Bug#364397: amarok fails to start
Package: amarok Version: 1.3.8-1+b1 fails to launch with the following output: $ amarok amaroK: [Loader] Starting amarokapp.. amaroK: [Loader] Don't run gdb, valgrind, etc. against this binary! Use amarokapp. amaroK: [Loader] amarokapp probably crashed! ran an strace, below is some partial output: i notice a lot of lines similar to these: 12631 gettimeofday({1145770549, 925402}, NULL) = 0 12631 select(14, [3 4 5 12 13], [], [], {0, 8088}) = 0 (Timeout) and then: 12631 select(14, [3 4 5 12 13], [], [], {0, 8048} unfinished ... 12719 set_thread_area({entry_number:-1 - 6, base_addr:0xb554bae0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, l imit_in_pages:1, seg_not_present:0, useable:1}) = 0 12719 munmap(0xb7edf000, 79860) = 0 12719 set_tid_address(0xb554bb28) = 12719 12719 rt_sigaction(SIGRTMIN, {0xb71813c0, [], SA_SIGINFO}, NULL, 8) = 0 12719 rt_sigaction(SIGRT_1, {0xb7181440, [], SA_RESTART|SA_SIGINFO}, NULL, 8) = 0 12719 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 12719 getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0 12719 _sysctl({{CTL_KERN, KERN_VERSION, 0, 20649, 1991, 0, 2, 0, 2e18, 0, 1990, 0, de48b80, 0, 2e18, 2e, 1993, 0, 13abff00, 0, 3230, 65642d30, 6e6f6362, 75732d66, 69702d62, 2e6c6578, 666e6f63, 0, 37a2, 0, 15881600, 0, 3530, 6e652d30, 656c6261, 7265742d, 756e696d, 6f632e73, 666e, 0, 50f1e, 0, 16b8c400, 0, 7528, 6e69686e, 2e646574, 666e6f63, 0, 0, 50f1f, 0, 1a572380, 0, 6128, 686f7475, 2e746e69, 666e6f63, 0, 0, 525f2, 0, 1dd0a080, 0, 7328, 702d6275, 6c657869, 6e6f632e, 66, 0, 5525b, 0, 43c84280, 0, 7928, 622d7365, 616d7469, 632e7370, 666e6f, 0, 21805, 0, 59e1bc80, 0, 3128, 65642d30, 616d6f66, 6e6f632e, 66, 0, 1992, 0, 5c091e80, 0, 3130, 65642d30, 6e6f6362, 75612d66, 69686f74, 632e746e, 666e6f, 0, 5d930, 0, 7da5f500, 0, 6e28, 75732d6f, 69702d62, 2e6c6578, 666e6f63, 0, 5d931, 0, 7da5f501, 0, 6e28, 69622d6f, 70616d74, 6f632e73, 666e, 0, 0, 20469, 0, 0, 0, 0}, 2, 0xbfd07d90, 35, (nil), 0}) = 0 12719 futex(0xb6f6c4dc, FUTEX_WAKE, 2147483647) = 0 12719 brk(0)= 0x82eb000 12719 brk(0x830c000)= 0x830c000 12719 rt_sigaction(SIGILL, {0xb6cd2010, [ILL], SA_RESTART}, {SIG_DFL}, 8) = 0 12719 rt_sigaction(SIGILL, {SIG_DFL}, {0xb6cd2010, [ILL], SA_RESTART}, 8) = 0 12719 futex(0xb64a3058, FUTEX_WAKE, 2147483647) = 0 12719 open(/dev/zero, O_RDWR) = 3 12719 mmap2(NULL, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0xb7ef1000 12719 close(3) = 0 12719 mmap2(NULL, 397312, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb54ea000 12719 --- SIGSEGV (Segmentation fault) @ 0 (0) --- 12631 ... select resumed )= 0 (Timeout) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364398: crash when starting xorg using nvidia driver
Package: nvidia-kernel-source Version: 1.0.8756-4 not sure under what package to file this, so will file here. starting xorg with nvdia driver screen goes blank. ctrl-alt-backspace has no effect. machine must be hard-reset. card it: nVidia Corporation NV34M [GeForce FX Go5200] (rev a1) options in xorg.conf: Section Device Identifier NVIDIA Corporation NV34M [GeForce FX Go5200] Driver nvidia Option NoLogoTrue Option RenderAccel True BusID PCI:1:0:0 EndSection switching to the nv driver everything is fine... -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364400: proftpd: [INTL:fr] French debconf templates translation
Package: proftpd Version: N/A Severity: wishlist Tags: patch l10n Please find attached the french debconf templates update, proofread by the debian-l10n-french mailing list contributors. If you do not already use it, please remember about the podebconf-report-po utility, which helps warning translators about changes when you modify some debconf templates in your packages. See its man page for details. The usual policy when using it is sending a warning to translators when you plan to upload a version of your package with debconf templates changes (EVEN TYPO CORRECTIONS). Then leave about one week for them to update their files (several translation teams have a QA process which requires time). podebconf-report-po will take care of sending the translators the needed material as well as getting the translators adresses from the PO files. All you have to do is just using the utility..:-) If you apply this policy, please forget about these remarks, of courseThis message is generic..:-) -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-686 Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) # translation of fr.po to French # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # #Translators, please read /usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans # # Christian Perrier [EMAIL PROTECTED], 2006. msgid msgstr Project-Id-Version: fr\n Report-Msgid-Bugs-To: [EMAIL PROTECTED] POT-Creation-Date: 2006-03-29 16:05+0200\n PO-Revision-Date: 2006-04-19 18:41+0200\n Last-Translator: Christian Perrier [EMAIL PROTECTED]\n Language-Team: French debian-l10n-french@lists.debian.org\n MIME-Version: 1.0\n Content-Type: text/plain; charset=ISO-8859-15\n Content-Transfer-Encoding: 8bit\n X-Generator: KBabel 1.11.2\n #. Type: select #. Choices #: ../proftpd.templates:3 msgid inetd, standalone msgstr inetd, indépendamment #. Type: select #. Description #: ../proftpd.templates:5 msgid Run proftpd from inetd or standalone? msgstr Méthode de lancement de proftpd : #. Type: select #. Description #: ../proftpd.templates:5 msgid ProFTPd can be run either as a service from inetd, or as a standalone server. Each choice has its own benefits. If you have only a few ftp connections per day, it is probably better to run proftp from inetd in order to save resources. msgstr ProFTPd peut être lancé soit à partir d'inetd, soit comme un serveur indépendant. Chaque méthode a ses avantages. Pour quelques connexions par jour, il n'est peut-être pas nécessaire de laisser proftpd fonctionner en permanence. #. Type: select #. Description #: ../proftpd.templates:5 msgid On the other hand, if your ftp site is visited frequently, you should rather run proftp as a standalone server (because with inetd, each time a connection is opened, a new process is spawned). msgstr Par contre, si votre site FTP est assez fréquenté, inetd n'est pas un choix judicieux, car chaque ouverture de connexion lance un nouveau processus. #. Type: note #. Description #: ../proftpd.templates:17 msgid Warning on syntax changes in ProFTPd configuration. msgstr Changement de syntaxe dans la configuration de ProFTPd #. Type: note #. Description #: ../proftpd.templates:17 msgid You are upgrading from a pre-1.3.0 version. Probably you will need to revise your previous configuration to be compliant with current directives. Please, consult documentation and how-tos available in proftpd-doc and change /etc/ proftpd/proftpd.conf as needed. msgstr Vous effectuez une mise à jour depuis une version inférieure à 1.3.0. Il vous sera probablement nécessaire de revoir votre configuration antérieure afin d'être conforme aux nouvelles directives. Veuillez consulter la documentation disponible dans le paquet proftpd-doc et modifier /etc/proftpd/ proftpd.conf en conséquence. #. Type: note #. Description #: ../proftpd.templates:17 msgid Unfortunately, it is nearly impossible currently to convert your setup automatically, but for some basic issues. You will have to do it yourself. ProFTPd could also be unable to use the resulting configuration, and it would not restart after upgrading. msgstr Malheureusement, il est à peu près impossible de convertir votre configuration automatiquement, sauf pour des points particulièrement simples. Vous devrez le faire vous-même. ProFTPd pourrait être incapable d'utiliser le fichier de configuration résultant et ne redémarrera donc pas après la mise à jour. #. Type: note #. Description #: ../proftpd.templates:17 msgid Note also that starting from 1.3.0 version, dynamic modules are used and configuration should be splitted, keeping modules loading instructions within the new
Bug#364401: mysql-dfsg-5.0: [INTL:fr] French debconf templates translation
Package: mysql-dfsg-5.0 Version: N/A Severity: wishlist Tags: patch l10n Please find attached the french debconf templates update, proofread by the debian-l10n-french mailing list contributors. If you do not already use it, please remember about the podebconf-report-po utility, which helps warning translators about changes when you modify some debconf templates in your packages. See its man page for details. The usual policy when using it is sending a warning to translators when you plan to upload a version of your package with debconf templates changes (EVEN TYPO CORRECTIONS). Then leave about one week for them to update their files (several translation teams have a QA process which requires time). podebconf-report-po will take care of sending the translators the needed material as well as getting the translators adresses from the PO files. All you have to do is just using the utility..:-) If you apply this policy, please forget about these remarks, of courseThis message is generic..:-) -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-686 Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) # translation of fr.po to French #Translators, if you are not familiar with the PO format, gettext #documentation is worth reading, especially sections dedicated to #this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # #Some information specific to po-debconf are available at #/usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans # #Developers do not need to manually edit POT or PO files. # # Christian Perrier [EMAIL PROTECTED], 2004, 2006. msgid msgstr Project-Id-Version: fr\n Report-Msgid-Bugs-To: [EMAIL PROTECTED] POT-Creation-Date: 2006-04-14 19:00+0200\n PO-Revision-Date: 2006-04-17 17:12+0200\n Last-Translator: Christian Perrier [EMAIL PROTECTED]\n Language-Team: French debian-l10n-french@lists.debian.org\n MIME-Version: 1.0\n Content-Type: text/plain; charset=ISO-8859-15\n Content-Transfer-Encoding: 8bit\n debian.org\n X-Generator: KBabel 1.11.2\n Plural-Forms: Plural-Forms: nplurals=2; plural=n1;\n #. Type: boolean #. Description #: ../mysql-server-5.0.templates:4 msgid Do you really want to downgrade? msgstr Voulez-vous vraiment revenir à la version précédente ? #. Type: boolean #. Description #: ../mysql-server-5.0.templates:4 msgid WARNING: The file /var/lib/mysql/debian-*.flag exists. This indicates that a mysql-server package with a higher version has been installed before. It can not be guaranteed that this version can use its data. msgstr Un fichier /var/lib/mysql/debian-*.flag est présent. Cela indique qu'une version plus récente du paquet mysql-server a été précédemment installée. Il n'est pas garanti que cette version puisse en utiliser les données. #. Type: note #. Description #: ../mysql-server-5.0.templates:11 msgid Important note for NIS/YP users! msgstr Note importante pour les utilisateurs NIS/YP #. Type: note #. Description #: ../mysql-server-5.0.templates:11 msgid To use mysql you must install an equivalent user and group to the following and ensure yourself that /var/lib/mysql has the right permissions (the uid/ gid may be different). msgstr Pour utiliser MySQL, vous devez créer un utilisateur et un groupe similaires à ce qui suit et vérifier que /var/lib/mysql possède les permissions appropriées (les identifiants numériques de groupe et d'utilisateur, uid et gid, peuvent être différents). #. Type: note #. Description #: ../mysql-server-5.0.templates:11 msgid /etc/passwd: mysql:x:100:101:MySQL Server:/var/lib/mysql:/bin/false msgstr /etc/passwd : mysql:x:100:101:MySQL Server:/var/lib/mysql:/bin/false #. Type: note #. Description #: ../mysql-server-5.0.templates:11 msgid /etc/group: mysql:x:101: msgstr /etc/group : mysql:x:101: #. Type: note #. Description #: ../mysql-server-5.0.templates:11 msgid /var/lib/mysql: drwxr-xr-x mysqlmysql msgstr /var/lib/mysql : drwxr-xr-x mysqlmysql #. Type: note #. Description #: ../mysql-server-5.0.templates:24 msgid Update Hints msgstr Informations sur les mises à jour #. Type: note #. Description #: ../mysql-server-5.0.templates:24 msgid You have to run \mysql_upgrade\ after the upgrade, else tables can be corrupted! This script also enhances the privilege tables but is not supposed to give any user more rights that he had before, msgstr Vous devez exécuter la commande « mysql_upgrade » après la mise à jour sinon les tables pourraient être corrompues. Ce script améliore également les tables de privilèges, sans toutefois donner à aucun utilisateur plus de droits qu'il n'en n'avait auparavant. #. Type: note #. Description #:
Bug#208344: Argh, locking...
severity 208344 important thanks Well, I looked at the e-mail logcheck just sent me, and I found this: gconfd (me-19567): Failed to get lock for daemon, exiting: Failed to lock '/tmp/gconfd-me/lock/ior': probably another process has the lock, or your operating system has NFS file locking misconfigured (Resource temporarily unavailable) I killall-9'ed gconfd-2 and removed that lock file, and now Newton's working. So I'm downgrading it back to important. The problem is, those crazy CORBA errors gave _no indication_ of the actual problem. The only way I discovered it was by logcheck notifying me of those entries in the logs, I was going to try rebooting today if I couldn't figure it out otherwise, and that would most likely have fixed it (the PID in the lockfile was the same as the running gconfd-2 process), and then the real problem might still not be known. Remember that I looked for those lock files that were listed in the earlier reports, but I'm guessing that the location of the gconf lockfile has changed since then. pgp9x3xebdjGr.pgp Description: PGP signature
Bug#364399: openswan: [INTL:fr] French debconf templates translation
Package: openswan Version: N/A Severity: wishlist Tags: patch l10n Please find attached the french debconf templates update, proofread by the debian-l10n-french mailing list contributors. If you do not already use it, please remember about the podebconf-report-po utility, which helps warning translators about changes when you modify some debconf templates in your packages. See its man page for details. The usual policy when using it is sending a warning to translators when you plan to upload a version of your package with debconf templates changes (EVEN TYPO CORRECTIONS). Then leave about one week for them to update their files (several translation teams have a QA process which requires time). podebconf-report-po will take care of sending the translators the needed material as well as getting the translators adresses from the PO files. All you have to do is just using the utility..:-) If you apply this policy, please forget about these remarks, of courseThis message is generic..:-) -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-686 Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) # translation of fr.po to French # # # # # Christian Perrier [EMAIL PROTECTED], 2004, 2006. msgid msgstr Project-Id-Version: fr\n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2006-04-17 05:04-0600\n PO-Revision-Date: 2006-04-17 18:59+0200\n Last-Translator: Christian Perrier [EMAIL PROTECTED]\n Language-Team: French debian-l10n-french@lists.debian.org\n MIME-Version: 1.0\n Content-Type: text/plain; charset=ISO-8859-15\n Content-Transfer-Encoding: 8bit\n X-Generator: KBabel 1.11.2\n Plural-Forms: Plural-Forms: nplurals=2; plural=n1;\n #. Type: select #. Choices #: ../openswan.templates.master:3 msgid earliest, \after NFS\, \after PCMCIA\ msgstr Le plus tôt possible, Après NFS, Après PCMCIA #. Type: select #. Description #: ../openswan.templates.master:5 msgid At which level do you wish to start Openswan ? msgstr Étape de lancement d'Openswan : #. Type: select #. Description #: ../openswan.templates.master:5 msgid With the current Debian startup levels (nearly everything starting in level 20), it is impossible for Openswan to always start at the correct time. There are three possibilities when Openswan can start: before or after the NFS services and after the PCMCIA services. The correct answer depends on your specific setup. msgstr Avec les niveaux de démarrage actuellement utilisés par Debian (presque tout démarre au niveau 20), il est impossible de faire en sorte qu'Openswan démarre toujours au moment approprié. Il existe trois moments où il est opportun de le démarrer : avant ou après les services NFS, ou après les services PCMCIA. La réponse appropriée dépend de vos réglages spécifiques. #. Type: select #. Description #: ../openswan.templates.master:5 msgid If you do not have your /usr tree mounted via NFS (either you only mount other, less vital trees via NFS or don't use NFS mounted trees at all) and don't use a PCMCIA network card, then it's best to start Openswan at the earliest possible time, thus allowing the NFS mounts to be secured by IPSec. In this case (or if you don't understand or care about this issue), answer \earliest\ to this question (the default). msgstr Si votre arborescence /usr n'est pas un montage NFS (soit parce que vos montages NFS sont à d'autres endroits, moins critiques, soit parce que vous n'utilisez pas du tout de montage NFS) et si vous n'utilisez pas de carte réseau PCMCIA, il est préférable de démarrer Openswan le plus tôt possible, ce qui permettra de sécuriser les montages NFS avec IPSec. Dans ce cas (ou bien si vous ne comprenez pas l'objet de la question ou qu'elle ne vous concerne pas), choisissez « le plus tôt possible », qui est le choix par défaut. #. Type: select #. Description #: ../openswan.templates.master:5 msgid If you have your /usr tree mounted via NFS and don't use a PCMCIA network card, then you will need to start Openswan after NFS so that all necessary files are available. In this case, answer \after NFS\ to this question. Please note that the NFS mount of /usr can not be secured by IPSec in this case. msgstr Si /usr est un montage NFS et que vous n'utilisez pas de carte réseau PCMCIA, vous devrez alors démarrer Openswan après les services NFS afin que tous les fichiers nécessaires soient disponibles. Dans ce cas, choisissez « Après NFS ». Veuillez noter que le montage NFS de /usr n'est alors pas sécurisé par IPSec. #. Type: select #. Description #: ../openswan.templates.master:5 msgid If you use a PCMCIA network card for your IPSec connections, then you only have to choose to start it after the PCMCIA services. Answer \after PCMCIA \ in this case. This is also the correct answer if you want to fetch keys from a locally running
Bug#335867: libglew1: Newer upstream version is available
On Saturday 22 April 2006 21:54, Arnaud Quette wrote: 2006/4/22, Marcelo E. Magallón [EMAIL PROTECTED]: On 4/22/06, Joost Yervante Damad [EMAIL PROTECTED] wrote: An 1.3.4 package is about to be uploaded by Marcello. Actually I did upload it on Friday morning... didn't it make to the archive? *sigh* seems not! I've quickly done some work yesterday on 1.3.4. If you whish to take a look at the diff, tell me so and I'll send you privatly. Arnaud Hi Arnaud, FYI, my updated package can be found at http://mentors.debian.net/debian/pool/main/g/glew/ Greetings, Joost -- The planet Andete is famous for it's killer edible poets. pgpCKHzy29EAv.pgp Description: PGP signature
Bug#363250: general: Custom PAGER gives error on sid, but works on sarge
On 22 Apr 2006, Loïc Minier outgrape: On Sat, Apr 22, 2006, Manoj Srivastava wrote: There are two use cases that any pager directive must address: 1) The program is going to generate output which must be piped to a pager 2) The program want to send a file to the user. I agree that these use cases need to be supported. But perhaps the policy for Debian should be for programs to ignore PAGER and just use sensible pager, where all the logic for dealing with pager goes in. I still don't see how sensible pager can handle the pipeline vs the non-pipeline case, though. Yes, I believe the policy should be changed in this way, and as I proposed. Hmm. This could be a potentially disruptive change -- since a lot of programs may need to be changed in non-trivial ways. Look at the code of sensible-pager, it will call $PAGER if sensible-pager is called without any argument, and $PAGER filename if it's called as sensible-pager filename. This seems good enough for me; if people set $PAGER to a pipeline, they might suffer from problems for the second case, but we can work on that. Err, so we can't make this policy (allowing $PAGER to be a pipeline) until we have a solution for this, given that we have agreed that the two use cases for $PAGER must be feasible. Barring that, policy would have to be that programs can' t user PAGER to work with use case 2, and must be guilty of an useless use of cat to pipe data to STDIN for PAGER. Yes, if you mean that permitting pipelines forbids programs to call $PAGER $file, I agree with you. There are multiple ways to solve this, but I think that whatever way is chosen should be implemented in sensible-pager, and we can even change our mind later, and fix only sensible-pager. The contract of sensible-pager with respect to Debian programs should be to offer two modes of operation, the pipe of data on stdin mode, and the pass a file on the command line mode (matching your use cases 1 and 2). PAGER has the benefit of being long standardized, and if we do not use PAGER, we are breaking user expectations. What is the benefit of creating a PAGER clone? sensible-pager is not a PAGER clone, it permits us to enhance the handling of $PAGER in a single place instead of changing every program in Debian that wants to send something to $PAGER. The point is that lots of programs already respect $PAGER, with varying semantics (most support $PAGER being less or more or something, but not all support arbitary pipelines. B/ user configuration of the pager When defined, $PAGER is a sh pipeline which reads its data from stdin. How do programs present a text file to the user using a PAGER, then? cat file.txt | $PAGER? That's a question for sensible-pager to solve, but one way is to use cat $@ | $PAGER indeed. Umm. If we are talking about making policy, we can't just make policy and say things are a problem for some package or the other to solve. In other words, ignore $PAGER, use sensible-pager all over, and let that handle it? Yes. Not, unless these questions are answered, and we actually have a working implementation. Well the current implementation works, except for pipelines. :) Since allowing pipelines seems to be the motivating factor here, we do need to solve that, I think. manoj -- I am here by the will of the people and I won't leave until I get my raincoat back.- a slogan of the anarchists in Richard Kadrey's Metrophage Manoj Srivastava [EMAIL PROTECTED] http://www.debian.org/%7Esrivasta/ 1024D/BF24424C print 4966 F272 D093 B493 410B 924B 21BA DABB BF24 424C
Bug#364385: localechooser almost tripled in size...
Breakdown on size increase since 1.03 is: - 30k added to templates file - 1k added to /usr/bin/localechooser - 1k added to /usr/lib/post-base-installer.d/05localechooser - 1k removed from languagelist I don't see how this could sum to the 230k indicated by what you pasted though. In 1.06, I introduced a bug when I removed the crafted intltool-merge which allowed partial translations for country names. I unfortunately ommited the document this properly because it was discovered while working on something else (beat me) but then it got fixed and localechooser got the country names translations back...and its huge size back In the meantime, some languages were added, which explains the templates file size increase noticed by Joey. Of course, the size of this templates file is a problem but I fail to see how to do differently if we want to have the country names translated. The scripts in localechooser are heavily commented. One way to grab some bytes back could be filtering these comments during the package build. This would of course make debugging a little more complicated when working in the installer itself but that could be worth it. This saves about 5k in /usr/bin/localechooser signature.asc Description: Digital signature
Bug#364386: texmacs: Segmentation fault at startup
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Michael Ekstrand [EMAIL PROTECTED] writes: Hello Michael, TeXmacs (both 1.0.6-5 from unstable and 1.0.6-3 from testing) segfaults at starup, both when a TeXmacs file is specified on the command line and when one is not. Hm, I don't see this. :-/ Could you please try if it works when you move your TeXmacs directory out of the way? I.e. move ~/.TeXmacs somewhere else and try start it. A core dump file can be provided upon request. Since I am unable to make it crash, a core dump file would be really nice. Upload it somewhere or send it to my E-Mail address directly. Along with a core file, your configuration might be interesting to me. (the scm files in .TeXmacs/system) René - -- 0662 B928 E386 E2EF 0E8A E2EE C26D 3034 7C71 4C78 http://progn.org http://www.debian.org http://www.pro-linux.de -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.3 (GNU/Linux) iQCVAwUBREse/GXAXAFwWYizAQJxIgQAqspNlCw80uXTE/YgWm3f8Y1bUR9SMfb0 x7TssW6lKNshArYuhVKiczcOp+RfEMpc1aYxSMnhjYBPmJxPjozwHFj0k9Od40fS Jb0NcSBJgOFuwleX5HqsrXCN2jW9WMnsOX2aZXp9tZt5CXlctOKS4nF4wuSmkycQ VuVpmAXiVyw= =p9dh -END PGP SIGNATURE-
Bug#364385: localechooser almost tripled in size...
A check against an older image shows that the main culprit is localechooser: 108758 B - 136 blocks - 10 files from localechooser.udeb (version 1.06) 344544 B - 360 blocks - 10 files from localechooser.udeb (version 1.12) Is it possible to bring that down again a bit please? Don't we already drop translations in floppy builds. Which means that the main culprit, ie the templates file, should be shorten down. -- signature.asc Description: Digital signature
Bug#364402: libapr0: please move its section to libs, instead of net
Package: libapr0 Version: 2.0.55-4 Severity: wishlist While auditing the installation of my systems, I noticed that libapr0 is packaged under section net. My naïve impression would be that its proper place would be in section libs, instead. I know that changing the section and priority of packages may be troublesome, since they have to be approved by the ftpmasters, but I just wanted to file this whishlist bug in case you happen to agree. Thanks. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: powerpc (ppc) Shell: /bin/sh linked to /bin/dash Kernel: Linux 2.6.17-rc1-5 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Bug#364403: [INTL:nl] New dutch po-debconf translation
Package: gpm version: 1.19 Severity: wishlist Tags: patch l10n Please find attached the dutch po-debconf translation. This translation has been vetted by the review process of the debian-l10n-dutch team. Please add it to your next package revision, it should be inserted in your package build-tree as debian/po/nl.po, TIA. Feel free to mail me if this file needs updating at some future date. Thanks and regards, Esther Hanko # translation of nl.po to # #Translators, if you are not familiar with the PO format, gettext #documentation is worth reading, especially sections dedicated to #this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' #Some information specific to po-debconf are available at #/usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans# #Developers do not need to manually edit POT or PO files. # # Esther Hanko [EMAIL PROTECTED], 2006. msgid msgstr Project-Id-Version: nl\n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2005-04-16 01:20-0500\n PO-Revision-Date: 2006-03-30 16:43+0200\n Last-Translator: Esther Hanko [EMAIL PROTECTED]\n language-team: Nederlandse debian-l10n-dutch@lists.debian.org\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n Language-Team: debian-l10n-dutch@lists.debian.org\n X-Generator: KBabel 1.11.1\n #. Type: boolean #. Description #: ../gpm.templates:4 msgid Do you want to start or restart GPM while X is running? msgstr Wilt u GPM starten of herstarten terwijl X actief is? #. Type: boolean #. Description #: ../gpm.templates:4 msgid Usually, GPM should be started or restarted when it is installed or upgraded. But when X is running and trying to use the same mouse device, this can sometimes cause a problem with the X mouse cursor. Switching to the console and then back to X will usually fix it. msgstr Normaal gesproken zou GPM moeten worden gestart of herstart wanneer het geïnstalleerd of opgewaardeerd wordt. Echter, als X ook actief is en de muis op hetzelfde muisapparaat probeert te gebruiken, zou dit een probleem kunnen vormen met de X muiscursor. Wisselen naar een console en dan terug naar X zal dit meestal oplossen. #. Type: string #. Description #: ../gpm.templates:12 msgid Which mouse device should gpm use? msgstr Welk muisapparaat moet gpm gebruiken? #. Type: string #. Description #: ../gpm.templates:12 msgid Where is your mouse device? If you have a regular PS/2 mouse, you probably want /dev/psaux. If you have a serial mouse, it may be something like /dev/ ttyS0. If you have a usb mouse (make sure you have the modules loaded), it's /dev/input/mice. If you're on a Sun machine, it's probably /dev/ sunmouse. If you're on an 68k Macintosh, it's probably /dev/mouse. msgstr Waar staat het muisapparaat? Als u een reguliere PS/2-muis heeft, is dat waarschijnlijk /dev/psaux. As u een seriële muis heeft, zou het iets kunnen zijn als /dev/ttyS0. Als u een usb-muis heeft (zorg er dan ook voor dat u de juiste modules geladen heeft), is het /dev/input/mice. Als dit een Sun-machine is, is het waarschijnlijk /dev/sunmouse. Als u op een 68k Macintosh werkt, is het waarschijnlijk /dev/mouse. #. Type: string #. Description #: ../gpm.templates:21 msgid What type is your mouse? msgstr Wat voor soort muis heeft u? #. Type: string #. Description #: ../gpm.templates:21 msgid Available mouse types are: msgstr Beschikbare muistypes zijn: #. Type: string #. Description #: ../gpm.templates:21 msgid Name Description msgstr NaamOmschrijving #. Type: string #. Description #: ../gpm.templates:21 msgid PS/2 mice: round 6-pin connector\n autops2Most PS/2 mice; specific protocol will be auto-detected.\n Also use this for USB and ADB mice.\n ps2Standard PS/2 mice, 2 or 3 buttons\n imps2 Microsoft IntelliMouse and compatibles; PS/2 mice with\n 3 buttons and a scroll wheel\n exps2 Newer Microsoft IntelliMouse and compatible, may have\n more than 3 buttons. Most newer PS/2 mice are this type.\n synps2 Synaptics PS/2 TouchPad, found on many laptops\n netmouse Genius NetMouse, 2 normal buttons plus an \Up/Down\ button\n fups2 Same as \ps2\ but may be needed for certain broken\n mice or KVM switches\n fuimps2Same as \imps2\ but may be needed for certain broken\n mice or KVM switches msgstr PS/2-muizen: ronde zespinsconnector\n autops2Voor de meeste PS/2-muizen zal het precieze protocol\n automatisch gedetecteerd worden.\n Gebruik dit ook voor USB- en ADB-muizen.\n ps2Standaard PS/2-muis, met twee of drie muisknoppen\n imps2 Microsoft IntelliMouse en dergelijke; PS/2 muizen met\n 3 knoppen en een muiswiel\n exps2 Recente Microsoft IntelliMouse en dergelijke, mogelijk met\n meer dan 3 knoppen; meer recente
Bug#59988: Dropping this BR that will never be fixed, at least in user-setup
tags 59988 wontfix thanks I very highly doubt that we add support for external user databases in D-I. Neither in the near future, nor in long term. This bug is assigned to suer-setup because it's inherited from base-config but I really see no point in keeping it opened for no reason. Without further notice, I'll close it in the next bug cleaning round for user-setup -- signature.asc Description: Digital signature
Bug#364404: lifelines: new fr.po (proposal)
Package: lifelines Version: 3.0.50-2 Severity: normal Hi, Some strings are not translated in fr.po for lifelines and the bug (#356671) i reported last month is still present. So i propose (in attachment) a new fr.po for lifelines based on Patrick Texier's one (updated last January). I've just applied the patch i proposed last month for the bug (#356671). This patch is in attachment too. I tested my lifelines.po on my system and it works fine. HTH -- Bernard Adrian -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing') Architecture: i386 (i586) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.24-xfs Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages lifelines depends on: ii libc6 2.3.6-7GNU C Library: Shared libraries ii libncursesw5 5.5-1.1Shared libraries for terminal hand lifelines recommends no packages. -- no debconf information fr.adrian.po.gz Description: new fr.po for fifelines (proposal) diff -c /home/bernard/fr.texier.po /home/bernard/fr.adrian.po --- /home/bernard/fr.texier.po 2006-04-22 22:58:45.0 +0200 +++ /home/bernard/fr.adrian.po 2006-04-22 22:15:15.0 +0200 @@ -7,7 +7,7 @@ msgstr Project-Id-Version: Lifelines 3.0.50\n POT-Creation-Date: 2005-09-16 20:23-0400\n -PO-Revision-Date: 2006-04-22 22:58+0200\n +PO-Revision-Date: 2006-04-22 22:15+0200\n Last-Translator: Patrick Texier [EMAIL PROTECTED]\n Language-Team: Not a language team\n MIME-Version: 1.0\n @@ -340,7 +340,7 @@ #: src/gedlib/messages.c:97 msgid Identify one of the child's parents, if known. -msgstr Identifiez un des enfants, si connu. +msgstr Identifiez un des parents de l'enfant, si connu. #: src/gedlib/messages.c:99 msgid Scan results: Diff finished. Sat Apr 22 23:00:08 2006
Bug#336501: Fatal Error: File /usr/lib/smarteiffel/ seems to be empty
Hi, you need to set $SmartEiffel to '/usr/lib/smarteiffel/system.se', not to '/usr/lib/smarteiffel'. The manpage will be updated with the next upload. Regards, Daniel -- Address:Daniel Baumann, Burgunderstrasse 3, CH-4562 Biberist Email: [EMAIL PROTECTED] Internet: http://people.panthera-systems.net/~daniel-baumann/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#361139: acidbase: new upstream release fixes it
tags 361139 + patch thanks I've attached a diff.gz for the new upstream release, which fixes the security problem. I also fixed some other things in the package - lintian errors/warnings and other bugs. Changelog entry: acidbase (1.2.4-0.1) unstable; urgency=medium * Non-maintainer upload. * New upstream release + Fixes authentication bypass (CVE-2006-1505) (Closes: #361139) + Update 01_default_config and 02_update_external_links patches + Remove executable bit on includes/fpdf_class.php to satisfy lintian * Fix watch file using uscan sf.net support * Update copyright file with more information * Move po-debconf to Build-Depends-Indep * Remove short description from long description * Add extra space before Homepage * Add Swedish debconf translation by Daniel Nylander (Closes: #348881) * Add Portuguese debconf translation by Carlos Lisboa (Closes: #349597) * Add French debconf translation by Steve Petruzzello (Closes: #351230) -- Paul Wise [EMAIL PROTECTED] Sun, 23 Apr 2006 14:10:40 +0800 -- bye, pabs http://wiki.debian.org/PaulWise acidbase_1.2.4-0.1.diff.gz Description: GNU Zip compressed data signature.asc Description: This is a digitally signed message part
Bug#336501: Fatal Error: File /usr/lib/smarteiffel/ seems to be empty
Damn, I mean '/usr/lib/smarteiffel/sys/system.se'. -- Address:Daniel Baumann, Burgunderstrasse 3, CH-4562 Biberist Email: [EMAIL PROTECTED] Internet: http://people.panthera-systems.net/~daniel-baumann/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364307: gnome-desktop-data: Failed to upgrade package using apt-get or dpkg
Hi, On Sat, Apr 22, 2006, Alexandre Norman wrote: noodle:/tmp# dpkg -i gnome-desktop-data_2.14.0-1_all.deb Selecting previously deselected package gnome-desktop-data. (Reading database ... dpkg: error processing gnome-desktop-data_2.14.0-1_all.deb (--install): files list file for package `gnome-desktop-data' contains empty filename You can try the --force switch, or use ar to decompress the package manually until you at least restore the file list: ar t foo.deb ar x foo.deb data.tar.gz etc. -- Loïc Minier [EMAIL PROTECTED] You can gtk_main_run, but you can't gtk_widget_hide. --danw, 19-jul-04
Bug#364395: sasl2-bin fail when upgrade or reinstall
Package: sasl2-bin Version: 2.1.19.dfsg1-0.1 Followup-For: Bug #364395 Setting up sasl2-bin (2.1.19.dfsg1-0.1) ... Starting SASL Authentication Daemon: (failed). invoke-rc.d: initscript saslauthd, action start failed. dpkg: error processing sasl2-bin (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: sasl2-bin E: Sub-process /usr/bin/dpkg returned an error code (1) -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.14-2-k7 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages sasl2-bin depends on: ii base-passwd 3.5.11 Debian base system master password ii libasn1-6-hei 0.7.2-4Libraries for Heimdal Kerberos ii libc6 2.3.6-7GNU C Library: Shared libraries ii libcomerr21.38+1.39-WIP-2006.04.09-1 common error description library ii libdb4.2 4.2.52-24 Berkeley v4.2 Database Libraries [ ii libgssapi4-he 0.7.2-4Libraries for Heimdal Kerberos ii libkrb5-17-he 0.7.2-4Libraries for Heimdal Kerberos ii libldap2 2.1.30-13 OpenLDAP libraries ii libpam0g 0.79-3.1 Pluggable Authentication Modules l ii libroken16-he 0.7.2-4Libraries for Heimdal Kerberos ii libsasl2 2.1.19.dfsg1-0.1 Authentication abstraction library ii libssl0.9.8 0.9.8a-8 SSL shared libraries sasl2-bin recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364398: info from xorg log
forgot to add this: everything in Xorg.log looks kosher, only it cuts off abrubtly at the very end. Here are the last several lines: (**) NVIDIA(0): DPMS enabled (II) Loading extension NV-CONTROL (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) Initializing extension GLX (END) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364405: java-package: make-jpkg does not work with ibm-java2-jre-50-linux-ppc64.tgz
Package: java-package Version: 0.27 Severity: normal Dear maintainer, Although listed in /usr/share/doc/java-package/SUPPORTED, ibm-java2-jre-50-linux-ppc64.tgz could not be used by make-kpkg on my installation: sorbet【src】$ make-jpkg ibm-java2-jre-50-linux-ppc64.tgz Creating temporary directory: /tmp/make-jpkg.NXynvG Loading plugins: blackdown-j2re.sh blackdown-j2sdk.sh common.sh ibm-j2re.sh ibm-j2sdk.sh j2re.sh j2sdk-doc.sh j2sdk.sh j2se.sh sun-j2re.sh sun-j2sdk-doc.sh sun-j2sdk.sh No matching plugin was found. Removing temporary directory: done The 32 bit version went fine, however... I am running a etch/sid mix on a iMac G5. Best regards, -- Charles Plessy Wako, Saitama, Japan -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: powerpc (ppc64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16farm Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Versions of packages java-package depends on: ii coreutils 5.2.1-2.1 The GNU core utilities ii debhelper 5.0.22 helper programs for debian/rules ii fakeroot 1.5.7 Gives a fake root environment ii unzip 5.52-6 De-archiver for .zip files java-package recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#359153: patch from a suse list?
Hi! I experience this too. I first had no problem using the version kdebluetooth/0.99+1.0beta1-6-b1. It first worked, then i played around with hidd, pin-helper and perhaps installing some packages around bt like syncing, obex stuff and so on. After my mouse and keyboard finally worked the browsing did no more. I found a promising patch for suse-10 here: http://www.linux-club.de/ftopic57788.html sadly it seems to have some problems with encoding... i paste it here... -snip- Hallo! Danke für die Tipps zum Bluetooth-Browsing-Problem hier! Ich habe mal das Paket aus dem inoffizielle KDE 3.5.2 von SuSE 10.0 kdebluetooth-0.0.svn20051202-10 so gepatcht, dass es wieder klappt. Weil ich nicht das Original SuSE-openobex verwende, sondern openobex-1.2-0.pm.0 von Packman, musste ich noch eine Kleinigkeit im Build-System von kdebluetooth ändern (openobex-config - pkg-config). Unten findet ihr meinen Patch, den man wie folgt verwendet: 1) Angehängten Patch speichern als kdebluetooth-0.0.svn20051202-10.tv-fix-browsing.patch 2) Das Source-Package von kdebluetooth runterladen und installieren: rpm -ihv kdebluetooth-0.0.svn20051202-10.src.rpm 3) Dann ins RPM-Build-Verzeichnis gehen (meist /usr/src/packages) und patchen: patch -p0 /woauchimmer/kdebluetooth-0.0.svn20051202-10.tv-fix-browsing.patch 4) Neu kompilieren: cd SPECS; rpmbuild -ba kdebluetooth.spec (wenn da was meckert, muss man wohl noch die gelisteten -devel-Pakete installieren). Hoffe, das klappt so auch bei Euch! Tilman Code: diff -rNU2 ../packages.orig/SOURCES/kdebluetooth-fix-browsing.diff ./SOURCES/kdebluetooth-fix-browsing.diff --- ../packages.orig/SOURCES/kdebluetooth-fix-browsing.diff 1970-01-01 01:00:00.0 +0100 +++ ./SOURCES/kdebluetooth-fix-browsing.diff 2006-04-21 11:29:36.0 +0200 @@ -0,0 +1,109 @@ +Index: kdebluetooth-common/mimetypes/phone-device-class.desktop +=== +--- kdebluetooth-common/mimetypes/phone-device-class.desktop (revision 527167) kdebluetooth-common/mimetypes/phone-device-class.desktop (working copy) +@@ -3,6 +3,7 @@ + Type=MimeType + MimeType=bluetooth/phone-device-class + Icon=kaddressbook ++X-KDE-IsAlso=inode/directory + Comment=Phone Bluetooth Device + Comment[bg]=Телефонно Bluetooth уÑтройÑтво + Comment[da]=Telefon Bluetooth-enhed +Index: kdebluetooth-common/mimetypes/misc-device-class.desktop +=== +--- kdebluetooth-common/mimetypes/misc-device-class.desktop (revision 527167) kdebluetooth-common/mimetypes/misc-device-class.desktop (working copy) +@@ -3,6 +3,7 @@ + Type=MimeType + MimeType=bluetooth/misc-device-class + Icon=kdebluetooth ++X-KDE-IsAlso=inode/directory + Comment=Miscellaneous Bluetooth Device + Comment[bg]=Разни Bluetooth уÑтройÑтва + Comment[da]=Diverse Bluetooth-enheder +Index: kdebluetooth-common/mimetypes/computer-device-class.desktop +=== +--- kdebluetooth-common/mimetypes/computer-device-class.desktop (revision 527167) kdebluetooth-common/mimetypes/computer-device-class.desktop (working copy) +@@ -3,6 +3,7 @@ + Type=MimeType + MimeType=bluetooth/computer-device-class + Icon=konsole ++X-KDE-IsAlso=inode/directory + Comment=Computer/PDA Bluetooth Device + Comment[bg]=Компютърно/PDA Bluetooth уÑтройÑтво + Comment[bs]=RaÄunar/PDA Bluetooth ureÄ‘aj +Index: kioslave/bluetooth/bluetooth.protocol +=== +--- kioslave/bluetooth/bluetooth.protocol (revision 527167) kioslave/bluetooth/bluetooth.protocol (working copy) +@@ -4,6 +4,7 @@ + input=none + output=filesystem + reading=true ++listing=Name,Type,Size,Date,AccessDate,Access,Owner,Group,Link + Icon=kdebluetooth + Description=Bluetooth inquiry protocol + Description[bg]=Протокол за заÑвка към Bluetooth +Index: kioslave/bluetooth/kiobluetooth.cpp +=== +--- kioslave/bluetooth/kiobluetooth.cpp (revision 527167) kioslave/bluetooth/kiobluetooth.cpp (working copy) +@@ -64,6 +64,7 @@ + if (url.hasHost() == false path == /) + { + createDirEntry(entry, Bluetooth neighborhood); ++statEntry(entry); + finished(); + } + else { +@@ -284,7 +285,8 @@ + + addAtom(entry, UDS_MIME_TYPE, mimeType); + addAtom(entry, UDS_FILE_TYPE, S_IFDIR); +-addAtom(entry, UDS_GUESSED_MIME_TYPE, inode/folder); ++// No more necessary ++// addAtom(entry, UDS_GUESSED_MIME_TYPE, inode/directory); + + return true; + } +Index: kioslave/sdp/btsdp.protocol
Bug#337904: This bug worth being fixed but needs code rewrite in user-setup-ask
This bug is IMHO the only one worth being fixed in suer-setup (small) bug log. However, looking at it, I found that it needs a deeper rewrite of the state machine than I initially imagined. Hence leaving it as is for the moment...until someone a bit less likely to break everything to look at it (hint hint). -- signature.asc Description: Digital signature
Bug#364319: acknowledged by developer (Re: Bug#364319: base-files: [patch] /etc/profile to support *ksh shells (proper PS1 setting))
reopen 364319 ! thanks | Package: base-files | Version: 3.1.12 | Severity: normal | Tags: patch | | When a ksh shell is invoked, it reads /etc/profile. However there is no | setting of PS1 for ksh shells, only for bash: | | This is not true. The following code works when the shell is not bash: | | if [ `id -u` -eq 0 ]; then | PS1='# ' | else | PS1='$ ' | fi | A better /etc/profile for Debian's ksh, pdksh and mksh compatible | setting is presented below. | | Sure, but that would make /etc/profile more bloated, which I consider | a bad thing, not to mention there will never be a prompt shell to | satisfy everybody. It is incorreect to close a bug report by mere a opinion. There is clear bug in the base-files: - It set's the BASH prompt to reasonable default - BUT, It does not handle *ksh shells simlilarly at all The one that you point point out above is code that is used as a fallback to set PS1, when the shell (dash, posh ...) does not support any good PS1 setting. | Thanks for the suggestion, but for a shell which is not the default | shell, and it's not even installed by default, I think it is better | that you change /etc/profile to suit your needs, which do not have to | match everybody else's neeeds. Ksh is widely recognized shell. The Debian base-files is installed to every system. With this logic every people on earth who happens to download and install a *ksh shell would need to much around with the /etc/profile, not to count that that all are not necessarily administrators. The system should have reasonable default right from installation. Right now it is not the case for *ksh shella. The change proposed is very small, efective and provides prompt that serves the default setting better. How can PS1='$ ' be any substitute for standard de facto prompt, that can show a path name? If there is default for bash, which people are accustomed to be seeing, I can't see how an argument suit your needs, which do not have to match everybody else's neeeds can hold water. The *ksh setting matches that of the current bash's setting. I propose that this matter is discussed in more wider audience before resolution and marking it to closed. Please suggest correct forum to bring this issue forward if this change cannot be applied. Jari -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364084: liferea: don't blindly call dbus-launch on startup
Lars Lindner wrote: Am Freitag, den 21.04.2006, 17:18 -0500 schrieb David Moreno Garza: tags 364084 upstream Released with 1.0.10. I also moved the eval command so that is executed before each possible run_with_mozilla() call. Thanks, I've uploaded 1.0.10 tonight. -- David Moreno Garza [EMAIL PROTECTED] | http://www.damog.net/ [EMAIL PROTECTED] | GPG: C671257D Una gran cantidad de defectos definen un estilo. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364299: vim-common from experimental fails to install
clone 364299 -1 reassign -1 manpages-pl 20060331-1 thanks James Vega wrote: I'll add conflicts for manpages-it and manpages-pl (= their current version). Please use `Replaces:' instead of `Conflicts:' and that will be sufficient. I think we should coordinate with Francesco and Robert It's not necessary. The next version of manpages-pl will have the vim pages removed, however you don't need to postpone uploading new vim and waiting for new manpages-pl. Regards, robert -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364370: Build-Dep on mozilla (library), please transition to xulrunner
Guilherme de S. Pastore [EMAIL PROTECTED] writes: Em Dom, 2006-04-23 Ã s 00:57 +0200, Marc 'HE' Brockschmidt escreveu: It looks like your package still depends on a mozilla library in testing. It's already transitioned in our SVN repo, but it's waiting for evolution to transition before it can be uploaded. I know, i saw that later (when I wanted to fix that on my own). I even updated the changelog to close the bug, but then I noticed that I only had a read-only svn checkout... Yeah, I'm lazy. Marc -- BOFH #268: Neutrino overload on the nameserver pgpMZJ9Hp8ekQ.pgp Description: PGP signature
Bug#361004: carpaltunnel: 361004: patch to use default python
tags 361004 + patch thanks I prepared the attached patch to carpaltunnel that makes it use optparse if available, and optik otherwise. It updates the dependencies and changelog too. This package could use an overhaul and switching to a non-native package -- bye, pabs http://wiki.debian.org/PaulWise carpaltunnel-361004-python-2.3-compatability.patch.gz Description: GNU Zip compressed data signature.asc Description: This is a digitally signed message part
Bug#364407: gv: Cannot start GV
Package: gv Version: 1:3.6.1-13 Severity: grave Justification: renders package unusable After upgrading to Xorg, GV fails to start and gives the following error message: 10:33:39 [EMAIL PROTECTED] 2005-2-eaf1]$ gv Warning: Cannot convert string -*-Helvetica-Medium-R-Normal--*-140-*-*-P-*-ISO8859-1 to type FontStruct Warning: Unable to load any usable ISO8859 font Warning: Unable to load any usable ISO8859 font Segmentation fault -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.14 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages gv depends on: ii gs 8.50-1.1Transitional package ii gs-esp [gs] 8.15.1.dfsg.1-2 The Ghostscript PostScript interpr ii gs-gpl [gs] 8.50-1.1The GPL Ghostscript PostScript int ii libc62.3.6-7 GNU C Library: Shared libraries ii libice6 1:1.0.0-3 X11 Inter-Client Exchange library ii libsm6 1:1.0.0-4 X11 Session Management library ii libx11-6 2:1.0.0-6 X11 client-side library ii libxext6 1:1.0.0-4 X11 miscellaneous extension librar ii libxmu6 1:1.0.1-3 X11 miscellaneous utility library ii libxpm4 1:3.5.4.2-3 X11 pixmap library ii libxt6 1:1.0.0-4 X11 toolkit intrinsics library ii xaw3dg 1.5+E-11Xaw3d widget set gv recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364396: no VTS_TMAPT
... thoggen printed onto terminal text I provided below (including the Please send bug report - no VTS_TMAPT ?? message). That message comes from libdvdread not Thoggen. Thoggen can't really do anything about that. If it works otherwise, I'd just ignore the message. I presume you also get that message when you're playing the DVD via mplayer/vlc/xine/whatever? Cheers -Tim -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364100: openafs-fileserver tuning
On Sat, 22 Apr 2006, Russ Allbery wrote: Niklas Edmundsson [EMAIL PROTECTED] writes: Package: openafs-fileserver Version: 1.4.1-2 We had various performance-issues with 1.4.0, and during that debugging we found out that the problem was made even worse by the fact that the openafs fileserver is started without any tuning options. Since our fileserver was initially installed using an older package, this might be fixed now, and in that case I appologise. The interesting line in /etc/openafs/BosConfig should be modified to include: parm /usr/lib/openafs/fileserver -p 23 -busyat 600 -rxpck 400 -s 1200 -l 1200 -cb 65535 -b 240 -vc 1200 The above tuning is recommended according to Harald Barth, for the following reasons: * It's unclear what the defaults are unless you dig into the source. * Modern hardware have no problem with increasing buffers and threads a bit. * Having too few threads will cause your fileserver to stall if too many threads ends up waiting for something (breaking callbacks and timing out, whatever). My ideal would be to get the defaults fixed, of course, but in the meantime I can see the argument that relying on the current defaults is a bad idea. I think this only affects the afs-newcell command and the documentation, though; in general, AFS leaves it to you to set up your fileserver command however you want it, and only the Debian afs-newcell automated cell creation script encodes parameters (or lack thereof). OK. We use: -L -p 125 -rxpck 400 -busyat 200 -cb 65535 but I think that may actually be too many threads. I'm curious about the differences. Ideally, before picking defaults to put into the documentation, I'd like this to be discussed on openafs-info towards some sort of consensus (which is where the current client cache parameters came from). If you have a chance and are willing to start that conversation, that would be great; if not, I'll try to do so in the not too distant future. The thread-count is/was capped at 23 I think, but I'll let Harald confirm/deny that. As you might have figured out I'm rather clueless when it comes to openafs fileserver tuning, so I think it's better if you initiate the discussion on openafs-info. /Nikke -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Niklas Edmundsson, Admin @ {acc,hpc2n}.umu.se |[EMAIL PROTECTED] --- People are strange when you're a stranger. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#344251: unclear liboil description
Heya, I, for example, now know that liboil contains optimized versions of different functions, it's choosing the fastest function at run-time, uses processor-specific hacks and blabla. But I still have no idea *which* function were optimized there. Sound decoding? Video processing? Searching? Sorting? At least a general description would be nice. Marc -- BOFH #349: Stray Alpha Particles from memory packaging caused Hard Memory Error on Server. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364408: synfigstudio: FTBFS (amd64): cast from 'studio::DockDialog*' to 'int' loses precision
Package: synfigstudio Version: 0.61.05-1 Severity: important Tags: patch When building 'synfigstudio' on amd64/unstable, I get the following error: dockbook.cpp:218: warning: comparison is always false due to limited range of data type if x86_64-linux-gnu-g++ -DHAVE_CONFIG_H -I../.. -I../.. -I../../src -I/usr/include/synfig-0.0 -I/usr/include/OpenEXR -I/usr/include/libxml++-2.6 -I/usr/lib/libxml++-2.6/include -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include/libxml2 -I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -pthread -I/usr/include/gtkmm-2.4 -I/usr/lib/gtkmm-2.4/include -I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include -I/usr/include/gdkmm-2.4 -I/usr/lib/gdkmm-2.4/include -I/usr/include/pangomm-1.4 -I/usr/include/atkmm-1.6 -I/usr/include/gtk-2.0 -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/atk-1.0 -DNDEBUG -g -O2 -ffast-math -W -Wall -Wno-unused-parameter -MT synfigstudio-dockdialog.o -MD -MP -MF .deps/synfigstudio-dockdialog.Tpo -c -o synfigstudio-dockdialog.o `test -f 'dockdialog.cpp' || echo './'`dockdialog.cpp; \ then mv -f .deps/synfigstudio-dockdialog.Tpo .deps/synfigstudio-dockdialog.Po; else rm -f .deps/synfigstudio-dockdialog.Tpo; exit 1; fi dockdialog.cpp: In constructor 'studio::DockDialog::DockDialog()': dockdialog.cpp:90: error: cast from 'studio::DockDialog*' to 'int' loses precision dockdialog.cpp: In member function 'void studio::DockDialog::set_contents(const synfig::String)': dockdialog.cpp:486: warning: comparison is always true due to limited range of data type dockdialog.cpp:486: warning: comparison is always true due to limited range of data type dockdialog.cpp:488: warning: comparison is always false due to limited range of data type dockdialog.cpp:488: warning: comparison is always true due to limited range of data type dockdialog.cpp:499: warning: comparison is always false due to limited range of data type make[4]: *** [synfigstudio-dockdialog.o] Error 1 make[4]: Leaving directory `/synfigstudio-0.61.05/src/gtkmm' With the attached patch 'synfigstudio' can be compiled on amd64. Regards Andreas Jochens diff -urN ../tmp-orig/synfigstudio-0.61.05/src/gtkmm/dockdialog.cpp ./src/gtkmm/dockdialog.cpp --- ../tmp-orig/synfigstudio-0.61.05/src/gtkmm/dockdialog.cpp 2006-01-30 03:29:02.0 + +++ ./src/gtkmm/dockdialog.cpp 2006-04-23 08:17:22.0 + @@ -87,7 +87,7 @@ widget_comp_select=new Widget_CompSelect(); // Give ourselves an ID that is most likely unique - set_id(synfig::UniqueID().get_uid()^reinterpret_castint(this)); + set_id(synfig::UniqueID().get_uid()^reinterpret_castlong(this)); set_role(strprintf(dock_dialog_%d,get_id())); GRAB_HINT_DATA( diff -urN ../tmp-orig/synfigstudio-0.61.05/src/gtkmm/keyframetreestore.cpp ./src/gtkmm/keyframetreestore.cpp --- ../tmp-orig/synfigstudio-0.61.05/src/gtkmm/keyframetreestore.cpp 2005-11-06 04:51:58.0 + +++ ./src/gtkmm/keyframetreestore.cpp 2006-04-23 08:23:59.0 + @@ -223,7 +223,7 @@ void KeyframeTreeStore::reset_stamp() { - stamp_=time(0)+reinterpret_castint(this); + stamp_=time(0)+reinterpret_castlong(this); } /* -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364409: Partitioning failure during install of Sarge 3.1r2
Package: install Version: Sarge 3.1r2 Using 3.1r2 (and 3.1r1), when install is writing changes to the partition tables using ext3 the partitioning utility either locks the system up altogether or spontaneously reboots it. System: ECS P4M800PRO-M v1.0 motherboard 1024MB Mushkin PC2700 memory Nvidia GeForce 2 video card 2 WD800 80GB hard drives The install proceeds normally until it gets to the partitioning, and the partitioning utility works properly until told to write the changes to the drives. Any help you could render would be very welcome. Thanks, Scotland O. Clark -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364410: backup-manager: duplicate archives are not purged
Package: backup-manager Version: 0.7.2-1 Severity: normal To work around bug #363663, I put a line with export GZIP=-9n into backup-manager's cron script. However, duplicate files are still not replaced by symlinks: # ls -l /var/archives/debian-root.2006042[12]* -rw-r- 1 root adm 7014 2006-04-21 17:14 /var/archives/debian-root.20060421.tar.gz -rw-r- 1 root adm 7014 2006-04-22 09:02 /var/archives/debian-root.20060422.tar.gz # LANG=C diff -s /var/archives/debian-root.2006042[12]* Files /var/archives/debian-root.20060421.tar.gz and /var/archives/debian-root.20060422.tar.gz are identical # grep BM_ARCHIVE_PURGEDUPS /etc/backup-manager.conf export BM_ARCHIVE_PURGEDUPS=true -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16.9 Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Versions of packages backup-manager depends on: ii debconf [debconf-2.0] 1.4.72 Debian configuration management sy ii gzip 1.3.5-13 The GNU compression utility ii ucf 2.009 Update Configuration File: preserv backup-manager recommends no packages. -- debconf information: backup-manager/upload-key: * backup-manager/name-format: long * backup-manager/burning-device: /dev/cdrw backup-manager/upload-hosts: backup-manager/upload-dir: /var/archives/uploads backup-manager/upload-user-ftp: * backup-manager/cron_frequency: daily * backup-manager/directories: /etc /home/sven /root * backup-manager/cron_d_remove_deprecated: true * backup-manager/blacklist: /home/sven/tmp * backup-manager/repo_group: adm * backup-manager/filetype: tar.gz * backup-manager/time-to-live: 10 * backup-manager/burning-maxsize: 650 * backup-manager/repo_user: root * backup-manager/backup-repository: /var/archives * backup-manager/burning-method: CDR backup-manager/upload-user-scp-warning: backup-manager/transfert_mode: scp * backup-manager/burning-enabled: true * backup-manager/dump_symlinks: false backup-manager/upload-user-scp: bmngr * backup-manager/cron_remove_deprecated: false * backup-manager/want_to_upload: false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#363445: Severity of #363445 is serious
severity 363445 serious thanks The missing dependencies are arguably a severe policy violation. Moreover, this version of libgtk2.0-dev would be totally broken in testing if it were allowed to go in now. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364333: openoffice.org-writer: [l10n:de] Menu option Tabelle has no shortcut
Hello Rene, thanks for the swift reply. On Sat, Apr 22, 2006 at 11:57:10PM +0200, Rene Engelhard wrote: Helge Kreutzmann wrote: This possibility does not exist for Tabelle, i.e., no charachter is underlined. This might be intentional (than this bug would become a wishlist bug) or, as I expect, is an (minor) glitch during translation (which I, as a translator myself) assume. Fixed upstream for OOo 2.0.3. Ok, then I simply wait for it to enter Debian Testing. Please reassing to the appropriate package (translation pack). If you want me to have a look at the po-file (or whatever is used for translation), please tell me. There's nothing like that in OOo. Everything is in the localize.sdfs. Where I don't know where that menu entry is defined on, really, anyway atm... Ok, I have no experience with those and it is fixed anyway. Greetings Helge -- Dr. Helge Kreutzmann [EMAIL PROTECTED] Dipl.-Phys. http://www.helgefjell.de/debian.php 64bit GNU powered gpg signed mail preferred Help keep free software libre: http://www.ffii.de/ signature.asc Description: Digital signature
Bug#345738: eric bug reports
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, all these bugs are limitations of Scintilla, the source code editor widget eric uses. I'll report them upstream, but there's nothing eric can do about this. Therefore, I am going to close these bug reports later. best, Torsten - -- Torsten Marek [EMAIL PROTECTED] ID: A244C858 -- FP: 1902 0002 5DFC 856B F146 894C 7CC5 451E A244 C858 Keyserver: subkeys.pgp.net -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.3 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFES0u/fMVFHqJEyFgRAhJoAKCnw4E3CZQB2L8g2LtreLOw34fw4QCeN8FR 6wLsg7WpKXTTAVWNl3A10T8= =OAVY -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364319: base-files: PS1 setting for *ksh
Please note that policy says: A program must not depend on environment variables to get reasonable defaults. The way I read this, whatever good defaults you think should be in /etc/profile, should be instead coded in the shells themselves as a default when no PS1 is set at all. Please think about a way to follow policy which does not involve making /etc/profile larger and larger. That's the wrong way. The right fix for this bug might involve removing lines from the current /etc/profile, and that's the only reason why I'm going to keep it open. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#345734: eric: Setting font for multiple highlighting styles in one step
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, your wish has been sent to upstream. best, Torsten - -- Torsten Marek [EMAIL PROTECTED] ID: A244C858 -- FP: 1902 0002 5DFC 856B F146 894C 7CC5 451E A244 C858 Keyserver: subkeys.pgp.net -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.3 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFES0yHfMVFHqJEyFgRAt8RAJ9bEXT/Fa394J+kROtCPeZ9bsm40gCfQrQj smBSQZzOz1GjDGvtoMsEpEc= =xVzb -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364411: apt-file: doesn't honor --architecture option
Package: apt-file Version: 2.0.8 Severity: normal Tags: patch Apt-file does not honor the --architecture option, both while updating and querying the database. Here's a patch for the problem. *** /root/apt-file-arch-option.patch --- apt-file2006-04-23 11:21:03.0 +0200 +++ apt-file.mod2006-04-23 11:29:49.0 +0200 @@ -325,7 +325,7 @@ my %options = ( sources-list|s=s = \$Conf-{sources_list}, cache|c=s = \$Conf-{cache}, - architecture|a=s = \$Conf-{architecture}, + architecture|a=s = \$Conf-{arch}, cdrom-mount|d=s = \$Conf-{cdrom_mount}, verbose|v = \$Conf-{verbose}, ignore-case|i = \$Conf-{ignore_case}, -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16 Locale: LANG=C, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Versions of packages apt-file depends on: ii gzip 1.3.5-13 The GNU compression utility ii libapt-pkg-perl 0.1.18 Perl interface to libapt-pkg ii libconfigfile-perl1.2.1 Parses simple configuration files ii perl 5.8.8-4Larry Wall's Practical Extraction ii wget 1.10.2-1 retrieves files from the web apt-file recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364332: [Buildd-tools-devel] Bug#364332: exec script 10mount fails if /dev/shm missing
Steve M. Robbins [EMAIL PROTECTED] writes: I was perusing the docs on setup scripts and looking at /etc/schroot/setup.d/10mount. It looks like this will do the mounting of /proc and /home for me so I no longer need to keep it in /etc/fstab. Cool! So I set up my woody chroot with run-setup-scripts=true to try. [woody] description=Debian Woody type=plain location=/chroot/woody groups=steve run-exec-scripts=true run-setup-scripts=true However, as you see below, /chroot/woody/dev/shm did not exist and the schroot command failed. I created an empty /chroot/woody/dev/shm and then it worked. Perhaps the script 10mount could ensure that mount directories exist? No problem. I'll add this to the next release. Regards, Roger -- Roger Leigh Printing on GNU/Linux? http://gutenprint.sourceforge.net/ Debian GNU/Linuxhttp://www.debian.org/ GPG Public Key: 0x25BFB848. Please sign and encrypt your mail. pgpbBgLTaGXFa.pgp Description: PGP signature
Bug#345735: eric: Using the document and API files for auto-completion at the same time
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, Scintilla can only use one source for auto completion. Maybe it will be added for QScintilla 2. I'll close this bug later. Feel free to reassign it to QScintilla. best, Torsten - -- Torsten Marek [EMAIL PROTECTED] ID: A244C858 -- FP: 1902 0002 5DFC 856B F146 894C 7CC5 451E A244 C858 Keyserver: subkeys.pgp.net -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.3 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFES02OfMVFHqJEyFgRAhQsAKCZSVTf9Xcp2cGWAUdFVLKMClHtdQCgxC7H AdtGjpGVAwVcvgK/0iFF100= =EYT6 -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364335: Fwd: Re: Bug#364335: xlibs: Full keyboard support requires a newer kernel
Hello Michel, This sounds like usual symptoms of XKB not being enabled, which can be caused by a lot of things. Thats why I installed the (new) packages libxkbfile1, libxkbui1. Sorry, not install, but »upgrade«, so the error is only a missing versioning. (I tend not to upgrade all the libfiles*, unless they are dragged in by a regular programm). But Etch users should be fine, as they would run a dist-upgrade. Greetings Helge -- Dr. Helge Kreutzmann [EMAIL PROTECTED] Dipl.-Phys. http://www.helgefjell.de/debian.php 64bit GNU powered gpg signed mail preferred Help keep free software libre: http://www.ffii.de/ signature.asc Description: Digital signature
Bug#361785: hal: Breaks autofs expiry
Roland Mas, 2006-04-10 11:48:06 +0200 : [...] seconds of non-usage. Unfortunately, it seems hal catches this unmount event and does stuff with it, which I wouldn't argue against, except it tries to access /mnt/auto/removable/usb-key/.created-by-hal. When I think about it, I end up concluding that this file (or directory or whatever it is) doesn't belong there. Even if I wanted to let HAL mount and unmount stuff, there's no guarantee that the filesystem containing the mountpoints is writable. Such state information should therefore be stored somewhere else, like /var/run, which seems more appropriate and should fix both problems. Roland. -- Roland Mas ()Campagne du ruban ASCII : /\Contre les mails en HTML et les vcard ! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364412: g++-4.0: problem with #pragma interface and templates turning back?
Package: g++-4.0 Version: 4.0.3-1 Severity: important I am feeling exactly the same problems as the ones reported in the gcc bugzilla bug report 21280. That is using #pragma interface and templates gives inline function used but never defined warnings and failure with missing symbols at link time. The gcc bugzilla report status is RESOLVED but, as far as it concerns to version 4.0.3-1, it seems not to be -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-486 Locale: LANG=pt_PT.UTF-8, LC_CTYPE=pt_PT.UTF-8 (charmap=UTF-8) Versions of packages g++-4.0 depends on: ii gcc-4.0 4.0.3-1The GNU C compiler ii gcc-4.0-base 4.0.3-1The GNU Compiler Collection (base ii libc6 2.3.6-3GNU C Library: Shared libraries an ii libstdc++6-4.0-dev4.0.3-1The GNU Standard C++ Library v3 (d g++-4.0 recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#363490: module sk98lin cannot be assigned to eth0
Am Samstag, 22. April 2006 02:07 schrieb Frans Pop: reassign 363490 linux-2.6 retitle 363490 [amd64] module sk98lin cannot be assigned to eth0 thanks On Wednesday 19 April 2006 14:49, Georg Colle wrote: Comments/Problems: The module sk98lin needed by the network HW was not loaded automatically. Choosing it from the list that showed after the automatic loading failure had no effect. Changing to the VT2, inserting ist manally by modprobe sk98lin and inspecting the list put out by lsmod showed that ist was loaded. But in /proc/net/sk98lin/ there was not the expected Document eth0 - there was nothing at all. I guess that the driver module could not be assigned correctly to the lan interface. I have no idea what this issue is about, but it looks like a kernel issue. I hope the kernel package maintainers can help you out. As I found out trying to install the i386 daily-build-image (loaded down on April 17 at 10:11pm), there is a working sk98lin module loading automatically. Perhaps it is worth while taking its source code and compiling it in an amd64 environment? Not really as amd64 and i386 kernels are compiled from the same source. Can you please provide the output of 'cat /proc/version/' after booting the installer and switching to VT2? If possible both for the i386 installation CD and the amd64 one. Here we go {1} cat /proc/version (i386; sk98lin working) Linux version 2.6.16-1-486 (Debian 2.6.16-4) ([EMAIL PROTECTED]) (gcc version 4.0.3 (Debian 4.0.3-1)) #1 Tue Mar 28 15:35:19 UTC 2006 {2} cat /proc/version (i386 after installation reboot; sk98lin no longer working) Linux version 2.6.15-1-686 (Debian 2.6.15-8) ([EMAIL PROTECTED]) (gcc version 4.0.3 20060212 (prerelease) (Debian 4.0.2-9)) #2 Mon Mar 6 15:27:08 UTC 2006 {3} cat /proc/version (amd64; sk98lin not working) Linux version 2.6.15-1-amd64-generic (Debian 2.6.15-7) ([EMAIL PROTECTED]) (gcc version 4.0.3 20060212 (prerelease) (Debian 4.0.2-9)) #2 Thu Feb 23 04:51:53 UTC 2006 Changing to kernel version 2.6.16 could do. Greetings Georg. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#345791: eric: New preferences for script starting and debugging
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, you can circumvent the dialog using Restart (F4). It will automatically use the last action (Debug or Run). I will close this bug later. Please feel free to reopen it if you are not satisfied. best, Torsten - -- Torsten Marek [EMAIL PROTECTED] ID: A244C858 -- FP: 1902 0002 5DFC 856B F146 894C 7CC5 451E A244 C858 Keyserver: subkeys.pgp.net -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.3 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFES00xfMVFHqJEyFgRAoFRAJ9+ez650j2vx5UdZhHzt9HnF8e86gCggtRQ 7OYvbJeV6dNUIVj7X3DjuSs= =7KLX -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364416: gnumeric: warning about ptgAttr
Package: gnumeric Version: 1.6.3-1 Severity: normal I get this: D Zip!T234 : Hmm, ptgAttr of type 0 ?? I've seen a case where an instance of this with flag A and another with flag 3 bracket a 1x1 array formula. please send us this file. Flags = 0x3 But I cannot send the file, because it contains confidential information. Should I try to reduce it to the minimum set that shows the error? -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages gnumeric depends on: ii debconf [debconf-2.0] 1.4.72 Debian configuration management sy ii gconf22.14.0-1 GNOME configuration database syste ii gnumeric-common 1.6.3-1common files for Gnumeric, the GNO ii gsfonts 8.14+v8.11+urw-0.2 Fonts for the Ghostscript interpre ii libart-2.0-2 2.3.17-1 Library of functions for 2D graphi ii libatk1.0-0 1.11.3-1 The ATK accessibility toolkit ii libbonobo2-0 2.14.0-1 Bonobo CORBA interfaces library ii libbonoboui2-02.10.1-2 The Bonobo UI library ii libc6 2.3.6-3GNU C Library: Shared libraries an ii libcairo2 1.0.2-3The Cairo 2D vector graphics libra ii libfontconfig12.3.2-1.1 generic font configuration library ii libgconf2-4 2.14.0-1 GNOME configuration database syste ii libglade2-0 1:2.5.1-2 library to load .glade files at ru ii libglib2.0-0 2.10.1-2 The GLib library of C routines ii libgnome-keyring0 0.4.9-1GNOME keyring services library ii libgnome2-0 2.12.0.1-5 The GNOME 2 library - runtime file ii libgnomecanvas2-0 2.14.0-1 A powerful object-oriented display ii libgnomeprint2.2-02.12.1-3 The GNOME 2.2 print architecture - ii libgnomeprintui2.2-0 2.12.1-2 GNOME 2.2 print architecture User ii libgnomeui-0 2.12.1-1 The GNOME 2 libraries (User Interf ii libgnomevfs2-02.14.0-2 GNOME virtual file-system (runtime ii libgoffice-1-20.2.1-1Document centric objects library - ii libgsf-1-114 1.14.0-1 Structured File Library - runtime ii libgsf-gnome-1-1141.14.0-1 Structured File Library - runtime ii libgtk2.0-0 2.8.16-1 The GTK+ graphical user interface ii libice6 6.9.0.dfsg.1-6 Inter-Client Exchange library ii liborbit2 1:2.14.0-1 libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.12.0-2 Layout and rendering of internatio ii libpopt0 1.7-5 lib for parsing cmdline parameters ii libsm66.9.0.dfsg.1-6 X Window System Session Management ii libx11-6 6.9.0.dfsg.1-6 X Window System protocol client li ii libxcursor1 1.1.3-1X cursor management library ii libxext6 6.9.0.dfsg.1-6 X Window System miscellaneous exte ii libxi66.9.0.dfsg.1-6 X Window System Input extension li ii libxinerama1 6.9.0.dfsg.1-6 X Window System multi-head display ii libxml2 2.6.23.dfsg.2-3GNOME XML library ii libxrandr26.9.0.dfsg.1-6 X Window System Resize, Rotate and ii libxrender1 1:0.9.0.2-1X Rendering Extension client libra ii zlib1g1:1.2.3-11 compression library - runtime gnumeric recommends no packages. -- debconf information: gnumeric/existing-process: false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364413: akregator: Akregator don't work with feeds in windows-1251 encoding
Package: akregator Version: 4:3.5.2-1+b1 Severity: normal Akregator don't recode feedds from windows-1251 encoding and these feeds are comletely unreadable in KOI8-R locale :-( By example: http://www.gazeta.ru/export/rss/sport.xml or http://www.hpc.ru/exp/hpcru_news.rss In both feeds uses (?xml version=1.0encoding=windows-1251?) -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686-smp Locale: LANG=ru_RU.KOI8-R, LC_CTYPE=ru_RU.KOI8-R (charmap=KOI8-R) Versions of packages akregator depends on: ii kdelibs4c2a 4:3.5.2-2+b1 core libraries for all KDE applica ii libc6 2.3.6-7 GNU C Library: Shared libraries ii libgcc1 1:4.1.0-1+b1 GCC support library ii libkdepim1a 4:3.5.2-1+b1 KDE PIM library ii libqt3-mt 3:3.3.6-1Qt GUI Library (Threaded runtime v ii libstdc++6 4.1.0-1+b1 The GNU Standard C++ Library v3 akregator recommends no packages. -- no debconf information -- Serge Matveev (home) - ICQ:3575357 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364414: Typo in package description
package: php-xml-serializer version: 0.18.0-1 severity: minor s/swiss-army knive/swiss-army knife/ Thomas -- Feel free - 10 GB Mailbox, 100 FreeSMS/Monat ... Jetzt GMX TopMail testen: http://www.gmx.net/de/go/topmail -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#361282: bug disappeared
The bug apparently solved by itself. All the packages on which wajig depends are the same version as when I reported the bug, but now it works... I think the bug can be closed. -- Francesco Potortì (ricercatore)Voice: +39 050 315 3058 (op.2111) ISTI - Area della ricerca CNR Fax: +39 050 313 8091 via G. Moruzzi 1, I-56124 Pisa Email: [EMAIL PROTECTED] Web: http://fly.isti.cnr.it/ Key: fly.isti.cnr.it/public.key
Bug#364415: gnome-btdownload: [INTL:sv] Swedish PO translation
Package: gnome-btdownload Severity: wishlist Tags: patch l10n Here is the Swedish translation of gnome-btdownload Daniel -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) # Swedish translation for gnome-btdownload # Copyright (c) (c) 2005 Canonical Ltd, and Rosetta Contributors 2005 # This file is distributed under the same license as the gnome-btdownload package. # FIRST AUTHOR [EMAIL PROTECTED], 2005. # msgid msgstr Project-Id-Version: gnome-btdownload\n Report-Msgid-Bugs-To: FULL NAME [EMAIL PROTECTED]\n POT-Creation-Date: 2005-05-30 21:33-0600\n PO-Revision-Date: 2005-12-14 19:47+0100\n Last-Translator: Daniel Nylander [EMAIL PROTECTED]\n Language-Team: Swedish [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n #: src/gnome-btdownload:158 msgid Couldn't locate file, will probably explode... msgstr Kunde inte hitta fil, kommer antagligen explodera... #: share/glade/contdiag.glade:217 msgid bA possible previous save location for this BitTorrent has been found:/b msgstr bEn tänkbar tidigare plats för sparade filer för denna BitTorrent har hittats:/b #: share/glade/contdiag.glade:259 msgid Continue to download to this location or save elsewhere? msgstr Fortsätt att ladda ner till denna plats eller spara någon annanstans? #: share/glade/dlsession.glade:8 msgid BitTorrent Session msgstr BitTorrent-session #: share/glade/dlsession.glade:55 msgid bFile:/b msgstr bFil:/b #: share/glade/dlsession.glade:83 #: share/glade/dlsession.glade:399 msgid bStatus:/b msgstr bStatus:/b #: share/glade/dlsession.glade:111 msgid bTime Elapsed:/b msgstr bFörbrukad tid:/b #: share/glade/dlsession.glade:139 msgid bTime Remaining:/b msgstr bÅterstående tid:/b #: share/glade/dlsession.glade:168 #: share/glade/dlsession.glade:196 #: share/glade/dlsession.glade:271 #: share/glade/dlsession.glade:299 #: share/glade/dlsession.glade:327 #: share/glade/dlsession.glade:578 msgid Unknown msgstr Okänd #: share/glade/dlsession.glade:242 msgid bAddress:/b msgstr bAdress:/b #: share/glade/dlsession.glade:360 msgid Download msgstr Ladda ner #: share/glade/dlsession.glade:429 msgid Cap Uploads: msgstr Stryp uppladdningar: #: share/glade/dlsession.glade:453 msgid Cap Upload Rate: msgstr Stryp uppladdningshastighet: #: share/glade/dlsession.glade:475 msgid Users msgstr Användare #: share/glade/dlsession.glade:503 msgid KB/s msgstr KB/s #: share/glade/dlsession.glade:618 msgid Upload msgstr Ladda upp #: share/glade/dlsession.glade:685 msgid Display Error Dialogs msgstr Visa feldialoger #: share/glade/dlsession.glade:743 msgid Events msgstr Händelser #: share/glade/dlsession.glade:838 msgid _Resume msgstr Åte_ruppta
Bug#360713: and RC bug
Let's please get this bug fixed? OK, informing upstream and getting them to fix it appropriately is nice, but that's not a reason for stop to keep failing meanwhile. Just say you're fine with it and I'll NMU, or prepare a fixed package and I'll be happy to sponsor it. Cheers, -- Guilherme de S. Pastore [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364254: fixing xscreensaver RC bug
Hi Ralf, do you care for some help with fixing this bug? I can either sponsor the upload of a package prepared by you to fix it or NMU it, as long as you approve it. Cheers, -- Guilherme de S. Pastore [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#359670: eric: Fatal Error when opening a project file that it has just saved
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, I was able to recreate the problem, it's already reported upstream. best, Torsten - -- Torsten Marek [EMAIL PROTECTED] ID: A244C858 -- FP: 1902 0002 5DFC 856B F146 894C 7CC5 451E A244 C858 Keyserver: subkeys.pgp.net -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.3 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFES1N4fMVFHqJEyFgRAk+rAJ94gwyGyHhZu/kMvHAtKXjNNb9+KQCghN0E rwVEtX2AntJBXG4u2gYO4V0= =BULw -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364391: cacti: cant create data templates or data sources
hi rene, On Sun, Apr 23, 2006 at 01:51:02PM +1000, Rene Cunningham wrote: Once a Data Source or Data Template is created, it is not shown within the lists in ManagmentData Sources or TemplatesData Templates. Newly created Data Sources are displayed within the Data Source pulldown menu located in ManagementGraph ManagementGraph Items though still arent displayed in ManagementData Sources list. strange. could you do me a favor and try the deb at http://people.debian.org/~seanius/cacti/sid/cacti_0.8.6h-2.1_all.deb and let me know if this version has the same problems with new datasources after you upgrade? thanks, sean signature.asc Description: Digital signature
Bug#350407: lessdisks-terminal: modifies /etc/kernel-img.conf in postinst
This one time, at band camp, Jonas Smedegaard said: On Sat, 22 Apr 2006 01:35:55 +0200 Bill Allombert wrote: On Sun, Jan 29, 2006 at 03:34:58PM +, Stephen Gran wrote: Package: lessdisks-terminal Severity: serious Justification: Policy 10.7.4 debian/lessdisks-terminal.postinst: if ! egrep postinst_hook|postrm_hook /etc/kernel-img.conf; then echo postinst_hook = /usr/sbin/update-lessdisks-kernels /etc/kernel-img.conf echo postrm_hook = /usr/sbin/update-lessdisks-kernels /etc/kernel-img.conf fi Note that debian/lessdisks-xterminal.postinst has a similar bug: debian/lessdisks-xterminal.postinst: echo $inittab_line /etc/inittab Hi Bill and Stephen, What exactly is the policy violation here? Policy 10.7.4 forbids packaging scripts to mess with conffiles of other packages. But /etc/kernel-img.conf and /etc/inittab is not conffiles. This is the section that is relevant: If it is desirable for two or more related packages to share a configuration file and for all of the related packages to be able to modify that configuration file, then the following should be done: One of the related packages (the owning package) will manage the configuration file with maintainer scripts as described in the previous section. The owning package should also provide a program that the other packages may use to modify the configuration file. The related packages must use the provided program to make any desired modifications to the configuration file. They should either depend on the core package to guarantee that the configuration modifier program is available or accept gracefully that they cannot modify the configuration file if it is not. (This is in addition to the fact that the configuration file may not even be present in the latter scenario.) Note that it talks about configuration files, not just dpkg conffiles. Your package directly modifies another package's configuration file, instead of using an interface to do so. The fact that there is, as afar as I know, no current interface, makes this trickier to solve on your own, I understand ;( Policy 10.7.4 also mandates shared configuration files to be owned by only one package. But it is not clear to me which single package that should be (that I should then file bugs against about an interface for messing with its configuration files). The packages sysvinit and a bunch of kernel packages seem to be kandidates, but looking at their packaging scripts they too seem to treat the configuration files as alien. Probably bugs against kernel-package (for kernel-img.conf) for an interface script is sufficient to get this part of the bug closed. I am not sure how to handle the inittab stuff, as IIRC there are several initscripts implementations floating around out there (but maybe only sysvinit handles inittab?) I just don't know the answer. -- - | ,''`.Stephen Gran | | : :' :[EMAIL PROTECTED] | | `. `'Debian user, admin, and developer | |`- http://www.debian.org | - signature.asc Description: Digital signature
Bug#360500: RM: tcltk8.0-ja -- ROQA; uninstallable, obsolete version of tcl/tk
Thank you for your help on packaging work. I admit that package tcltk8.0-ja is too old, and can be removed from Debian safely now. It was only for work-around until the normal tcltk package can handle Japanese text correctly, and now I have checked and make assured that the normal tcl8.4/tk8.4 package work enoughly. So, tcltk8.0-ja can be removed from Debian, and I request that action as the current maintainer. Sorry for late responding. It took some time to check the functionality of Japanese text handling about the current normal tcltk package. Thanks. -- Taketoshi Sano: [EMAIL PROTECTED],[EMAIL PROTECTED],[EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364419: python2.4: FTBFS: test_tcl hangs.
Package: python2.4 Version: 2.4.3-3 Severity: serious Hi, Your package failed to build on a few arches with the following error: test_tarfile test_tcl make: *** [stamp-check] Terminated Build killed with signal 15 after 150 minutes of inactivity Kurt -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364417: Silently creates non-pristine .orig.tar.gz files
Package: dh-make Version: 0.40 Severity: normal Tags: patch By default dh_make creates a new .orig directory when no .orig.tar.gz file is found. This leads to many packages with a non-pristine .orig.tar.gz file, but without any changes to the content. (Though of course a different md5sum). I suggest to only create a .orig directory if some option is supplied, like --createorig in the attached patch. Hochachtungsvoll, Bernhard R. Link diff -r -u dh-make-0.40.original/dh_make dh-make-0.40/dh_make --- dh-make-0.40.original/dh_make 2006-04-23 12:09:32.0 +0200 +++ dh-make-0.40/dh_make2006-04-23 12:42:43.0 +0200 @@ -29,6 +29,7 @@ our $fullname = ; our $source_file=; our $debian_native = 0; +our $copy_dir_for_orig = 0; our $package_type=; our $CHANGELOG=; our $PRESERVE=; @@ -104,6 +105,7 @@ -e, --email address use address as the maintainer e-mail address -n, --native the program is Debian native, don\'t generate .orig -f, --file file specify file to use as the original source archive + -r, --createorig make a copy for the original source archive -s, --single set package class to single -m, --multi set package class to multiple binary -l, --library set package class to library @@ -129,6 +131,7 @@ if (GetOptions('copyright|c=s' = \$main::license, 'email|e=s' = \$main::email, 'file|f=s' = \$main::source_file, + 'createorig|r' = \$main::copy_dir_for_orig, 'help|h' = \$dohelp, 'version|v' = \$doversion, 'native|n' = \$main::debian_native, @@ -416,15 +419,20 @@ exit 1; } } else { - if (-d ..$fullname.orig) + if (-d ../$fullname.orig) { print Skipping copying to $fullname.orig since $fullname.orig exists.\n; } else { if ( -f ../$fullname.orig.tar.gz) { print Skipping copying to $fullname.orig since $fullname.org.tar.gz exists.\n; - } else { + } elsif ($copy_dir_for_orig) { system('cp', '-a', ../$fullname, ../$fullname.orig); + } else { + print Could not find $package_name\_$version.orig.tar.gz\n; + print Either specify an alternate file to use with -f,\n; + print or add --createorig to create one.\n; + exit 1; } } } diff -r -u dh-make-0.40.original/dh_make.1 dh-make-0.40/dh_make.1 --- dh-make-0.40.original/dh_make.1 2006-04-23 12:09:32.0 +0200 +++ dh-make-0.40/dh_make.1 2006-04-23 12:36:28.0 +0200 @@ -47,12 +47,18 @@ The package will be build using the Common Debian Build System. CDBS provides a sane set of default rules upon which packages can build. .SH ACTIONS PERFORMED +Unless \-\-native was given, .B dh_make -copies the archive on the higher directory level into -packagename-version.orig if that directory does not exist. If the -f -option is supplied, the specified file name is taken as the source archive. +makes sure a original source archive (packagename\-version.orig.tar.gz) +exists. +If no such file exists, the file specified with \-f is copied in place. +If no \-f is supplied either but \-\-createorig is, the current directory +it copied into packagename\-version.orig which will be made to this +archive by dpkg\-source later automatically. The original archive is needed for other Debian tools to generate the diffs to the original sources required by the Debian packaging format. +Unless there are reasons against it this file should be the pristine +upstream archive. .PP Then .B dh_make
Bug#363644: Same problem here
Hello, currently I'm experiencing the same problem here. Yesterday I decided to give etch a try and installed it. After trying to generate another locale, I get same errors, when trying to generate or reinstall locales. After trying to purge and reinstall the package, the package is not installed. I deleted /etc/enviroment, installed locales with no locale set, and everythings works fine here. However, there might be some upgrade issues, that may make upgrading to sarge difficult for users... Keep smiling yanosz -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364418: gdebi: [INTL:sv] Swedish debconf templates translation
Package: gdebi Severity: wishlist Tags: patch l10n Here is the updated Swedish translation of gdebi Regards Daniel -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) # SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR [EMAIL PROTECTED], YEAR. # msgid msgstr Project-Id-Version: gdebi 0.1.4\n Report-Msgid-Bugs-To: [EMAIL PROTECTED] POT-Creation-Date: 2006-04-11 21:08+\n PO-Revision-Date: 2006-04-23 12:50+0100\n Last-Translator: Daniel Nylander [EMAIL PROTECTED]\n Language-Team: Swedish [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=utf-8\n Content-Transfer-Encoding: 8bit\n #: ../gdebi:20 #, c-format msgid Usage: %s [package.deb] msgstr Användning: %s [paket.deb] #: ../gdebi:22 msgid To use the graphical user interface, right-click\n on a '.deb' software package in the file browser\n and select: Open with 'GDebi Package Installer'. msgstr För att använda det grafiska användargränssnittet,\n högerklicka på ett \.deb\-paket i filbläddraren och\n välj: Öppna med \Paketinstallatören GDebi\. #: ../gdebi:27 #, c-format msgid gdebi error, file not found: %s msgstr gdebi-fel, filen hittades inte: %s #: ../gdebi:33 #: ../GDebi/GDebiCli.py:70 msgid Do you want to install the software package? [y/N]: msgstr Vill du installera programvarupaketet? [j/N]: #: ../gdebi-gtk:27 msgid Run non-interactive (dangerous!) msgstr Kör icke-interaktivt (farligt!) #: ../data/gdebi.glade.h:1 msgid msgstr #: ../data/gdebi.glade.h:2 msgid (c) 2005-2006 Canonical msgstr © 2005-2006 Canonical #: ../data/gdebi.glade.h:3 msgid bbig /big/b msgstr bbig /big/b #: ../data/gdebi.glade.h:4 msgid bMaintainer:/b msgstr bUnderhållare:/b #: ../data/gdebi.glade.h:5 msgid bPriority:/b msgstr bPrioritet:/b #: ../data/gdebi.glade.h:6 msgid bSection:/b msgstr bSektion:/b #: ../data/gdebi.glade.h:7 msgid bSize:/b msgstr bStorlek:/b #: ../data/gdebi.glade.h:8 msgid bTo install the following changes are required:/b msgstr bFör att installera krävs följande ändringar:/b #: ../data/gdebi.glade.h:9 msgid bVersion:/b msgstr bVersion:/b #: ../data/gdebi.glade.h:10 msgid bigbYou need to grant adminstrative rights to install software/b/big\n \n It is a possible security risk to install packages files manually. Install software from trustworthy software distributors only. msgstr bigbDu behöver tillåta användningen av administrativa rättigheter för att installera programvara/b/big\n \n Det är en möjlig säkerhetsrisk att manuellt installera paketfiler. Installera endast programvara från pålitliga programvarudistributörer. #: ../data/gdebi.glade.h:13 msgid Description msgstr Beskrivning #: ../data/gdebi.glade.h:14 msgid Description: msgstr Beskrivning: #: ../data/gdebi.glade.h:15 msgid Details msgstr Detaljer #: ../data/gdebi.glade.h:16 msgid GPL, see /usr/share/common-licenses/GPL msgstr GPL, se /usr/share/common-licenses/GPL #: ../data/gdebi.glade.h:17 msgid Included Files msgstr Inkluderade filer #: ../data/gdebi.glade.h:18 msgid Install and view software packages msgstr Installera och visa programvarupaket #: ../data/gdebi.glade.h:19 msgid Package Installer msgstr Paketinstallatör #: ../data/gdebi.glade.h:20 msgid Package: msgstr Paket: #: ../data/gdebi.glade.h:21 msgid Status: msgstr Status: #: ../data/gdebi.glade.h:22 msgid Terminal msgstr Terminal #: ../data/gdebi.glade.h:23 msgid _Details msgstr _Detaljer #: ../data/gdebi.glade.h:24 msgid _File msgstr _Arkiv #: ../data/gdebi.glade.h:25 msgid _Grant msgstr _Tillåt #: ../data/gdebi.glade.h:26 msgid _Help msgstr _Hjälp #: ../data/gdebi.glade.h:27 #: ../GDebi/GDebi.py:199 #: ../GDebi/GDebi.py:267 msgid _Install Package msgstr _Installera paket #: ../data/gdebi.glade.h:28 msgid gdebi msgstr gdebi #. TRANSLATORS: Replace this string with your names, one name per line. #: ../data/gdebi.glade.h:30 msgid translator-credits msgstr Daniel Nylander [EMAIL PROTECTED] #: ../data/gdebi.xml.in.h:1 msgid Software package msgstr Programvarupaket #: ../GDebi/GDebi.py:51 msgid Loading... msgstr Läser in... #: ../GDebi/GDebi.py:121 #, python-format msgid Could not open '%s' msgstr Kunde inte öppna \%s\ #: ../GDebi/GDebi.py:122 #: ../GDebi/GDebiCli.py:20 msgid The package might be corrupted or you are not allowed to open the file. Check the permissions of the file. msgstr Paketet kan vara skadat eller så tillåts du inte att öppna filen. Kontrollera rättigheterna på filen. #. set window title #: ../GDebi/GDebi.py:135 #, python-format msgid Package Installer - %s msgstr Paketinstallatör - %s #: ../GDebi/GDebi.py:206 msgid Same version is already installed msgstr Samma version är redan installerad #: ../GDebi/GDebi.py:207
Bug#364391: cacti: cant create data templates or data sources
On Sun, Apr 23, 2006 at 06:55:53AM -0400, sean finney wrote: hi rene, Hi! On Sun, Apr 23, 2006 at 01:51:02PM +1000, Rene Cunningham wrote: Once a Data Source or Data Template is created, it is not shown within the lists in ManagmentData Sources or TemplatesData Templates. Newly created Data Sources are displayed within the Data Source pulldown menu located in ManagementGraph ManagementGraph Items though still arent displayed in ManagementData Sources list. strange. could you do me a favor and try the deb at http://people.debian.org/~seanius/cacti/sid/cacti_0.8.6h-2.1_all.deb and let me know if this version has the same problems with new datasources after you upgrade? Looking very good so far. My data source which contains multiple DS's is sticking and showing in the lists. Ill create some graphs and some data templates and keep you updated. What was broken in 0.8.6h-2? -- Rene -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364419: python2.4: FTBFS: test_tcl hangs.
Kurt Roeckx writes: Package: python2.4 Version: 2.4.3-3 Severity: serious Hi, Your package failed to build on a few arches with the following error: test_tarfile test_tcl make: *** [stamp-check] Terminated Build killed with signal 15 after 150 minutes of inactivity no, that looks like a buildd problem. See http://lists.debian.org/debian-python/2006/04/msg00118.html I don't know of any documentation how the buildds are configured. Any hints are welcome. unfortunately we don't have a pseudo package for buildd problems. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#251343: Reason for this bug?
Hello, what is the reason this bug is still open? Greetings Helge -- Dr. Helge Kreutzmann [EMAIL PROTECTED] Dipl.-Phys. http://www.helgefjell.de/debian.php 64bit GNU powered gpg signed mail preferred Help keep free software libre: http://www.ffii.de/ signature.asc Description: Digital signature
Bug#361004: carpaltunnel NMU'd
tag 361004 pending kthxbye Hi, as we are currently in Bug-Squashing Party period (see debian-devel-announce), and your package contained an RC bug unanswered to, it has been NMUd. The package has been uploaded to tfheen's delayed queue, though, and you have until approximately an hour before today's dinstall to react and remove it from there if you're not ok with it. And thank Paul Wise for the patch =) Cheers, -- Guilherme de S. Pastore [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364254: fixing xscreensaver RC bug
* Guilherme de S. Pastore [EMAIL PROTECTED]: Hi Ralf, do you care for some help with fixing this bug? I can either sponsor the upload of a package prepared by you to fix it or NMU it, as long as you approve it. That's no problem, I'll fix that today. But I really wonder how the package was autobuilt on vbuilder then... -- Ralf Hildebrandt (i.A. des IT-Zentrums) [EMAIL PROTECTED] Charite - Universitätsmedizin BerlinTel. +49 (0)30-450 570-155 Gemeinsame Einrichtung von FU- und HU-BerlinFax. +49 (0)30-450 570-962 IT-Zentrum Standort CBF send no mail to [EMAIL PROTECTED]
Bug#364420: cannot find latex if current path contains spaces
Package: rubber Version: 1.1-1 Severity: normal If the .tex file to be compiled is located in a directory that contains one or more spaces e.g. /home/user/directory with spaces/test.tex then rubber is not able to find the compiler: [EMAIL PROTECTED]:/home/user/directory with spaces$ rubber test compiling test.tex... Could not run latex. The previous version of rubber did not have this problem. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/dash Kernel: Linux 2.6.15-1-k7 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages rubber depends on: ii python2.3.5-5An interactive high-level object-o ii tetex-bin 3.0-16 The teTeX binary files rubber recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#360939: All fixed
Am Sonntag, den 23.04.2006, 10:46 +0200 schrieb Mike Hommey: Version: 2.14.1-1 All these bugs are the incarnation of the same one, and seems to me to have been fixed in 2.14.1. Feel free to reopen the bug if you still see it with this version. It was already reopened and I can verify too, that the problem still exists in 2.14.1. Regards, Daniel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#340651: Dies with sigseg
forwarded 340651 http://gcc.gnu.org/PR27268 tags 340651 + upstream retitle 340651 [PR java/27268] Dies with sigseg thanks hint: the blackdown runtime is more verbose: Exception in thread main java.lang.StackOverflowError at test.init(test.java) at test.init(test.java:5) at test.init(test.java:5) at test.init(test.java:5) at test.init(test.java:5) [...] adn then loops forever -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#360843: who should?
paul cannon wrote: It seems rather like manpages-dev /should/ be the one to own these, and a bug should be filed on modutils to get these manpages out of there. In a former time it was the job of manpages/manpages-dev to document the interface to the kernel and libc, i.e. system calls etc. That way, the bug is in modutils indeed and not in manpages-dev. These are system calls from the kernel that should be documented by the manpages-dev package and not by an arbitrary package. Regards, Joey -- Everybody talks about it, but nobody does anything about it! -- Mark Twain Please always Cc to me when replying to me on the lists. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364421: hibernate: Please disable hibernation after kernel updates
Package: hibernate Version: 1.12-1 Severity: normal Using the following software sometimes results in failed resumes: - Linux kernel from Debian unstable - Linux kernel software suspend code (not suspend2): UseSysfsPowerState disk - hibernate script How this happens: 1. Boot/resume the system. 2. Run apt-get upgrade which installs a new kernel package. 3. Run hibernate to suspend system as usually. 4. Resume now fails because of the new kernel. A few ideas for fixing the problem: a) When hibernate is run to suspend the system, check that the exact version of currently running kernel will be available on the next boot. If it will not be available, do not suspend. b) This could be achieved by a script run on system boots (but not resumes) which records the exact version of the kernel running, making a connection to the Debian package behind it. The hibernate script could then check the currently installed kernel package against the package on startup. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing'), (500, 'stable'), (250, 'unstable'), (100, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-686 Locale: LANG=C, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) hibernate depends on no packages. Versions of packages hibernate recommends: pn console-tools none (no description available) ii hdparm6.3-3 tune hard disk parameters for high ii vlock 1.3-9 Virtual Console locking program -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#335274: matanza: 335274: new packaging
tags 335274 + patch usertags 335274 + sentpatch thanks I've attached some new packaging that is a vast improvement over the old packaging. -- bye, pabs http://wiki.debian.org/PaulWise matanza_0.13-3.2.diff.gz Description: GNU Zip compressed data signature.asc Description: This is a digitally signed message part
Bug#364427: [INTL:nl] New dutch po-debconf translation
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Package: netselect Version: 0.3.ds1-6 Severity: wishlist Tags: patch l10n Please find attached the dutch po-debconf translation. This translation has been vetted by the review process of the debian-l10n-dutch team. Please add it to your next package revision, it should be inserted in your package build-tree as debian/po/nl.po, TIA. Feel free to mail me if this file needs updating at some future date. - - -- Cheers, Kurt -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFES2j4+9wz99/liY0RAkkoAKC0pIW1eo2/5YqBzsR+73ByaHdgKQCg65A1 Q3/AhIjKlpPbQ/fzHeN+N1Y= =zPuY -END PGP SIGNATURE- # Translation of netselect_0.3.ds1-6_templates.po to Dutch # # This file is distributed under the same license as the netselect package. # Please see debian/copyright. # #Translators, if you are not familiar with the PO format, gettext #documentation is worth reading, especially sections dedicated to #this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' #Some information specific to po-debconf are available at #/usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans# #Developers do not need to manually edit POT or PO files. # msgid msgstr Project-Id-Version: netselect_0.3.ds1-6_nl\n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2004-02-18 11:21+0100\n PO-Revision-Date: 2006-04-21 14:37+0200\n Last-Translator: Kurt De Bree kdebree(AT)telenet(DOT)be\n Language-Team: Dutch debian-l10n-dutch@lists.debian.org\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n X-Generator: KBabel 1.10.2\n Plural-Forms: nplurals=2; plural=(n != 1);\n #. Type: boolean #. Description #: ../templates:4 msgid Do you want netselect to be installed setuid root? msgstr Wilt u netselect installeren met de 'set-user-id' bit als root? #. Type: boolean #. Description #: ../templates:4 msgid Netselect can be installed with the set-user-id bit set, so that it will run with the permissions of the 'root' user. Since netselect needs these permissions to work properly, ordinary users cannot run it unless it is installed this way. msgstr Netselect kan geïnstalleerd worden met de 'set-user-id' bit als root waardoor het als root wordt uitgevoerd (en dus met beheerdersrechten). Daar netselect deze rechten nodig heeft om correct te werken, kunnen gewone gebruikers deze niet gebruiken, tenzij het op deze wijze geïnstalleerd is #. Type: boolean #. Description #: ../templates:4 msgid Enabling this feature may be a security risk, so it is disabled by default. If in doubt, I suggest you leave it disabled. msgstr Standaard is deze optie uitgeschakeld, aangezien dit een veiligheidsrisico kan zijn. Bij twijfel is het aangeraden deze optie uitgeschakeld te laten.
Bug#364423: [INTL:nl] New dutch po-debconf translation
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Package: lvm2 Version: 2.02.02-1 Severity: wishlist Tags: patch l10n Please find attached the dutch po-debconf translation. This translation has been vetted by the review process of the debian-l10n-dutch team. Please add it to your next package revision, it should be inserted in your package build-tree as debian/po/nl.po, TIA. Feel free to mail me if this file needs updating at some future date. - - -- Cheers, Kurt -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFES2gz+9wz99/liY0RAisMAKDh2nreRcJdgJ6fux2ya6dwiqG/dQCgqfN/ 4DqZFQpChifsDgo3PDmPNvI= =nFBV -END PGP SIGNATURE- # Translation of lvm2_2.02.02-1_templates.po to Dutch # This file is distributed under the same license as the lvm2 package. # Please see debian/copyright. # #Translators, if you are not familiar with the PO format, gettext #documentation is worth reading, especially sections dedicated to #this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' #Some information specific to po-debconf are available at #/usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans# #Developers do not need to manually edit POT or PO files. # msgid msgstr Project-Id-Version: lvm2_2.02.02-1_nl\n Report-Msgid-Bugs-To: [EMAIL PROTECTED] POT-Creation-Date: 2006-02-12 12:56+0100\n PO-Revision-Date: 2006-04-21 14:37+0200\n Last-Translator: Kurt De Bree kdebree(AT)telenet(DOT)be\n Language-Team: Dutch debian-l10n-dutch@lists.debian.org\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n X-Generator: KBabel 1.10.2\n Plural-Forms: nplurals=2; plural=(n != 1);\n #. Type: note #. Description #: ../lvm2.templates:3 msgid Snapshot format changes msgstr Formaatwijziging voor momentopnamen (snapshot) #. Type: note #. Description #: ../lvm2.templates:3 msgid The internal format of snapshots has changed between LVM1 and LVM2. Any snapshots you have in LVM1 will be not be available to LVM2. msgstr Het interne formaat voor momentopnamen (snapshot) is veranderd voor LVM2 (en is dus anders dan voor LVM1). Hierdoor zullen LVM1-momentopnamen niet beschikbaar zijn met LVM2. #. Type: note #. Description #: ../lvm2.templates:3 msgid The installation procedure has detected that you have LVM1 snapshots on your system. Before you complete the upgrade to LVM2 it is recommended that you remove these snapshots and save their data if necessary. msgstr Het installatieproces heeft de aanwezigheid van LVM1-momentopnamen op uw systeem gedetecteerd. Vooraleer de opwaardering te voltooien is het aangeraden deze momentopnamen te verwijderen en indien nodig hun gegevens te bewaren. #. Type: note #. Description #: ../lvm2.templates:3 msgid All other LVM data will be preserved in the upgrade. msgstr Tijdens de opwaardering zullen alle andere LVM-gegevens behouden blijven. #. Type: note #. Description #: ../lvm2.templates:15 msgid Running kernel TOO old msgstr Huidige kernel is te oud #. Type: note #. Description #: ../lvm2.templates:15 msgid Your running kernel is 2.6.12. lvm2 since 2.02.00 does not work with them. msgstr Uw huidige kernel-versie is ouder dan de versie 2.6.12. Vanaf LVM2-versie 2.02.00 worden deze oudere kernels niet meer ondersteund.
Bug#364424: gnome-cd: segfaults on play
Package: gnome-media Version: 2.12.0-4 Severity: important -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Start GNOME-CD = GNOME-CD Starts and shows CDDB/CD-TEXT info. Hit play button = Segfault - -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.9-9-amd64-k8 Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) (ignored: LC_ALL set to en_US.utf8) Versions of packages gnome-media depends on: ii gnome-media-common 2.12.0-4GNOME media utilities - common fil ii gstreamer0.8-alsa [gstre 0.8.12-1ALSA plugin for GStreamer ii gstreamer0.8-artsd [gstr 0.8.12-1aRtsd plugin for GStreamer ii gstreamer0.8-cdparanoia 0.8.12-1cdparanoia plugin for GStreamer ii gstreamer0.8-esd [gstrea 0.8.12-1Enlightened Sound Daemon plugin fo ii gstreamer0.8-misc0.8.12-1Collection of various GStreamer pl ii gstreamer0.8-oss [gstrea 0.8.12-1OSS plugin for GStreamer ii libart-2.0-2 2.3.17-1Library of functions for 2D graphi ii libatk1.0-0 1.11.4-1The ATK accessibility toolkit ii libaudiofile00.2.6-6 Open-source version of SGI's audio ii libavahi-client3 0.6.9-8 Avahi client library ii libavahi-common3 0.6.9-8 Avahi common library ii libavahi-compat-howl00.6.9-8 Avahi Howl compatibility library ii libbonobo2-0 2.14.0-1Bonobo CORBA interfaces library ii libbonoboui2-0 2.14.0-2The Bonobo UI library ii libc62.3.6-6 GNU C Library: Shared libraries ii libcairo21.0.4-1 The Cairo 2D vector graphics libra ii libdbus-1-2 0.61-5 simple interprocess messaging syst ii libesd0 0.2.36-3Enlightened Sound Daemon - Shared ii libfontconfig1 2.3.2-5.1 generic font configuration library ii libfreetype6 2.1.10-3FreeType 2 font engine, shared lib ii libgail-common 1.8.11-1GNOME Accessibility Implementation ii libgail171.8.11-1GNOME Accessibility Implementation ii libgconf2-4 2.14.0-1GNOME configuration database syste ii libgcrypt11 1.2.2-1 LGPL Crypto library - runtime libr ii libglade2-0 1:2.5.1-2 library to load .glade files at ru ii libglib2.0-0 2.10.2-1The GLib library of C routines ii libgnome-keyring00.4.9-1 GNOME keyring services library ii libgnome-media0 2.12.0-4runtime libraries for the GNOME me ii libgnome2-0 2.14.0-2The GNOME 2 library - runtime file ii libgnomecanvas2-02.14.0-2A powerful object-oriented display ii libgnomeui-0 2.14.0-1The GNOME 2 libraries (User Interf ii libgnomevfs2-0 2.14.0-3GNOME virtual file-system (runtime ii libgnutls12 1.2.9-2 the GNU TLS library - runtime libr ii libgpg-error01.2-1 library for common error values an ii libgstreamer-gconf0.8-0 0.8.12-1GConf support for GStreamer ii libgstreamer-plugins0.8- 0.8.12-1Various GStreamer libraries and li ii libgstreamer0.8-00.8.12-1Core GStreamer libraries, plugins, ii libgtk2.0-0 2.8.16-1The GTK+ graphical user interface ii libhal1 0.5.7-1 Hardware Abstraction Layer - share ii libice6 6.9.0.dfsg.1-6 Inter-Client Exchange library ii libjpeg626b-12 The Independent JPEG Group's JPEG ii libnautilus-burn22.12.3-1Nautilus Burn Library - runtime ve ii liborbit21:2.14.0-1 libraries for ORBit2 - a CORBA ORB ii libpango1.0-01.12.1-1Layout and rendering of internatio ii libpng12-0 1.2.8rel-5.1PNG library - runtime ii libpopt0 1.7-5 lib for parsing cmdline parameters ii libsm6 6.9.0.dfsg.1-6 X Window System Session Management ii libtasn1-2 1:0.2.17-2 Manage ASN.1 structures (runtime) ii libx11-6 6.9.0.dfsg.1-6 X Window System protocol client li ii libxcursor1 1.1.3-1 X cursor management library ii libxext6 6.9.0.dfsg.1-6 X Window System miscellaneous exte ii libxi6 6.9.0.dfsg.1-6 X Window System Input extension li ii libxinerama1 6.9.0.dfsg.1-6 X Window System multi-head display ii libxml2 2.6.23.dfsg.2-3 GNOME XML library ii libxrandr2 6.9.0.dfsg.1-6 X Window System Resize, Rotate and ii libxrender1 1:0.9.0.2-1 X Rendering Extension client libra ii zlib1g
Bug#364422: libopenobex1-dev: pkg-config should provide correct include-path
Package: libopenobex1-dev Version: 1.2-2 Severity: normal Since we couldn't agree on this in private email I think we should try to get a more public discussion started. Thus this bug report. libopenobex1-dev stores its header files under /usr/include/openobex, but pkg-config --cflags-only-I openobex says nothing. Or in other words, /usr/lib/pkgconfig/openobex.pc defines includedir=${prefix}/include which obviously is not the place where the header files are. IMO this is not correct, but then I'm not really into pkg-config usage so I might be incorrect. Michael -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (100, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-686 Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Versions of packages libopenobex1-dev depends on: ii libbluetooth1-dev 2.25-1 Development files for using the Bl ii libopenobex1 1.2-2 OBEX protocol library ii libusb-dev2:0.1.12-2 userspace USB programming library ii pkg-config0.20-1 manage compile and link flags for libopenobex1-dev recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364426: xserver-xorg-video-ati: display completely garbled with DRI, can even hard lock
Package: xserver-xorg-video-ati Version: 1:6.5.7.3-3 Severity: important Hi, When commenting out the 'Load dri' line in the Module section of /etc/X11/xorg.conf, X works mostly fine. However, when uncommenting this line, I experience severe problems: - the display is completely garbled (and unstable: sort of flickering, etc.); the best I can do is recognize the color of the title bars of windows that tells me the window manager (wmaker) is running. - when typing the key sequence that should end my X session properly (by quitting wmaker), the whole system hard locks and I have to hit the reset button (I only tried this once!). Previously, just after my upgrade to X.org, my window manager was not started when running startx (because of a .Xauthority problem), and I could kill the X server properly with Ctrl-Alt-Backspace without triggering a hard lock. My kernel is compiled from kernel-source 2.4.27-10sarge2 (I am using a sid chroot). X was running fine with DRI enabled before I upgraded to X.org. lspci -v says for the video card: :03:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] (prog-if 00 [VGA]) Subsystem: C.P. Technology Co. Ltd: Unknown device 2072 Flags: bus master, stepping, 66MHz, medium devsel, latency 32, IRQ 11 Memory at d000 (32-bit, prefetchable) [size=128M] I/O ports at d000 [size=256] Memory at de00 (32-bit, non-prefetchable) [size=64K] Expansion ROM at unassigned [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Capabilities: [50] Power Management version 2 I am attaching the Xorg.0.log file for the DRI-enabled run that caused the hard lock I reported above. Thanks for any help regarding these problems. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/dash Kernel: Linux 2.4.27 Locale: LANG=en_US.ISO-8859-15, [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages xserver-xorg-video-ati depends on: ii libc6 2.3.6-7GNU C Library: Shared libraries ii xserver-xorg-core 1:1.0.2-5 X.Org X server -- core server xserver-xorg-video-ati recommends no packages. -- no debconf information _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/florent:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 X Window System Version 7.0.0 Release Date: 21 December 2005 X Protocol Version 11, Revision 0, Release 7.0 Build Operating System:Linux 2.6.12-1-686 i686 Current Operating System: Linux florent 2.4.27 #1 Fri Mar 24 10:25:27 CET 2006 i686 Build Date: 16 March 2006 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Sun Apr 23 13:16:38 2006 (==) Using config file: /etc/X11/xorg.conf (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor Eizo FlexScan L767 (**) | |--Device ATI Radeon RV100 QY [Radeon 7000/VE] (**) |--Input Device Generic Keyboard (**) |--Input Device Configured Mouse (WW) The directory /usr/share/fonts/X11/cyrillic does not exist. Entry deleted from font path. (**) FontPath set to /usr/share/fonts/X11/misc,/usr/share/fonts/X11/100dpi/:unscaled,/usr/share/fonts/X11/75dpi/:unscaled,/usr/share/fonts/X11/Type1,/usr/share/fonts/X11/100dpi,/usr/share/fonts/X11/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,/usr/share/fonts/X11/misc/,/usr/share/fonts/X11/TTF/,/usr/share/fonts/X11/OTF,/usr/share/fonts/X11/Type1/,/usr/share/fonts/X11/CID/,/usr/share/fonts/X11/100dpi/,/usr/share/fonts/X11/75dpi/ (==) RgbPath set to /usr/share/X11/rgb (==) ModulePath set to /usr/lib/xorg/modules (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.8 X.Org XInput driver : 0.5 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so (II) Module bitmap: vendor=X.Org Foundation compiled for 7.0.0, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/lib/xorg/modules/libpcidata.so (II) Module pcidata: vendor=X.Org Foundation compiled for 7.0.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.8 (--) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip
Bug#363998: squid: fails to start
Hi! I use it with the default debian sid configuration... same error... -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#359745: webalizer RC bug
Do you need someone to sponsor the upload? If you send me the package today, I can do it for you. Cheers, -- Guilherme de S. Pastore [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364428: making image bootable failed when building an etch based cd
Package: debian-cd Severity: important Hi During the setup for the Debian-Edu/Skolelinux cd i discovered that making the image bootable fails because I can't get release notes for etch :) Well I fear that it will take some time before we can get them ;) Maybe for now you can think about a kind of check or whatever just to make sure that the bootable-process won't stop when you can't get the release notes. Here is the line I was looking at: tools/etch/installtools.sh: wget $RELEASE_NOTES_LOCATION/release-notes-$ARCH.tar.gz Greetings Steffen -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#317058: libapt-pkg-perl: segfault in XS_AptPkg___pkg_records_DESTROY
found 317058 0.1.18 tags 317058 patch thanks On Sun, Nov 13, 2005 at 07:18:52PM +1100, Brendan O'Dea wrote: Unfortunately I've been unable to determine the cause as yet. It seems that this (a further abbreviation of your test case) fails: use overload ('' = sub { ${$_[0]} }); use AptPkg::Cache; my ($c, $p); sub apt_init { $c = AptPkg::Cache-new; $p = $c-packages; } apt_init; however commenting out either the use overload, or the sub apt_init and apt_init; lines removes the problem. Hi, the segfault doesn't manifest on current sid. Unfortunately that doesn't mean it's fixed, it's just hiding pretty well. The 'use overload' part is a red herring. On current sid with perl 5.8.7-10 from snapshot.debian.net, I'm able to reproduce the segfault with just use AptPkg::Cache; my $p; sub apt_init { $p = AptPkg::Cache-new-packages; } apt_init; The apt-build segfault (#315143) also reproduces for me with 5.8.7-10 but not 5.8.8-4. The problem AIUI is as follows: The pkgCacheFile::Packages() function in AptPkg.xs creates a new pkgRecords object, which contains a (private) pointer to the pkgCacheFile object itself. However, Perl doesn't know this, and the reference count of the pkgCacheFile object isn't increased. When the pkgRecords object is destroyed, its destructor (inside libapt-pkg) uses the pkgCacheFile pointer, and segfaults if the pkgCacheFile object has been destroyed earlier. The trouble in reproducing this is because both the pkgCacheFile and the pkgRecords object have the same reference count, so they are destroyed in an undefined order. A proposed fix is to increase the reference count of the pkgCacheFile object inside the Packages() method and decrease it when the pkgRecords object is destroyed. The attached patch tries to do this. I have changed the internal type of AptPkg::_pkg_records so the pointer to the pkgCacheFile object can be found at destroy time. I hope this makes sense. I'm not experienced at all with XS programming or perlguts and have been learning while I go along, so the patch is probably not in 'good style'. It seems to work, though. For the record, using 'debugperl -DDo' was useful for me in investigating the problem. Cheers, - Niko Tyni [EMAIL PROTECTED] --- libapt-pkg-perl-0.1.18/AptPkg.xs2005-08-07 17:10:20.0 +0300 +++ libapt-pkg-perl-0.1.18+refcount2/AptPkg.xs 2006-04-23 14:20:41.966941342 +0300 @@ -25,6 +25,11 @@ #include utils.h +typedef struct { + pkgRecords *records; + SV *cache; +} _pkgRecords_struct; + /* XS has grief with colons */ #define Configuration_Item Configuration::Item #define pkgCache_PkgIterator pkgCache::PkgIterator @@ -484,7 +489,12 @@ CODE: pkgCache *cache = *THIS; pkgRecords *r = new pkgRecords(*cache); -RETVAL = sv_setref_pv(NEWSV(0, 0), AptPkg::_pkg_records, (void *) r); +SV *self = SvRV(ST(0)); +SvREFCNT_inc(self); +_pkgRecords_struct *s = new _pkgRecords_struct; +s-records = r; +s-cache = self; +RETVAL = sv_setref_pv(NEWSV(0, 0), AptPkg::_pkg_records, (void *) s); OUTPUT: RETVAL @@ -986,13 +996,17 @@ MODULE = AptPkg PACKAGE = AptPkg::_pkg_records void -pkgRecords::DESTROY() +_pkgRecords_struct::DESTROY() + CODE: +delete THIS-records; +SvREFCNT_dec(THIS-cache); +delete THIS; SV * -pkgRecords::Lookup(pack) +_pkgRecords_struct::Lookup(pack) pkgCache_VerFileIterator *pack PPCODE: -pkgRecords::Parser p = THIS-Lookup(*pack); +pkgRecords::Parser p = THIS-records-Lookup(*pack); string v; #define PUSH_PAIR(_name_) \ --- libapt-pkg-perl-0.1.18/typemap 2005-08-07 17:10:20.0 +0300 +++ libapt-pkg-perl-0.1.18+refcount2/typemap2006-04-23 14:13:33.765907499 +0300 @@ -15,7 +15,7 @@ pkgCache_PrvIterator * T_PKG_CACHE_PRV_ITERATOR pkgCache_PkgFileIterator * T_PKG_CACHE_PKG_FILE_ITERATOR pkgCache_VerFileIterator * T_PKG_CACHE_VER_FILE_ITERATOR -pkgRecords * T_PKG_RECORDS +_pkgRecords_struct * T_PKG_RECORDS pkgSourceList *T_PKG_SOURCE_LIST pkgSrcRecords *T_PKG_SRC_RECORDS
Bug#364430: ikvm should just use ecj
Package: ikvm debian/ecj doesn't allow the usage of ecj-bootstrap-gcj, please just use the ecj executable, and maybe build-depend on ecj-bootstrap-gcj. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#359153: patch from a suse list?
On Sun, Apr 23, 2006 at 09:50:30AM +0200, Robert Schulz wrote: I found a promising patch for suse-10 here: http://www.linux-club.de/ftopic57788.html Thanks. I also have a patch from the KDE bug tracking system, that I'd like to try. Both appear to be more or less the same btw. But anyway, as I have some problems getting kdebluetooth compiled atm it might take a little longer than anticipated. First I had to wait for some packages being recompiled due to the X transition, but it appears there's another problem with my sources, so stay tuned. Michael -- Michael Meskes Email: Michael at Fam-Meskes dot De, Michael at Meskes dot (De|Com|Net|Org) ICQ: 179140304, AIM/Yahoo: michaelmeskes, Jabber: [EMAIL PROTECTED] Go SF 49ers! Go Rhein Fire! Use Debian GNU/Linux! Use PostgreSQL! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364429: initramfs-tools: fails to boot with EVMS root
Package: initramfs-tools Version: 0.59b Severity: important Since I upgraded initramfs-tools from 0.53c - 0.59b (testing machine), new initramfs-es refuse to boot my EVMS root. The boot log is a little long to paste, but a summary follows: [boot] Loading, please wait... Begin: Loading essential drivers... [unix] Done. Begin: Running /scripts/init-premount ... [load sata, nic, etc.] Done. Begin: Mounting root file system... ... Begin: Running /scripts/local-top ... [load dm, md] Error returned from evms_open_engine(): No such file or directory mknod: sda: File exists mknod: sda1: File exists [repeat for all other drives and partitions] [start md0 and md1] Done. Begin: Waiting for root file system... ... At this point, it hangs forever. I'm actually not 100% sure what the EVMS error means, but AFAIK it can be related to a missing /var/lock. I can't, however, find anything in the initramfs-tools changelogs about that. Any ideas? -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (900, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: i386 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15.3 Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Versions of packages initramfs-tools depends on: ii busybox 1:1.01-4 Tiny utilities for small and embed ii cpio 2.6-11 GNU cpio -- a program to manage ar ii klibc-utils 1.2.4-1small statically-linked utilities ii module-init-tools 3.2.2-2tools for managing Linux kernel mo ii udev 0.089-1/dev/ and hotplug management daemo initramfs-tools recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#351646: atlas3: FTBFS: No rule to make .../3dnow/liblapack.so
clone 351646 -1 reassign -1 make 3.80+3.81.b3-1 severity -1 important thanks Hi, This seems to be a bug in make, so I think atleast the make maintainers should have a look at it. I've set the version to 3.80+3.81.b3-1, and this is my best guess of the version that first showed the problem. Kurt -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364432: cherrypy: package is obsolete and should be removed
Package: cherrypy Severity: normal Hello, CherryPy has suffered a major overhaul since its version 2 and is now very different from what it was on version 0.10. The code packaged in the cherrypy source package is old, obsolete and unmaintained. I mailed the maintainer about removing the package, and will be requesting the removal 7 days from now, if I get no answers. Thanks, -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-686 Locale: LANG=pt_BR.UTF-8, LC_CTYPE=pt_BR.UTF-8 (charmap=UTF-8) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364427: [INTL:nl] New dutch po-debconf translation
On Sun, Apr 23, 2006 at 01:46:01PM +0200, Kurt De Bree wrote: Please find attached the dutch po-debconf translation. This translation has been vetted by the review process of the debian-l10n-dutch team. Please add it to your next package revision, it should be inserted in your package build-tree as debian/po/nl.po, TIA. thanks! will be included in the next revision of netselect filippo -- Filippo Giunchedi - http://esaurito.net PGP key: 0x6B79D401 random quote follows: Endian little hate we -- Anonymous (?) signature.asc Description: Digital signature
Bug#350287: gij-4.0: infinite loop building ikvm on amd64
Kurt Roeckx writes: I have no idea how to give a more useful bug report. compile the source files in more than one pass and identify the problematic file(s)? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364419: python2.4: FTBFS: test_tcl hangs.
On Sun, Apr 23, 2006 at 01:24:55PM +0200, Matthias Klose wrote: Kurt Roeckx writes: Package: python2.4 Version: 2.4.3-3 Severity: serious Hi, Your package failed to build on a few arches with the following error: test_tarfile test_tcl make: *** [stamp-check] Terminated Build killed with signal 15 after 150 minutes of inactivity no, that looks like a buildd problem. See http://lists.debian.org/debian-python/2006/04/msg00118.html [EMAIL PROTECTED] doesn't seem to exist yet, so that mail probably didn't reach any of us. I can atleast explain 1 problem: test test_socket failed -- Traceback (most recent call last): File /build/buildd/python2.4-2.4.3/Lib/test/test_socket.py, line 449, in testSockName self.assertEqual(name, (0.0.0.0, PORT+1)) AssertionError: ('83.143.242.5', 50008) != ('0.0.0.0', 50008) It's running in a vserver, and 83.143.242.5 is the address of the vserver. You won't be able to bind to 0.0.0.0. - test_ioctl wants /dev/tty, is this device available or not readable (mips at least)? test succeeds otherwise. /dev/tty exists, but you don't really have a tty. Kurt -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364424: #364424 cdparanoia, gnome-cd, sound-juicer, gstreamer segfaults
Sound-Juicer also segfaults on the same function call. The cdparanoia module for gstreamer seems to be the problem. I believe that all programs should be fixed: 1. gstreamer with cdparanoia should not segfault. (Important) 2. gnome-cd and sound-juicer should detect a backend segfault and should not crash. (Whishlist) Cheers, Daniel van Eeden smime.p7s Description: S/MIME cryptographic signature
Bug#364433: xemacs21: find dialog does not open - assertion `GTK_WIDGET_VISIBLE (widget) == TRUE' failed.
Package: xemacs21 Version: 21.4.18-3 Severity: important open any file or buffer, edit - find: no gui reaction, at the same time console prints: Gtk-CRITICAL **: file gtkwidget.c: line 1589 (gtk_widget_map): assertion `GTK_WIDGET_VISIBLE (widget) == TRUE' failed. -- System Information: Debian Release: testing/unstable Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-em64t-p4 Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Versions of packages xemacs21 depends on: ii xemacs21-gnome-mule 21.4.18-3 highly customizable text editor -- ii xemacs21-gnome-mule-canna-wnn 21.4.18-3 highly customizable text editor -- ii xemacs21-gnome-nomule 21.4.18-3 highly customizable text editor -- ii xemacs21-mule 21.4.18-3 highly customizable text editor -- ii xemacs21-mule-canna-wnn 21.4.18-3 highly customizable text editor -- ii xemacs21-nomule 21.4.18-3 highly customizable text editor -- xemacs21 recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#361697: glib2.0: Please add add udeb: lines to shlibs file
Le samedi 22 avril 2006 à 23:08 +0200, Frans Pop a écrit : I've taken the liberty of preparing an NMU and uploading that to the 5-day delayed queue. If you disagree with this upload then please let me know. I'll do a maintainer upload soon, no need fo the NMU. Cheers, Sebastien Bacher
Bug#358617: linux-image-2.6.16-1-686: please enable CONFIG_IPW2200_MONITOR=y
I'm with Noèl on this one. Monitor mode should be enabled ASAP. I'm even getting firmware errors even not being able to enable monitor mode so I see no point on having it enabled. Prueba el correo Terra ( http://www.terra.es/correo ); Seguro, rápido, fiable.
Bug#152012: For roger philhower
How have you been, roger philhower Press Kription for roger philhower is ready. Please re-confirm your data. http://geocities.com/CorneliaTriplett7693 The Buyer as per our records: roger philhower your street if wrong order please help us to correct it Just visit our site above to make sure. Thank you, Lenard -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#135972: patricia magee 3.76%+ Quote for you
How are you, I have received your form applied. http://geocities.com/SallieHicks9639 Please hit the site above, Our office shall then re-confirm your infomation. With Ref to: patricia magee and your histroy is not an issue. All fin ance types have been Ap prove d for you patricia magee say never: http://geocities.com/KrystalDwyer7106/a.htm Regards, Dianna -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364386: texmacs: Segmentation fault at startup
On Sun, 23 Apr 2006 08:30:13 +0200 René van Bevern [EMAIL PROTECTED] wrote: Could you please try if it works when you move your TeXmacs directory out of the way? I.e. move ~/.TeXmacs somewhere else and try start it. OK, I got it running, and opening my file edited w/ WinTeXmacs. Last night, I downgraded to the TeXmacs in stable (1.0.4), to see if it would work so I could edit my paper. It started, but had a floating point exception when it tried to load my paper. This morning, I re-upgraded to the TeXmacs in testing to try what you wanted; it re-read the config directory as a version upgrade, started, and opened my file beautifully. So, TeXmacs from Testing works just fine now. The first TeXmacs used on this computer was the one from testing, and never worked until now. My ~/.TeXmacs directory is part of my home directory copied from my old FreeBSD workstation when I built my current computer; it was created by whatever version of TeXmacs FreeBSD had in ports in Jan. or Feb. It was either 1.0.5 or 1.0.6. A core dump file can be provided upon request. Since I am unable to make it crash, a core dump file would be really nice. Upload it somewhere or send it to my E-Mail address directly. Along with a core file, your configuration might be interesting to me. (the scm files in .TeXmacs/system) A gzipped core file and a tarball of my ~/.TeXmacs directory have been uploaded to http://www.elehack.net/texmacs-core. tm-config.tgz is the TeXmacs config as copied from FreeBSD, and tm-current.tgz is the TeXmacs config as it sits on my Debian machine with TeXmacs in stable working. - Michael -- mouse, n: a device for pointing at the xterm in which you want to type. -- Fortune Visit me on the Web: http://www.elehack.net pgp7zNpA7kyYv.pgp Description: PGP signature
Bug#364434: gwget2: FTBFS: mv: cannot stat `debian/gwget/usr/lib/epiphany': No such file or directory
Package: gwget2 Version: 0.96-2.1 Severity: serious Hi, Your package is failing to build with the following error: checking which epiphany to use... no epiphany installed [...] mkdir -p debian/epiphany-extension-gwget/usr/lib mv debian/gwget/usr/lib/epiphany debian/epiphany-extension-gwget/usr/lib mv: cannot stat `debian/gwget/usr/lib/epiphany': No such file or directory make: *** [install] Error 1 Kurt -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]