Bug#293348: dovecot-imapd: New inetd.conf check doesn't work for all configurations.

[Jaldhar H. Vyas]

On Mon, 7 Feb 2005, Magnus Holmgren wrote:

 Hey! Now you broke *my* configuration! ;-)

Aargh!


 for p in \
   `sed -r s/^ *(([^:]+|\[[^]]+]|\*):)?(pop3s?|imaps?)[ \t].*/\3/;t;d \
   /etc/inetd.conf`
do
for q in \
 `sed -r s/^ *protocols[ \t]*=[ \t]*(([^\]*)|\(.*)\)/\2\3/;t;d \
 /etc/dovecot/dovecot.conf`
do
  if [ $p = $q ]; then
exit 0
  fi
done
 done



I've made a new upload with this fix.  (I just noticed that I
hadn't patched the stop action previously.  So I've moved things
around a bit.)  Hopefully this finally solves the problem.  Let me know if
it doesn't.

-- 
Jaldhar H. Vyas [EMAIL PROTECTED]
La Salle Debain - http://www.braincells.com/debian/


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293897: kB should be Kb

[Michael Piefel]

Am Sonntag, den 06.02.2005, 20:08 +0100 schrieb martin f krafft:
 Anyway, I would really hope that l10n be case-*in*sensitive!

You would hope so, but you would be disappointed. As far as gettext is
concerned, its all strings of octets. There is no way to tell gettext
that a change in an original message was just a fix for a typo. You have
to write your own little scripts to make things match again.

As for SI multipliers: deka is da (two letters!), hecto is h, kilo
is k. All lower-case.

Bye,
   Mike

-- 
|=| Michael Piefel
|=| Member of the Debian project

Bug#273957: min delayed 1

[Christian Kurz]

On [03/02/05 18:43], Robert Millan wrote:
 On Thu, Feb 03, 2005 at 06:43:52PM +0100, Christian Kurz wrote:
   Please also make it accept 0 for minimal value.  tfheen's queue supports 
   this.

  Well, that should already be possible. It's just not documented in the
  manpage or the help output. :-)

 Ah well, than it makes sense to document it :)

I think I've already changed at least the help message. But Thomas and I
will check it, when we make a new release.

   As for the maximum value, why imposing an arbitrary restriction?  Just 
   accept
   any value as long as the target queue accepts it.

  At least I believe that dput should impose a restriction with respect to
  the maximum value for delayed uploads. In my opinion dput should only
  allow values that are supported by the official delayed upload queues.
  It has been a tradition for me to have such checks in dput and I don't
  think this should be changed. But let's see what Thomas thinks about
  this one.

 The official delayed queue that run on ftp-master is not there anymore.

Well, but it's possible that official queues will be created again. At
least there are enough hosts maintained by Debian where an official
queue could be set up. But that's a topic for -devel and not the log of
this bugreport.

 Anyone can run a queue with whatever insane value per wants, so it doesn't
 make sense to impose a restriction in dput.

Sure, but dput doesn't and won't support a queue set up by anyone. The
decision which queues are supported will be made by us. Therefor it
makes sense to impose a restriction as we will only support the maximum
delayed days that sound reasonable to us. And I've yet to see a damn
good argument for a delayed upload to a 30-days. (I even think that
21-days is too much.)

 If you don't want dput's backend to fail with unexistant directory errors,
 then I suggest that you check for existance of directory before uploading.
 But in the case of password-based authentication this requires typing the
 password twice, which is a bit annoying.

And that's one nice reasons why it's a lot easier to check the command
line argument for uploading against a defined list of allowed values.
That way dput will never fail because the directory is missing. And
nobody will ever have to type his password twice.

Christian
-- 
   Debian Developer (http://www.debian.org)
1024D/B7CEC7E8 44BD 1F9E A997 3BE2 A44F  96A4 1C98 EEF3 B7CE C7E8


pgpQMLkloMza3.pgp
Description: PGP signature

Bug#293969: btlaunchmanycurses.bittornado has memleak

[Chris Niekel]

Package: bittornado
Version: 0.3.9b-1
Severity: normal

When I run btlaunchmanycurses.bittornado in a screen-window, it keeps
consuming more and more memory. I killed it when it reached over 500MB. It
was downloading a few torrents, when I restarted it, it was back to about 50MB.

I've seen it happen multiple times. Not sure if it depends on certain
torrents though.

-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (500, 'testing'), (50, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.4.27-2-686
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages bittornado depends on:
ii  python2.3.4-5An interactive high-level object-o

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293970: [INTL:nl] new Dutch po-debconf translation

[Luk Claes]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Package: bindgraph
Version: 0.1-2
Severity: wishlist
Tags: patch l10n
Please find attached the Dutch po-debconf translation. This translation
has been vetted by the review process of the debian-l10n-dutch team.
Please add it to your next package revision, it should be inserted in
your package build-tree as debian/po/nl.po, TIA.
Feel free to mail me if this file needs updating at some future date.
Cheers
Luk

-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.0 (GNU/Linux)
iD8DBQFCBx9J5UTeB5t8Mo0RAjn6AJ4jE9/FZun6KNddCFRAhXwY/my8WQCfTyCi
rZNJMACDEfxPqsrwayRFVA4=
=z5ll
-END PGP SIGNATURE-


bindgraph_0.1-2_nl.po
Description: application/gettext

Bug#293955: overwrites files with same name == id3 info without warning

[Michael Ablassmeier]

hi Frederic,

On Mon, Feb 07, 2005 at 03:53:03AM +0100, Frederic Krueger wrote:
 Package: streamripper
 Version: 1.61.3-1
 Severity: grave

can you please set a higher verbose level in your Bugreport and
complain what exactly the problem is? Thanks! 

bye,
- michael


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293897: kB should be Kb

[martin f krafft]

also sprach Michael Piefel [EMAIL PROTECTED] [2005.02.07.0859 +0100]:
 As for SI multipliers: deka is da (two letters!), hecto is h, kilo
 is k. All lower-case.

I am not talking about SI multipliers, or can you express a Byte
in SI units? I am talking about metric multipliers.

-- 
 .''`. martin f. krafft [EMAIL PROTECTED]
: :'  :proud Debian developer, admin, user, and author
`. `'`
  `-  Debian - when you have better things to do than fixing a system
 
Invalid/expired PGP subkeys? Use subkeys.pgp.net as keyserver!


signature.asc
Description: Digital signature

Bug#293425: libgtk2-ruby: With new libgtk2.6 there are problems in Gtk::EntryCompletion

[DaVinci]

El domingo 06 de febrero, Dafydd Harries escribió:
 Ar 03/02/2005 am 11:24, ysgrifennodd DaVinci:
 It doesn't show completion menu properly when there is more than one
 option and, althought rbbr shows method set_inline_completion, it
 doesn't work.
 
 Could you provide some code which demonstrates the bug? I'd like to try
 to pin down what's happening rather than just relying on GTK 2.6 to fix
 it. 2.4 and 2.6 should work interchangably, as I understand it.

 Here you have a little script:

-
#!/usr/bin/ruby

require 'gtk2'

class Combo  Gtk::ComboBoxEntry
def Combo.valor_defecto
nil
end

def initiaze
super()
end

def make_list(vals)
@vals = vals

model = Gtk::ListStore.new(String)
@vals.each do |v|
append_text(v)

iter = model.append
iter[0] = v
end

comp = Gtk::EntryCompletion.new
child.completion = comp

comp.model = model
comp.text_column = 0
self
end
end

Gtk.init

ventana = Gtk::Window.new
ventana.set_title(Problem with Gtk::ComboBoxEntry)
ventana.signal_connect('delete_event') {exit}

vbox = Gtk::VBox::new(true, 10)

combo = Combo.new.make_list(['uno', 'dos', 'tres', 'cuatro', 'cinco'])
vbox.pack_start(combo, true, true, 0)

boton = Gtk::Button.new('_close', true)
boton.signal_connect('clicked') do exit end
vbox.pack_start(boton, true, true, 0)

ventana.add(vbox)

ventana.show_all

Gtk.main
--

 If you type c in combo, it should show a list with two options:
 cuatro and cinco, but doesn't work. With Gtk2.4 same example worked
 without problem.

David

Bug#293971: Python2.3-dev dependency problem

[Kryczkowski Pawe]

Package: python2.3-dev
Version: 2.3.4-13

Hi

I wanted to install a python2.3-dev, but there seems to be a dependency problem.
Adding a package in dselect causes dependency warning and information:
python2.3-dev depends on python2.3 (= 2.3.4-13)
python2.3 conflicts with python2.3-dev ( 2.3.4-15)


Using kernel 2.6.6 on debian 3.1
Greetz
___
Pawe Kryczkowski

Bug#293568: gnome-themes-extras: no compressed archive icon in Nuvola theme

[Josselin Mouette]

Christian Surchi wrote:
Thanks. I considered minor because I didn't understand what can come the
problem from. Now I think that is more important in general because
theme should work!
This should be fixed in gtk+-2.0 2.6.2-2. However, the problematic file 
(/usr/share/icons/icon-theme.cache) is not removed upon upgrade, you'll 
have to remove it by yourself.

Regards,
--
 .''`.   Josselin Mouette/\./\
: :' :   [EMAIL PROTECTED]
`. `'[EMAIL PROTECTED]
  `-  Debian GNU/Linux -- The power of freedom
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293637: gdb: BFD : internal error

[A Mennucc]

hi

I was debugging my program 'gtkmorph' , which is linked to 'libmorph'

I ran gdb using 'libtool gdb' 



the same day I saw that error another time

a.

On Fri, Feb 04, 2005 at 02:46:21PM -0500, Daniel Jacobowitz wrote:
 On Wed, Feb 02, 2005 at 08:43:31PM +0100, A Mennucc wrote:
  Package: gdb
  Version: 6.3-5
  Severity: normal
  
  I got this from gdb
 vvv
  (gdb) run
  [blah blah my program runs ]
  Segmentation fault
  [ARRGGHH my program segfaults but I want to retry it]
  (gdb) run
  The program being debugged has been started already.
  Start it from the beginning? (y or n) y
  BFD: BFD 2.15.93 20041018 internal error, aborting at 
  /nevyn/local/gdb/gdb-6.3/bfd/cache.c line 495 in bfd_cache_lookup_worker
  
  BFD: Please report this bug.
 ^^
  
  I was unable to reproduce the problem so far, though
 
 Had you deleted, or made substantially smaller, any of the libraries or
 binaries that GDB had open?  Were there a large number of files open?
 
 I do see an abort there, and it looks pretty suspect, but I've never
 seen anyone hit it before.
 
 -- 
 Daniel Jacobowitz

-- 
Andrea Mennucc
 Ukn ow,Ifina llyfixe dmysp acebar.ohwh atthef


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293741: debian-installer-manual: PDF output it ugly, inconsistent with other Debian documentation

[Nikolai Prokoschenko]

On Feb 05, 2005 at 09:32:11AM -0500, Nick Lewycky wrote:
 After switching from debiandoc to jadetex, the Debian Installer manual
 PDF became rather ugly and different from the consistent look of other
 Debian documents such as the Debian Reference. In particular, it is
 using different fonts, the Table of Contents is not hyperlinked, the
 title page is Just Plain Ugly, and the page header runs well into the
 top margin.

This is being worked on. The problem is actually, that there is no
DFSG-free software out there that is capable of batch-generating PDFs in
good quality in all languages we'd like to support. The only feasible way
might be using LaTeX, for which I have some scripts in beta.  However, the
problem is still not solved completely, even if we have some nice looking
PDFs for most latin-based languages now 

To the matter of format change: as I see it, DebianDoc is an SGML format
while DocBook we are using currently is XML. I hope that we can produce a
good solution for PDFs soon, then we might as well propose a change
for the Debian Reference and the other documentation.

-- 
Nikolai Prokoschenko 
[EMAIL PROTECTED] / Jabber: [EMAIL PROTECTED]


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#267725: $B=i$a$^$7$F!"M}:;$G$9!#(B

[$BF#F2M}:;(B]

$B$O$8$a$^$7$F!#F#F2M}:;$H$^$9!#(B27$B:P$G$9!#(B
$B$"$J$?$N%W%m%U%#!<%k$r8+$?$H$3$m$*6a$/$K$*=;$^$$$N$h$&$G$7$?$7!"3Z$7$/$*IU$-9g$$$G$-$kJ}$rC5$7$F$F%a!<%k$7$^$7$?!#(B
(B[EMAIL PROTECTED]$K+8JR2p$5$;[EMAIL 
(BPROTECTED]:;$O7k:'Nq(B3$BG/$NM5$,$"$j$^$9!#(B
(B[EMAIL 
(BPROTECTED]/$l$?$i!!!$"$J$?$K%9%F%-$JLk$r%W%l%%s%H=PMh$k$h$$J5$$,$7$^$9!#(B
$B$b$A$m$s!"$=$N5$$,$"$C$?$i$G$9$1$l$I$b!#!#!#(B
(B[EMAIL PROTECTED]|2V$K;w$F$$$k$H$h$/[EMAIL 
(BPROTECTED],!"$"$=$3$^$G$OA{$,$7$/[EMAIL PROTECTED];W$C$F$^$9!#(B
$B9%$-$J;v$ONAM}(B($BFC$K[EMAIL 
(BPROTECTED](%C%HIJ$rHNGd$7$F$$$k2qR$G%+%?%m%0$NJT=8$r$d$C$F$$$^$9!#(B
$B5$$rD%$i$:$K%j%i%C%/%9$7$?4X78$G$$$i$l$F!"HkL)87$G$9!#(B
$B$3$s$J;d$G$9$,%G!<%H$KO"$l=P$7$F$b$i$($^$;$s$+!#(B
$BF/$$$F$^$9$,;~4V$NET9g$O$D$1$d$9$$$H;W$$$^$9!#(B
$B

Bug#269859: $B=i$a$^$7$F!"M}:;$G$9!#(B

[$BF#F2M}:;(B]

$B$O$8$a$^$7$F!#F#F2M}:;$H$^$9!#(B27$B:P$G$9!#(B
$B$"$J$?$N%W%m%U%#!<%k$r8+$?$H$3$m$*6a$/$K$*=;$^$$$N$h$&$G$7$?$7!"3Z$7$/$*IU$-9g$$$G$-$kJ}$rC5$7$F$F%a!<%k$7$^$7$?!#(B
(B[EMAIL PROTECTED]$K+8JR2p$5$;[EMAIL 
(BPROTECTED]:;$O7k:'Nq(B3$BG/$NM5$,$"$j$^$9!#(B
(B[EMAIL 
(BPROTECTED]/$l$?$i!!!$"$J$?$K%9%F%-$JLk$r%W%l%%s%H=PMh$k$h$$J5$$,$7$^$9!#(B
$B$b$A$m$s!"$=$N5$$,$"$C$?$i$G$9$1$l$I$b!#!#!#(B
(B[EMAIL PROTECTED]|2V$K;w$F$$$k$H$h$/[EMAIL 
(BPROTECTED],!"$"$=$3$^$G$OA{$,$7$/[EMAIL PROTECTED];W$C$F$^$9!#(B
$B9%$-$J;v$ONAM}(B($BFC$K[EMAIL 
(BPROTECTED](%C%HIJ$rHNGd$7$F$$$k2qR$G%+%?%m%0$NJT=8$r$d$C$F$$$^$9!#(B
$B5$$rD%$i$:$K%j%i%C%/%9$7$?4X78$G$$$i$l$F!"HkL)87$G$9!#(B
$B$3$s$J;d$G$9$,%G!<%H$KO"$l=P$7$F$b$i$($^$;$s$+!#(B
$BF/$$$F$^$9$,;~4V$NET9g$O$D$1$d$9$$$H;W$$$^$9!#(B
$B

Bug#293972: libgtk-perl: FTBFS (amd64/gcc-4.0): invalid lvalue in assignment

[Andreas Jochens]

Package: libgtk-perl
Severity: normal
Tags: patch

When building 'libgtk-perl' on amd64 with gcc-4.0,
I get the following error:

cc -c  -I/libgtk-perl-0.7009/Gnome/../Gtk/../blib/arch/Gtk/Install/ 
-I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include 
-D_REENTRANT  -I. -I./build 
-I/libgtk-perl-0.7009/Gnome/../GdkImlib/blib/arch/Gtk/Gdk/ImlibImage/Install/ 
-I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include 
-I/usr/X11R6/include -I/usr/include/gnome-1.0 -DNEED_GNOMESUPPORT_H 
-I/usr/lib/gnome-libs/include -I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 
-I/usr/lib/glib/include  -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS 
-DDEBIAN -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE 
-D_FILE_OFFSET_BITS=64-DVERSION=\0.7009\ -DXS_VERSION=\0.7009\ -fPIC 
-I/usr/lib/perl/5.8/CORE  -DPERL_POLLUTE -DLAZY_LOAD -DPGTK_THREADS 
-DGTK_HVER=0x01020a -DGNOME_HVER=0x010402 xs/Gnome.c
Gnome.xs: In function 'get_options':
Gnome.xs:249: error: invalid lvalue in assignment
make[2]: *** [xs/Gnome.o] Error 1
make[2]: Leaving directory `/libgtk-perl-0.7009/Gnome'

With the attached patch 'libgtk-perl' can be compiled
on amd64 using gcc-4.0.

Regards
Andreas Jochens

diff -urN ../tmp-orig/libgtk-perl-0.7009/Gnome/xs/Gnome.xs ./Gnome/xs/Gnome.xs
--- ../tmp-orig/libgtk-perl-0.7009/Gnome/xs/Gnome.xs2005-02-07 
08:48:15.227865339 +0100
+++ ./Gnome/xs/Gnome.xs 2005-02-07 08:45:19.480981418 +0100
@@ -245,8 +245,8 @@
SV **s;
 
o-argInfo = POPT_ARG_NONE;
-   if ((s=av_fetch(av, i, 0))  SvOK(*s))
-   longopt = (char*) o-longName = g_strdup(SvPV(*s, 
PL_na));
+   if ((s=av_fetch(av, i, 0))  SvOK(*s)) 
+   longopt = o-longName = g_strdup(SvPV(*s, PL_na));
if (longopt  (p=strchr(longopt, '|'))) { /* short option */
*p++ = 0;
o-shortName = *p;


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#227334: $B=i$a$^$7$F!"M}:;$G$9!#(B

[$BF#F2M}:;(B]

$B$O$8$a$^$7$F!#F#F2M}:;$H$^$9!#(B27$B:P$G$9!#(B
$B$"$J$?$N%W%m%U%#!<%k$r8+$?$H$3$m$*6a$/$K$*=;$^$$$N$h$&$G$7$?$7!"3Z$7$/$*IU$-9g$$$G$-$kJ}$rC5$7$F$F%a!<%k$7$^$7$?!#(B
(B[EMAIL PROTECTED]$K+8JR2p$5$;[EMAIL 
(BPROTECTED]:;$O7k:'Nq(B3$BG/$NM5$,$"$j$^$9!#(B
(B[EMAIL 
(BPROTECTED]/$l$?$i!!!$"$J$?$K%9%F%-$JLk$r%W%l%%s%H=PMh$k$h$$J5$$,$7$^$9!#(B
$B$b$A$m$s!"$=$N5$$,$"$C$?$i$G$9$1$l$I$b!#!#!#(B
(B[EMAIL PROTECTED]|2V$K;w$F$$$k$H$h$/[EMAIL 
(BPROTECTED],!"$"$=$3$^$G$OA{$,$7$/[EMAIL PROTECTED];W$C$F$^$9!#(B
$B9%$-$J;v$ONAM}(B($BFC$K[EMAIL 
(BPROTECTED](%C%HIJ$rHNGd$7$F$$$k2qR$G%+%?%m%0$NJT=8$r$d$C$F$$$^$9!#(B
$B5$$rD%$i$:$K%j%i%C%/%9$7$?4X78$G$$$i$l$F!"HkL)87$G$9!#(B
$B$3$s$J;d$G$9$,%G!<%H$KO"$l=P$7$F$b$i$($^$;$s$+!#(B
$BF/$$$F$^$9$,;~4V$NET9g$O$D$1$d$9$$$H;W$$$^$9!#(B
$B

Bug#293911: [INTL:el] Update of Greek translation

[Christian Perrier]

Quoting Konstantinos Margaritis ([EMAIL PROTECTED]):
 Package: shadow
 Severity: wishlist
 Tags: patch l10n
 
 Update to Greek translation (attached).


Thanks. I will probably include it in the next NMU of the package. I'm
currently waiting for the former NMU to reach to 10 days delay and ask
it to enter sarge. Then I'll upload another NMU with this translation
and a big rewite of the French translation, completely reviewed by the
team.




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293973: ggz-server: new upstream

[Alex Mauer]

Package: ggz-server
Severity: wishlist

There's a new version of ggz available; also, the web page in the
package description is out of date (but that goes along with the new
upstream)

-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.4.27-2-686-smp
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#231025: NVU Debian packages

[Francesco P. Lovergine]

On Sun, Feb 06, 2005 at 01:05:30PM +0100, giskard wrote:
 hi all,
 
 finally i made the .deb of nvu.
 source can be found at www.autistici.org/giskard/nvu
 ( i can not provide .deb becuase i run xorg on my box :( )
 version 0.80
 

http://maya.ba.issia.cnr.it/frankie/debian 
contains the complete package. Thanks giskard.


-- 
Francesco P. Lovergine


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293912: [INTL:el] Update to Greek translation

[Christian Perrier]

tags 293912 pending
thanks

Quoting Konstantinos Margaritis ([EMAIL PROTECTED]):
 Package: debconf
 Version: 1.4.30.11
 Severity: wishlist
 Tags: patch l10n
 
 Update to Greek translation (attached)

...:-)

Bug#266824: Sunbird package

[Alexander Sack]

Matt Taggart wrote:
Sunbird upstream just released version 0.2, maybe this would be a good 
candidate for the initial package?

What is the current status?
 

I packaged it once, but since the result was quite unusable I refrained 
from uploading it to the public. I will give 0.2 a try. Hope in one or 
two weeks a package will be ready for experimental. Thanks for the reminder!

--
GPG messages preferred. |  .''`.  ** Debian GNU/Linux **
Alexander Sack  | : :' :  The  universal
[EMAIL PROTECTED] | `. `'  Operating System
http://www.jwsdot.com/  |   `-http://www.debian.org/

--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293975: mozilla-firefox: vulnerable to IDN spoofing problems

[pabs]

Package: mozilla-firefox
Version: 1.0+dfsg.1-4
Severity: grave
Tags: security
Justification: user security hole

advisory: http://www.shmoo.com/idn/homograph.txt
demonstration: http://www.shmoo.com/idn/
highlights:
 I.Background
 
 International Domain Name [IDN] support in modern browsers allows attackers 
 to 
 spoof domain name URLs + SSL certs.
 III.  The details
 
 Proof of concept URL:
 
 http://www.shmoo.com/idn/
 
 Clicking on any of the two links in the above webpage using anything but IE 
 should result in a spoofed paypal.com webpage.

I confirm that this works on my sid machine.

 V.Workaround
 
 You can disable IDN support in mozilla products by setting 
 'network.enableIDN' 
 to false.

I can confirm this works, but the domain not found message says
http://www.paypal.com; cannot be found, so it isn't exactly a great
workaround.

 VI.   Vendor Responses

 Mozilla:  Working on finding a good long-term solution; provided clear 
 workaround for disabling IDN.

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (990, 'unstable'), (101, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.4.27-2-k7
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)

Versions of packages mozilla-firefox depends on:
ii  debianutils  2.11.2  Miscellaneous utilities specific t
ii  fontconfig   2.2.3-4 generic font configuration library
ii  libatk1.0-0  1.8.0-4 The ATK accessibility toolkit
ii  libc62.3.2.ds1-20GNU C Library: Shared libraries an
ii  libfontconfig1   2.2.3-4 generic font configuration library
ii  libfreetype6 2.1.7-2.3   FreeType 2 font engine, shared lib
ii  libgcc1  1:3.4.3-7   GCC support library
ii  libglib2.0-0 2.6.2-1 The GLib library of C routines
ii  libgtk2.0-0  2.6.1-2 The GTK+ graphical user interface 
ii  libidl0  0.8.3-1 library for parsing CORBA IDL file
ii  libjpeg626b-9The Independent JPEG Group's JPEG 
ii  libkrb53 1.3.6-1 MIT Kerberos runtime libraries
ii  libpango1.0-01.8.0-3 Layout and rendering of internatio
ii  libpng12-0   1.2.8rel-1  PNG library - runtime
ii  libstdc++5   1:3.3.5-8   The GNU Standard C++ Library v3
ii  libx11-6 4.3.0.dfsg.1-10 X Window System protocol client li
ii  libxext6 4.3.0.dfsg.1-10 X Window System miscellaneous exte
ii  libxft2  2.1.2-6 FreeType-based font drawing librar
ii  libxp6   4.3.0.dfsg.1-10 X Window System printing extension
ii  libxt6   4.3.0.dfsg.1-10 X Toolkit Intrinsics
ii  psmisc   21.5-1  Utilities that use the proc filesy
ii  xlibs4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu
ii  zlib1g   1:1.2.2-4   compression library - runtime

-- no debconf information
-- 
bye,
pabs


signature.asc
Description: This is a digitally signed message part

Bug#293976: gv: does not quote or handle filenames given to the shell when printing

[Tobias Stefan Richter]

Package: gv
Version: 1:3.6.1-5
Severity: grave
Justification: user security hole


gv does not handle filenames correctly. 
When trying to print a file with a space in it, I get:

$ gv 24\ stundenprotokoll.ps
Warning - Cannot open file '24', No such file or directory
Warning - Cannot open file 'stundenprotokoll.ps', No such file or directory
lp: nothing to print
Warning - Cannot open file '/home/tsr/gv_42073222_1_24', No such file or 
directory
Warning - Cannot open file 'stundenprotokoll.ps.tmp', No such file or directory
lp: nothing to print
$

The first message is from 'Print All' the second is a 'Print Marked'.

Using specially crafted filenames it is also possible to launch 
arbitrary programs under the invoking user's id. This is a security risk.

-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.4.26
Locale: LANG=en_US.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)

Versions of packages gv depends on:
ii  gs   8.01-5  Transitional package
ii  gs-gpl [gs]  8.01-5  The GPL Ghostscript PostScript int
ii  libc62.3.2.ds1-20GNU C Library: Shared libraries an
ii  libice6  4.3.0.dfsg.1-10 Inter-Client Exchange library
ii  libsm6   4.3.0.dfsg.1-10 X Window System Session Management
ii  libx11-6 4.3.0.dfsg.1-10 X Window System protocol client li
ii  libxext6 4.3.0.dfsg.1-10 X Window System miscellaneous exte
ii  libxmu6  4.3.0.dfsg.1-10 X Window System miscellaneous util
ii  libxpm4  4.3.0.dfsg.1-10 X pixmap library
ii  libxt6   4.3.0.dfsg.1-10 X Toolkit Intrinsics
ii  xaw3dg   1.5+E-8 Xaw3d widget set
ii  xlibs4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293974: icewm is not using the configuration created by icepref

[Jonas]

Package: icepref
Version: 1.1-17
Severity: grave
Justification: renders package unusable


icepref creates ~/.icewm/preferences
Icewm is not by default using that file, so configuration changes are 
not visible, and therefore icepref is practically useless for normal 
users.

I use debian unstable.

I suggest the icepref package is removed and replaced with for example 
icewmcp (icewm control panel) or icepref2.


-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i586)
Kernel: Linux 2.6.10-grsec
Locale: LANG=sv_SE.ISO-8859-15, LC_CTYPE=sv_SE (charmap=ISO-8859-1)

Versions of packages icepref depends on:
ii  icewm 1.2.20-1   wonderful Win95-OS/2-Motif-like wi
ii  icewm-common  1.2.20-1   wonderful Win95-OS/2-Motif-like wi
ii  python2.3.4-6An interactive high-level object-o
ii  python-gtk-1.20.6.12-2   GTK support module for Python

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293854: igal: Own ampersand wrongly escaped.

[Alexander Zangerl]

On Sun, 06 Feb 2005 12:46:13 +0100, Laurent Fousse writes:
The behaviour happened only after a recent upgrade and I didn't find
revision 9 of the debian package to see what changed, so no patch for
the moment.

no worries; i've cleaned up the mess and a new upload will happen within
an hour. sorry about that mistake.
(*sigh* if this was my own code, i'd have rewritten it completely 
by now. bolting new stuff onto this very messy piece of perl 
is becoming less and less fun...)

regards
az


-- 
+ Alexander Zangerl + DSA 42BD645D + (RSA 5B586291)
An ASCII character walks into a bar and orders a double.  Having a
bad day? asks the barman.  Yeah, I have a parity error, replies the
ASCII character.  The barman says, Yeah, I thought you looked a bit
off. -- Skud


pgpU0bzATPvTc.pgp
Description: PGP signature

Bug#277426: News about flumotion

[Jeff Waugh]

quote who=Pierre Machard

 I am writting you this email to know the status of flumotion. A friend
 of mine (in Cc:) is looking for this package.
 
 Do you have anything ready or a repository publicaly available ?

I'm doing testing packages in Ubuntu's hoary repository, they build against
sid and sarge. I will be changing the package fairly significantly before I
put it in Debian proper though. Didn't want to dump experimental stuff in if
it could be released with sarge. ;-)

- Jeff

-- 
linux.conf.au 2005: Canberra, Australiahttp://linux.conf.au/
 
So: Stop selling software. Give it away. Work out some other way to
   make money, because pretending it's not replicable is not it. Profit.
   - Martin Pool


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293977: powerpc: segfaults on normal startup

[Ingo Juergensmann]

Package: splitvt
Version: 1.6.5-7
Severity: important


After the fixed sparc segfault, splitvt now segfaults on powerpc when you
start it from a normal shell.
Surprisingly it runs without problems when you want to strace the reason for
the segfault. Funny. :-)

Regards,
Ingo

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.10
Locale: LANG=en_US, LC_CTYPE=de_DE (charmap=ISO-8859-1)

Versions of packages splitvt depends on:
ii  libc6   2.3.2.ds1-20 GNU C Library: Shared libraries an
ii  libncurses5 5.4-4Shared libraries for terminal hand

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#195948: about to upload DSPAM package

[Aurelien Labrosse EXT-CSRD-RSCG]

Hi,
which version do you plan to upload?
I sent patches and mail to this bug and never get any replies for 
pkg-dspam team.
I planned to upload dspam to unstable since december, and i'm now 
waiting for pkg-dspam too. My sponsor is ready too for the upload, and 
packages are ready to use for all backends and cgi web-interface.

Aurelien
--
Aurélien Labrosse EXT-CSRD-RSCG - France Telecom division RD (Grenoble) 
Tel: 83 24 89
--
TEAMLOG Montbonnot
10, Rue Lavoisier
38330 Montbonnot
Tèl: 04.76.61.62 / Fax: 04.76.61.62.61


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#277426: News about flumotion

[Pierre Machard]

Hi Jeff,

I am writting you this email to know the status of flumotion. A friend
of mine (in Cc:) is looking for this package.

Do you have anything ready or a repository publicaly available ?

Cheers,
-- 
Pierre Machard
[EMAIL PROTECTED] http://debian.org
GPG: 1024D/23706F87 : B906 A53F 84E0 49B6 6CF7 82C2 B3A0 2D66 2370 6F87



signature.asc
Description: Digital signature

Bug#287189: #287189 still a bug?

[Thomas Hood]

Was #287189 closed by mistake?  The original report (now reassigned to
initrd-tools) is that mkinitrd looks for /bin/discover.  According to
the changelog, the discover program is now at /sbin/discover.  So
presumably mkinitrd may still need to be fixed?
-- 
Thomas Hood [EMAIL PROTECTED]



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293008: Sarge Installation Report: succes, but strange tasksel behavior

[Peter Vandenabeele]

On Sun, Feb 06, 2005 at 09:02:19PM +0100, Frans Pop wrote:
 On Saturday 05 February 2005 15:05, Peter Vandenabeele wrote:
  * then in text mode, I saw messages similar to those above
  * and I got the question Do you want to continue? [Y/n/?]
 
 I have tried to reproduce this using both RC2 netinst and daily (20050205) 
 netinst CDs (medium priority).
 Whatever combination of tasks I select, I never get asked this question: 
 installation just proceeds:
 - the info on packages to be installed/upgraded is shown (none deleted,
   some held back)
 - no question is asked
 - the download of the first package starts

Saturday 5 Feb 2005, after running apt-get upgrade on another sarge PC
I also tried tasksel and even when I ask tasksel to 
install/remove/install/remove the Fileserver packages (that is samba, nfs, 
apple), aptitude never asked for any confirmation before installing or 
removing packages, which I find strange ...

So, I also was unable to reproduce that problem on another computer.

 The situation that may trigger the question could be if a package were to 
 be deleted, but as I said I can't reproduce that.
 
 Peter: if you can, we will need extremely exact information on:
 - what architecture you use
 - what installation method you use, exact version of the installer
 - priority of the installation
 - what you select as sources for apt in second stage
 - what tasks (and/or manual selection) you select in tasksel
 
 A copy of the base-config log would be useful as well.

I will try to provide that on Wednesday 7 Feb (from the Dutch-language
computer).

I plan to continue to use the exact original CD image (iso 1) that I 
downloaded on 22 Jan 2004 from the official site, or rather should
I download a new CD image ?

Maybe this afternoon, I will be able to give more info from another
install I plan to execute from this CD.

Thanks for your time,

Peter

 Cheers,
 FJP


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293575: horde2: Never ending MySQL connections

[Cyril Bouthors]

On 6 Feb 2005, Ola Lundqvist wrote:
 I'm still maintaining it, but I suspect that this issue may be a
 design flaw rather than a code error. But that is just my thought.

I really have no idea, I'm sorry I can't help you.

 I can report it but as you will be able to describe the problem much
 better than I do, I suggest that you do that. The mailinglist is
 available at http://www.horde.org/. I hope you do not mind.

Please just forward the bugreport to upstream and mark the bug as
forwarded to upstream.  This is the debian maintainer's job, not
mine.
-- 
Cyril Bouthors


pgp4H0WcWiHAQ.pgp
Description: PGP signature

Bug#293978: tin does not work with news.mozilla.org (freeze at the beginning)

[Vincent Lefevre]

Package: tin
Version: 1:1.7.6+rel-1
Severity: important

I've created an entry

news.mozilla.org.newsrc-mozilla mozilla

in my .tin/newsrctable file. But tin -ag mozilla gives:

tin 1.7.6 release 20040906 (Baleshare) [UNIX] (c) Copyright 1991-2004 Iain 
Lea.
secnews.netscape.com Netscape-Collabra/3.52 03615 NNRP ready (posting ok).
Your server does not have Xref: in its XOVER information.
Tin will try to use XHDR XREF instead (slows down things a bit).
Reading keymap file...
Reading input history file...
Reading mail active file... 
Try and save newsrc file again? (Y/n) Y

Then tin freezes.

-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (900, 'testing'), (200, 'unstable')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.9-powerpc
Locale: LANG=POSIX, LC_CTYPE=en_US.ISO8859-1 (charmap=ISO-8859-1)

Versions of packages tin depends on:
ii  debconf 1.4.30.11Debian configuration management sy
ii  libc6   2.3.2.ds1-20 GNU C Library: Shared libraries an
ii  libidn110.5.2-3  GNU libidn library, implementation
ii  libncursesw55.4-4Shared libraries for terminal hand
ii  libpcre34.5-1.1  Perl 5 Compatible Regular Expressi

-- debconf information:
* shared/news/server: localhost


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#78961: Fear meeting new people

[Celina Burton]

Call us on : l8OO 0rder N0W

or visit: http://www.vaigra.net


Regards
Celina Burton



- Original Message -
From: 78961
To: Celina Burton
Sent: Mon, 07 Feb 2005 10:14:01 +0100
Subject: Meds Forever


more? http://www.vaigra.net/H.php


You will find this useful:
 - http://www.vaigra.net

Bug#264157: [exim] Eximstats average message size

[Steve Campbell]

Gregor,
Thanks for your patch to display the average message sizes in eximstats.
There were a couple of bugs in it, as it only worked for message size 
totals under 1 GB, and broke merging of old reports.

I've incorporated your patch and fixed these issues in eximstats-1.36, 
which can be downloaded from www.computurn.com/exim.

Steve Campbell
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293980: udev: missing dependancy

[Matthieu Lagouge]

Package: udev
Version: 0.051-1
Severity: normal


udevd is not started if sysfsutils package is not installed.
Shouldn't udev depends on sysfsutils (or at least recommends it)?
Thanks by advance!

-- Package-specific info:
-- /etc/udev/rules.d/:
/etc/udev/rules.d/:
total 4
-rw-r--r--  1 root root 530 2005-02-05 17:54 00-local.rules
lrwxrwxrwx  1 root root  19 2005-02-07 10:48 cd-aliases.rules - 
../cd-aliases.rules
lrwxrwxrwx  1 root root  13 2005-02-07 10:48 udev.rules - ../udev.rules

-- /sys/:
/sys/block/hda/dev
/sys/block/hda/hda1/dev
/sys/block/hda/hda2/dev
/sys/block/hda/hda3/dev
/sys/block/hda/hda5/dev
/sys/block/hda/hda6/dev
/sys/block/hda/hda7/dev
/sys/block/hdc/dev
/sys/block/ram0/dev
/sys/block/ram10/dev
/sys/block/ram11/dev
/sys/block/ram12/dev
/sys/block/ram13/dev
/sys/block/ram14/dev
/sys/block/ram15/dev
/sys/block/ram1/dev
/sys/block/ram2/dev
/sys/block/ram3/dev
/sys/block/ram4/dev
/sys/block/ram5/dev
/sys/block/ram6/dev
/sys/block/ram7/dev
/sys/block/ram8/dev
/sys/block/ram9/dev
/sys/class/drm/radeon/dev
/sys/class/input/event0/dev
/sys/class/input/event1/dev
/sys/class/input/event2/dev
/sys/class/input/event3/dev
/sys/class/input/mice/dev
/sys/class/input/mouse0/dev
/sys/class/input/mouse1/dev
/sys/class/input/ts0/dev
/sys/class/input/ts1/dev
/sys/class/misc/agpgart/dev
/sys/class/misc/psaux/dev
/sys/class/misc/rtc/dev
/sys/class/printer/lp0/dev
/sys/class/sound/adsp/dev
/sys/class/sound/audio/dev
/sys/class/sound/controlC0/dev
/sys/class/sound/controlC1/dev
/sys/class/sound/controlC2/dev
/sys/class/sound/controlC3/dev
/sys/class/sound/dsp/dev
/sys/class/sound/mixer/dev
/sys/class/sound/pcmC0D0c/dev
/sys/class/sound/pcmC0D0p/dev
/sys/class/sound/pcmC0D1c/dev
/sys/class/sound/pcmC0D2c/dev
/sys/class/sound/pcmC0D3c/dev
/sys/class/sound/pcmC0D4p/dev
/sys/class/sound/seq/dev
/sys/class/sound/sequencer2/dev
/sys/class/sound/sequencer/dev
/sys/class/sound/timer/dev

-- Kernel configuration:


-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.9-1-686
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=UTF-8)

Versions of packages udev depends on:
ii  hotplug  0.0.20040329-16 Linux Hotplug Scripts
ii  initscripts  2.86.ds1-1  Standard scripts needed for bootin
ii  libc62.3.2.ds1-20GNU C Library: Shared libraries an
ii  makedev  2.3.1-75Creates device files in /dev
ii  sed  4.1.4-1 The GNU sed stream editor

-- debconf information excluded


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293979: bash: Patch proposal for completion on aptitude show pkgTAB

[nerf]

Package: bash
Version: 3.0-14
Severity: minor
Tags: patch

This patch adds |show in two lines to get aptitude show to behave
the same way as apt-cache show, ie complete filenames.

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.4.28
Locale: LANG=fr_FR, [EMAIL PROTECTED] (charmap=ISO-8859-15)

Versions of packages bash depends on:
ii  base-files  3.1.2Debian base system miscellaneous f
ii  libc6   2.3.2.ds1-20 GNU C Library: Shared libraries an
ii  libncurses5 5.4-4Shared libraries for terminal hand
ii  passwd  1:4.0.3-30.8 Change and administer password and

-- no debconf information
--- bash_completion 2005-02-07 11:00:29.0 +0100
+++ bash_completion.aptitude2005-02-07 10:59:59.0 +0100
@@ -2120,7 +2120,7 @@
 -Z -v --verbose'

for (( i=0; i  [EMAIL PROTECTED]; i++ )); do
-   if [[ ${COMP_WORDS[i]} == 
@(install|reinstall|hold|unhold|markauto|unmarkauto|dist-upgrade|download|forbid-version|purge|remove)
 ]];then
+   if [[ ${COMP_WORDS[i]} == 
@(install|reinstall|hold|unhold|markauto|unmarkauto|dist-upgrade|download|show|forbid-version|purge|remove)
   ]]; then
special=${COMP_WORDS[i]}
fi
#exclude some mutually exclusive options
@@ -2130,7 +2130,7 @@

if [[ -n $special ]]; then
   case $special in
-  @(install|hold|markauto|unmarkauto|dist-upgrade|download))
+  @(install|hold|markauto|unmarkauto|dist-upgrade|download|show))
   COMPREPLY=( $( apt-cache pkgnames $cur 2 /dev/null ) )
   return 0
   ;;

Bug#293983: Wrong variable name (old-passwords) in my.cnf

[Patrice Pawlak]

Package: mysql-common-4.1
Version: 4.1.9-2

The configuration file /etc/mysql/my.cnf for MySQL 4.1 comes with a wrong 
variable name: old-passwords should be replaced by old_passwords.

Not having this variable set prevent older clients from connecting to the 
server, which can be quite blocking in some configurations.

The list of MySQL server variables can be found at:
http://dev.mysql.com/doc/mysql/en/server-system-variables.html


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293982: udev: HOWTO for setting permissions

[Benot Dejean]

Package: udev
Version: 0.051-1
Severity: normal

Last update :

* Updated the rules files to include permissions.
The permissions files do not exist anymore.

So /etc/udev/permissions.d is no longer used.

/usr/share/doc/udev$ grep -r permission . - Nothing

How can i set the permissions i need with this latest udev version ?
Thanks.

-- Package-specific info:
-- /etc/udev/rules.d/:
/etc/udev/rules.d/:
total 0
lrwxrwxrwx  1 root root 19 2004-12-05 12:48 cd-aliases.rules - 
../cd-aliases.rules
lrwxrwxrwx  1 root root 13 2004-11-28 00:46 udev.rules - ../udev.rules
lrwxrwxrwx  1 root root 12 2005-01-26 16:22 z_hal-plugdev.rules - ../hal.rules

-- /sys/:
/sys/block/dm-0/dev
/sys/block/dm-1/dev
/sys/block/dm-2/dev
/sys/block/dm-3/dev
/sys/block/dm-4/dev
/sys/block/dm-5/dev
/sys/block/dm-6/dev
/sys/block/hda/dev
/sys/block/hda/hda1/dev
/sys/block/hda/hda2/dev
/sys/block/hda/hda3/dev
/sys/block/hda/hda4/dev
/sys/block/hda/hda5/dev
/sys/block/hda/hda6/dev
/sys/block/hda/hda7/dev
/sys/block/hdc/dev
/sys/block/ram0/dev
/sys/block/ram10/dev
/sys/block/ram11/dev
/sys/block/ram12/dev
/sys/block/ram13/dev
/sys/block/ram14/dev
/sys/block/ram15/dev
/sys/block/ram1/dev
/sys/block/ram2/dev
/sys/block/ram3/dev
/sys/block/ram4/dev
/sys/block/ram5/dev
/sys/block/ram6/dev
/sys/block/ram7/dev
/sys/block/ram8/dev
/sys/block/ram9/dev
/sys/class/adb/adb/dev
/sys/class/graphics/fb0/dev
/sys/class/input/event0/dev
/sys/class/input/event1/dev
/sys/class/input/event2/dev
/sys/class/input/event3/dev
/sys/class/input/event4/dev
/sys/class/input/event5/dev
/sys/class/input/event7/dev
/sys/class/input/mice/dev
/sys/class/input/mouse0/dev
/sys/class/input/mouse1/dev
/sys/class/input/mouse3/dev
/sys/class/input/ts0/dev
/sys/class/input/ts1/dev
/sys/class/input/ts4/dev
/sys/class/misc/agpgart/dev
/sys/class/misc/apm_bios/dev
/sys/class/misc/device-mapper/dev
/sys/class/misc/nvram/dev
/sys/class/misc/pmu/dev
/sys/class/misc/psaux/dev
/sys/class/misc/rtc/dev
/sys/class/sound/controlC0/dev
/sys/class/sound/pcmC0D0c/dev
/sys/class/sound/pcmC0D0p/dev
/sys/class/sound/timer/dev

-- Kernel configuration:
 isapnp_init not present.


-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.9-powerpc
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) (ignored: LC_ALL 
set to fr_FR.UTF-8)

Versions of packages udev depends on:
ii  hotplug  0.0.20040329-16 Linux Hotplug Scripts
ii  initscripts  2.86.ds1-1  Standard scripts needed for bootin
ii  libc62.3.2.ds1-20GNU C Library: Shared libraries an
ii  makedev  2.3.1-75Creates device files in /dev
ii  sed  4.1.4-1 The GNU sed stream editor

-- debconf information:
  udev/devfs-warning:
* udev/reboot-warning:


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#247057: still create logfile in /

[Wiesiek]

Hi
I just create new server with razor/dcc/spamassassin soft.
But razor still create logfile in /
Man page: # man 5 razor-agent.conf
says:

ATTRIBUTES
  Following attributes can be specified:
  razorhome
  Directory where Razor Agents look for files.  All files in 
razor-agent.conf without a full path will be relative to
  razorhome.  The default is /etc/razor/ for root, and 
~/.razor/ for every other user.  If razorhome does not
  exist, it will be created.

  logfile
  Log file for the Razor Agents.  The default is razor-agent.log.

That suggest logfile only filename without path.
I change my config file to this:
# cat razor-agent.conf

# See razor-agent.conf (5)
# Change this to 5 for safer classification of MIME attachments.  This will 
let more spam through
logic_method = 4
# Uncomment the next line for logging via syslog
#logfile = sys-syslog
logfile = /var/log/razor-agent.log
---

And now razor create logfile in /var/log/
--
I greet
Wieslaw

--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#291542: rcs: [source] warning: the use of `mktemp' is dangerous, better use `mkstemp'

[Jari Aalto]

| reopen 291542
| severity 291542 grave
| tags 291542 security sarge
| thanks
| 
| On Fri, Jan 21, 2005 at 05:58:10PM +, Mark Baker wrote:
|  Jari Aalto wrote:
|  
|  Severity: minor
|   
|  
|  Minor? It's a potential security hole, albeit not a serious one.
| 
| Hm, then why didn't you upgrade this to grave, and tag it security? This
| bug needs to be tracked, otherwise chances are that it'd slip in Sarge
| as your package is frozen.
|  
| Note: I didn't check out the actual claims to a vulnerability, just
| following the assassment of the maintainer.

I din't know that mkstemp compiling errors should be reported with
high priority.

Btw, it would be nice if the policy manual would point people to a
document that would list examples; what kind of errors could/should be
reported as security violations. There could be section like
compiling and mkstemp mentioned.

Jari


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293540: (no subject)

[manfred]

So, I think there's some redundant information in the following :-)
I did send a fax to myself and pasted everything that's in the logs. It's  
loglevel 4 in config.faxCapi

cheers
manfred
log/capi4hylafax:
Feb 07 11:37:21.65: [26904]: c2faxrecv - INFO: SESSION BEGIN 0318  
+49.9651.917239
Feb 07 11:37:21.65: [26904]: c2faxrecv - INFO: Incoming fax call on  
controller 1 to 917239.
Feb 07 11:37:31.32: [26904]: c2faxrecv - INFO: Connection established.
Feb 07 11:37:31.32: [26904]: c2faxrecv - INFO:  StationID = +49 9651 917239
Feb 07 11:37:31.32: [26904]: c2faxrecv - INFO:  BaudRate  = 64000
Feb 07 11:37:31.32: [26904]: c2faxrecv - INFO:  Flags = HighRes,  
MMR_compr
Feb 07 11:37:31.32: [26904]: c2faxrecv - INFO: Write fax in path  
/var/spool/hylafax to file recvq/fax00200.tif.
Feb 07 11:37:34.18: [26904]: c2faxrecv - INFO: Page 1 was received. - Last  
Page!
Feb 07 11:37:37.20: [26904]: c2faxrecv - INFO: Fax received and calling  
'/var/spool/hylafax/bin/faxrcvd recvq/fax00200.tif faxCAPI 0318  
 +49 9651 917239  917239'.
Feb 07 11:37:38.76: [26904]: c2faxrecv - INFO: Connection is droped with  
reason 0x3400 (No additional information).
Feb 07 11:37:38.76: [26904]: c2faxrecv - INFO: SESSION END

log/xferfaxlog:
02/07/05 11:37  SEND0317faxCAPI 65 
[EMAIL PROTECTED]  123456+00 1234 123456   267 1
0:190:09
02/07/05 11:37  RECV0318faxCAPI   fax  
123456+00 1234 123456   267 1   0:160:06

syslog:
Feb  7 11:37:20 main isdnlog: Feb 07 11:37:20 * tei 91 calling ? with ?   
BEARER: 3.1 kHz audio, CCITT standardized coding
Feb  7 11:37:20 main isdnlog: Feb 07 11:37:20 * tei 91 calling ? with ?   
64 kbit/s, Circuit mode
Feb  7 11:37:20 main isdnlog: Feb 07 11:37:20 * tei 91 calling ? with ?   
G.711 A-law
Feb  7 11:37:20 main isdnlog: Feb 07 11:37:20 * tei 91 calling ? with ?   
CHANNEL: BRI, any channel
Feb  7 11:37:20 main isdnlog: Feb 07 11:37:20 * tei 91 calling +00  
1234/123456, City with +00 1234/123456, City  RING (3.1 kHz audio)
Feb  7 11:37:20 main isdnlog: Feb 07 11:37:20 * tei 91 calling +00  
1234/123456, City with +00 1234/123456, City  HLC: CCITT, Fax Gr.2/3  
(F.182)
Feb  7 11:37:21 main isdnlog: Feb 07 11:37:21 * tei 91 calling +00  
1234/123456, City with +00 1234/123456, City  CHANNEL: BRI, B1 needed
Feb  7 11:37:21 main isdnlog: Feb 07 11:37:21 * Call to tei 127 from ? on  
?  BEARER: 3.1 kHz audio, CCITT standardized coding
Feb  7 11:37:21 main isdnlog: Feb 07 11:37:21 * Call to tei 127 from ? on  
?  64 kbit/s, Circuit mode
Feb  7 11:37:21 main isdnlog: Feb 07 11:37:21 * Call to tei 127 from ? on  
?  G.711 A-law
Feb  7 11:37:21 main isdnlog: Feb 07 11:37:21 * Call to tei 127 from ? on  
?  CHANNEL: BRI, B2 needed
Feb  7 11:37:21 main isdnlog: Feb 07 11:37:21 * Call to tei 127 from ? on  
+00 1234/123456, City  RING (3.1 kHz audio)
Feb  7 11:37:21 main isdnlog: Feb 07 11:37:21 * Call to tei 127 from ? on  
+00 1234/123456, City  HLC: CCITT, Fax Gr.2/3 (F.182)
Feb  7 11:37:21 main kernel: capidrv-1: incoming call ,2,2,917239
Feb  7 11:37:21 main isdnlog: Feb 07 11:37:21   Call to tei 127 from ? on  
+00 1234/123456, City  COLP +00 1234/123456, City
Feb  7 11:37:21 main isdnlog: Feb 07 11:37:21   Call to tei 91 from ? on  
+00 1234/123456, City  CONNECT (3.1 kHz audio)
Feb  7 11:37:21 main kernel: isdn_net: Incoming call without OAD, assuming  
'0'
Feb  7 11:37:21 main kernel: isdn_tty: Incoming call without OAD, assuming  
'0'
Feb  7 11:37:21 main kernel: isdn_tty: call from 0 - 917239 ignored
Feb  7 11:37:21 main kernel: capidrv-1: incoming call ,2,2,917239 ignored
Feb  7 11:37:22 main isdnlog: Feb 07 11:37:22 tei 91 calling +00  
1234/123456, City with +00 1234/123456, City  Time:Mon Feb  7 11:37:00 2005
Feb  7 11:37:22 main isdnlog: Feb 07 11:37:22 tei 91 calling +00  
1234/123456, City with +00 1234/123456, City  COLP *INVALID* -- ignored!
Feb  7 11:37:22 main isdnlog: Feb 07 11:37:22 tei 91 calling +00  
1234/123456, City with +00 1234/123456, City  CONNECT (3.1 kHz audio)
Feb  7 11:37:22 main isdnlog: Feb 07 11:37:22 tei 91 calling +00  
1234/123456, City with +00 1234/123456, City  CHARGE: 5.997 ¢/90s = 3.998  
¢/Min (DTAG T-ISDN Standard, City, Workday (Monday), Tag)
Feb  7 11:37:22 main isdnlog: Feb 07 11:37:22 tei 91 calling +00  
1234/123456, City with +00 1234/123456, City  HINT: Better use 01019:01019  
CbC, 1.450 ¢/60s = 1.450 ¢/Min, saving 2.998 ¢/Min
Feb  7 11:37:22 main isdnlog: Feb 07 11:37:22 tei 91 calling +00  
1234/123456, City with +00 1234/123456, City  1.CI 5.997 ¢ (now)
Feb  7 11:37:22 main isdnlog: Feb 07 11:37:22 tei 91 calling +00  
1234/123456, City with +00 1234/123456, City  NEXT CI AFTER 01:30 (DTAG  
T-ISDN Standard, City, Workday (Monday), Tag)
Feb  7 11:37:22 main kernel: capilib_new_ncci: kcapi: appl 4 ncci 0x10101  
up
Feb  7 11:37:31 main kernel: capilib_new_ncci: kcapi: appl 3 ncci 0x20201  
up
Feb  7 11:37:36 main kernel: 

Bug#242809: ITA: quintuple-agent -- Secure store for secrets (passphrases, etc.)

[Norbert Tretkowski]

As discussed with Tollef on IRC, I'm taking over this ITA and upload a
new package next weekend.

Norbert


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293984: Typo and a wrong URL

[Uwe Zeisberger]

Package: svn-buildpackage
Version: 0.5.12
Severity: minor
File: /usr/share/doc/svn-buildpackage/HOWTO.html

Hello,

in section 4.3 (Working with source) of the svn-buildpackage HOWTO is
stated, that dpkg-buildpackage won't let you proceed if there are
suspicious files.  This should read svn-buildpackage won't 

In Chapter 6, section 1 Various links the local link to the subversion
book is broken, as (at least in/since subversion 1.1.3-1) the filename
is svn-book.html and not book.html.  I think it is sound to correct the
link, because subversion 1.1.3-1 is already in testing, but maybe filing
a bug report against subversion is sensible, too.

Regards
Uwe

-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (900, 'testing'), (300, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.9
Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages svn-buildpackage depends on:
ii  devscripts2.8.10 Scripts to make the life of a Debi
ii  perl  5.8.4-5Larry Wall's Practical Extraction
ii  subversion1.1.3-1advanced version control system (a
ii  subversion-tools  1.1.3-1assorted tools related to Subversi



-- 
Uwe Zeisberger

main(){char*a=main(){char*a=%c%s%c;printf(a,34,a,34%c;printf(a,34,a,34
,10);a=,10);a=%c%s%c;printf(a,34,a,34,10);}%c;printf(a,34,a,34,10);}


signature.asc
Description: Digital signature

Bug#280701: Bug #280701 - uptimed: Fails to email when passing top ten record runtimes

[Daniel Gubser]

 Problem is, the test is backward - the expression should read:
 
   (!position || (position = mail_min_position)

I just tried this but still not receive any mails...

Daniel



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293988: gpdf: Ctrl++ and Cntrl+- should work under the fullscreen view

[Cyril Bouthors]

Package: gpdf
Version: 2.8.2-1.1
Severity: wishlist

Hello,

Zoom In (Ctrl++) and Zoom Out (Cntrl+-) should work under the
fullscreen view.

Thanks.

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.10-1-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages gpdf depends on:
ii  libart-2.0-2 2.3.17-1Library of functions for 2D graphi
ii  libatk1.0-0  1.8.0-4 The ATK accessibility toolkit
ii  libbonobo2-0 2.8.0-4 Bonobo CORBA interfaces library
ii  libbonoboui2-0   2.8.0-2 The Bonobo UI library
ii  libc62.3.2.ds1-20GNU C Library: Shared libraries an
ii  libfreetype6 2.1.7-2.3   FreeType 2 font engine, shared lib
ii  libgcc1  1:3.4.3-7   GCC support library
ii  libgconf2-4  2.8.1-4 GNOME configuration database syste
ii  libglade2-0  1:2.4.1-2   library to load .glade files at ru
ii  libglib2.0-0 2.6.2-1 The GLib library of C routines
ii  libgnome2-0  2.8.0-6 The GNOME 2 library - runtime file
ii  libgnomecanvas2-02.8.0-1 A powerful object-oriented display
ii  libgnomeprint2.2-0   2.8.2-1 The GNOME 2.2 print architecture -
ii  libgnomeprintui2.2-0 2.8.2-2 GNOME 2.2 print architecture User
ii  libgnomeui-0 2.8.0-3 The GNOME 2 libraries (User Interf
ii  libgnomevfs2-0   2.8.3-11The GNOME virtual file-system libr
ii  libgtk2.0-0  2.6.1-2 The GTK+ graphical user interface
ii  libice6  4.3.0.dfsg.1-10 Inter-Client Exchange library
ii  liborbit21:2.10.2-1.1libraries for ORBit2 - a CORBA ORB
ii  libpango1.0-01.8.0-3 Layout and rendering of internatio
ii  libpaper11.1.14-3Library for handling paper charact
ii  libpopt0 1.7-5   lib for parsing cmdline parameters
ii  libsm6   4.3.0.dfsg.1-10 X Window System Session Management
ii  libstdc++5   1:3.3.5-8   The GNU Standard C++ Library v3
ii  libxml2  2.6.16-2GNOME XML library
ii  xlibs4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu
ii  zlib1g   1:1.2.2-4   compression library - runtime

-- no debconf information

-- 
Cyril Bouthors


pgpfmbaqFPmwp.pgp
Description: PGP signature

Bug#293986: ITP: rubilicious -- the Delicious (http://del.icio.us/) bindings for Ruby

[Nobuhiro IMAI]

Package: wnpp
Severity: wishlist

* Package name: rubilicious
  Version : 0.1.3
  Upstream Author : Paul Duncan [EMAIL PROTECTED]
* URL or Web page : http://pablotron.org/software/rubilicious/
* License : BSD
  Description : the Delicious (http://del.icio.us/) bindings for Ruby

 This package contains the delicious (http://del.icio.us/) bindings for
 Ruby language.
 .
 You can add urls with some comments and tags, fetch what you or others posted
 filtered by tags or date, rename tags and delete urls you posted.
 .
 Homepage: http://pablotron.org/software/rubilicious/


License is BSD-style:

Copyright (C) 2004 Paul Duncan

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the Software), to
deal in the Software without restriction, including without limitation the
rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
sell copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in
all copies of the Software, its documentation and marketing  publicity
materials, and acknowledgment shall be given in the documentation, materials
and software packages that this Software was used.

THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.


And I'm seeking a sponsor to upload this package for me.
--
Nobuhiro IMAI [EMAIL PROTECTED]
Key fingerprint = F39E D552 545D 7C64 D690  F644 5A15 746C BD8E 7106


pgpwYnFBh6v7Z.pgp
Description: PGP signature

Bug#293985: traceroute6 -v segfaults do to misparsing of incoming icmp's

[Jeroen Massar]

Package: iputils-tracepath
Version: 3:20020927-2
Severity: important

[EMAIL PROTECTED]:~$ traceroute6 -vn www.kame.net
traceroute to www.kame.net (2001:200:0:8002:203:47ff:fea5:3085) from
2001:838:1:1:210:dcff:fe20:7c7c, 30 hops max, 16 byte packets
 1  2001:838:1:1::1  0.39 ms  0.334 ms  0.332 ms
 2  2001:838:0:12::1  31.13 ms  4.359 ms  4.553 ms
 3  2001:838:0:11::1  5.006 ms  4.966 ms  5.818 ms
 4  2001:7f8:1::a502:4587:1  5.19 ms  5.161 ms  5.185 ms
 5  2001:1460:2000::1  6.015 ms  5.769 ms  5.956 ms
 6  2001:1460:2000:1::58  5.624 ms  5.972 ms  5.819 ms
 7  2001:5a0:200::11  7.219 ms  7.32 ms  7.275 ms
 8  2001:5a0:300::1  124.74 ms
64 bytes from fa9b:d00:: to ::: icmp type 128 ((null)) code 0
40: x0011
44: x42074a8d
48: x000d9bfa
52: x
56: x
60: x

16 bytes from fa9b:d00:: to ::: icmp type 128 ((null)) code 0
  124.459 ms  124.746 ms
 9  2001:288:3b0::55  151.702 ms  153.318 ms  151.151 ms
10  3ffe:b00:c18::6b  205.334 ms
Segmentation fault

This is most likely caused by a number of offset problems, or even
parsing of IPv4 icmp's. It could be related to the 2.6 kernel too
seeing that the iputils package predates it.

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.10-sixxs
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages iputils-tracepath depends on:
ii  libc6   2.3.2.ds1-20 GNU C Library: Shared libraries an

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293853: galeon-common: Please split the package into galeon-common and galeon-help

[Cyril Bouthors]

On 7 Feb 2005, Loc Minier wrote:

 Let me know if you understand this decision

Not quite.

What would be the real cost of splitting the package into
galeon-common and galeon-help?

Here's my guess:

 - put usr/share/gnome/help into debian/gnome-help.dirs;

 - add mv debian/gnome-{data,help}/usr/share/gnome/help to
   debian/rules;

 - add a Recommends: (...), galeon-help to debian/control;

 - add a galeon-help section to debian/control based on gnome-data
   (copy/paste).

Is this too expensive?
-- 
Cyril Bouthors


pgpBIBsnWoVAd.pgp
Description: PGP signature

Bug#283860: Bug#293699: fet

[GOTO Masanori]

At Sat, 05 Feb 2005 14:07:52 +0200,
Radu Spineanu wrote:
 reopen 283860
 merge 293699 283860
 thanks
 
 Seems the buildd still failed.

I think it makes sense that reassigning this bug to kernel package or
buildd team.

Regards,
-- gotom



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#231748: libc6-dev: programs using HUGE_VAL will issue a warning when compiled with -pedantic on the g++-3.3

[GOTO Masanori]

reassign 231748 gcc
thanks

At Sun, 08 Feb 2004 19:13:12 +0100,
Thomas Richter wrote:
 A program using HUGE_VAL will compile with a warning when compiled with 
 g++-3.3 -pedantic (g++-3.3 (GCC) 3.3.2 (Debian)).
 
 How to reproduce:
 
 Save the following program as test.cpp.
 
 /* snip */
 
 #include math.h
 
 int main(int argc,char **argv)
 {
double x = HUGE_VAL;
 
return 0;
 }
 
 /* snip */
 
 compile it as follows:
 
 $ g++-3.3 -pedantic test.cpp
 
 g++ will issue the following warning:
 
 test.cpp:5:14: Warnung: use of C99 hexadecimal floating constant

At Sat, 05 Feb 2005 17:34:40 +0100,
Petter Reinholdtsen wrote:
 I ran into the same problem when trying to compile mapserver with
 -pedantic using gcc 3.3.5.  Not sure how to solve the problem, but
 this bug make it hard to convince the mapserver developers to use
 -pendantic.  I want to convince them to add more warnings flags in a
 try to get the code ready for all the archs in Debian, and it gets
 harder when bogus warnings are emited from the compiler. :/

This issue has been discussed with:

http://gcc.gnu.org/bugzilla/show_bug.cgi?id=16977
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=11931
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=7263

I reassign it to gcc.  Gcc maintainers, if your discussion will be
finally decided, and glibc should be fixed, please let me know.

Regards,
-- gotom



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293653: libc6.1: getcontext does not seem to be implemented on alpha

[GOTO Masanori]

tags 293653 fixed-upstream
thanks

At Fri, 04 Feb 2005 22:04:34 +0100,
mquinson wrote:
 
 Package: libc6.1
 Version: 2.3.2.ds1-20
 Severity: important
 
 When I try to use getcontext(2) on alpha, errno gets set to 78 (Function
 not implemented).
 
 I'm rather puzzeled since the first hit of getcontext alpha linux is
 http://sources.redhat.com/ml/libc-alpha/2004-01/msg00244.html
 
 
 * From: Richard Henderson rth at twiddle dot net
 * To: libc-alpha at gcc dot gnu dot org
 * Date: Thu, 15 Jan 2004 21:10:21 -0800
 * Subject: [alpha] getcontext et al
 
 The recent ppc work reminded me that I'd forgotten to implement
 these at all.  Lazy me.
 
 Committed.
 
 (and the patches follow)
 
 Can it be that this one-year old upstream change slept thought in Debian?

Yes.  Our code base is very old.

Regards,
-- gotom


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#289470: totem

[Guilherme de S. Pastore]

This bug doesn't happen to one person only. I'm sorry, it had been
happening to me for some time, but only today did I have time to write
a bug report (and, well, notice someone had already reported it).

This bug's severity should, IMHO, be at least 'serious'.

If there's any useful information I can provide (that hasn't been
provided yet, heh), just ask =)

Best regards,

-- 
Guilherme de S. Pastore (fatalerror)
[EMAIL PROTECTED]


Nunca confie em dinheiro que tenha gente em trajes menores, 
principalmente se for indio.
-- Ivan Lessa 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293989: xsl stylesheet does not work anymore

[Wichert Akkerman]

Package: db2latex-xsl
Version: 0.8pre1-2
Severity: grave

I am suddenly getting this on every run:

[typhoon;..nTest/trunk/newdoc]-100 make manual.tex
xsltproc --output manual.tex manual.xsl manual.xml
compilation error: file 
file:///usr/share/xml/docbook/stylesheet/db2latex/latex/qandaset.mod.xsl line 
366 element template
xsl:template: error duplicate name 'question.answer.label'
make: *** [manual.tex] Error 5
zsh: exit 2 make manual.tex

Wichert.


-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.9
Locale: LANG=C, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293990: asterisk: fails to load chan_zap.so

[Klemens Kasemaa]

Package: asterisk
Version: 1:1.0.5-1
Severity: normal


[chan_zap.so]Feb  7 13:26:38 WARNING[1091]: loader.c:258 ast_load_resource: 
/usr/lib/asterisk/modules/chan_zap.so: undefined symbol: pri_dump_info
Feb  7 13:26:38 WARNING[1091]: loader.c:440 load_modules: Loading  module 
chan_zap.so failed!

and then asterisk fails to start

probably because of updated libpri1

rgrds,
klem

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.10-1-686
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages asterisk depends on:
ii  asterisk-config   1:1.0.5-1  config files for asterisk
ii  asterisk-sounds-main  1:1.0.5-1  sound files for asterisk
ii  libasound21.0.8-1ALSA library
ii  libc6 2.3.2.ds1-20   GNU C Library: Shared libraries an
ii  libedit2  2.9.cvs.20040827-1 BSD editline and history libraries
ii  libgsm1   1.0.10-13  Shared libraries for GSM speech co
ii  libncurses5   5.4-4  Shared libraries for terminal hand
ii  libpq37.4.7-1PostgreSQL C client library
ii  libpri1   1.0.4-1Primary Rate ISDN specification li
ii  libspeex1 1.1.6-1The Speex Speech Codec
ii  libssl0.9.7   0.9.7e-3   SSL shared libraries
ii  libtonezone1  1:1.0.2-2  tonezone library (runtime)
ii  unixodbc  2.2.4-11   ODBC tools libraries
ii  zlib1g1:1.2.2-4  compression library - runtime

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293991: Changes to fiaif-scan

[Klaus Ethgen]

Package: fiaif
Version: 1.19.2-10
Severity: normal
Tags: patch

There are two changes:
1. /etc/cron.daily/fiaif-scan - Mare it working with ulog and newer
   logtail (-f and -o)
2. /usr/sbin/fiaif-scan - Allow a space bevore 'IN'

-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (800, 'testing'), (70, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.4.29
Locale: LANG=de_DE, LC_CTYPE=de_DE (charmap=ISO-8859-1) (ignored: LC_ALL set to 
de_DE)

Versions of packages fiaif depends on:
ii  bash 2.05b-24The GNU Bourne Again SHell
ii  coreutils5.2.1-2 The GNU core utilities
ii  cron 3.0pl1-86   management of regular background p
ii  debconf  1.4.30.11   Debian configuration management sy
ii  debianutils  2.8.4   Miscellaneous utilities specific t
ii  dnsutils 1:9.2.4-1   Clients provided with BIND
ii  grep 2.5.1.ds1-4 GNU grep, egrep and fgrep
ii  iptables 1.2.11-8Linux kernel 2.4+ iptables adminis
ii  logtail  1.2.34  Print log file lines that have not
ii  net-tools1.60-10 The NET-3 networking toolkit
ii  sed  4.1.2-8 The GNU sed stream editor
ii  wget 1.9.1-8 retrieves files from the web

-- debconf information:
* fiaif/cron_logfile:
* fiaif/warning:
* fiaif/enable_cron: true
* fiaif/enable_initd: true

-- 
Klaus Ethgenhttp://www.ethgen.de/
pub  2048R/D1A4EDE5 2000-02-26 Klaus Ethgen [EMAIL PROTECTED]
Fingerprint: D7 67 71 C4 99 A6 D4 FE  EA 40 30 57 3C 88 26 2B
#!/bin/sh
# put this file in /etc/cron.daily to receive daily firewall logs
/usr/sbin/logtail -f/var/log/ulog/syslogemu.log 
-o/var/log/ulog/syslogemu.log.fiaif.offset | \
  /usr/sbin/fiaif-scan -n
#!/bin/bash
#
# FIAIF is an Intelligent firewall, version: $Revision: 1.21 $
#
# description: Convert syslog entries logged by FIAIF to human readable form.
#
# Script Author:Anders Fugmann afu at fugmann dot net
# 
# FIAIF is an Intelligent firewall
# Copyright (C) 2002-2003 Anders Peter Fugmann
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.

shopt -s extglob

source /usr/share/fiaif/constants.sh
source /etc/fiaif/fiaif.conf 
source /usr/share/fiaif/iptables.sh
source /usr/share/fiaif/functions.sh
source /usr/share/fiaif/zones.sh

function scan ()
{
local LINE=$@
local REASON DATE DEV_IN DEV_OUT MAC SRC DST PROTO SPT DPT TYPE TCP_FLAGS

declare -a TMP_ARRAY=( $@ )
DATE=${TMP_ARRAY[0]} ${TMP_ARRAY[1]} ${TMP_ARRAY[2]}
REASON=${TMP_ARRAY[5]%:*}
DEV_IN=${TMP_ARRAY[5]#*=}
DEV_OUT=${TMP_ARRAY[6]#*=}

local I
TCP_FLAGS=
for (( I=8;I${#TMP_ARRAY[*]};I++ )); do
# Dont process ICMP packets
if [[ -z ${TMP_ARRAY[I]%[*} ]]; then
break
fi

if [[ ${TMP_ARRAY[I]%=*} != ${TMP_ARRAY[I]#*=} ]]; then
declare ${TMP_ARRAY[I]%=*}=${TMP_ARRAY[I]#*=} 
else
if [[ ${TMP_ARRAY[I]} != DF ]]; then 
TCP_FLAGS=${TCP_FLAGS}${TMP_ARRAY[I]} 
fi
fi

done

echo -ne $DATE: ${REASON} queue=
#Convert device to zones.
get_zone_name ${DEV_IN} ${SRC}
ZONE_IN=${RESULT}
get_zone_name ${DEV_OUT} ${DST}
ZONE_OUT=${RESULT}

local CHAIN 
if [[ -n ${DEV_IN} ]]; then 
if [[ -n ${DEV_OUT} ]]; then
CHAIN=FORWARD
echo -n FORWARD(${ZONE_IN}-${ZONE_OUT}) 
else 
echo -n INPUT(${ZONE_IN}) 
CHAIN=INPUT
fi  
elif [[ -n ${DEV_OUT} ]]; then
CHAIN=OUTPUT
echo -n OUTPUT(${ZONE_OUT}) 
fi

if [[ -n ${PROTO} ]]; then
echo -n  protocol=${PROTO}
fi

if (( RESOLVE == 1 )); then
get_host_name ${SRC}
SRC=${RESULT}
get_host_name ${DST}
DST=${RESULT}
fi

if (( SERVICE == 1 ))  [[ ${PROTO} == TCP || ${PROTO} == UDP ]]; 
then
get_service_name ${PROTO} ${SPT} 
SPT=${RESULT}   
get_service_name ${PROTO} ${DPT} 
DPT=${RESULT}
fi

if [[ -n ${SRC} ]]; then
echo -n  source=${SRC}
if [[ -n ${SPT} ]]; then
echo 

Bug#287960: putty: FTBFS (amd64/gcc-4.0): pointer targets in passing argument 2 of 'hmacmd5_key' differ in signedness

[Jacob Nevins]

Some similar changes have been made in the upstream CVS code to keep the
Mac compiler happy. I haven't checked them against your proposals.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#288456: libcommons-codec-java: Missing documentation?

[Arnaud Vandyck]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Mon, 3 Jan 2005 22:17:29 +0100, 
Kurt Roeckx [EMAIL PROTECTED] wrote: 

 I think the package is missing it's documentation.  During the
 build I see this:
[...]
 The resulting deb doesn't any anything in docs/api either.

Sorry for the delay. A new gjdoc should come with a new kaffe
package. I'll try to generate the doc with it.

Cheers,

- -- 
  .''`. 
 : :' :rnaud
 `. `'  
   `-
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.2.5 (GNU/Linux)

iD8DBQFCB1dA4vzFZu62tMIRAqpAAJ4l0w3KMf1F1h7NhDsuctnvtCNdrACfRMLI
w3AXEr2Wpyf778SugHr83Es=
=LZgM
-END PGP SIGNATURE-

Bug#293992: postgresql: Upgrade failed due to missing file.

[Andreas Rabus]

Package: postgresql
Version: 7.4.7-1
Severity: normal

Hi,
i got the following error message after dist-upgrade

/var/lib/dpkg/info/postgresql.postinst: line 323: 
/usr/share/postgresql/postmaster.conf.in: No such file or directory

The mentione file didn't exists and is not in the package, as dpkg -L shows.
Did i miss s.th.?
Or is it really a bug?

Thanks fpr your work,

Andreas

-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (990, 'testing'), (99, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.7
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)

Versions of packages postgresql depends on:
ii  adduser  3.59Add and remove users and groups
ii  debconf [debconf 1.4.30.11   Debian configuration management sy
ii  debianutils  2.8.4   Miscellaneous utilities specific t
ii  libc62.3.2.ds1-20GNU C Library: Shared libraries an
ii  libcomerr2   1.35-6  The Common Error Description libra
ii  libkrb53 1.3.6-1 MIT Kerberos runtime libraries
ii  libpam0g 0.76-22 Pluggable Authentication Modules l
ii  libperl5.8   5.8.4-5 Shared Perl library
ii  libpq3   7.4.7-1 PostgreSQL C client library
ii  libreadline4 4.3-11  GNU readline and history libraries
ii  libssl0.9.7  0.9.7e-2SSL shared libraries
ii  mailx1:8.1.2-0.20040524cvs-4 A simple mail user agent
ii  postgresql-clien 7.4.7-1 front-end programs for PostgreSQL
ii  procps   1:3.2.1-2   The /proc file system utilities
ii  python2.32.3.4-19An interactive high-level object-o
ii  ucf  1.13Update Configuration File: preserv
ii  zlib1g   1:1.2.2-3   compression library - runtime

-- debconf information:
* postgresql/upgrade/preserve_location: /var/lib/postgres/preserve
* postgresql/settings/day_month_order: European
  postgresql/convert-postmaster.init: true
* postgresql/upgrade/policy: true
  postgresql/enable_lang: true
  postgresql/contains_POSTGRESHOME: true
  postgresql/very_old_version_warning: true
* postgresql/upgrade/dump_location: /var/lib/postgres
  postgresql/convert-pg_hba.conf: true
* postgresql/initdb/location: /var/lib/postgres/data
* postgresql/settings/locale: [EMAIL PROTECTED]
  postgresql/peer-to-ident: true
  postgresql/missing_conf: true
* postgresql/purge_data_too: true
* postgresql/settings/encoding: UNICODE
* postgresql/settings/date_style: ISO


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293983: Wrong variable name (old-passwords) in my.cnf

[Christian Hammers]

Hello Patrice

On 2005-02-07 Patrice Pawlak wrote:
 The configuration file /etc/mysql/my.cnf for MySQL 4.1 comes with a wrong 
 variable name: old-passwords should be replaced by old_passwords.
 
 Not having this variable set prevent older clients from connecting to the 
 server, which can be quite blocking in some configurations.

It seems to be true that the preferred way of writing the options is
with underscore but it nevertheless also works with dashes, I just
verified it:

-- old-passwords = 1

mysql SHOW VARIABLES LIKE %pass%;
+---+---+
| Variable_name | Value |
+---+---+
| old_passwords | ON|
+---+---+
1 row in set (0.00 sec)

-- # old-passwords = 1 and restart

mysql SHOW VARIABLES LIKE %pass%;
ERROR 2006 (HY000): MySQL server has gone away
No connection. Trying to reconnect...
Connection id:4
Current database: *** NONE ***

+---+---+
| Variable_name | Value |
+---+---+
| old_passwords | OFF   |
+---+---+
1 row in set (0.00 sec)

-- old_passwords = 1 and restart

mysql SHOW VARIABLES LIKE %pass%;
ERROR 2006 (HY000): MySQL server has gone away
No connection. Trying to reconnect...
Connection id:4
Current database: *** NONE ***

+---+---+
| Variable_name | Value |
+---+---+
| old_passwords | ON|
+---+---+
1 row in set (0.01 sec)


old-passwords will be replaced with old_passwords in the next upload.

bye,

-christian-


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293993: kvdr: New upstream release

[Alastair McKinstry]

Package: kvdr
Severity: wishlist


New upstream release 0.63 is available

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.8.1-2-386
Locale: LANG=en_IE, LC_CTYPE=en_IE (charmap=ISO-8859-1)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#288072: Fixed upstream

[Arnaud Giersch]

tags 288072 fixed-upstream
thanks

Hello,

This bug is fixed in xemacs 21.4.17.

http://list-archive.xemacs.org/xemacs-announce/200502/msg1.html
[...]
-- Fix: Fix gnus regexp infloop.
[...]

Regards,
-- 
Arnaud


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293992: postgresql: Upgrade failed due to missing file.

[Martin Pitt]

tag 293992 unreproducible moreinfo
thanks

Hi!

Andreas Rabus [2005-02-07 12:46 +0100]:
 Package: postgresql
 Version: 7.4.7-1
 Severity: normal
 
 Hi,
 i got the following error message after dist-upgrade
 
 /var/lib/dpkg/info/postgresql.postinst: line 323: 
 /usr/share/postgresql/postmaster.conf.in: No such file or directory
 
 The mentione file didn't exists and is not in the package, as dpkg -L shows.
 Did i miss s.th.?
 Or is it really a bug?

This is really odd:

$ wget 
http://ftp.de.debian.org/debian/pool/main/p/postgresql/postgresql_7.4.7-1_i386.deb
[...]
$ $ ar p postgresql_7.4.7-1_i386.deb data.tar.gz | tar tz | grep postmaster.conf
./usr/share/postgresql/postmaster.conf.in

Can you please recheck your deb whether it really does not contain the
file? If so, which mirror are you using? If not, were there any other
messages during package installation?

Thanks,

Martin

-- 
Martin Pitt   http://www.piware.de
Ubuntu Developerhttp://www.ubuntulinux.org
Debian GNU/Linux Developer   http://www.debian.org


signature.asc
Description: Digital signature

Bug#293932: profile.py has non-free license

[Matthias Klose]

[debian-legal, how do other packages handle the md5 stuff?]

Joe Wreschnig writes:
 Package: python
 Severity: serious
 
 The license for the Python profiler[0] does not allow it to be copied or
 modified independently of other Python programs. This is a violation of
 DFSG #3 (and also is just stupid). This bug affects likely every version
 of Python in Debian (and that ever was in Debian) (and so IMO should not
 hold up the sarge release).

ok, I'll address this upstream.

 Howeer, /usr/share/doc/python2.4/copyright does not include this
 license. In fact, almost none of the licenses at
 http://www.python.org/doc/current/lib/node822.html are included. At
 least http://www.python.org/doc/current/lib/node826.html also looks
 non-free.

will add the licenses to the 2.3 and 2.4 pacakges.


debian-legal, how do other packages handle the md5 stuff?

Copyright (C) 1991-2, RSA Data Security, Inc. Created 1991. All
rights reserved.

License to copy and use this software is granted provided that it
is identified as the RSA Data Security, Inc. MD5 Message-Digest
Algorithm in all material mentioning or referencing this software
or this function.

License is also granted to make and use derivative works provided
that such works are identified as derived from the RSA Data
Security, Inc. MD5 Message-Digest Algorithm in all material
mentioning or referencing the derived work.

RSA Data Security, Inc. makes no representations concerning either
the merchantability of this software or the suitability of this
software for any particular purpose. It is provided as is
without express or implied warranty of any kind.

These notices must be retained in any copies of any part of this
documentation and/or software.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293995: mysql-connector-java-3.1.6

[Stephane Leclerc]

Package: libmysql-java
Version: 3.0.9-1
Followup-For: Bug #282570


New mysql-connector-java-3.1.6 upstream version available.

Will be important to upgrade it for MySQL 4.1.x compatibility use.

Sincerely,

Stéphane






...
.  Linux - Debian - php4 - JAVA/Tomcat - MySQL - Infogerance  .
. email: [EMAIL PROTECTED] - http://www.actionweb.fr/ .
.  Tel: (0)141 906 100-Fax: (0)141 906 101.
...

Bug#293994: libgtk2.0-0: gedit starts in right-to-left mode (?)

[Andreas Degert]

Package: libgtk2.0-0
Version: 2.6.1-2
Severity: normal

When version 2.6.1-2 of libgtk2.0-0 is installed, gedit starts with
the cursor on the top right of the window (instead top left). When
typing letters, the cursor jumps to the left, when typing numbers, it
stays on the right. Anyhow, with version 2.4.14-2 of libgtk2.0-0
everything behaves as expected.

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.4.19-686-smp
Locale: LANG=de_DE, LC_CTYPE=de_DE (charmap=ISO-8859-15)

Versions of packages libgtk2.0-0 depends on:
ii  libatk1.0-0   1.8.0-3The ATK accessibility toolkit
ii  libc6 2.3.2.ds1-20   GNU C Library: Shared libraries an
ii  libfontconfig12.2.3-1generic font configuration library
ii  libfreetype6  2.1.7-2.1  FreeType 2 font engine, shared lib
ii  libglib2.0-0  2.6.1-3The GLib library of C routines
ii  libgtk2.0-0   2.6.1-2The GTK+ graphical user interface 
ii  libgtk2.0-bin 2.6.1-2The programs for the GTK+ graphica
ii  libgtk2.0-common  2.6.1-2Common files for the GTK+ graphica
ii  libjpeg62 6b-7   The Independent JPEG Group's JPEG 
ii  libpango1.0-0 1.8.0-3Layout and rendering of internatio
ii  libpng12-01.2.8rel-1 PNG library - runtime
ii  libtiff4  3.6.1-1.1  Tag Image File Format library
ii  libx11-6  4.3.0.dfsg.1-6 X Window System protocol client li
ii  libxcursor1   1.1.3-1X cursor management library
ii  libxext6  4.3.0.dfsg.1-6 X Window System miscellaneous exte
ii  libxft2   2.1.2-6FreeType-based font drawing librar
ii  libxi64.3.0.dfsg.1-6 X Window System Input extension li
ii  libxrandr24.3.0.dfsg.1-6 X Window System Resize, Rotate and
ii  libxrender1   0.8.3-7X Rendering Extension client libra
ii  xlibs 4.3.0.dfsg.1-6 X Window System client libraries m
ii  zlib1g1:1.2.1.1-5compression library - runtime

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293996: po-debconf: Doesn't work with fakechroot

[Piotr Roszatycki]

Package: po-debconf
Version: 0.8.18
Severity: minor
Tags: patch

Hi. I've tried to build my package in fakechroot environment. The build process
hangs up on po2debconf and question about mv command. It is probably the problem
with fakechroot because it is just a hack but there is very easy workaround
for po2debconf.

The message from debuild:

po2debconf --podir=debian/po 'debian/tmp-php5-common/DEBIAN/templates'  
'debian/tmp-php5-commo
n/DEBIAN/templates.merge'
Warning:Outdated PO file: debian/po/cs.po, running
  debconf-updatepo --podir=debian/po
mv: overwrite `/tmp/po2debconf.8Omd53', overriding mode 0600?

The output from ls:

-rw---  1 root root 4734 Feb  6 06:25 /tmp/po2debconf.8Omd53
-rw---  1 root root0 Feb  6 06:25 /tmp/po2debconf.WdJiYP

The trivial patch:

--- /usr/bin/po2debconf.orig2005-02-07 12:21:08.0 +
+++ /usr/bin/po2debconf 2005-02-07 12:21:14.0 +
@@ -283,7 +283,7 @@
 exit 1
 }
 ls -l $tmpfile $outfile 12
-sed -e 's/^DefaultChoice/Default/' $outfile  $tmpfile  mv $tmpfile $outfile
+sed -e 's/^DefaultChoice/Default/' $outfile  $tmpfile  mv -f $tmpfile 
$outfile

 [ -n $is_tmp ]  cat $outfile



-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (900, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.10-1-686
Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2)

Versions of packages po-debconf depends on:
ii  gettext0.14.1-8  GNU Internationalization utilities
ii  intltool-debian0.30+20040213 Help i18n of RFC822 compliant conf
ii  perl   5.8.4-5   Larry Wall's Practical Extraction 

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293997: FTBFS in experimental

[Andreas Barth]

Package: libgnome2-gconf-perl
Version: 1.012-1
Severity: serious
Tags: experimental


Seems a build-dependency is missing.

Cheers,
Andi

Automatic build of libgnome2-gconf-perl_1.012-1 on haydn by sbuild/s390 1.170.5
Build started at 20050207-1240
**
Checking available source versions...
Fetching source files...
Reading Package Lists...
Building Dependency Tree...
Need to get 34.4kB of source archives.
Get:1 ftp://linux.mathematik.tu-darmstadt.de experimental/main 
libgnome2-gconf-perl 1.012-1 (dsc) [808B]
Get:2 ftp://linux.mathematik.tu-darmstadt.de experimental/main 
libgnome2-gconf-perl 1.012-1 (tar) [31.2kB]
Get:3 ftp://linux.mathematik.tu-darmstadt.de experimental/main 
libgnome2-gconf-perl 1.012-1 (diff) [2379B]
Fetched 34.4kB in 1s (22.9kB/s)
Download complete and in download only mode
** Using build dependencies supplied by package:
Build-Depends: debhelper (= 4.0.2), perl (= 5.8.0-7), 
libextutils-depends-perl (= 0.200), libextutils-pkgconfig-perl (= 1.03), 
libglib-perl (= 1.070), libgtk2-perl (= 1.070), libgtk2.0-dev, libgconf2-dev 
(= 2.0)
Checking for already installed source dependencies...
[...]
Checking correctness of source dependencies...
Toolchain package versions: libc6-dev_2.3.2.ds1-20 
linux-kernel-headers_2.5.999-test7-bk-17 gcc-3.3_1:3.3.5-8 g++-3.3_1:3.3.5-6 
binutils_2.15-5 libstdc++5_1:3.3.5-6 libstdc++5-3.3-dev_1:3.3.5-6
--
dpkg-source: extracting libgnome2-gconf-perl in libgnome2-gconf-perl-1.012
su: Authentication service cannot retrieve authentication info.
(Ignored)
dpkg-buildpackage: source package is libgnome2-gconf-perl
dpkg-buildpackage: source version is 1.012-1
dpkg-buildpackage: host architecture is s390
 /usr/bin/fakeroot debian/rules clean
dh_testdir
dh_testroot
rm -f build-stamp
# Add here commands to clean up after the build process.
/usr/bin/make realclean
make[1]: Entering directory `/build/buildd/libgnome2-gconf-perl-1.012'
make[1]: *** No rule to make target `realclean'.  Stop.
make[1]: Leaving directory `/build/buildd/libgnome2-gconf-perl-1.012'
make: [clean] Error 2 (ignored)
dh_clean
 debian/rules build
dh_testdir
# Add here commands to compile the package.
/usr/bin/perl Makefile.PL INSTALLDIRS=vendor
Glib version 1.070 required--this is only version 1.062 at 
/usr/share/perl/5.8/Exporter/Heavy.pm line 107.
BEGIN failed--compilation aborted at (eval 7) line 1.

MakeMaker FATAL: prerequisites not found (Glib 1.070, Gtk2 1.070)

   Please install these modules first and rerun 'perl Makefile.PL'.
Checking if your kit is complete...
Looks good
make: *** [build-stamp] Error 2
**
Build finished at 20050207-1304
FAILED [dpkg-buildpackage died]

NOTE: The package could have used binaries from the following packages
(access time changed) without a source dependency:
  xlibs-dev: /usr/X11R6/lib/libX11.so
-- 
   http://home.arcor.de/andreas-barth/
   PGP 1024/89FB5CE5  DC F1 85 6D A6 45 9C 0F  3B BE F1 D0 C5 D1 D9 0C


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#208700: Bug#256680 confirmed fixed

[Helge Hafting]

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to [EMAIL PROTECTED],
and the maintainer will reopen the bug report if appropriate.
I can confirm that the problem is solved.  I installed netbase from 
unstable.  Then I rewrote nsswitch conf to try ldap lookups first.
There were no hang during shutdown - the problem really is solved.
Thanks a lot!

Helge Hafting

--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#261753: workaround for the konqueror file associations problem

[Ji Volf]

Hi, 
I had the same problem - I could not permanently associate e.g. mpg with gmplayer.

Workaround which worked for me:

konqeror / setup / file associations / video / mpeg / add
then manually write gmplayer (if you use app from menu, it is owned by root and cannot be changed)
then press modify/change/?? button ( I dont know, since my labels are in Czech)
choose application tab
add mime types you want
press advanced properties 
deselect run / allow response ... (this supress the running clock utem on taskbar, playing mpg from konqueror)

I hope this works not only for me...

Nice day, Jiri Volf

Bug#293989: xsl stylesheet does not work anymore

[Michael Wiedmann]

Wichert Akkerman [EMAIL PROTECTED] wrote:

 Package: db2latex-xsl
 Version: 0.8pre1-2
 Severity: grave
 
 I am suddenly getting this on every run:
..
 xsl:template: error duplicate name 'question.answer.label'

A few weeks ago there was an identical bug report (289183) reported by Nikolai
Prokoschenko [EMAIL PROTECTED]. Together we figured out that this was
due to changed handling of duplicate templates in the newer versions of
xsltproc. 
So I guess you are using xsltproc from experimental?

A workaround for the time being is to use xsltprc from sarge. 
A general solution requires upstream modifications. Unfortunately up to now I
didn't get any response from upstream about this issue :-(

Michael
-- 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293994: libgtk2.0-0: gedit starts in right-to-left mode (?)

[Sebastien Bacher]

Le lundi 07 février 2005 à 13:16 +0100, Andreas Degert a écrit :
 Package: libgtk2.0-0
 Version: 2.6.1-2
 Severity: normal
 
 When version 2.6.1-2 of libgtk2.0-0 is installed, gedit starts with
 the cursor on the top right of the window (instead top left). When
 typing letters, the cursor jumps to the left, when typing numbers, it
 stays on the right. Anyhow, with version 2.4.14-2 of libgtk2.0-0
 everything behaves as expected.

Hi,

Does it happen in gtk-demo or in other applications ? What locale and
input method are you using ?


Cheers,

Sebastien Bacher

Bug#294010: php-imlib: phpapi revision requires a new upload in sid

[Adam Conrad]

Package: php-imlib
Severity: grave
Tags: sid

Due to recent changes in the php4 packages, your package has become 
uninstallable
in sid (as of today's dinstall run, installing php4_4:4.3.10-3).  We are now
building php4 with Zend Thread Safety which both changes the ABI and changes
the directory that extensions should be installed into.

To build a new package, you need to do three things:

1) build-dep on php4-dev (= 4:4.3.10-3) (you can pull it from incoming to get
   a head start.  The buildds already do)
2) ensure that your phpapi dependency has -zts tacked to the end of it.
   for examples on how to do so, see the debian/rules in php4-pgsql_3:4.3.10-1
3) Make sure that your extension installs to the correct directory
   (you do use `php-config --extension-dir`, don't you?)

That should be it.

Due to the simplicity and non-intrusiveness of these changes, if I don't see
uploads in the next 24 hours, I will happily NMU to fix the affected packages.

... Adam Conrad

(PS: Yes, this does have the blessing of at least one Release Manager)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294008: php4-sqlite: phpapi revision requires a new upload in sid

[Adam Conrad]

Package: php4-sqlite
Severity: grave
Tags: sid

Due to recent changes in the php4 packages, your package has become 
uninstallable
in sid (as of today's dinstall run, installing php4_4:4.3.10-3).  We are now
building php4 with Zend Thread Safety which both changes the ABI and changes
the directory that extensions should be installed into.

To build a new package, you need to do three things:

1) build-dep on php4-dev (= 4:4.3.10-3) (you can pull it from incoming to get
   a head start.  The buildds already do)
2) ensure that your phpapi dependency has -zts tacked to the end of it.
   for examples on how to do so, see the debian/rules in php4-pgsql_3:4.3.10-1
3) Make sure that your extension installs to the correct directory
   (you do use `php-config --extension-dir`, don't you?)

That should be it.

Due to the simplicity and non-intrusiveness of these changes, if I don't see
uploads in the next 24 hours, I will happily NMU to fix the affected packages.

... Adam Conrad

(PS: Yes, this does have the blessing of at least one Release Manager)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294007: php4-mcrypt: phpapi revision requires a new upload in sid

[Adam Conrad]

Package: php4-mcrypt
Severity: grave
Tags: sid

Due to recent changes in the php4 packages, your package has become 
uninstallable
in sid (as of today's dinstall run, installing php4_4:4.3.10-3).  We are now
building php4 with Zend Thread Safety which both changes the ABI and changes
the directory that extensions should be installed into.

To build a new package, you need to do three things:

1) build-dep on php4-dev (= 4:4.3.10-3) (you can pull it from incoming to get
   a head start.  The buildds already do)
2) ensure that your phpapi dependency has -zts tacked to the end of it.
   for examples on how to do so, see the debian/rules in php4-pgsql_3:4.3.10-1
3) Make sure that your extension installs to the correct directory
   (you do use `php-config --extension-dir`, don't you?)

That should be it.

Due to the simplicity and non-intrusiveness of these changes, if I don't see
uploads in the next 24 hours, I will happily NMU to fix the affected packages.

... Adam Conrad

(PS: Yes, this does have the blessing of at least one Release Manager)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294002: php4-rrdtool: phpapi revision requires a new upload in sid

[Adam Conrad]

Package: php4-rrdtool
Severity: grave
Tags: sid

Due to recent changes in the php4 packages, your package has become 
uninstallable
in sid (as of today's dinstall run, installing php4_4:4.3.10-3).  We are now
building php4 with Zend Thread Safety which both changes the ABI and changes
the directory that extensions should be installed into.

To build a new package, you need to do three things:

1) build-dep on php4-dev (= 4:4.3.10-3) (you can pull it from incoming to get
   a head start.  The buildds already do)
2) ensure that your phpapi dependency has -zts tacked to the end of it.
   for examples on how to do so, see the debian/rules in php4-pgsql_3:4.3.10-1
3) Make sure that your extension installs to the correct directory
   (you do use `php-config --extension-dir`, don't you?)

That should be it.

Due to the simplicity and non-intrusiveness of these changes, if I don't see
uploads in the next 24 hours, I will happily NMU to fix the affected packages.

... Adam Conrad

(PS: Yes, this does have the blessing of at least one Release Manager)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294000: php4-interbase: phpapi revision requires a new upload in sid

[Adam Conrad]

Package: php4-interbase
Severity: grave
Tags: sid

Due to recent changes in the php4 packages, your package has become 
uninstallable
in sid (as of today's dinstall run, installing php4_4:4.3.10-3).  We are now
building php4 with Zend Thread Safety which both changes the ABI and changes
the directory that extensions should be installed into.

To build a new package, you need to do three things:

1) build-dep on php4-dev (= 4:4.3.10-3) (you can pull it from incoming to get
   a head start.  The buildds already do)
2) ensure that your phpapi dependency has -zts tacked to the end of it.
   for examples on how to do so, see the debian/rules in php4-pgsql_3:4.3.10-1
3) Make sure that your extension installs to the correct directory
   (you do use `php-config --extension-dir`, don't you?)

That should be it.

Due to the simplicity and non-intrusiveness of these changes, if I don't see
uploads in the next 24 hours, I will happily NMU to fix the affected packages.

... Adam Conrad

(PS: Yes, this does have the blessing of at least one Release Manager)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293999: php4-idn: phpapi revision requires a new upload in sid

[Adam Conrad]

Package: php4-idn
Severity: grave
Tags: sid

Due to recent changes in the php4 packages, your package has become 
uninstallable
in sid (as of today's dinstall run, installing php4_4:4.3.10-3).  We are now
building php4 with Zend Thread Safety which both changes the ABI and changes
the directory that extensions should be installed into.

To build a new package, you need to do three things:

1) build-dep on php4-dev (= 4:4.3.10-3) (you can pull it from incoming to get
   a head start.  The buildds already do)
2) ensure that your phpapi dependency has -zts tacked to the end of it.
   for examples on how to do so, see the debian/rules in php4-pgsql_3:4.3.10-1
3) Make sure that your extension installs to the correct directory
   (you do use `php-config --extension-dir`, don't you?)

That should be it.

Due to the simplicity and non-intrusiveness of these changes, if I don't see
uploads in the next 24 hours, I will happily NMU to fix the affected packages.

... Adam Conrad

(PS: Yes, this does have the blessing of at least one Release Manager)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294001: php4-imagick: phpapi revision requires a new upload in sid

[Adam Conrad]

Package: php4-imagick
Severity: grave
Tags: sid

Due to recent changes in the php4 packages, your package has become 
uninstallable
in sid (as of today's dinstall run, installing php4_4:4.3.10-3).  We are now
building php4 with Zend Thread Safety which both changes the ABI and changes
the directory that extensions should be installed into.

To build a new package, you need to do three things:

1) build-dep on php4-dev (= 4:4.3.10-3) (you can pull it from incoming to get
   a head start.  The buildds already do)
2) ensure that your phpapi dependency has -zts tacked to the end of it.
   for examples on how to do so, see the debian/rules in php4-pgsql_3:4.3.10-1
3) Make sure that your extension installs to the correct directory
   (you do use `php-config --extension-dir`, don't you?)

That should be it.

Due to the simplicity and non-intrusiveness of these changes, if I don't see
uploads in the next 24 hours, I will happily NMU to fix the affected packages.

... Adam Conrad

(PS: Yes, this does have the blessing of at least one Release Manager)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294003: php4-lasso: phpapi revision requires a new upload in sid

[Adam Conrad]

Package: php4-lasso
Severity: grave
Tags: sid

Due to recent changes in the php4 packages, your package has become 
uninstallable
in sid (as of today's dinstall run, installing php4_4:4.3.10-3).  We are now
building php4 with Zend Thread Safety which both changes the ABI and changes
the directory that extensions should be installed into.

To build a new package, you need to do three things:

1) build-dep on php4-dev (= 4:4.3.10-3) (you can pull it from incoming to get
   a head start.  The buildds already do)
2) ensure that your phpapi dependency has -zts tacked to the end of it.
   for examples on how to do so, see the debian/rules in php4-pgsql_3:4.3.10-1
3) Make sure that your extension installs to the correct directory
   (you do use `php-config --extension-dir`, don't you?)

That should be it.

Due to the simplicity and non-intrusiveness of these changes, if I don't see
uploads in the next 24 hours, I will happily NMU to fix the affected packages.

... Adam Conrad

(PS: Yes, this does have the blessing of at least one Release Manager)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294004: turck-mmcache: phpapi revision requires a new upload in sid

[Adam Conrad]

Package: turck-mmcache
Severity: grave
Tags: sid

Due to recent changes in the php4 packages, your package has become 
uninstallable
in sid (as of today's dinstall run, installing php4_4:4.3.10-3).  We are now
building php4 with Zend Thread Safety which both changes the ABI and changes
the directory that extensions should be installed into.

To build a new package, you need to do three things:

1) build-dep on php4-dev (= 4:4.3.10-3) (you can pull it from incoming to get
   a head start.  The buildds already do)
2) ensure that your phpapi dependency has -zts tacked to the end of it.
   for examples on how to do so, see the debian/rules in php4-pgsql_3:4.3.10-1
3) Make sure that your extension installs to the correct directory
   (you do use `php-config --extension-dir`, don't you?)

That should be it.

Due to the simplicity and non-intrusiveness of these changes, if I don't see
uploads in the next 24 hours, I will happily NMU to fix the affected packages.

... Adam Conrad

(PS: Yes, this does have the blessing of at least one Release Manager)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294005: php4-auth-pam: phpapi revision requires a new upload in sid

[Adam Conrad]

Package: php4-auth-pam
Severity: grave
Tags: sid

Due to recent changes in the php4 packages, your package has become 
uninstallable
in sid (as of today's dinstall run, installing php4_4:4.3.10-3).  We are now
building php4 with Zend Thread Safety which both changes the ABI and changes
the directory that extensions should be installed into.

To build a new package, you need to do three things:

1) build-dep on php4-dev (= 4:4.3.10-3) (you can pull it from incoming to get
   a head start.  The buildds already do)
2) ensure that your phpapi dependency has -zts tacked to the end of it.
   for examples on how to do so, see the debian/rules in php4-pgsql_3:4.3.10-1
3) Make sure that your extension installs to the correct directory
   (you do use `php-config --extension-dir`, don't you?)

That should be it.

Due to the simplicity and non-intrusiveness of these changes, if I don't see
uploads in the next 24 hours, I will happily NMU to fix the affected packages.

... Adam Conrad

(PS: Yes, this does have the blessing of at least one Release Manager)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294006: php4-spplus: phpapi revision requires a new upload in sid

[Adam Conrad]

Package: php4-spplus
Severity: grave
Tags: sid

Due to recent changes in the php4 packages, your package has become 
uninstallable
in sid (as of today's dinstall run, installing php4_4:4.3.10-3).  We are now
building php4 with Zend Thread Safety which both changes the ABI and changes
the directory that extensions should be installed into.

To build a new package, you need to do three things:

1) build-dep on php4-dev (= 4:4.3.10-3) (you can pull it from incoming to get
   a head start.  The buildds already do)
2) ensure that your phpapi dependency has -zts tacked to the end of it.
   for examples on how to do so, see the debian/rules in php4-pgsql_3:4.3.10-1
3) Make sure that your extension installs to the correct directory
   (you do use `php-config --extension-dir`, don't you?)

That should be it.

Due to the simplicity and non-intrusiveness of these changes, if I don't see
uploads in the next 24 hours, I will happily NMU to fix the affected packages.

... Adam Conrad

(PS: Yes, this does have the blessing of at least one Release Manager)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294009: php4-tclink: phpapi revision requires a new upload in sid

[Adam Conrad]

Package: php4-tclink
Severity: grave
Tags: sid

Due to recent changes in the php4 packages, your package has become 
uninstallable
in sid (as of today's dinstall run, installing php4_4:4.3.10-3).  We are now
building php4 with Zend Thread Safety which both changes the ABI and changes
the directory that extensions should be installed into.

To build a new package, you need to do three things:

1) build-dep on php4-dev (= 4:4.3.10-3) (you can pull it from incoming to get
   a head start.  The buildds already do)
2) ensure that your phpapi dependency has -zts tacked to the end of it.
   for examples on how to do so, see the debian/rules in php4-pgsql_3:4.3.10-1
3) Make sure that your extension installs to the correct directory
   (you do use `php-config --extension-dir`, don't you?)

That should be it.

Due to the simplicity and non-intrusiveness of these changes, if I don't see
uploads in the next 24 hours, I will happily NMU to fix the affected packages.

... Adam Conrad

(PS: Yes, this does have the blessing of at least one Release Manager)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294011: evince: Cannot display DVI

[Michael Piefel]

Package: evince
Version: 0.1.3-1
Severity: important

Since evinces description claims it to be a DVI viewer as well, not
being able is a bug. But perhaps just the description should be changed.

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.7-1-686
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)

Versions of packages evince depends on:
ii  libart-2.0-2 2.3.17-1Library of functions for 2D graphi
ii  libatk1.0-0  1.8.0-4 The ATK accessibility toolkit
ii  libaudiofile00.2.6-5 Open-source version of SGI's audio
ii  libbonobo2-0 2.8.1-1 Bonobo CORBA interfaces library
ii  libbonoboui2-0   2.8.1-1 The Bonobo UI library
ii  libc62.3.2.ds1-20GNU C Library: Shared libraries an
ii  libesd0  0.2.35-2Enlightened Sound Daemon - Shared 
ii  libfontconfig1   2.2.3-4 generic font configuration library
ii  libfreetype6 2.1.7-2.3   FreeType 2 font engine, shared lib
ii  libgcc1  1:3.4.3-7   GCC support library
ii  libgconf2-4  2.8.1-4 GNOME configuration database syste
ii  libgcrypt11  1.2.0-11LGPL Crypto library - runtime libr
ii  libglade2-0  1:2.4.1-2   library to load .glade files at ru
ii  libglib2.0-0 2.6.2-1 The GLib library of C routines
ii  libgnome-keyring00.4.1-1 GNOME keyring services library
ii  libgnome2-0  2.8.0-6 The GNOME 2 library - runtime file
ii  libgnomecanvas2-02.8.0-1 A powerful object-oriented display
ii  libgnomeprint2.2-0   2.8.2-1 The GNOME 2.2 print architecture -
ii  libgnomeprintui2.2-0 2.8.2-2 GNOME 2.2 print architecture User 
ii  libgnomeui-0 2.8.0-3 The GNOME 2 libraries (User Interf
ii  libgnomevfs2-0   2.8.3-11The GNOME virtual file-system libr
ii  libgnutls11  1.0.16-13   GNU TLS library - runtime library
ii  libgpg-error01.0-1   library for common error values an
ii  libgtk2.0-0  2.6.2-1 The GTK+ graphical user interface 
ii  libhowl0 0.9.8-2 Library for Zeroconf service disco
ii  libice6  4.3.0.dfsg.1-10 Inter-Client Exchange library
ii  libjpeg626b-9The Independent JPEG Group's JPEG 
ii  liborbit21:2.10.2-1.1libraries for ORBit2 - a CORBA ORB
ii  libpango1.0-01.8.0-3 Layout and rendering of internatio
ii  libpopt0 1.7-5   lib for parsing cmdline parameters
ii  libsm6   4.3.0.dfsg.1-10 X Window System Session Management
ii  libstdc++5   1:3.3.5-8   The GNU Standard C++ Library v3
ii  libtasn1-2   0.2.10-4Manage ASN.1 structures (runtime)
ii  libx11-6 4.3.0.dfsg.1-10 X Window System protocol client li
ii  libxml2  2.6.16-2GNOME XML library
ii  xlibs4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu
ii  zlib1g   1:1.2.2-4   compression library - runtime

-- no debconf information

Bug#294012: php4-apd: phpapi revision requires a new upload in sid

[Adam Conrad]

Package: php4-apd
Severity: grave
Tags: sid

Due to recent changes in the php4 packages, your package has become 
uninstallable
in sid (as of today's dinstall run, installing php4_4:4.3.10-3).  We are now
building php4 with Zend Thread Safety which both changes the ABI and changes
the directory that extensions should be installed into.

Furthermore, it has come to my attention while investigating these bug reports
that your package doesn't correctly depend on phpapi-$(version), as it should.
Please see php4-pgsql for an example of how this is supposed to be done.

To build a new package, you need to do three things:

1) build-dep on php4-dev (= 4:4.3.10-3) (you can pull it from incoming to get
   a head start.  The buildds already do)
2) ensure that your phpapi dependency has -zts tacked to the end of it.
   for examples on how to do so, see the debian/rules in php4-pgsql_3:4.3.10-1
3) Make sure that your extension installs to the correct directory
   (you do use `php-config --extension-dir`, don't you?)

That should be it.

Due to the simplicity and non-intrusiveness of these changes, if I don't see
uploads in the next 24 hours, I will happily NMU to fix the affected packages.

... Adam Conrad

(PS: Yes, this does have the blessing of at least one Release Manager)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294013: php4-gpib: phpapi revision requires a new upload in sid

[Adam Conrad]

Package: php4-gpib
Severity: grave
Tags: sid

Due to recent changes in the php4 packages, your package has become 
uninstallable
in sid (as of today's dinstall run, installing php4_4:4.3.10-3).  We are now
building php4 with Zend Thread Safety which both changes the ABI and changes
the directory that extensions should be installed into.

Furthermore, it has come to my attention while investigating these bug reports
that your package doesn't correctly depend on phpapi-$(version), as it should.
Please see php4-pgsql for an example of how this is supposed to be done.

To build a new package, you need to do three things:

1) build-dep on php4-dev (= 4:4.3.10-3) (you can pull it from incoming to get
   a head start.  The buildds already do)
2) ensure that your phpapi dependency has -zts tacked to the end of it.
   for examples on how to do so, see the debian/rules in php4-pgsql_3:4.3.10-1
3) Make sure that your extension installs to the correct directory
   (you do use `php-config --extension-dir`, don't you?)

That should be it.

Due to the simplicity and non-intrusiveness of these changes, if I don't see
uploads in the next 24 hours, I will happily NMU to fix the affected packages.

... Adam Conrad

(PS: Yes, this does have the blessing of at least one Release Manager)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294014: php4-ps: phpapi revision requires a new upload in sid

[Adam Conrad]

Package: php4-ps
Severity: grave
Tags: sid

Due to recent changes in the php4 packages, your package has become 
uninstallable
in sid (as of today's dinstall run, installing php4_4:4.3.10-3).  We are now
building php4 with Zend Thread Safety which both changes the ABI and changes
the directory that extensions should be installed into.

Furthermore, it has come to my attention while investigating these bug reports
that your package doesn't correctly depend on phpapi-$(version), as it should.
Please see php4-pgsql for an example of how this is supposed to be done.

To build a new package, you need to do three things:

1) build-dep on php4-dev (= 4:4.3.10-3) (you can pull it from incoming to get
   a head start.  The buildds already do)
2) ensure that your phpapi dependency has -zts tacked to the end of it.
   for examples on how to do so, see the debian/rules in php4-pgsql_3:4.3.10-1
3) Make sure that your extension installs to the correct directory
   (you do use `php-config --extension-dir`, don't you?)

That should be it.

Due to the simplicity and non-intrusiveness of these changes, if I don't see
uploads in the next 24 hours, I will happily NMU to fix the affected packages.

... Adam Conrad

(PS: Yes, this does have the blessing of at least one Release Manager)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294015: php4-sqlrelay: phpapi revision requires a new upload in sid

[Adam Conrad]

Package: php4-sqlrelay
Severity: grave
Tags: sid

Due to recent changes in the php4 packages, your package has become 
uninstallable
in sid (as of today's dinstall run, installing php4_4:4.3.10-3).  We are now
building php4 with Zend Thread Safety which both changes the ABI and changes
the directory that extensions should be installed into.

Furthermore, it has come to my attention while investigating these bug reports
that your package doesn't correctly depend on phpapi-$(version), as it should.
Please see php4-pgsql for an example of how this is supposed to be done.

To build a new package, you need to do three things:

1) build-dep on php4-dev (= 4:4.3.10-3) (you can pull it from incoming to get
   a head start.  The buildds already do)
2) ensure that your phpapi dependency has -zts tacked to the end of it.
   for examples on how to do so, see the debian/rules in php4-pgsql_3:4.3.10-1
3) Make sure that your extension installs to the correct directory
   (you do use `php-config --extension-dir`, don't you?)

That should be it.

Due to the simplicity and non-intrusiveness of these changes, if I don't see
uploads in the next 24 hours, I will happily NMU to fix the affected packages.

... Adam Conrad

(PS: Yes, this does have the blessing of at least one Release Manager)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294016: php4-vpopmail: phpapi revision requires a new upload in sid

[Adam Conrad]

Package: php4-vpopmail
Severity: grave
Tags: sid

Due to recent changes in the php4 packages, your package has become 
uninstallable
in sid (as of today's dinstall run, installing php4_4:4.3.10-3).  We are now
building php4 with Zend Thread Safety which both changes the ABI and changes
the directory that extensions should be installed into.

Furthermore, it has come to my attention while investigating these bug reports
that your package doesn't correctly depend on phpapi-$(version), as it should.
Please see php4-pgsql for an example of how this is supposed to be done.

To build a new package, you need to do three things:

1) build-dep on php4-dev (= 4:4.3.10-3) (you can pull it from incoming to get
   a head start.  The buildds already do)
2) ensure that your phpapi dependency has -zts tacked to the end of it.
   for examples on how to do so, see the debian/rules in php4-pgsql_3:4.3.10-1
3) Make sure that your extension installs to the correct directory
   (you do use `php-config --extension-dir`, don't you?)

That should be it.

Due to the simplicity and non-intrusiveness of these changes, if I don't see
uploads in the next 24 hours, I will happily NMU to fix the affected packages.

... Adam Conrad

(PS: Yes, this does have the blessing of at least one Release Manager)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294017: php4-syck: phpapi revision requires a new upload in sid

[Adam Conrad]

Package: php4-syck
Severity: grave
Tags: sid

Due to recent changes in the php4 packages, your package has become 
uninstallable
in sid (as of today's dinstall run, installing php4_4:4.3.10-3).  We are now
building php4 with Zend Thread Safety which both changes the ABI and changes
the directory that extensions should be installed into.

Furthermore, it has come to my attention while investigating these bug reports
that your package doesn't correctly depend on phpapi-$(version), as it should.
Please see php4-pgsql for an example of how this is supposed to be done.

To build a new package, you need to do three things:

1) build-dep on php4-dev (= 4:4.3.10-3) (you can pull it from incoming to get
   a head start.  The buildds already do)
2) ensure that your phpapi dependency has -zts tacked to the end of it.
   for examples on how to do so, see the debian/rules in php4-pgsql_3:4.3.10-1
3) Make sure that your extension installs to the correct directory
   (you do use `php-config --extension-dir`, don't you?)

That should be it.

Due to the simplicity and non-intrusiveness of these changes, if I don't see
uploads in the next 24 hours, I will happily NMU to fix the affected packages.

... Adam Conrad

(PS: Yes, this does have the blessing of at least one Release Manager)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294019: exmh: Opened messages marked like selected ones

[Robert Waldner]

Package: exmh
Version: 1:2.7.2-2
Severity: minor

Hi (az)!

(This is a follow-up to bug# 293560, where I reported multiple bugs)

---
 - a openened message is marked like a selected one

what do you mean? i don't see any difference to 2.5 wrt. message
marking.
---

See http://www.waldner.priv.at/temp/exmh272.jpg vs.
http://www.waldner.priv.at/temp/exmh25.jpg (about 50 kB each).

--
also, what wish/tclsh versions are active? you have three revisions of tcl/tk 
installed, what does /etc/alternatives say about them?
--

tclsh8.4, wish8.3

cheers,
rw

-- System Information:
Debian Release: testing/unstable
Architecture: i386
Kernel: Linux beren 2.4.26-1-686 #1 Sat May 1 18:04:05 EST 2004 i686
Locale: LANG=C, LC_CTYPE=C (ignored: LC_ALL set to C)

Versions of packages exmh depends on:
ii  metamail   2.7-45.1  An implementation of MIME
ii  mime-support   3.23-1MIME files 'mime.types'  'mailcap
ii  nmh [mh]   1.1-release-3 A set of electronic mail handling 
ii  tcl8.0 [tclsh] 8.0.5-7   The Tool Command Language (TCL) v8
ii  tcl8.0-ja [tclsh]  8.0.4jp1.3-14 Japanese localized version of tcl 
ii  tcl8.2 [tclsh] 8.2.3-10  The Tool Command Language (TCL) v8
ii  tcl8.3 [tclsh] 8.3.5-4   Tcl (the Tool Command Language) v8
ii  tcl8.4 [tclsh] 8.4.9-1   Tcl (the Tool Command Language) v8
ii  tk8.3 [wish]   8.3.5-4   Tk toolkit for Tcl and X11, v8.3 -

-- no debconf information



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294018: php4-dbtcp: phpapi revision requires a new upload in sid

[Adam Conrad]

Package: php4-dbtcp
Severity: grave
Tags: sid

Due to recent changes in the php4 packages, your package has become 
uninstallable
in sid (as of today's dinstall run, installing php4_4:4.3.10-3).  We are now
building php4 with Zend Thread Safety which both changes the ABI and changes
the directory that extensions should be installed into.

Furthermore, it has come to my attention while investigating these bug reports
that your package doesn't correctly depend on phpapi-$(version), as it should.
Please see php4-pgsql for an example of how this is supposed to be done.

To build a new package, you need to do three things:

1) build-dep on php4-dev (= 4:4.3.10-3) (you can pull it from incoming to get
   a head start.  The buildds already do)
2) ensure that your phpapi dependency has -zts tacked to the end of it.
   for examples on how to do so, see the debian/rules in php4-pgsql_3:4.3.10-1
3) Make sure that your extension installs to the correct directory
   (you do use `php-config --extension-dir`, don't you?)

That should be it.

Due to the simplicity and non-intrusiveness of these changes, if I don't see
uploads in the next 24 hours, I will happily NMU to fix the affected packages.

... Adam Conrad

(PS: Yes, this does have the blessing of at least one Release Manager)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#165635: [Bug java/8608] segmentation fault on compiling bad program

[rmathew at gcc dot gnu dot org]

--- Additional Comments From rmathew at gcc dot gnu dot org  2005-02-07 
13:06 ---
The simplest testcase that reproduces this bug with
the current mainline is:

class Foo
{
  void bar()
  {
int a;
int i;
for(i=a;;);
  }
}

If the int i is removed and the for loop
is changed to for(int i=a;;);, the ICE
disappears.

-- 


http://gcc.gnu.org/bugzilla/show_bug.cgi?id=8608

--- You are receiving this mail because: ---
You reported the bug, or are watching the reporter.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#293932: profile.py has non-free license

[Andrew Suffield]

On Mon, Feb 07, 2005 at 01:27:55PM +0100, Matthias Klose wrote:
 debian-legal, how do other packages handle the md5 stuff?
 
 Copyright (C) 1991-2, RSA Data Security, Inc. Created 1991. All
 rights reserved.
 
 License to copy and use this software is granted provided that it
 is identified as the RSA Data Security, Inc. MD5 Message-Digest
 Algorithm in all material mentioning or referencing this software
 or this function.
 
 License is also granted to make and use derivative works provided
 that such works are identified as derived from the RSA Data
 Security, Inc. MD5 Message-Digest Algorithm in all material
 mentioning or referencing the derived work.
 
 RSA Data Security, Inc. makes no representations concerning either
 the merchantability of this software or the suitability of this
 software for any particular purpose. It is provided as is
 without express or implied warranty of any kind.
 
 These notices must be retained in any copies of any part of this
 documentation and/or software.

This is the copy of md5.c fished out of the specification. We've seen
it before.

There are other variations of md5.c, at least one of which has either
a BSD or an MIT license, I forget which. Look around, you should find
one easily enough. They're more or less equivalent, you may have to
fiddle the function names.

-- 
  .''`.  ** Debian GNU/Linux ** | Andrew Suffield
 : :' :  http://www.debian.org/ |
 `. `'  |
   `- --  |


signature.asc
Description: Digital signature

Bug#293481: kernel-image-2.6.8-2-686: Cannot open root device

[Nigel Stephens]

Thiemo Seufer wrote:
Nigel Stephens wrote:
[snip]
 

So what could be preventing the new kernel from even running the linuxrc 
script, or at the very least preventing it from showing the output from 
the extra echo line which I added to it.
   

This might point to a missing or invalid /dev/console. (At least with
udev-managed devices that's not a completely unlikely theory.)
 

I was a bit worried about this message when I diffed my initrd-2.6.6 and 
initrd.2.6.8

 File initrd-2.6.6/dev/console is a character special file while file 
initrd-2.6.8/dev/console is a character special file

Looking in detail I see:
 shoreditch.root /tmp 2# ls -l initrd-2.6.6/dev/console
 crw-rw  1 root root 5, 1 Jan  1  1970 initrd-2.6.6/dev/console
 shoreditch.root /tmp 2# ls -l initrd-2.6.8/dev/console
 crw---  1 root tty 5, 1 Jan  1  1970 initrd-2.6.8/dev/console
So the permissions are different, but I can't imagine that would make 
any difference at this stage of the bootstrap, which must surely be 
running with a uid of root.

Of course udev may be overwriting this and screwing it up, since I think 
that 2.6.6 didn't have udev, while 2.6.8 does - is that right? Is there 
anything that I could add to the boot command line to control udev, or 
to help diagnose the problem?

Nigel
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#281758: glabels: glabels file type not correctly recognised by nautilus

[Roland Turner (Debian)]

Hi Andrew,


 Are you using the extension .glabels on the end of your files? If so,


(embarrassment) Apparently Nautilus is case-sensitive wrt filename
extensions, the extension on the file in question was .gLabels which
wasn't matching. Not a glabels bug.

Thanks.


- Raz




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294026: horde2: PHP applications should never depend on phpapi-12345

[Adam Conrad]

Package: horde2
Severity: important

Due to incorrect packaging on your part, your package has become partially
broken in sid, as of today's dinstall run.  I wish I had caught this earlier,
but I don't make a habit of reviewing all PHP apps.  Sorry.

In your dependency line, you list 'phpapi-20020918' as a dependency, however you
should NEVER do that for PHP applications.  That virtual package exists
specifically so that binary PHP extensions (like php4-pgsql, for instance) can
depend on the precise API/ABI they were built against.

If your intention was to use this as a catchall to depend on all the PHP SAPIs,
please use this instead:

Depends: php4 | php4-cgi

(You may have minimum versions specified as well, if your application demands
specific features, for example, (= 4:4.3.0-1))

Due to the simplicity involved in fixing this RC bug, if I don't see an upload
within the next 24 hours, I will NMU.

Thanks,

... Adam Conrad


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294022: imp3: PHP applications should never depend on phpapi-12345

[Adam Conrad]

Package: imp3
Severity: important

Due to incorrect packaging on your part, your package has become partially
broken in sid, as of today's dinstall run.  I wish I had caught this earlier,
but I don't make a habit of reviewing all PHP apps.  Sorry.

In your dependency line, you list 'phpapi-20020918' as a dependency, however you
should NEVER do that for PHP applications.  That virtual package exists
specifically so that binary PHP extensions (like php4-pgsql, for instance) can
depend on the precise API/ABI they were built against.

If your intention was to use this as a catchall to depend on all the PHP SAPIs,
please use this instead:

Depends: php4 | php4-cgi

(You may have minimum versions specified as well, if your application demands
specific features, for example, (= 4:4.3.0-1))

Due to the simplicity involved in fixing this RC bug, if I don't see an upload
within the next 24 hours, I will NMU.

Thanks,

... Adam Conrad


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#294025: ilohamail: PHP applications should never depend on phpapi-12345

[Adam Conrad]

Package: ilohamail
Severity: important

Due to incorrect packaging on your part, your package has become partially
broken in sid, as of today's dinstall run.  I wish I had caught this earlier,
but I don't make a habit of reviewing all PHP apps.  Sorry.

In your dependency line, you list 'phpapi-20020918' as a dependency, however you
should NEVER do that for PHP applications.  That virtual package exists
specifically so that binary PHP extensions (like php4-pgsql, for instance) can
depend on the precise API/ABI they were built against.

If your intention was to use this as a catchall to depend on all the PHP SAPIs,
please use this instead:

Depends: php4 | php4-cgi

(You may have minimum versions specified as well, if your application demands
specific features, for example, (= 4:4.3.0-1))

Due to the simplicity involved in fixing this RC bug, if I don't see an upload
within the next 24 hours, I will NMU.

Thanks,

... Adam Conrad


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]