Fetchmail is running on rilynn.demon.co.uk, and should say so.

There is a similar problem with delivery status messages produced by 
Fetchmail. The messages contain the line:

Reporting-MTA: dns; localhost

which is fairly pointless and unhelpful, especially as exim gives the 
name of the host thinks it is running on during the SMTP session:

reading message [EMAIL PROTECTED]:1 of 1 (1683 octets)
fetchmail: passed through [EMAIL PROTECTED] matching rilynn.demon.co.uk
fetchmail: SMTP< 220 rilynn.demon.co.uk ESMTP Exim 4.50 Thu, 30 Jun 2005 
23:36:27 +0100
fetchmail: SMTP> EHLO localhost
fetchmail: SMTP< 250-rilynn.demon.co.uk Hello localhost [127.0.0.1]
fetchmail: SMTP< 250-SIZE 52428800
fetchmail: SMTP< 250-PIPELINING
fetchmail: SMTP< 250 HELP
fetchmail: forwarding to localhost

fetchmailrc:

set daemon 60
set postmaster "postmaster"
poll pop3.demon.co.uk aka mailstore protocol SDPS interface eth0/192.168.0.1
options localdomains rilynn.demon.co.uk no dns no envelope
user rilynn password foo to *
options fetchall no rewrite warnings 86400

Thanks,

Roger

-- System Information:
Debian Release: 3.1
Architecture: i386 (i686)
Kernel: Linux 2.6.8-2-686
Locale: LANG=en_GB, LC_CTYPE=en_GB (charmap=ISO-8859-1)

Versions of packages fetchmail depends on:
ii  adduser 3.63 Add and remove users and groups
ii  base-files  3.1.2Debian base system miscellaneous f
ii  debconf 1.4.30.13Debian configuration management sy
ii  debianutils 2.8.4Miscellaneous utilities specific t
ii  libc6   2.3.2.ds1-22 GNU C Library: Shared libraries an
ii  libssl0.9.7 0.9.7e-3 SSL shared libraries

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316453: kernel-image-2.6.11-amd64-generic: Fails to boot since 2.6.11-4

[Pascal Giard]

Package: kernel-image-2.6.11-amd64-generic
Version: 2.6.11-4
Severity: critical
Justification: breaks the whole system

Since 2.6.11-4, the kernel-image won't boot.

The first error message says something like:
" Can't load shared object file libc.so.6 "
The second error message says it can't find sda1.

My hypothesis is that the necessary modules for my onboard SATA
controller are no longer included in the initrd image.

I HAVEN'T modified /etc/mkinitrd/mkinitrd.conf.

I've a pretty common Asus K8V-X motherboard which SATA ctrler
requires at least scsi_mod, sata_via and libata to work.

Booting with the current kernel-image-2.6.8-amd64-generic image works fine.
I'm happy i kept my very old image before upgrading 2.6.11!!

-Pascal
-- System Information:
Debian Release: testing/unstable
 APT prefers unstable
 APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.8-11-amd64-generic
Locale: LANG=fr_CA, LC_CTYPE=fr_CA (charmap=ISO-8859-1)



--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316455: kernel-source-2.6.11: Fails to boot since 2.6.11-4

[Pascal Giard]

Package: kernel-source-2.6.11-amd64-generic
Version: 2.6.11-4
Severity: critical
Justification: breaks the whole system

(Sorry if this is a dupe, i had filled it against 
kernel-image-2.6.11-amd64-generic).


Since kernel-image-2.6.11-amd64-generic 2.6.11-4, the kernel-image won't 
boot.


The first error message says something like:
" Can't load shared object file libc.so.6 "
The second error message says it can't find sda1.

My hypothesis is that the necessary modules for my onboard SATA
controller are no longer included in the initrd image.

I HAVEN'T modified /etc/mkinitrd/mkinitrd.conf.

I've a pretty common Asus K8V-X motherboard which SATA ctrler
requires at least scsi_mod, sata_via and libata to work.

Booting with the current kernel-image-2.6.8-amd64-generic image works fine.
I'm happy i kept my very old image before upgrading 2.6.11!!

-Pascal
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.8-11-amd64-generic
Locale: LANG=fr_CA, LC_CTYPE=fr_CA (charmap=ISO-8859-1)


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316456: gnumeric: SVG export for chart does not retain series patterns

[Jeffery von Ronne]

Package: gnumeric
Version: 1.5.2-1
Severity: normal


When I export an SVG of chart (using the "Save Image As" option in the
context menu), the resulting SVG does not retain the "pattern" of any
of the bars or in the legend.  (Or if it does, it is ignored by both
karbon and inkscape.  I can't tell from the SVG file itself.)  This 
makes it very difficult to get a high-quality black & white chart that I
can include in a latex paper.

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (50, 'unstable')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.12-rc3-pattertwig
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages gnumeric depends on:
ii  gconf22.10.0-2   GNOME configuration database syste
ii  gnumeric-common   1.5.2-1common files for Gnumeric, the GNO
ii  gsfonts   8.14+v8.11+urw-0.2 Fonts for the Ghostscript interpre
ii  libart-2.0-2  2.3.17-1   Library of functions for 2D graphi
ii  libatk1.0-0   1.10.1-2   The ATK accessibility toolkit
ii  libbonobo2-0  2.8.1-2Bonobo CORBA interfaces library
ii  libbonoboui2-02.8.1-2The Bonobo UI library
ii  libc6 2.3.2.ds1-22   GNU C Library: Shared libraries an
ii  libgconf2-4   2.10.0-2   GNOME configuration database syste
ii  libglade2-0   1:2.5.1-2  library to load .glade files at ru
ii  libglib2.0-0  2.6.4-1The GLib library of C routines
ii  libgnome2-0   2.10.0-3   The GNOME 2 library - runtime file
ii  libgnomecanvas2-0 2.10.2-2   A powerful object-oriented display
ii  libgnomeprint2.2-02.10.3-2   The GNOME 2.2 print architecture -
ii  libgnomeprintui2.2-0  2.10.2-2   GNOME 2.2 print architecture User 
ii  libgnomeui-0  2.10.0-2   The GNOME 2 libraries (User Interf
ii  libgnomevfs2-02.10.1-5   The GNOME virtual file-system libr
ii  libgoffice-1  0.0.2-1Document centric objects library -
ii  libgsf-1  1.12.1-1   Structured File Library - runtime 
ii  libgsf-gnome-11.12.1-1   Structured File Library - runtime 
ii  libgtk2.0-0   2.6.4-3The GTK+ graphical user interface 
ii  libice6   4.3.0.dfsg.1-14Inter-Client Exchange library
ii  liborbit2 1:2.12.2-1 libraries for ORBit2 - a CORBA ORB
ii  libpango1.0-0 1.8.1-1Layout and rendering of internatio
ii  libpopt0  1.7-5  lib for parsing cmdline parameters
ii  libsm64.3.0.dfsg.1-14X Window System Session Management
ii  libxml2   2.6.16-7   GNOME XML library
ii  xlibs 4.3.0.dfsg.1-14X Keyboard Extension (XKB) configu
ii  zlib1g1:1.2.2-4  compression library - runtime

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316452: openoffice bash completion doesn't deal with directories or .csv files

[Liam O'Boyle]

Package: openoffice.org-debian-files
Version: 1.1.4-3+1

The bash completion functions listed
in /etc/bash_completion.d/openoffice do not correctly deal with
directories or .csv files.  Directories and files with a .csv extension
are not listed as possible completions.

Bash version: 3.0-16

Solution: see diff file attached.  Summary below
 - use option "-o dirnames" with the complete function call
 - add .csv to oocalc and openoffice extensions

Cheers,
Liam
--- /etc/bash_completion.d/openoffice	2005-06-08 08:48:21.0 +1200
+++ /etc/bash_completion.d/openoffice.new	2005-07-01 11:41:46.0 +1200
@@ -105,6 +105,7 @@
 compgen -G "${cur}*.stw"
 compgen -G "${cur}*.txt"
 compgen -G "${cur}*.vor"
+compgen -G "${cur}*.csv"
 compgen -W "$options" | grep "^$cur"
 			) )
 		;;
@@ -113,7 +114,7 @@
 	return 0
 
 }
-complete -F _openoffice -o filenames openoffice
+complete -F _openoffice -o filenames -o dirnames openoffice
 
 _oodraw() {
 	local prev options
@@ -166,7 +167,7 @@
 	return 0
 
 }
-complete -F _oodraw -o filenames oodraw
+complete -F _oodraw -o filenames -o dirnames oodraw
 
 _ooimpress() {
 	local prev options
@@ -197,7 +198,7 @@
 	return 0
 
 }
-complete -F _ooimpress -o filenames ooimpress
+complete -F _ooimpress -o filenames -o dirnames ooimpress
 
 _oofromtemplate() {
 	local prev options
@@ -226,7 +227,7 @@
 	return 0
 
 }
-complete -F _oofromtemplate -o filenames oofromtemplate
+complete -F _oofromtemplate -o filenames -o dirnames oofromtemplate
 
 _oomath() {
 	local prev options
@@ -249,7 +250,7 @@
 	return 0
 
 }
-complete -F _oomath -o filenames oomath
+complete -F _oomath -o filenames -o dirnames oomath
 
 _oomaster() {
 	local prev options
@@ -272,7 +273,7 @@
 	return 0
 
 }
-complete -F _oomaster -o filenames oomaster
+complete -F _oomaster -o filenames -o dirnames oomaster
 
 _oowriter() {
 	local prev options
@@ -304,7 +305,7 @@
 	return 0
 
 }
-complete -F _oowriter -o filenames oowriter
+complete -F _oowriter -o filenames -o dirnames oowriter
 
 _ooweb() {
 	local prev options
@@ -329,7 +330,7 @@
 	return 0
 
 }
-complete -F _ooweb -o filenames ooweb
+complete -F _ooweb -o filenames -o dirnames ooweb
 
 _oocalc() {
 	local prev options
@@ -359,6 +360,7 @@
 compgen -G "${cur}*.wks"
 compgen -G "${cur}*.123"
 compgen -G "${cur}*.xml"
+compgen -G "${cur}*.csv"
 compgen -G "${cur}*.wb?"
 compgen -W "$options" | grep "^$cur"
 			) )
@@ -368,5 +370,5 @@
 	return 0
 
 }
-complete -F _oocalc -o filenames oocalc
+complete -F _oocalc -o filenames -o dirnames oocalc
 


signature.asc
Description: This is a digitally signed message part

Bug#315294: after deleting MemoDB, plucker doesn't save URLs or export

[Dan Jacobson]

L> Bad side effect.
OK, better document all this, else like me somebody will add lots of
new items only to find they weren't added.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#310590: Notes On Building Aspell Dictionaries

[Agustin Martin]

On Thu, Jun 30, 2005 at 11:27:48AM -0600, Kevin Atkinson wrote:
> > I assume this applies only to non affix compressed wordlists. 
> 
> No it also helps with affix compressed word lists.

Fine, I added today support for *.cwl.gz files to our aspell-autobuildhash
branch. This should work for prezip+gzip affix compressed wordlists as
long as they have that extension.

> 
> > I think we
> > should also encourage affix compression when possible, hash sizes are much
> > better.
> 
> If the language in question does not have does not have any sort of 
> soundslike data, than affix compression is a clear win;  however, if 
> the language uses phonetic soundslike data (such as German, French, and 
> most importunately English) than the choice to enable affix compression 
> in the compiled hash table is much more difficult.  Aspell will support 
> both affix compression and phonetic soundslike lookup but the results may 
> not be as good.  Thus I, in general, don't recommend it.  You should use 
> the settings in the official dictionary package.

This seems something to be decided in a per dict basis and delegated on dict
maintainers. For some dicts the replacements code might suffice, but for
some others real phonetic code is needed. Not to mention sizes. When we
played with an aspell version of the catalan dictionary, the hash file went
over 100MB (yes, not a typo), but in my experiments with affix compression,
I think it went below 4MB (not have the dict here). The choice at that time
was to severely strip down the dictionary so the hash was manageable
(I think was ~10MB).

Brian, we should write something about this so dict maintainers have a clue.

> 
> > Regarding bzip2, it implies adding another dependency. While most systems
> > already have it installed I personally prefer using gzip, which must always
> > be present, even if that implies a larger size.
> 
> Well bzip2 is very common now and in fact my dictionary packages use bzip2
> and no one has complained yet.  This sounds like a policy decision that
> should possibly be discussed with other Debian developers (or whoever the
> appropriate people are on policy decisions such as that).

But that is for building the hash, that is usually done by dict package
maintainer. In our case hash will be built by each user, so each user is
forced to have bzip2 installed. The vast majority will have it, but I am
rather reluctant to force that.

And from other message,


> > You may also consider using "--validate-words" but those checks are
> > not very expensive.

> That should be "--dont-validate-words".

Thanks,

I only added "--dont-validate-affixes", I tested only gl-minimos and ca,
and catalan dict has some useless flags. Piping through
"aspell clean strict" gave me a lot of errors on the
'point in the middle char' that is used in catalan as part of words,
and I think that I had errors even on flag slashes in the affix
compressed ispell wordlist.

Cheers,

-- 
Agustin


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316451: gnumeric: EPS export for charts

[Jeffery von Ronne]

Package: gnumeric
Version: 1.5.2-1
Severity: wishlist


It would be nice to have an EPS and/or PDF chart "Save As Image" export 
option.  This would make it easier to incorporate gnumeric charts
to latex documents.

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (50, 'unstable')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.12-rc3-pattertwig
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages gnumeric depends on:
ii  gconf22.10.0-2   GNOME configuration database syste
ii  gnumeric-common   1.5.2-1common files for Gnumeric, the GNO
ii  gsfonts   8.14+v8.11+urw-0.2 Fonts for the Ghostscript interpre
ii  libart-2.0-2  2.3.17-1   Library of functions for 2D graphi
ii  libatk1.0-0   1.10.1-2   The ATK accessibility toolkit
ii  libbonobo2-0  2.8.1-2Bonobo CORBA interfaces library
ii  libbonoboui2-02.8.1-2The Bonobo UI library
ii  libc6 2.3.2.ds1-22   GNU C Library: Shared libraries an
ii  libgconf2-4   2.10.0-2   GNOME configuration database syste
ii  libglade2-0   1:2.5.1-2  library to load .glade files at ru
ii  libglib2.0-0  2.6.4-1The GLib library of C routines
ii  libgnome2-0   2.10.0-3   The GNOME 2 library - runtime file
ii  libgnomecanvas2-0 2.10.2-2   A powerful object-oriented display
ii  libgnomeprint2.2-02.10.3-2   The GNOME 2.2 print architecture -
ii  libgnomeprintui2.2-0  2.10.2-2   GNOME 2.2 print architecture User 
ii  libgnomeui-0  2.10.0-2   The GNOME 2 libraries (User Interf
ii  libgnomevfs2-02.10.1-5   The GNOME virtual file-system libr
ii  libgoffice-1  0.0.2-1Document centric objects library -
ii  libgsf-1  1.12.1-1   Structured File Library - runtime 
ii  libgsf-gnome-11.12.1-1   Structured File Library - runtime 
ii  libgtk2.0-0   2.6.4-3The GTK+ graphical user interface 
ii  libice6   4.3.0.dfsg.1-14Inter-Client Exchange library
ii  liborbit2 1:2.12.2-1 libraries for ORBit2 - a CORBA ORB
ii  libpango1.0-0 1.8.1-1Layout and rendering of internatio
ii  libpopt0  1.7-5  lib for parsing cmdline parameters
ii  libsm64.3.0.dfsg.1-14X Window System Session Management
ii  libxml2   2.6.16-7   GNOME XML library
ii  xlibs 4.3.0.dfsg.1-14X Keyboard Extension (XKB) configu
ii  zlib1g1:1.2.2-4  compression library - runtime

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316450: authentication does not more work

[Michelle Konzack]

Package: ssmtp
Version: 2.61-2
Severity: important

Error description:

I have a script which works since WOODY without any problems
and it write a message like:


To: [EMAIL PROTECTED]
From: [EMAIL PROTECTED]
Subject: Arghhh!
Date: `date -R`

some text


My script send it with

cat $MSG |ssmtp $MTAPARM

where $MTAPARM is "-t -au [EMAIL PROTECTED] -ap secret".

Now since I was using a SID Backport 2.61 I have used as $MTAPARM
"-t" only and setup /etc/ssmtp/ssmtp.conf with

  __( '/etc/ssmtp/ssmtp.conf' )_
 /
| [EMAIL PROTECTED]
| AuthPass=secret
| AuthMethod=cram-md5
 \__

which was working fine too.

Now, after upgrade to SARGE it does not more work and I get in my

  __( '/var/log/mail.log' )_
 /
| Jul  1 01:10:04 devel sSMTP[22345]: Unable to set AuthUser="linux4mich
| [EMAIL PROTECTED]" 
| Jul  1 01:10:04 devel sSMTP[22345]: Unable to set AuthPass="secret" 
| Jul  1 01:10:05 devel sSMTP[22345]: Sent mail for [EMAIL PROTECTED]
| et.de (221 mx0.freenet.de closing connection) uid=0 username=root outb
| ytes=952
| Jul  1 01:10:05 devel sSMTP[21930]: 550 syntax error in header
| 
 \__

while using "-t -au [EMAIL PROTECTED] -ap secret" and

  __( '/var/log/mail.log' )_
 /
| Jul  1 01:12:05 devel sSMTP[22764]: Sent mail for [EMAIL PROTECTED]
| et.de (221 mx2.freenet.de closing connection) uid=0 username=root outb
| ytes=952
| Jul  1 01:12:05 devel sSMTP[22366]: 550 syntax error in header
 \__

using "-t" plus auth-parameters set in /etc/ssmtp/ssmtp.conf

Now I have portet version 2.50 from WOODY to SARGE and it works.

Please can you check this ?


-- System Information
Debian Release: 3.1
Kernel Version: Linux devel 2.4.27-2-686 #1 Mon May 16 17:03:22 JST 2005 i686 
GNU/Linux


Versions of the packages ssmtp depends on:
ii  debconf1.4.30.13  Debian configuration management system
ii  libc6  2.3.2.ds1-22   GNU C Library: Shared libraries and Timezone
ii  libssl0.9.70.9.7e-3   SSL shared libraries


signature.pgp
Description: Digital signature

Bug#316445: Acknowledgement (gnumeric: crashes on chart export or attempt to print)

[Jeffery von Ronne]

The problem seesm to have been an old version of the gnome-volume-manager,
which was crashing the new libgnomevfs.  Deleting the old
gnome-volume-manager fixes things so that I can save/export stuff again.

-- 
Jeffery von Ronne <[EMAIL PROTECTED]> 
PhD Candidate, Information & Computer Science 
University of California, Irvine
ἐταπείνωσεν ἑαυτὸν γενόμενος ὑπήκοος μέχρι θανάτου, θανάτου δὲ σταυροῦ

Bug#316448: argus-client: ragraph broken with OpenBSD tcpdump/BPF output

[Karl O. Pinc]

Package: argus-client
Version: 2.0.6.fixes.1-2
Severity: normal

Hi,

OpenBSD has started reporting packet timestamps with
subsecond precision.  ragraph fails when given tcpdumps
with this extra precision.

Debian Sarge
argus-client Version: 2.0.6.fixes.1-2
librrds-perl Version: 1.0.49-1


$ ragraph bytes -M 1s -r xl0tiny.argus
/usr/bin/ragraph: unable to update `/tmp/file5xq7py.rrd': conversion of 
'1119972167.00' to long not complete: tail '.00'

$ ra -r xl0tiny.argus | head
06-29-05 22:12:03.620155   man   229.97.122.203  v2.0   
1 0  00 00
STA

I figure the problem is in argus rather than librrds-perl
as it's up to argus to call the rrd API appropriately.
Please correct me if I'm wrong.

Anything I can do to work around this?

Thanks.

Karl <[EMAIL PROTECTED]>
Free Software:  "You don't pay back, you pay forward."
 -- Robert A. Heinlein

P.S.  I tried reporting upstream to the argus developer
mailing list but am not subscribed and as the message
has not hit the mailing list archives I'm reporting
the problem here.


-- System Information:
Debian Release: 3.1
Architecture: i386 (i686)
Kernel: Linux 2.6.8-2-686-smp
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)

Versions of packages argus-client depends on:
ii  libc6   2.3.2.ds1-22 GNU C Library: Shared libraries an
ii  libncurses5 5.4-4Shared libraries for terminal hand

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316449: aptitude does not honor DEB_BUILD_OPTIONS=noopt

[Sami Liedes]

Package: aptitude
Version: 0.2.15.9-3
Severity: minor
Tags: patch

It would be nice if the building of aptitude honored
DEB_BUILD_OPTIONS=noopt. The minor patch below fixes this.

Sami



diff -ur aptitude-0.2.15.9/debian/rules new/debian/rules
--- aptitude-0.2.15.9/debian/rules  2005-07-01 02:13:48.746607264 +0300
+++ new/debian/rules2005-07-01 02:13:15.914598488 +0300
@@ -8,11 +8,20 @@
 # This is the debhelper compatability version to use.
 export DH_COMPAT=4
 
+CFLAGS=-g
+
+# Do not optimize the build with "noopt"
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+   CFLAGS += -O0
+else
+   CFLAGS += -O2
+endif
+
 build: build-stamp
 build-stamp:
dh_testdir
 
-   ./configure --prefix=/usr --mandir=\$${prefix}/share/man 
--infodir=\$${prefix}/share/info --disable-werror
+   CFLAGS="$(CFLAGS)" CXXFLAGS="$(CFLAGS)" ./configure --prefix=/usr 
--mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info --disable-werror
$(MAKE)
 
touch build-stamp



-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.12
Locale: LANG=C, [EMAIL PROTECTED] (charmap=ISO-8859-15)

Versions of packages aptitude depends on:
ii  apt [libapt-pkg-libc6.3-5-3 0.6.38   Advanced front-end for dpkg
ii  libc6   2.3.2.ds1-22 GNU C Library: Shared libraries an
ii  libgcc1 1:4.0.0-11   GCC support library
ii  libncurses5 5.4-8Shared libraries for terminal hand
ii  libsigc++-1.2-5c102 1.2.5-4  type-safe Signal Framework for C++
ii  libstdc++5  1:3.3.6-7The GNU Standard C++ Library v3

Versions of packages aptitude recommends:
ii  aptitude-doc-en [aptitude-doc 0.2.15.9-3 English manual for aptitude, a ter

-- no debconf information


signature.asc
Description: Digital signature

Bug#316447: remote code execution in PEAR::XML_RPC

[Martin Lohmeier]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Package: php4-pear
Version: 4.3.10-15
Tags: Security

Hi,

there is a problem with PEAR::XML_RPC, please have a look at
http://www.hardened-php.net/advisory-022005.php ,
http://cve.mitre.org/cgi-bin/cvename.cgi?name=CAN-2005-1921 and
http://www.mandriva.com/security/advisories?name=MDKSA-2005:109

by, Martin
- --

Powered by Debian GNU / Linux
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFCxHvwOvJj+wS6JuIRAl4SAKCYw7axZzje0ybXrLUGVCr+zxznkQCgyoyX
NIjMZUymsUQOw4cbM/NJjQs=
=Sb2Y
-END PGP SIGNATURE-


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316446: fetchmail: Sends delivery status notifications with non-null reverse-path

[Roger Lynn]

Package: fetchmail
Version: 6.2.5-12
Severity: important

When the local SMTP daemon rejects a message, Fetchmail generates a 
bounce messages with a non-null reverse-path, in violation of RFCs. In 
addition, the username it uses (FETCHMAIL-DAEMON) does not exist, so any 
responses will themselves bounce. This is likely to generate mail loops.

Also the message it sends has no subject, which is very unhelpful.

fetchmailrc:

set daemon 60
set postmaster "postmaster"
poll pop3.demon.co.uk aka mailstore protocol SDPS interface eth0/192.168.0.1
options localdomains rilynn.demon.co.uk no dns no envelope
user rilynn password foo to *
options fetchall no rewrite warnings 86400

The relevant part from fetchmail -v -v is below:

reading message [EMAIL PROTECTED]:1 of 1 (1683 octets)
fetchmail: passed through [EMAIL PROTECTED] matching rilynn.demon.co.uk
fetchmail: SMTP< 220 rilynn.demon.co.uk ESMTP Exim 4.50 Thu, 30 Jun 2005 
23:36:27 +0100
fetchmail: SMTP> EHLO localhost
fetchmail: SMTP< 250-rilynn.demon.co.uk Hello localhost [127.0.0.1]
fetchmail: SMTP< 250-SIZE 52428800
fetchmail: SMTP< 250-PIPELINING
fetchmail: SMTP< 250 HELP
fetchmail: forwarding to localhost
fetchmail: SMTP> MAIL FROM:<[EMAIL PROTECTED]> SIZE=1683
fetchmail: SMTP< 250 OK
fetchmail: SMTP> RCPT TO:<[EMAIL PROTECTED]>
fetchmail: SMTP< 550 unknown user
fetchmail: SMTP error: 550 unknown user
fetchmail: SMTP listener doesn't like recipient address [EMAIL PROTECTED]'
fetchmail: SMTP< 220 rilynn.demon.co.uk ESMTP Exim 4.50 Thu, 30 Jun 2005 
23:36:27 +0100
fetchmail: SMTP> HELO localhost
fetchmail: SMTP< 250 rilynn.demon.co.uk Hello localhost [127.0.0.1]
fetchmail: SMTP> MAIL FROM:<[EMAIL PROTECTED]>

*** Should be empty  ***

fetchmail: SMTP< 250 OK
fetchmail: SMTP> RCPT TO:<[EMAIL PROTECTED]>
fetchmail: SMTP< 250 Accepted
fetchmail: SMTP> DATA
fetchmail: SMTP< 354 Enter message, ending with "." on a line by itself
fetchmail: SMTP: (bounce-message body)
fetchmail: SMTP>. (EOM)
fetchmail: SMTP< 250 OK id=1Do7dz-eX-Cu
fetchmail: SMTP> QUIT
fetchmail: SMTP< 221 rilynn.demon.co.uk closing connection
fetchmail: SMTP> RCPT TO:<[EMAIL PROTECTED]>
fetchmail: SMTP< 250 Accepted
fetchmail: no address matches; forwarding to postmaster.

In addition to generating a bounce, the original mail is forwarded to 
postmaster, as can be seen on the last couple of lines above. My 
understanding of the man page is that either a bounce should be 
generated *or* it should be forwarded to the postmaster address, but not 
both.

Thanks,

Roger

-- System Information:
Debian Release: 3.1
Architecture: i386 (i686)
Kernel: Linux 2.6.8-2-686
Locale: LANG=en_GB, LC_CTYPE=en_GB (charmap=ISO-8859-1)

Versions of packages fetchmail depends on:
ii  adduser 3.63 Add and remove users and groups
ii  base-files  3.1.2Debian base system miscellaneous f
ii  debconf 1.4.30.13Debian configuration management sy
ii  debianutils 2.8.4Miscellaneous utilities specific t
ii  libc6   2.3.2.ds1-22 GNU C Library: Shared libraries an
ii  libssl0.9.7 0.9.7e-3 SSL shared libraries

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316443: asterisk bindaddr in sip and iax config is to fixed ip not interfaces

[Luke Kenneth Casson Leighton]

Package: asterisk
Severity: normal


please examine the samba source code for some appropriate detection
code that can determine the bindaddrs based on the name of the
interfaces, irrespective of the type of system on which asterisk is
compiled and run.

... if you run asterisk on an ADSL line, and want it to bind _only_ to
the ADSL port, such that you can run siproxd on the local interfaces,
guess what, guys: you CAN'T!!!

am gonna have to use NAT instead.

urgh.  sick.


-- System Information:
Debian Release: testing/unstable
Architecture: i386
Kernel: Linux highfield 2.6.11-1-686 #1 Fri May 20 07:34:54 UTC 2005 i686
Locale: LANG=C, LC_CTYPE=C



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316442: at does not mail job output if at command is installed by root

[Thomas Prokosch]

Package: at
Version: 3.1.8-11
Severity: important

When root installs an at command the command is run but the results are not
mailed. User IDs other than 0 work as expected.

-- System Information:
Debian Release: testing/unstable
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i586)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.8-2-386
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C)

Versions of packages at depends on:
ii  libc6   2.3.2.ds1-22 GNU C Library: Shared libraries an
ii  ssmtp [mail-transport-agent 2.61-3   extremely simple MTA to get mail o

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316444: libvcp-perl: failure copying from cvs to cvs

[Yann Dirson]

Package: libvcp-perl
Severity: important

Looking at svk, I wanted to investigate why "svk mirror" does not work
for me, so I start with simple vcp operations, like copying from a
remote cvs repo to a local one, but vcp fails:

$ vcp cvs::pserver:[EMAIL PROTECTED]:/cvsroot/boomerang:boomerang -r 1.1: 
cvs:/export/work/yann/tmp/cvstest:boom
vcp v0.9, change number 4232 (2004/03/18)
vcp: $ cvs login   # for 'anonymous'
CVS password:
vcp: $ cvs ... checkout boomerang   # establish local CVS workspace
vcp: appending required ChangeSets filter
vcp: $ cvs ... checkout boom   # establish local CVS workspace
vcp: cvs checkout failed.  Missing module?
vcp: $ cvs import ... boom   # create module in repository
vcp: $ cvs ... checkout boom   # establish local CVS workspace
vcp: running cvs log -r1.1: boomerang
vcp: found 9266 rev(s) with 2125 tag applications
vcp: aggregating changes
vcp: writing revisions: [| ]0/9266
unexpected stderr from 'cvs':
cvs: cvs [checkout aborted]: Absolute module reference invalid: 
`/boomerang/gui/boomerang.cpp'
cvs -Q -z9 -d:pserver:[EMAIL PROTECTED]:/cvsroot/boomerang checkout -r1.1 -p 
/boomerang/gui/boomerang.cpp returned 1 not 0
stderr:
cvs [checkout aborted]: Absolute module reference invalid: 
`/boomerang/gui/boomerang.cpp'
Can't fetch initial working directory at /usr/share/perl5/VCP/DB_File.pm line 
218
Can't fetch initial working directory at /usr/share/perl5/VCP/Driver.pm line 518
vcp: No such file or directory: 
/export/work/yann/wesnoth/cvs/tmp/vcp13552/dest-cvs/co
vcp: unable to remove work directory 
'/export/work/yann/wesnoth/cvs/tmp/vcp13552/dest-cvs/co'
Can't fetch initial working directory at /usr/share/perl5/VCP/Plugin.pm line 189



The problem comes from an invalid call to cvs, as shown in the log:

81.502063 vcp: $ cvs -Q -z9 -d:pserver:[EMAIL PROTECTED]:/cvsroot/boomerang 
checkout -r1.1 -p /boomerang/gui/boomerang.cpp > /export/work/yann/wesnoth/
cvs/tmp/vcp13552/source-cvs/co/revs/boomerang/gui/boomerang.cpp/1.1
cvs [checkout aborted]: Absolute module reference invalid: 
`/boomerang/gui/boomerang.cpp'
83.377613 vcp: unexpected stderr from 'cvs':
cvs: cvs [checkout aborted]: Absolute module reference invalid: 
`/boomerang/gui/boomerang.cpp'
cvs -Q -z9 -d:pserver:[EMAIL PROTECTED]:/cvsroot/boomerang checkout -r1.1 -p 
/boomerang/gui/boomerang.cpp returned 1 not 0
stderr:
cvs [checkout aborted]: Absolute module reference invalid: 
`/boomerang/gui/boomerang.cpp'


What is strange, is that Source::cvs.pm says:

   my $cvs_name = $self->SUPER::denormalize_name( $r->source_name );
   ## Use SUPER:: to avoid getting the leading '/'

Obviously SUPER::denormalize_name() does not ensure this in any way.
The following patch addresses this:

--- /usr/share/perl5/VCP/Source/cvs.pm.dist 2005-06-30 22:59:28.0 
+0200
+++ /usr/share/perl5/VCP/Source/cvs.pm  2005-06-30 23:00:59.0 +0200
@@ -544,8 +544,7 @@
my $wp = $self->work_path( "revs", $r->source_name, $r->source_rev_id ) ;
$self->mkpdir( $wp ) ;

-   my $cvs_name = $self->SUPER::denormalize_name( $r->source_name );
-   ## Use SUPER:: to avoid getting the leading '/'
+   ( my $cvs_name = $self->denormalize_name( $r->source_name ) ) =~ s{^/*}{};

$self->cvs( [
  "checkout",


This is however not sufficient:

vcp: running cvs log -r1.1: boomerang
vcp: found 9266 rev(s) with 2125 tag applications
vcp: aggregating changes
vcp: writing revisions: [- ]0/9266
no rev number found in cvs commit log output for 
/export/work/yann/svk/tmp/vcp14432/dest-cvs/co/boom/boomerang/gui/boomerang.cpp(/boomerang/gui/boomerang.cpp#1.1):
cvs revs parsed: $VAR1 = {};
Can't fetch initial working directory at /usr/share/perl5/VCP/Plugin.pm line 189


A quick investigation seems to show that dest::cvs::commit(), when
calling $self->cvs(), ignores stderr, and expects something on stdout,
but gets nothing on stdout.

I'll get a deeper look at it later, if noone beats me to it.

-- 
Yann Dirson<[EMAIL PROTECTED]> |
Debian-related: <[EMAIL PROTECTED]> |   Support Debian GNU/Linux:
|  Freedom, Power, Stability, Gratis
 http://ydirson.free.fr/| Check 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316445: gnumeric: crashes on chart export or attempt to print

[Jeffery von Ronne]

Package: gnumeric
Version: 1.5.2-1
Severity: important


I wanted to be able to export a chart from gnumeric to EPS and I
was having trouble getting the SVG export to do something useful
(it was shading all of the plot series's black), so I upgraded 
GNOME and gnumeric (from the versions in Sarge) hoping it would 
have better export functionality.  Instead after teh upgrade,
gnumeric just crashes everytime I try to export a chart or
print to a file.

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (50, 'unstable')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.12-rc3-pattertwig
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages gnumeric depends on:
ii  gconf22.10.0-2   GNOME configuration database syste
ii  gnumeric-common   1.5.2-1common files for Gnumeric, the GNO
ii  gsfonts   8.14+v8.11+urw-0.2 Fonts for the Ghostscript interpre
ii  libart-2.0-2  2.3.17-1   Library of functions for 2D graphi
ii  libatk1.0-0   1.10.1-2   The ATK accessibility toolkit
ii  libbonobo2-0  2.8.1-2Bonobo CORBA interfaces library
ii  libbonoboui2-02.8.1-2The Bonobo UI library
ii  libc6 2.3.2.ds1-22   GNU C Library: Shared libraries an
ii  libgconf2-4   2.10.0-2   GNOME configuration database syste
ii  libglade2-0   1:2.5.1-2  library to load .glade files at ru
ii  libglib2.0-0  2.6.4-1The GLib library of C routines
ii  libgnome2-0   2.8.1-2The GNOME 2 library - runtime file
ii  libgnomecanvas2-0 2.8.0-1A powerful object-oriented display
ii  libgnomeprint2.2-02.10.3-2   The GNOME 2.2 print architecture -
ii  libgnomeprintui2.2-0  2.10.2-2   GNOME 2.2 print architecture User 
ii  libgnomeui-0  2.8.1-3The GNOME 2 libraries (User Interf
ii  libgnomevfs2-02.10.1-5   The GNOME virtual file-system libr
ii  libgoffice-1  0.0.2-1Document centric objects library -
ii  libgsf-1  1.12.1-1   Structured File Library - runtime 
ii  libgsf-gnome-11.12.1-1   Structured File Library - runtime 
ii  libgtk2.0-0   2.6.4-3The GTK+ graphical user interface 
ii  libice6   4.3.0.dfsg.1-14Inter-Client Exchange library
ii  liborbit2 1:2.12.2-1 libraries for ORBit2 - a CORBA ORB
ii  libpango1.0-0 1.8.1-1Layout and rendering of internatio
ii  libpopt0  1.7-5  lib for parsing cmdline parameters
ii  libsm64.3.0.dfsg.1-14X Window System Session Management
ii  libxml2   2.6.16-7   GNOME XML library
ii  xlibs 4.3.0.dfsg.1-14X Keyboard Extension (XKB) configu
ii  zlib1g1:1.2.2-4  compression library - runtime

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316437: circular dependency between libgnomevfs2-common and libgnomevfs2-0

[Josselin Mouette]

Le jeudi 30 juin 2005 à 23:50 +0200, Bill Allombert a écrit :
> Package: libgnomevfs2-0
> Version: 2.10.1-5
> Severity: important
> 
> Hello GNOME maintainers,
> 
> There is a circular dependency between libgnomevfs2-common and
> libgnomevfs2-0. 
> 
> Circular dependencies are known to cause issues during upgrade
> between stable release. 

This one is even more complicated than GConf. Here are the contents of
libgnomevfs2-common:

* modules configuration: can stay in this package;
* example binaries: can probably be moved to a separate libgnomevfs2-bin
package;
* /usr/lib/gnome-vfs-2.0/modules/: this directory is already versioned
and can probably be moved as is to libgnomevfs2-0. It's probably still
possible, though, that upstream changes the SONAME without changing the
modules interface. The modules would thus stay in the same directory.
Moving this to libgnomevfs2-0 is thus risky.
* /usr/lib/gnome-vfs2/gnome-vfs-daemon: can be moved
to /usr/lib/gnome-vfs-2.0, with the same caveats;
* /usr/lib/bonobo/servers/: can stay in this package;
* documentation: can (should) be moved away;
* schemas, l10n, default applications: can stay in this package;
* /usr/lib/bonobo/monikers/libmoniker_gnome_vfs_std.so: this file is
impossible to move, as the directory depends on libbonobo. We'd have to
check whether it is possible to rename it. However I don't feel like it
_at all_.

While I'd be tempted to make the move for gconf2, as applications
shouldn't be affected, I'm currently not convinced the benefits of doing
it for libgnomevfs2 outweigh the risks.

Regards,
-- 
 .''`.   Josselin Mouette/\./\
: :' :   [EMAIL PROTECTED]
`. `'[EMAIL PROTECTED]
  `-  Debian GNU/Linux -- The power of freedom


signature.asc
Description: This is a digitally signed message part

Bug#315941: openoffice.org2: ooffice2 crashes when i select java under Tools/Options/OpenOffice.org

[Rene Engelhard]

[ please let the bug in the CC. thanks... ]

Hi,

Nils Bruenggel wrote:
> I noticed that it works fine with the sun java (proprietary), but it 
> does not seem right with gjc..

does work fine with gcj here, too. (Although I have both installed.
Hmm. No, works also when removing the Blackdown JDK..)
Do you have java-gcj-compat installed?

How does it crash?

Regards,

Rene


signature.asc
Description: Digital signature

Bug#316360: Please update magyar.ldf

[Szabo Peter]

Hi!


please update /usr/share/texmf/tex/generic/babel/magyar.ldf to the new
version available from
http://www.math.bme.hu/~pts/cvsget.cgi/u=magyar/p=/M=lakk/c=f1/n=/lakk/texmf/tex/generic/magyar/magyar.ldf


The proper URL is http://www.math.bme.hu/latex/ , which contains the link 
above. There is also a .deb package of MagyarLateX (containing magyar.ldf) 
which I've created to make installation to Debian systems simpler.



- the mathematicians tell me many things don't work correctly with the old
one. I can ask them to elaborate if necessary.


I can confirm this. Too many packages (such as graphics, 
hyperref, amsart) conflicting with the old one to list here. That's why 
I've created the new one.



Ah, interesting.  What kind of repository is this, and what is the lakk
module?


The repository is my private CVS repository. The lakk module our private 
module which contains a lot of software and a book we've written about 
LaTeX. The newest version of magyar.ldf and other files of MagyarLaTeX are

publicly available from the lakk module.


teTeX is usually made from CTAN, therefore it would be best if you ask
Peter Szabo to upload the file (together with magyar.dtx) to CTAN.


No, I won't upload it, because I don't have time to re-upload after each 
bugfix. Since it is free software, anybody can freely upload it anywhere. 
If you think it should be on CTAN, please upload it there.



Furthermore, he should add again the license statement that was in the
earlier version.


I've added a license statement a few minutes above. Please tell me if it's 
OK.



I hope that this is in fact a newer version, and not a fork -- the file
in our package says that Arpad Biro and Joszef Berces own copyright from
work until 2004 and doesn't mention Peter Szabo, while the file at the
above link says that Peter was working on it since 2003, and Joszef
stopped working in 2001.  This should really be cleared up --
unfortunately I don't have an e-mail address of any of them.


They are not working on it -- 1.4 appeared in 2001, and only a few minor 
bugfixes after that. Version 1.5 incorporates those bugfixes, any many 
more. I don't have their address, either.


Best regards,

Péter

--- (vvv use GNU); [EMAIL PROTECTED]; http://www.inf.bme.hu/~pts
[/dlflg/=u]dZ[lflglblp*lqlg*+lpla*lqlf*+sfsgsbdsalblex]dscZ[lb%O]sdzzKsa
[nlaldx*lflg%O*sfdsalblex]dsuZ[.]zsqsssgsbnsfspselsn[lcxsslqdlp+spz+sqdx]dx

Bug#316441: exim4-base: tls_on_connect_ports config field does not accept the service name rather than port.

[Alexander Myodov]

Package: exim4-base
Version: 4.50-8
Severity: normal

The field tls_on_connect_ports in the configs accepts only port number, and not 
the service name.
I.e., the line "tls_on_connect_ports = 465" is correct, while the line 
"tls_on_connect_ports = ssmtp" or "tls_on_connect_ports = smtps" causes Exim to 
generate the log lines like

  2005-07-01 02:15:26 tls_on_connect_ports contains "ssmtp", which is not a 
port number: exim abandoned
  2005-07-01 02:18:35 tls_on_connect_ports contains "smtps", which is not a 
port number: exim abandoned

Documents indeed do not describe that this field should accept the service 
name, though it is strange, as this field is very close by its meaning to 
daemon_smtp_ports which allows the settings like "daemon_smtp_ports = smtp : 
ssmtp".


-- Package-specific info:
Exim version 4.50 #1 built 27-May-2005 08:08:19
Copyright (c) University of Cambridge 2004
Berkeley DB: Sleepycat Software: Berkeley DB 4.2.52: (December  3, 2003)
Support for: iconv() IPv6 GnuTLS
Lookups: lsearch wildlsearch nwildlsearch iplsearch cdb dbm dbmnz dsearch nis 
nis0 passwd
Authenticators: cram_md5 plaintext
Routers: accept dnslookup ipliteral manualroute queryprogram redirect
Transports: appendfile/maildir/mailstore autoreply lmtp pipe smtp
Fixed never_users: 0
Configuration file is /var/lib/exim4/config.autogenerated
# /etc/exim4/update-exim4.conf.conf
#
# Edit this file and /etc/mailname by hand and execute update-exim4.conf
# yourself or use 'dpkg-reconfigure exim4-config'

dc_eximconfig_configtype='smarthost'
dc_other_hostnames='srv-castle.pvt:honeyman.nnov.ru'
dc_local_interfaces='127.0.0.1:192.168.0.9:192.168.1.1:82.208.85.183'
dc_readhost=''
#dc_relay_domains='ws-honeyman.pvt'
dc_minimaldns='false'
#dc_relay_nets='192.168.0.0/16'
dc_smarthost='smtp.mts-nn.ru'
CFILEMODE='644'
dc_use_split_config='true'
dc_hide_mailname='false'
# dc_localdelivery='maildir_home'
dc_relay_domains=''
dc_relay_nets=''
dc_mailname_in_oh='true'
dc_localdelivery='cyrus_inbox_delivery'
mailname:honeyman.nnov.ru

-- System Information:
Debian Release: 3.1
Architecture: i386 (i586)
Kernel: Linux 2.6.6-1-386
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages exim4-base depends on:
ii  adduser 3.63 Add and remove users and groups
ii  cron3.0pl1-86management of regular background p
ii  debconf [debconf-2.0]   1.4.30.13Debian configuration management sy
ii  exim4-config [exim4-con 4.50-8   configuration for the exim MTA (v4
ii  libc6   2.3.2.ds1-22 GNU C Library: Shared libraries an
ii  libdb4.24.2.52-16Berkeley v4.2 Database Libraries [
ii  netbase 4.21 Basic TCP/IP networking system
ii  passwd  1:4.0.3-31sarge5 change and administer password and

-- debconf information excluded


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316440: FTBFS: build-depends not strict enough

[Christian T. Steigies]

Package: policycoreutils
Version: 1.24-1
Severity: important

policycoreutils failed to build on my m68k box, as on all other arches. It
has since been tried again on s390 (unlike checkpolicy, the rebuild on ia64
failed), where it succeeded to build. When looking at those build-logs, it
seems that the successsful build used libsepol1-dev 1.6-1, while the failed
builds used libsepol1-dev 1.4-1. Your build-depends say libsepol1-dev (>=
1.4-1), maybe you should change that to >= 1.6-1. Alternatively you could
ask for the build to be retried on all remaining arches, which would
probably work. But if libsepol1-dev 1.4-1 is buggy, the cleaner solution
would be to tighten the build-deps, IMHO.

Christian


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316439: FTBFS: build-depends not strict enough

[Christian T. Steigies]

Package: checkpolicy
Version: 1.24-1
Severity: important

checkpolicy failed to build on my m68k box, as on all other arches. It has
since been tried again on two arches, where it succeeded to build. When
looking at those build-logs, it seems that the successsful build used
libsepol1-dev 1.6-1, while the failed builds used libsepol1-dev 1.4-1.
Your build-depends say libsepol1-dev (>= 1.4-1), maybe you should change
that to >= 1.6-1. Alternatively you could ask for the build to be retried on
all remaining arches, which would probably work. But if libsepol1-dev 1.4-1
is buggy, the cleaner solution would be to tighten the build-deps, IMHO.

Christian


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#245358: mrtg: init script

[George B.]

On 6/30/05, Adam Majer <[EMAIL PROTECTED]> wrote:
>
> I think the best way is just add /etc/default/mrtg file with option,
> 
> # uncomment to run as a daemon
> #
> # RUN_AS_DAEMON="true"
> 
> Then have in /etc/init.d/mrtg,
> 
> . /etc/default/mrtg
> test "x$RUN_AS_DAEMON" == "xtrue" || exit 1;
> 
> and something similar in the mrtg cronjob to prevent running if
> RUN_AS_DAEMON is set to true.

Good idea, however what about if the user sets the 'RunAsDaemon'
option in mrtg.conf (i.e. with cfgmaker ) and then wonders why it
still does not work? Perhaps not introducing any more config files
than the package already provides might be best? This is why I have
been trying to get the script to check for that option - transparent
as far as the user is concerned.

I think I need sleep now 8-|

.George.

Bug#316438: fwbuilder: very simple program which outputs an html report from a .fwb xml file

[Luke Kenneth Casson Leighton]

Package: fwbuilder
Version: 2.0.3-2
Severity: normal


attached is a joyously useful program that makes up for the lack of
print reporting in fwbuilder.

it's a dog, it's hacked, it works.  i wouldn't recommend making python a
dependency because of it, but i _would_ recommend dumping it in the
/usr/share/doc/fwbuilder/examples directory and referencing it in the
README.

or makin a separate apt-get install package for it (with a dep on
python)

l.

#!/usr/bin/env python

from xml.dom.minidom import parseString, parse


class fw:

def __init__(self):

self.hosts = {}
self.descriptions = {}

def print_comment(self, c):
print ''
for l in c.split("\\n"):
while l:
bp = l.find(' ', 50)
if bp < 50: bp = 50
if len(l) >= 50:
end = l.rfind(' ')
if end <= 50:
bp = end
print "%s" % l[:bp]
l = l[bp:]
print ''


def decode_address_ranges(self, i):
adrs = []
print ''
for a in i:
print ''
self.descriptions[a.getAttribute('id')] = 
a.getAttribute('name')
print """
 %s: 
 %s 
 %s 
""" % \
(a.getAttribute('name'),
 a.getAttribute('start_address'),
 a.getAttribute('end_address'))

comment = a.getAttribute('comment')
if comment:
print ''
print ''
print ' '
print ''
self.print_comment(comment)
print ''
print ''
print ''

def decode_ipv4(self, i):
adrs = []
print ''
for a in i:
self.descriptions[a.getAttribute('id')] = 
a.getAttribute('name')
print ''
print "%s:  %s/%s" % \
(a.getAttribute('name'), 
a.getAttribute('address'), a.getAttribute('netmask'))
print ""
comment = a.getAttribute('comment')
if comment:
print ''
print ''
print ' '
print ''
self.print_comment(comment)
print ''
print ''
print ''

def decode_interface(self, i):
self.descriptions[i.getAttribute('id')] = i.getAttribute('name')

print ''
print "Interface: %-8s   %s " % \
(i.getAttribute('name'), i.getAttribute('label'))
print ""
self.decode_ipv4(i.getElementsByTagName('IPv4'))
print ""
print ""

def get_desc(self, id):
if type(id) is not list:
id = [id]
l = []
for i in id:
l.append(self.descriptions.get(i, "" % 
str(i)))
return ''.join(l)

def decode_host(self, h):
self.descriptions[h.getAttribute('id')] = h.getAttribute('name')

print ""

print ''
print ''
print "Hostname:  %s" % h.getAttribute('name')
print ""
print ''

print ""

print ""

print ''
for i in h.getElementsByTagName('Interface'):
self.decode_interface(i)
print ''

print ""

def decode_hosts(self, o):

print ''
hl = o.getElementsByTagName('Host')
for h in hl:
print ''
self.decode_host(h)
print ''
print ''

def decode_svc_icmp(self, t):

self.descriptions[t.getAttribute('id')] = t.getAttribute('name')
print """


   Name: %-10s 
   Code: %s 

Bug#316436: mozilla-firefox: firefox should honor /etc/ssl/certs/

[Peter Palfrader]

Package: mozilla-firefox
Version: 1.0.4-3
Severity: normal

Hi,

as a site admin I tend to place my local root certificate in
/etc/ssl/certs on all my systems.  wget and w3m use this directory and
now accept certs signed by my CA without checking back with the user.

I think firefox too should accept certificates placed by the admin in
/etc/ssl/certs.

Ideally it would use those exclusively.  If the admin wants they can
still install ca-certificates to get all the silly certs by the big
ssl cert businesses.

-- 
Peter


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316435: konqueror should honor /etc/ssl/certs/

[Peter Palfrader]

Package: konqueror
Version: 4:3.3.2-1
Severity: normal

Hi,

as a site admin I tend to place my local root certificate in
/etc/ssl/certs on all my systems.  wget and w3m use this directory and
now accept certs signed by my CA without checking back with the user.

I think firefox too should accept certificates placed by the admin in
/etc/ssl/certs.

Ideally it would use those exclusively.  If the admin wants they can
still install ca-certificates to get all the silly certs by the big
ssl cert businesses.

-- 
Peter


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#316437: circular dependency between libgnomevfs2-common and libgnomevfs2-0

[Bill Allombert]

Package: libgnomevfs2-0
Version: 2.10.1-5
Severity: important

Hello GNOME maintainers,

There is a circular dependency between libgnomevfs2-common and
libgnomevfs2-0. 

Circular dependencies are known to cause issues during upgrade
between stable release. 

See 
for a discussion.

Cheers,
-- 
Bill. <[EMAIL PROTECTED]>

Imagine a large red swirl here. 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#245358: mrtg: init script

[Adam Majer]

George B. wrote:

>On 6/30/05, Adam Majer <[EMAIL PROTECTED]> wrote:
>  
>
>>Thanks. I'll add it to the next upload but mrtg will not start as a
>>daemon by default. 
>>
>>
>
>1) Extract all 'RunAsDaemon' lines from config file.
>2) Find a line that does not contain a '#' before the 'RunAsDaemon'.
>3) If not found, then exit.
>
>I've spent the last few hours poking at it, but I did not get anywhere. :-(
>  
>
I think the best way is just add /etc/default/mrtg file with option,

# uncomment to run as a daemon
#
# RUN_AS_DAEMON="true"

Then have in /etc/init.d/mrtg,

. /etc/default/mrtg
test "x$RUN_AS_DAEMON" == "xtrue" || exit 1;

and something similar in the mrtg cronjob to prevent running if
RUN_AS_DAEMON is set to true.

- Adam



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]