Hi Olafur,
Olafur Jens Sigurdsson wrote:
Package: kaffe
Version: 2:1.1.6-3
Hi, my cron job turns up the following error:
mandb: warning: /usr/share/man/man1/rmic.1.gz is a dangling symlink
and checking the file gives that it is a symlink to
/etc/alternatives/rmic.1.gz
which is a broken syml
package: pound
version: 1.9.4-1
While using 'dpkg-source -x' and 'dpkg-buildpackage', I noticed that
CFLAGS changes to debian/rules file were completely ignored.
1. For some reason, CFLAGS always ended up '-g -O2' during the build no
matter what was specified in debian/rules.
2. Exporting C
Hi Oystein,
Oystein Gisnas wrote:
Package: ant
Version: 1.6.5-3
Followup-For: Bug #126477
When this bug was tagged upstream in 2002, was a bug filed upstream as well?
There seem to be no work on TarOutputStream, but
http://issues.apache.org/bugzilla/show_bug.cgi?id=35544 describes and fixes a
Jens Seidel <[EMAIL PROTECTED]> wrote:
> On Thu, Dec 01, 2005 at 07:30:17PM +0100, Frank Küster wrote:
>> I have looked into this bug, and it seems that it is the fault of
>> debiandoc-sgml. With reference.zh-cn.sgml, it produces the following
>> LaTeX code
>>
>> \ifpdf
>> \usepackage[colorlinks
Package: cryptsetup
Version: 20050111-4
Severity: normal
The /etc/init.d/cryptdisks script should check that a (x86) hard disk
partition device is marked as a swap partition in the partition table
before running mkswap on it. This is to avoid overwriting useful data
in case the hard disks get swa
Hello,
On Mon, Dec 05, 2005 at 12:25:56PM +0800, YANG Shouxun wrote:
> Package: libcamlimages-ocaml-dev
> Version: 2.20-5
> Severity: important
>
> As shown by the following webpages or "apt-cache show", camlimages packages
> still depend on liblablgtk.
>
> http://packages.debian.org/unstable/l
severity 342056 normal
tag 342056 unreproducible
tag 342056 moreinfo
thanks
I also followed the tutorial but couldn't reproduce the problem. Could
you send my the filesystem so I can check with yours? A gzipped empty
filesystem shouldn't be too big.
> I cannot install quota support properly. I ha
> 1) Network card and conneection successfully detected. Installion of base
> system is completed. Computer Reboot.
> 2) *Problem* - Now, computer reboot, and the installer is suppose to prompt
> for setting up apt and download some extra stuff to complete installation.
> However, it appears th
Manoj Srivastava <[EMAIL PROTECTED]> writes:
> Unfortunately, there is not a whole lot of detail to go on
> here. As for the clean problem, do you see ./stamp-building? If so,
> that is the culprit; normally, make-kpkg creates stamp-building while
> calling dpkg-buildpackage (which in t
tags 341417 + patch
thanks
Attached a tested and working patch for the staticcopy script. It also
moves the scripts back to /usr/share/bamboo/scripts, where they used to
be.
--
bye,
pabs
http://wiki.debian.org/PaulWise
diff -u bamboo-1.3/debian/bamboo.install bamboo-1.3/debian/bamboo.install
--
On Thu, Nov 24, 2005 at 06:30:07PM +0100, Stefano Melchior wrote:
> > An updated PHP license[1] has just become available which should
> > address Debian's concerns. I'll try to put together an updated
> > package some time over the long weekend (it's a holiday here in the
> > US).
> >
> > [1] h
On Tue, 2005-11-22 at 01:53 +0100, Daniel Nylander wrote:
> Here is the swedish translation of xmms-goom
>
Thank you for the translation. The binary you translated isn't included
in Debian's xmms-goom package but I'll forward your work to the upstream
author.
John
signature.asc
Description:
> Lack NTFS mount option in installer, but have 2 fat32 options. (Can't see
> the diffrence between the two)
> Though we can't write to NTFS, it's still readable. I think it's reasonable
> to add such option.
I think we already have a request for NTFS support in partman. As this
is the only is
Package: mod-cband
Severity: normal
"If you wish to enable the cband module now, answer this question with true."
Debconf templates should never make assumptions on the value of debconf
widgets which depend on interfaces (dialog uses a Yes/No question for
instance while GTK uses a checkbox).
I s
Package: exim4-config
Version: 4.52-2
Severity: wishlist
(CC'ing -boot as this is strongly installer-related given that exim4 is
installed on all systems by default)
I already imagined suggesting this for sarge but it was then a bit late.
The currentl dc_eximconfig_configtype question is asked a
Package: installation-guide
Severity: normal
X-debbugs-CC: Ross Boylan <[EMAIL PROTECTED]>
Below are reports by Ross Boylan for suggested changes to the
installation guide about PXE boot setup.
I confirm Ross comments about the real location of the tftpboot root
directory. I went on the issue my
> mairix 0.17 now handles gzip, but it needs to be built using zlib in
> order to do so. I suppose the build dependencies need to be updated?
Yes. I think this is about right. I'll try this out tomorrow.
Regards,
Mako
--
Benjamin Mako Hill
[EMAIL PROTECTED]
http://mako.cc/
--
To UNSUBSCR
On Wed, 2005-11-23 at 23:09 +0100, Felix C. Stegerman wrote:
> Hi,
>
> Sorry it took so long, but I had a lot of things to do
> (and I kind of forgot about xprint).
>
> Here's a simple gdb backtrace of my self-compiled xprint.
>
> I don'd know much about gdb, so please tell me what to do next if
Package: gtkpod
Version: 0.94.0-1
Severity: normal
Uploading tracks to an iPod fails when the folders
iPod_Control/Music/F00 through F19 don't exist yet, for example on a
new, empty iPod. Creating the folders manually worked around the
issue. gtkpod creating the missing folders would solve the iss
On 12/5/05, Ryan Nowakowski <[EMAIL PROTECTED]> wrote:
> The dll is required for some log4j functionality, specifically logging
> to Windows Event Log. In the past, the log4j developers have forgotten
> to build this dll when packaging binary releases. I thought that might
> be the case here. If
Hi,
Unfortunately, there is not a whole lot of detail to go on
here. As for the clean problem, do you see ./stamp-building? If so,
that is the culprit; normally, make-kpkg creates stamp-building while
calling dpkg-buildpackage (which in turn calls clean, and we do not
want dpkg-buildpa
Package: vim
Version: 6.4-001+2
'@PKG@' isn't replaced with 'vim' in /usr/share/menu/vim, so GVIM
doesn't appear in my menus : (
Thanks for maintaining Vim!
Jack
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
The dll is required for some log4j functionality, specifically logging
to Windows Event Log. In the past, the log4j developers have forgotten
to build this dll when packaging binary releases. I thought that might
be the case here. If it is part of Debian Policy[tm] to not package it,
that's fine
reassign 340486 kernel-package
close 340486 10.012
thanks
Hi,
Thanks for testing. As the original submitter has reported that the
problem is fixed by a recent upload of kernel-package 10.012, I'm
reassigning and then closing the bug appropriately.
Best regards,
Jurij Smakov
Package: bash
Version: 3.0-17
Severity: minor
Please allow apt-cache madison to be completed.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Clytie Siddall wrote:
> Sorry, my translation program has been munging text after completion.
> I've fixed the error, in the file below.
>
> from Clytie
Thank you for the update.
-Brian
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PRO
Package: happydigger
Severity: wishlist
Tags: patch l10n
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Please find attached the Tagalog program translation file for happydigger from
Roel Cantada.
- -- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500
Package: backuppc
Version: 2.1.2
Severity: important
I have tried the packaged .deb version as well as compiling the program from
source. Running the init script produces an "ok" message but the process
immediatley segfaults. There were no errors during compilation, installation or
config setup
Sorry, my translation program has been munging text after finishing.
The fixed file is attached below.
from Clytie
shorewall_2.2.5-3.vi.po.gz
Description: GNU Zip compressed data
reopen 326720
tag 326720 - fixed-upstream
tag 326720 + patch
thanks
In the interest of taking full advantage of Andrie's correction,
please remove the first line:
One has carg(z) = atan(cimag(z) / creal(z)).
One has tan(carg(z)) = cimag(z) / creal(z).
Alternately, make the first line correct
On Sun, Dec 04, 2005 at 06:14:46PM -0600, Ryan Nowakowski wrote:
> Package: liblog4j1.2-java
> Version: 1.2.12-1
> Severity: normal
>
>
> The NTEventLogAppender.dll file is not included. I believe this is an
> upstream issue because it's happened before[1] in 1.2.4.
>
> 1. http://issues.apache.
Sorry, my translation program started munging text after finishing.
All fixed in file attached.
from Clytie
vi.po.gz
Description: GNU Zip compressed data
Package: libapache2-svn
Version: 1.1.4-2
Severity: normal
The package does not put the usual files into
/etc/apache2/mods-available/, which would allow the use of a2enmod and
a2dismod to, respectively, enable or disable the module.
-- System Information:
Debian Release: 3.1
APT prefers unstable
Sorry, my translation program has been munging text after completion.
I've fixed the error, in the file below.
from Clytie
vi.po.gz
Description: GNU Zip compressed data
tags 337006 + unreproducible
thanks
Chapko Dmitrij <[EMAIL PROTECTED]> writes:
> gatev:~# awk --version
> GNU Awk 3.1.3
>
> gawk version - 1:3.1.3-3
> gatev:~# echo -e "543.21 1234.56\n2345.67 765.43"|awk '{if($1>$2){print
> $1-$2}}
> '
> 1580.24
>
> gate:~# awk --version
> GNU Awk 3.1.4
>
In article <[EMAIL PROTECTED]> you wrote:
> Package: linux-2.6
> Severity: minor
>
> I'm booting using the "quiet" kernel option. During the synthesizing
> of the initial hotplug events, I see the following messages show up:
>
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: shpc_init
In article <[EMAIL PROTECTED]> you wrote:
> [-- text/plain, encoding quoted-printable, charset: us-ascii, 29 lines --]
>
> Just had a look at the 2.6.14 kernel image packages, and this is still a
> problem.
>
> The .extraversion file that exists is not read by anything in the kernel
> makefiles s
I've seen this, and in my case it turned out to be a limiatation of
the Linux VFAT implementation.
Darcs is designed to work well on case-preserving filesystems, whether
case-sensitive (as traditional Unix filesystems) or not (as Mac OS X'
HFS+). Darcs does not work on filesystems that don't pres
Package: libcamlimages-ocaml-dev
Version: 2.20-5
Severity: important
As shown by the following webpages or "apt-cache show", camlimages packages
still depend on liblablgtk.
http://packages.debian.org/unstable/libdevel/libcamlimages-ocaml-dev
http://packages.debian.org/unstable/libs/libcamlimages
>>> Doesn't like pasted text.
>>> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=333251
Any chance somebody could dtry to reproduce this under strace, and
find out which operation exactly is failing?
I suspect it might be a problem with the Ghc runtime, though. Could
some Haskell guru find out
Package: azureus
Version: 2.3.0.6-1
Severity: normal
Some options are missing in the new version's option dialog, *even in
advanced mode*. Namely, the "Priorize most completed files" option is
missing.
However, that option STILL exists, and it STILL works... but now I cannot
disable it anymore!
Package: gnome-games
Version: 1:2.10.1-5.1
Severity: minor
Tags: patch
in gnobots2 on my mixed etch/sid system, i'm offered two non-sensical
graphics themes "teleport" and "rteleport". It looks like this is
because a function in graphics.c is mis-filtering
/usr/share/pixmaps/gnobots, and doesn't
Mario Minati <[EMAIL PROTECTED]> (02/07/2005):
> The following files are missing in drqueue/bin compared to what I achieve
> by compiling the sources:
> sendjob.Linux, drqman.Linux
Hi!
I've got exactly the same problem on my sid/i386 box. To be precise,
what is called 'compiling the sources' is c
package: kernel-package
version: 10.012
I had make 3.80-9 installed. And kept getting this error:
==
[EMAIL PROTECTED]:~/kernel/xen/linux-2.6.10-xenU$ time fakeroot make-kpkg
kernel-image
exec make -f /usr/share/kernel-package/ruleset/minimal.mk debian
/usr/share/kernel-package/ruleset/misc/ver
Package: pstngw
Version: 1.3.1-4
Severity: grave
The openh323 package has been rebuilt for the C++ c2a ABI transition, which
means that the library package's name has changed. Because pstngw has
previously been binNMUed under the old versioning scheme, a sourceful upload
is required to rebuild ag
close 341820
severity 341504 normal
merge 341820 341504
thanks
On Sat, Dec 03, 2005 at 01:13:29PM +0100, [EMAIL PROTECTED] wrote:
>I can't install this package libapt-pkg-perl.
>
># apt-get install libapt-pkg-perl
>Reading package lists... Done
>Building dependency tree... Done
>Some packages coul
When Debian migrates to Python 2.4 (or later) as the "default" Python,
reportbug will follow.
On 12/4/05, root <[EMAIL PROTECTED]> wrote:
> Package: reportbug
> Version: 3.17
> Severity: wishlist
>
>
> It would be really nice if reportbug worked with python2.4 instead of 2.3.
>
> On several of my
James Bottomley <[EMAIL PROTECTED]> wrote:
> OK, try the attached. If it works out, I'll soak it in -mm for
> a while and then try to put it in as a bug fix for 2.6.15.
This works for me. The DV write tests are skipped and the system boots
cleanly. The boot messages are the same as when we ifde
Package: svk
Version: 1.04-1
Severity: normal
I don't know if this really is a svk problem, or if its subversion or even
something below that - please reassign this bug if you think so.
The problem:
using a mirrored https svk repository, mirror config created through
cd /usr/src
svk co https
reassign 303534 openoffice.org
close 303534 2.0.0-3
thanks
Hi,
this bug is fixed in 2.0.0-3 which now conflicts against the long
obsolete crashrep.
Gr??e/Regards,
Ren?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: libbonobo, libbonoboui, libglade, bonobo-activation
Severity: minor
Is there any reason not to put everything from
/usr/share/gtk-doc/html/X into the relevant place in
/usr/share/doc/X/html/ ?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Conta
Hello,
kde-i18n 3.4.3-2 may have been rebuilt against a transitioned kdelibs, but
the individual kde-i18n-foo packages still depend on kdelibs4c2, thus
making them uninstallable in Sid. Thus unfortunately another upload is
needed.
Thanks,
Christopher Martin
pgp6uWQGwhUbf.pgp
Description: PGP
I seem to have a working gnucash now. The solution was to grab
libofx2 out of testing.
--James Aspnes <[EMAIL PROTECTED]>
On Sun, Dec 04, 2005 at 02:39:06PM -0800, Steve Langasek wrote:
> On Sun, Dec 04, 2005 at 02:19:49PM -0800, Thomas Bushnell BSG wrote:
>
> > I apologize; my previous explana
Package: kernel-package
Version: 10.012
Severity: grave
Errors can be found here:
debian/ruleset/targets/source.mk: (cd $(SRCDIR); find . -type d
-name .arch-ids --exec rm -rf {} \; )
debian/ruleset/targets/headers.mk: (cd $(SRCDIR); find . -type d
-name .arch-ids --exec rm -rf {} \; )
Exchanged some mail with Joerg Schilling and he might have found a solution.
Tried then the patch on the 4:2.01+01a03-3 source and it seems to work:
Try to change cdrecord.c:
if (((dp->cdr_dstat->ds_flags & DSF_ULTRASPP_ERA) != 0 &&
speed < 16) || (dp->cdr_cdr
On Sun, Dec 04, 2005 at 03:35:51PM +0100, Jonas Smedegaard wrote:
> Thanks for the clarification. Indeed it works when passing the variables
> to make environment instead of only to the outside one.
>
> The bigger aim is to allow building with standard Debian package
> building tools rather than b
On Mon, Dec 05, 2005 at 01:01:16AM +0100, Frans Pop wrote:
> On Monday 05 December 2005 00:39, Ross Boylan wrote:
> > The latest (Dec 3) daily build seems able to detect my hard drive.
> > I got it via PXE booting.
>
> Glad to hear that. It was somewhat to be expected as the new images use a
> 2
Package: exim4-config
Version: pulled in by etch installer daily build
Severity: minor
debconf says "Please eneter here the networks of local machines for which you
accept to relay mail."
I think you "EXPECT to relay mail." But maybe you mean "accept OR
relay mail"?
Also, the use of "you" vs.
Package: linux-image-2.6.14-2-686
Version: 2.6.14-4
Severity: important
The version 1.1.0 of ipw2100, which came with kernel 2.6.14-2-686
as a module, couldn't work with wpasupplicant because of several
known bugs listed in the driver's website. Those bugs had been
tag 342059 patch
thanks
Included is a patch to fix the source of the problem. The manpage
must be regenerated; I don't know if that will happen automatically
(though really it should).
--- /usr/bin/svnpath2005-12-04 19:25:30.0 -0500
+++ /tmp/svnpath2005-12-04 19:25:29.
tag 340468 + confirmed
retitle 340368 creating tables fail with "libhsqldb2: file not found" when
using gij
thanks
Hi,
[EMAIL PROTECTED] wrote:
> I cannot create tables in a new, empty database file.
>
> Create a new Base document named Employees using HSQLDB (with only default
> options). Then
Package: subversion
Version: 1.2.3dfsg1-2
Severity: normal
File: /usr/share/man/man1/svnpath.1.gz
svnpath.1 includes an invalid .SH NAME entry:
.SH "NAME svnpath"
should be just
.SH NAME
as in all the other svn* manpages.
Compare:
$ lexgrog /usr/share/man/man1/svnpath.1.gz
/usr/share/m
Package: liblog4j1.2-java
Version: 1.2.12-1
Severity: normal
The NTEventLogAppender.dll file is not included. I believe this is an
upstream issue because it's happened before[1] in 1.2.4.
1. http://issues.apache.org/bugzilla/show_bug.cgi?id=9606
-- System Information:
Debian Release: testing/u
Message from David Roundy:
>> Command to provide a summary of an emailed patch.
>> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=335043
>
> apply --dry-run would be a good thing to add.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PR
On Monday 05 December 2005 00:39, Ross Boylan wrote:
> The latest (Dec 3) daily build seems able to detect my hard drive.
> I got it via PXE booting.
Glad to hear that. It was somewhat to be expected as the new images use a
2.6.14 kernel instead of the 2.6.8 (sarge) and 2.6.12 (etch beta1)
kern
Message from David Roundy:
>> Darcs hang on some conflicts during pull
>> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=336327
>
> This is a known issue, and not going to be fixed until the new conflict
> handling code is done. It's much of the reason for the new conflict
> handling code.
-
Message from David Roundy:
>> Doesn't like pasted text.
>> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=333251
>
> I've seen this before, but it's hard to reproduce, and I haven't tracked
> down what precisely causes it. It's something to do with our buffer
> handling.
I have also seen this.
Message from David Roundy:
>> "get"-ing a repository that contains an upper case file name fails on vfat
>> filesystem
>> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=325693
>
> This is an odd one--I've never seen a bug report like it.
David, what do you think of the attached patch in the De
Message from David Roundy:
>> Please reflow --help output to the terminal width
>> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=332542
>
> I'd put it as a wishlist. I think it'd be a good idea, but would
> require quite a bit more infrastructure in our printing engine.
--
To UNSUBSCRIBE,
Message from David Roundy:
> darcs: --set-scripts-executable works partially
> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=328032
> Can you see if you can reproduce this bug? I don't get it, at least not
> with a remote get. For a local get, --set-scripts-executable has no
> effect--which i
Message from David Roundy:
>> darcs: ignores changes if an absolute path is specified
>> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=306063
>
> Still there, and someone could fix it, I suppose. It doesn't strike me as
> being very high priority.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTE
Message from David Roundy:
>> fails to look for new files if there is a socket
>> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=304264
>
> Worth fixing.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Message from David Roundy:
>> darcs.cgi should be compatible with darcs-createrepo
>> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=297782
>
> I'd really like to just remove darcs-createrepo, as it's a complicated
> ill-tested script that must be run as root. That would "solve" this
> problem.
reassign 342004 xserver-xfree86
retitle 342004 xserver-xfree86: poor support for graphics device in HP Pavilion
7845s
thanks
On Sun, Dec 04, 2005 at 12:00:46PM -0700, Joseph Michael Smidt wrote:
> *** Please type your report below this line ***
> I have successfully installed Etch from the testin
On Mon, Dec 05, 2005 at 12:20:36AM +0100, Attilio Fiandrotti wrote:
> Package: cdebconf-gtk-udeb
> Severity: normal
>
> DirectFrameBuffer by default enables hardware acceleration whenever
> possible, this resulted in a DFB crash on many PPC systems [1] .
> DFB's HW acceleration should be disabled
The latest (Dec 3) daily build seems able to detect my hard drive.
I got it via PXE booting.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: initramfs-tools
Version: 0.41
After a test in vmware installing 2.6.14-4-686 using initramfs-tools, the
system failed to reboot.
AFAICT the initrd (udev?) failed to load the BusLogic module even though
it is included in the initrd.
Note that BusLogic is known to be missing sysfs suppor
Package: quota
Version: 3.12-6
Severity: grave
Justification: renders package unusable
I cannot install quota support properly. I have quota support compiled
into the kernel:
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
I'll go recompile the kernel with CONFIG_Q
Le jeudi 01 décembre 2005 à 11:50 +0200, Tzafrir Cohen a écrit :
> On Wed, Nov 30, 2005 at 09:14:32PM +0100, Jerome Warnier wrote:
> > Package: asterisk
> > Version: 1:1.2.0.dfsg-4
> > Severity: wishlist
> >
> > [EMAIL PROTECTED]:~/debian/asterisk-1.2.0.dfsg$ debuild
> > dpkg-buildpackage: source
tags 339921 + unreproducible
tags 339921 + patch
thanks bts
I am not able to reproduce this on sid now:
~/tmp/339921/doc++-3.4.10/src$ rm -f docify.o && make docify.o
source='docify.cc' object='docify.o' libtool=no \
depfile='.deps/docify.Po' tmpdepfile='.deps/docify.TPo' \
depmode=gcc3 /bin/sh .
Package: hal
Version: 0.5.5.1-1
Severity: normal
Tags: experimental patch
Hey,
when upgrading to the new hal package, I notized, that its firewire disc
support is broken with newer sbp2 drivers. These don't assign SCSI Type
"Disk" anymore, but "RBC" (what ever that might mean). A patch on
[EMAIL
Package: cdrecord
Version: 4:2.01+01a03-4
Severity: normal
Using testing, doing the lastest apt-get upgrade(on December 4th, 2005
at 5:22PM CST (-6), apt fails to upgrade cdrecord, and hangs
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstab
Hi again.
I forgot to add some more important info. After unsuccessful removing m-i-t
modprobe, insmod etc. are broken (broken paths) so adding/removing kernel
modules is no longer possible. Rebooting in this situation is very risky.
Xargos
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with
I don't have access to an iBook to test this. Does this happen even if ncpd is
not running ?
What happens if you do dpkg --unpack plptools_0.14-2_{ibook_architecture}.deb
and then manually copy the libplp into /usr/lib - does this affect the
keyboard ?
If you then copy ncpd into /usr/sbin - do
Package: cdebconf-gtk-udeb
Severity: normal
DirectFrameBuffer by default enables hardware acceleration whenever
possible, this resulted in a DFB crash on many PPC systems [1] .
DFB's HW acceleration should be disabled at runtime for those fb drivers
that are known to be actually broken.
Detecti
Package: subversion
Severity: minor
Version: 1.2.3dfsg1-2
$ svnadmin
--version hotcopy recover
create list-dblogs rmlocks
d list-unused-dblogs rmtxns
deltify loadsetlog
dumplslocks
On Sun, 04 Dec 2005 the mental interface of
Jesus Climent told:
[...]
> > - Optional: creates a playlist (M3U) file (lists MP3s created,
> > used by various MP3 players)
> > - Optional: Prepares and sends a CDDB submission.
> > - Optional: Saves the CDDB file.
>
> What are the advantage
Package: gparted
Version: 0.0.8-1
Severity: normal
This (together with inkscape) holds back the other apps depending on
libsigc++ and libglibmm.
Thanks,
Norbert
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
* Maciej Kalisiak [Sun, 04 Dec 2005 15:36:35 -0500]:
> (sorry about formatting, Vim was misbehaving):
:set paste
:set nopaste
:help 'paste
:help 'pastetoggle
HTH,
--
Adeodato Simó dato at net.com.org.es
Debian Developer
Package: dh-make
Version: 0.40
Severity: normal
Hi,
I see that /usr/share/debhelper/dh_make/debiank/rules
still uses a kdist_config target. make-kpkg appears
to call kdist_configure (now), so this boilerplate
should probably be updated.
cheers,
Ron
-- System Information:
Debian Release: testi
Package: libcegui-mk2-0
Version: 0.3.0-3
Severity: important
Tags: patch
The included patch makes the image-flipping occur only on images for which it
is necessary.
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (
On Sun, Dec 04, 2005 at 11:05:18PM +0100, Elimar Riesebieter wrote:
> Package: wnpp
> Severity: wishlist
> Owner: Elimar Riesebieter <[EMAIL PROTECTED]>
>
> * Package name: ripit
> Version : 3.4.0
> Upstream Author : Felix Suwald <[EMAIL PROTECTED]>
> * URL : http://www
On Sun, Dec 04, 2005 at 02:19:49PM -0800, Thomas Bushnell BSG wrote:
> I apologize; my previous explanation was incorrect.
> There is no bug here at all; I believe you simply must wait for the
> new ofx to be build for your architecture.
Actually, the problem is that gnucash needs to be built
On Sun, Dec 04, 2005 at 07:44:35PM +0100, Thijs Kinkhorst wrote:
> On Sun, December 4, 2005 18:22, Christer Mjellem Strand wrote:
> > After the SQL schemas were moved away from the doc dir, an upgrade
> > results in the following error message:
> >
> > zcat: /usr/share/phpbb2/schemas/mysql_schema.s
Hi,
Please find attached the French translation, proofread by the
debian-l10n-french mailing list contributors.
Regards,
--
Nicolas Haller
# smb2www HTML templates translations
# Copyright (C) 2005 Nicolas Haller
# Nicolas Haller <[EMAIL PROTECTED]>, 2005.
#
msgid ""
msgstr ""
"Project-Id-Versi
On Sun, Dec 04, 2005 at 04:16:25PM -0600, Richard Laager wrote:
> On Thu, 2005-12-01 at 13:47 -0500, Luke Schierer wrote:
> > - Forwarded message from Justin Pryzby <[EMAIL PROTECTED]> -
> >
> > Date: Thu, 1 Dec 2005 11:50:04 -0500
> > From: Justin Pryzby <[EMAIL PROTECTED]>
> > To: Debian
On 28.10.05 Frank Küster ([EMAIL PROTECTED]) wrote:
> Michael Piefel <[EMAIL PROTECTED]> wrote:
Hi Michael,
> > It appears that the purging of tetex should at some point have at least
> > hinted at the existence of tex-common.
>
> Why should it? I think most people would be rather annoyed by
>
Package: console-cyrillic
Version: 0.9-10
Severity: wishlist
Tags: patch l10n
Here is the swedish translation of the debconf template for
console-cyrillic.
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable')
Architectur
On 13.11.05 Sean Finney ([EMAIL PROTECTED]) wrote:
> On Sat, Nov 12, 2005 at 07:13:08PM +0100, Hilmar Preusse wrote:
Hi,
> > For third party software we have a policy. If anybody is willing
> > to maintain the package as a separate one, please open an RfP or
> > ITP bug against wnpp.
>
> it seem
I apologize; my previous explanation was incorrect.
There is no bug here at all; I believe you simply must wait for the
new ofx to be build for your architecture.
> This is particularly annoying because the failed install seems to have wiped
> out my previous working install.
What "failed in
1 - 100 of 349 matches
Mail list logo